Loading project stuck on 100%

Hi all
This is so frustrating yet Im not sure if this is a fault or default behaviour.
I will load a project and then have to wait and wait. and wait
Eventually the project will load, but first it will prompt with "Where is the file 0000026.MTS" . I just click skip then. This issue is probably unrelated to my loading problem though....
My PC has 16GB of RAM. Intel Core i7 - 2600 @ 3.4GHz
I have a Sony camcorder that creates the avchd format
Is there anything I can do to speed up the process? So far I have disabled Antivirus scanning. I have also loaded latest drivers and firmware for all PC components.
Adobe Premiere Elements 9 is also up too date with patches
Please help.
Thank you

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Similar Messages

Can't load project after any Premiere CS4 update...

Premiere 4.0.0 works fine with my project. After updating to 4.1 or higher, my project no longer loads. Premiere shows the loading project indicator, goes away after 100% and then freezes.
Deleting all the cache directories doesn't fix the problem.
The only thing that works is re-installing Premiere 4.0.0.
I played around and noticed that if I hide the video files from Premiere before loading the project, the project will load and ask for the location of the video files. I click cancel and the project loads fine.
It seems that whatever the update does somehow confuses Premiere when loading my P2 video files.
But like I said, everything loads in Premiere 4.0.

Peter,
That is great news, and you are most welcome.
Hunt

Post OS10 upgrade, my screen is stuck at 100%

Hi
On 21st Sept, i got a message for updating my OS10, which I did.
Now, when the phone restarted it got stuck at 100%.
Waited for 8 hours, but still no chance of seeing my home screen.
So, i pulled the battery out, and replaced it after 30 mins.
Finally the home screen came, and my BB started working crazy. Nothin semt to work fine.
So i did a security wipe. now post which its stuck completely.
Anyidea, where i can get the link to download auto loader (official) and i can reset my phone as it was just taken out from the box. Or would i have to go to the service centre.
Please suggest.

Hi. I updated last night on my q10 and it froze on pink logo. I had taken out battery hoping this would resolve the problem but no. I need to work on this phone and I don't know what to do. What is a security swipe and how do I do that. My Facebook friends are all getting friend requests from me again. I can't make phone calls. Nothing. I am certain we are not the only people on this planet with this problem. I need tech support. A real person to talk me through this

Scanning and Repairing drive C stuck at 100%. - toshiba satellite l70d-a

Hello and thanks in advance:
Laptop model: toshiba satellite l70d-a
Age: 3 months old
Problem: when loading laptop Scanning and Repairing drive C stuck at 100%. Nothing elso than removing the battery. Started suddenly. I have tried to see if there were hd problems but found nothing. Ideas?
Not sure what to do. Can anyone help?

Here i what I have found running glary utilities:
Volume label is TI80145100B.
Glary Utilities 4 is verifying files (stage 1 of 3)...
329216 file records processed.
File verification completed.
1778 large file records processed.
0 bad file records processed.
Glary Utilities 4 is verifying indexes (stage 2 of 3)...
Index entry sessionstore.js in index $I30 of file 59559 is incorrect.
Index entry SESSIO~1.JS in index $I30 of file 59559 is incorrect.
Index entry e6eccf9166454d22f9ad07abdb6da390.png in index $I30 of file 59927 is incorrect.
Index entry E6ECCF~1.PNG in index $I30 of file 59927 is incorrect.
Index entry fb70939c8ecbd4faff2338ee6c5d2529.png in index $I30 of file 59927 is incorrect.
Index entry FB7093~1.PNG in index $I30 of file 59927 is incorrect.
Index entry 44 in index $I30 of file 75218 is incorrect.
Index entry 34 in index $I30 of file 77338 is incorrect.
Index entry 8E in index $I30 of file 77338 is incorrect.
Index entry 55 in index $I30 of file 104698 is incorrect.
Index entry 02 in index $I30 of file 132634 is incorrect.
Index entry FA in index $I30 of file 140243 is incorrect.
426568 index entries processed.
Index verification completed.
Errors found. Glary Utilities 4 cannot continue in read-only mode.
CheckDisk found 1 disk errors as follows:
C:\

One of my MSI GTX 780-fans gets stuck on 100% every now and then :(

Every now and then (randomly and not very often) one of the fans on my MSI GTX 780 gets stuck on 100% after windows 7 (64 bit) have loaded.
It is impossible to get it to slow down by using any software or by restarting the computer (or even by turning it off).
The Only way to get it back to normal functioning is to open the computer and stop the fan with my hands for a while. After that it works like it should, until next time this bug happens.
Has anyone experienced anything like it? Can it be solved or is the card broken?

flobelix will give you the program needed (a link to it at least) and the information of how to so it!
but he needs 2 things from you!
1: the serial number of your MSI GTX 780 (leave off the last 3 digits)
2: a copy of your cards current VBIOS (download this http://www.techpowerup.com/downloads/SysInfo/GPU-Z/ and run it and it will bring up GPU-Z and then click on the little icon at the end of BIOS Version and choose save to file (should be a under 1MB file) then upload it to somewhere like dropbox.com and give us a link to it there)

Error in Loading Project master Data into BW from R3

Hi Experts,
Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Date and Time          27.09.2011 01:47:15
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_CGPL_TASK==================CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "ME->OUTLINE_PARENT").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
I am seeking help from you guys.
Please help to overcome this problem...!
Thanks.

it seems basis issue
howver check below links
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
thanks
pathak

Disk Usage stuck at 100%, Factory installed windows 8 running like a turtle not being able to use my laptop. What should i do?

I have a HP Pavillion Sleekbook 15-b002ee with Third generation core i5 processor 1.7 GHz, 500 GB Hard disk and 4 GB of RAM installed. Windows 8 came pre installed on it.
I bought this laptop 11 months ago and it worked fine for 10 months and then from the last month its presenting unusual problems. My disk usage is stuck at 100% and the laptop freezes and never lets me work or do anything. Heres what i have already done
to solve the issue but have been unsuccessful:
1) I have reset my PC completely and reinstalled windows 8 using the factory setup. Didnt solve the issue, newly installed windows displays the disk usage 100% and the performance is same i.e the system freezes.
2) I have tried adjusting my paging file, no change made a difference to the performance of my laptop. The default system managed Paging file size is something around 3.89 Gb. Does my problem have anything to do with my paging file?
3) I have tried solving this issue by disabling the "Windows Search" and "Superfetch" services and still it didnt solve the problem.
4) I have also run checkdisk on my hard drive completely. It took me a complete day to do so but still no change.
5) Before resetting my laptop, an error called "Kernel_data_inpage(http.sys)" used to come on my upgraded windows 8.1. Whats the issue?
So what should i do? Is there any problem with my hardware? Is my hard drive having bad sectors and is that causing the problem? Or is there any other technical problem which i couldnt yet find out?
I have explained my problem in a lot detail and i would like a clear answer please, i have been at this issue for many days and this forum seems like the last place where i can find relevant answer because Google isnt helping.
Thanks in advance.

Ask here: http://h30434.www3.hp.com/.
This web site is for help in writing software and you are not planing in doing that. In the future, look around to see what others are saying before posting to a forum. If you can not understand what others are saying most likely you are in the wrong
forum, and chances. are your questions will be ignored .
If you are looking for help on a particular Microsoft product, start your search from support.microsoft.com instead of going to a random Microsoft forum. But since you got a HP laptop, chances are you have software prompted by HP as well, like antivirus/printer
applications etc, so better ask HP first.
Visual C++ MVP

Premiere CS4 will not load project

Hi! I've been looking around the forums for an answer to my problem, but so far I haven't found one. Here's my problem:
I've been working on a Premiere project for a couple weeks now, and I've constantly been having problems. It crashes often, and sometimes does not respond. This I do not mind, I just save whenever I do something.
Yesterday night, I tried to open my project. I opened it, and the little box popped up that said, "Load Project...". The loading bar went all the way to the end and then froze. In the bottom left corner, it had said that all media was loaded. I pressed cancel and then Premiere froze. I then exited Premeire and tried to reopen, but the same thing happened. I had read on one post to try to turning off your computer and then turning it back on. So, I went to bed.
Today, the project was working perfectly until now. This time, the loading bar only loaded about 75%, even though at the bottom it said that all media was loaded. I re-started my computer, but it didn't help. I pressed shift, but it didn't help. And the last time an auto-save file was created was yesterday, and I have made a lot of progress since then. Does anyone have a solution to this?
Frozen!
I have 64-bit Windows 7 Home Premium on an HP computer with and Intel Core 2 Quad CPU Q8400 2.66 GHz. The RAM is 6 GB. I don't know if this information will help you, but just in case.

I spent the day researching why my PrPro CS4 project hangs at about 80% loaded all of a sudden. Bill was right on in his suggestion to search for a corrupt or bad asset. His technique to solve the problem did not work at all though. Going back to a perviously auto-saved version of the project does not help much unless the project file itself is the bad asset. The project once saved under a new name still won't load in my experience. Also, if you try to export some part of the assets within the project, Adobe Media Encoder CS4 will fail to encode as well (another symptom of the bad asset hiding in your project workplace and sequence time-lines.
In my case, it turned out to be an avi movie asset that I changed from "avi movie with audio" to "avi movie without audio" outside of adobe premiere (using after effects cs4 in my case). So now the project thought there should be audio, but the audio was now removed.
To find the bad asset was pretty easy: First go back to a project version that you can load, then click on each asset in the project workspace area and try to copy the asset using the menu: edit -> copy.
If the asset is bad, a goofy error message will pop up including a source code file name [this has to be yet another bug in premiere to crash like this].
If the asset is good, the copy will report no error, so move on to the next asset, repeat until you find one or all bad assets.
To solve the bad asset load problem,re-import the asset under a new name. Go to your sequence, right mouse click on the asset in the time line, use the "replace with clip -> bin" command. Last step, select the new replacement asset from your bin.
Best regards,
Ron Fredericks
LectureMaker, LLC

Apple tv..loading photo stuck in loading library..have restarted-shared-music ok..

apple tv..loading photo stuck in loading library..have restarted…shared…music ok..
working yesterday for access to music and photos
cheers
bee man

Welcome to the Apple Community.
Most of us do not have this problem and can connect to our libraries on demand, it would therefor seem reasonable to assume that the issue lies somewhere other than iTunes or the Apple TV, my first thought is network issues, have you done anything to ensure it's not your network.

Macbook pro 17" 3g battery status indicator stuck on 100%

Battery status indicator stuck on 100% Worked normaly until today
resetting smc does not help
Battery Information:
Model Information:
Serial Number:          9G95201YS4M0A
Manufacturer:          DP
Device name:          bq20z951
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0042
Hardware Revision:          0001
Cell Revision:          0119
Charge Information:
Charge remaining (mAh):          65262
Fully charged:          Yes
Charging:          No
Full charge capacity (mAh):          65262
Health Information:
Cycle count:          221
Condition:          Replace Now
Battery Installed:          Yes
Amperage (mA):          -1629
Voltage (mV):          8072

I closed the lid for about 10 minutes to do something and when I came back the status seemed to be working correctly (80%) and the health now seems normal. I made no other changes. I will keep an eye on it and post if it goes haywire again. Thanks for your help
Battery Information:
Model Information:
Serial Number:          9G95201YS4M0A
Manufacturer:          DP
Device name:          bq20z951
Pack Lot Code:          0000
PCB Lot Code:          0000
Firmware Version:          0042
Hardware Revision:          0001
Cell Revision:          0119
Charge Information:
Charge remaining (mAh):          9833
Fully charged:          No
Charging:          No
Full charge capacity (mAh):          12217
Health Information:
Cycle count:          221
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -1550
Voltage (mV):          7930

IPhone 4s battery stuck at 100 percent. How do I get it back to normal?

iPhone 4s battery stuck at 100 percent. How do I get it back to normal?
Ever since the update, I am having issues with the battery. Phone shuts down while it still shows 100 percent battery life. Normally not a big deal because I don't use it all the time but lately an issue when I'm working in Manhattan and it shuts down while in the middle of conversation or emailing.
I can't go around charging it every hour wondering what my battery life really is.
Please help!

My phone now is not working at all. It only works for a few minutes while it is plugged into the wall and then it shuts down and pops right back up showing it has 75% battery. It has been doing this since yesteday afternoon.
I tried the reset and it is still acting up. Dreading having to take this to the Apple store since it is past the initial 90 days and I will probably get charged for it. :( Dont want to shell out money for a new one since I just got this one in October.
Thanks for your help.

Is down loading projects to DVD's a safe way to edit and save?

Yesterday I posted "Is down loading projects to DVD's a safe way to edit and save?". It got deleted. Being a newbe I got it in the wrong forum. I got it in "Post New Thread in Forum Comments". I was asked what path I used; I opened the home page. I ticked Discussions / Start New Discussion. I was so baited by the lure to post, I did not see the small "Adobe Forums" at the top and bottom of the page. I also did not understand the large "Post New Tread in Forum Comments". It was a bit confusing to me. But thanks to you guys I see the light.
I read the discussion I started in "Why do we keep moving Post?". I was branded as a lost soul. I want to thank all of you for helping find my way. No one was rude or even harsh. I have been on other Forums and if you make a mistake you get blasted.
I also want to thank you for all the answers I got for my original post. I read up on SATA and I can see that is where I need to make some changes to my portioned HD. I am sure I will be leaning on you for a lot of help for such a "Lost soul". And that I am. I am your typical 61 year old who got started late on computers.
The fact that my HD is portioned is not a good thing I learned. I am not sure if my computer has the Power Supply or the Mother Board to convert to SATA. My question is: Will eSATA work in place of the internal SATA?
Will I need two; one for editing and one for storage.
I have an outboard I Omega with about 650GB, I think. Not sure if it is SATA, but it has worked well for my backup videos and general files.
Thanks Again and I hope I got it right this time.
I'm timid about ticking the "Post Message" , but here goes......Ohhhhhhhhh.....

The system process in control panel MAY give you some of that information
It should ALL be available with the information the system builder gave you... he DID give you the paperwork that came with the individual components?
Taking the side panel off the case and looking inside with a flashlight might also help... but, of course, you'll need to know what it is you are seeing, and it sounds like you don't know much about hardware, so that may not help much
Sadly, if the person who built this "video editing" computer didn't really understand video editing, you are left with a computer that won't do what you want, and no easy way to make it work
You may need to find a computer shop to do this for you... and make sure part of their price is giving you a written list of everything you HAVE and everything they DO in the way of additions or configuration changes

Loading project files from Logic Audio 3.5 to Logic Express 8

I have been using an old Mac and a very old version of Logic (Logic Audio 3.5) for years now. I recently upgraded to a MacBook and to Logic Express 8. The user manual tells me that Logic Express 8 will load project files back to version 5. I have a number of recording projects semi-complete, in progress, or on hold and having to import individual audio files for each will be a major undertaking. Any suggestions on how I can import projects into my new set-up quickly and easily? I was diligent about keeping all files in separate folders on my old Mac - so all related files for a given project should be found in the same folder.

Yes. Logic 7 can import Songs in version 4 format. If you have Songs in that format, it only takes a few seconds to open & re-save each Song, & when you do they will be in version 5 format, which Logic 8 can read.
However, if your Songs pre-date version 4, your task will be much harder… you will have to find someone somewhere running a version of Logic that can read these, which at a guess would mean someone running System 9.2.2 or earlier!
As for speeding up your workflow… the conversion is quick, but updating old Songs to a contemporary setup will take as long as you're willing to spend on it!
(To be clear: when you convert, nothing changes except the Song version. All your assets — Audio files etc. — will still be looked-for in the same places.)

Premiere Won't Load Project

Premiere Won't Load Project from Splash screen. CS6
The splash screen finishes loading - I choose my project and the software hangs.
Just sits there!
OS 10.8.2
Thoughts? Thanks!

From the splash Screen instead of picking from the list on the splash screen I decided to choose OPEN and then choose the file and it seemed to work.

Have a problem ... not loaded project. Premier pro has encoutered an error [f:\ppro603_Win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe/k] }

Have a problem ... not loaded project. working on it for 8 months. never was nothing like this either with him or with other projects. When you load a project Premier generates an error .{ Premier pro has encoutered an error [f:\ppro603_Win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe/k] } Create the eve autosave project also not loaded. When I sav'd the project for the last time about the Premiere pro me warned about any problems and save projects without any problems. It is only one thing was unusual in the program - the timeline when switching between sikventsy constantly dropped as user's settings. And as usual. I tried to load the project from another computer. Import the project into the after Effects . import the project into a new project about Premier pro. But it did not solve the problem. all the time the error. Please help, a lot of work in this project. This is a great betrayal of the Premier pro...

Hi Pochtawood,
Yes, uninstalling iCloud will allow you to create new projects.
For legacy projects, you can repair them with a patch created by a user.
Details and links to the patch are here: Re: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
Thanks,
Kevin

Loading project stuck on 100%

Similar Messages

Maybe you are looking for