Local client copy with warnings and errors

Hi ,
I am doing a local client copy and is still running . There are a few large tables which have not been copied successfully and is shown under "Warnings and Error". The tables show "Program Cancel (See SM21)". In SM21 , I find the workprocess was disconnected from the database.
Now my questions is , once all the remaining tables complete , will I be given an option to repeat the copy for the failed tables only. The system is 6 TB and it is running for more than 15 days now.
Please suggest.
Regards
Ratnajit

will I be given an option to repeat the copy for the failed tables only
No, it doesn't ask you to repeat copy only for failed tables.
The system is 6 TB and it is running for more than 15 days now
What is the requirement to do such BIG client copy?
Regards,
Nick Loy

Similar Messages

Differences between client copy with sap_all and database copy

What's the difference between client copy with sap_all and doing a database copy.
I know if I do a database copy from Production to our Quality system.
I need to install the license key
restore the production library to the quality library
Initialize TMS and so on.
I know if I want to copy to our Development system. I would need to run either a remote client copy or and export/import since I cannot do a database copy because I would loose all my other clients in Development.
My question is, if the quality systems and the production systems are on the same support packs, same kernel.
What does a database copy give you (besides being faser) that a remote client copy or export/import of a client copy does.
Any differences
Thanks
Joe

Hello Joe,
If there is inconsistent Z tables between QAS and PRD, remote client copy could fail, especially when the table on PRD has longer length or more fields than the one on QAS.
Also the source client should has no-activity during the client copy, otherwise the application data could be inconsistent. For example, some material documents are copied, but not the corresponding financial documents. (For PRD client, it could be hours between the times those tables are copied.) For database restore, it is rarely an issue.
Best regards,
Victor

Client Copy with return code error :W

Hi Gurus,
When I am copying from Prod. client 500 to Quality Client 400 in (ECC 6), I am getting
'Program ended with error or warning, return code: W"
can any body please give soultions for this
Regards
Gokul

Hello Mr. Bhavik,
I had check in SCC3 client copy log and all error was got in test run, below gives details of log and examples of some table details log please help me what I can do?
Target Client     400
Source RFC Dest.:     CLNT500TRP
System Name:     TRP
Client in Source System     500
Copy Type     Remote copy
Copy Type     Test Run
Profile          SAP_ALL
Status          Completed w. Dictionary Errors
User          BASIS
Start on          27.03.2010 / 11:33:21
Last Entry on     27.03.2010 / 12:20:36
Statistics for this Run
No. of Tables         52598 of     54115
Deleted Lines     5394087
Copied Lines     31175343
Warnings and Errors
Table Name     Component     Package
A001     SD-MD-CM     DDIC Error        (See SE14)
A004     SD-MD-CM     DDIC Error        (See SE14)
A005     SD-MD-CM     DDIC Error        (See SE14)
A006     SD-MD-CM     DDIC Error        (See SE14)
A007     SD-MD-CM     DDIC Error        (See SE14)
A009     SD-MD-CM     DDIC Error        (See SE14)
A010     SD-MD-CM     DDIC Error        (See SE14)
A012     SD-MD-CM     DDIC Error        (See SE14)
A015     SD-MD-CM     DDIC Error        (See SE14)
A016     SD-MD-CM     DDIC Error        (See SE14)
A017     SD-MD-CM     DDIC Error        (See SE14)
A018     SD-MD-CM     DDIC Error        (See SE14)
A019     SD-MD-CM     DDIC Error        (See SE14)
A021     SD-MD-CM     DDIC Error        (See SE14)
Table Information
Table:                      A001
- Short Description:        Not Used in Standard
Package:                    VKON
- Short Description:        Application development R/3 conditions
Application Component:      SD-MD-CM
- Short Description:        Conditions
Delivery Class:             A
Table Type:                 Pooled table
Technical Information:
Nametab of Table is Correct
Table Exists in Database:   KAPOL
Table Information
Table:                      A028
- Short Description:        Info Record for Non-Stock Item
Package:                    VKON
- Short Description:        Application development R/3 conditions
Application Component:      SD-MD-CM
- Short Description:        Conditions
Delivery Class:             A
Table Type:                 Pooled table
Technical Information:
Nametab of Table is Correct
Table Exists in Database:   KAPOL
Regards
Gokul Borse
9881843629
Edited by: Gokul Borse on Mar 28, 2010 7:17 AM

Local client copy Error

I have fresh installed ECC 6.0 with HP UX. I want to do local client copy.but it give error
lient copy from 03.02.2009 23:20:18
ystem ID............................ QAS
arget client........................ 900
/3 Release.......................... 700
Basis Support Package...............SAPKB70009
ost................................. quality
tart in background............. .....X
ser................................. SAP*
arameter
ource client........................ 000
ource client user masters............000
opier profile:.......................SAP_ALL
able selection
ustomizing data .....................X
ith application data................ X
nitialize and recreate......... X
hange documents are not copied
est mode (without database update).. R
thanks
Manu

thanks for your reply.I have set my INDIA time in 001
But during client copy it gives system Log
Details Page 2 Line 9 RSLG0001 - SAP Analysis of the Central System Log       1
Time     SAP instance   Type Nr Clt User TCode Program Terminal Package Grp N Text
18:16:23 quality_QAS_00 BTC 008 900 SAP*                        SBAC    BY 4 Database error 24909 at SEL access to ta
Details
Recording at local and central time........................ 05.02.2009 18:16:23
Task...... Process                      User...... Terminal Session TCode Program Cl Problem cl         Package
04523      Background Processor No. 008 SAP*                      1               K SAP Web AS Problem SBAC
Module nam Line SQL functi Table Name
dbrepo     2655 SEL        REPOLOAD
Documentation for system log message BY 4 :
After the attempt to access a database table the database system has
returned an error code which indicates that the operation concerned
could not be performed successfully.
The text of the system log message shows the error number, an
identification of the operation and the name of the table concerned.
The following abbreviations are used for the database operations:
CLC - Closing a database cursor
CRT - Creating a table on the database
DEL - Deleting table entries
EXE - Immediate execution of a database operation
FET - Reading one or several records of a database cursor
INS - Inserting one or several records into a database table
PRE - Executing a PREPARE operation
SEL - Executing a database selection
UPD - Changing one or several records in a database table
echnical details
File Offset RecFm System log type    Grp N variable message data
   1 135000 g     Database SQL Error BY 4 24909 SELREPOLOAD                                   dbrepo 2655
Plesae suggest
RAJ

Local client copy error very..very......urgent

Hi experts,
while i am performing local client copy in background mode from 000 to 200
it is terminattin and it showing the below error
Target Client           200
Source Client                   000
Copy Type               Local Copy
Profile                 SAP_CUST
Status                  Cancelled
User                    SAP*
Start on                10.05.2008 / 14:53:00
Last Entry on           10.05.2008 / 14:53:51
Statistics for this Run
- No. of Tables                 0 of     53448
- Copied Lines                  0
Check System Log (SM21)
arnings and Errors
Table Name       Component Package
/1FB/MD___3M0001           DDIC Error        (See SE14)
/1FB/MD___3M0002           DDIC Error        (See SE14)
/1FB/MD___3M0003           DDIC Error        (See SE14)
/1FB/MD___3M0004           DDIC Error        (See SE14)
/1FB/MD___3M0005           DDIC Error        (See SE14)
/1FB/MD___3M0006           DDIC Error        (See SE14)
/1FB/MD___3M0007           DDIC Error        (See SE14)
/1FB/MD___3M0008           DDIC Error        (See SE14)
/1FB/MD___3M0009           DDIC Error        (See SE14)
/1FB/MD___3M000A           DDIC Error        (See SE14)
/1FB/MD___3M000B           DDIC Error        (See SE14)
/1FB/MD___3M000C           DDIC Error        (See SE14)
/1FB/MD___3M000D           DDIC Error        (See SE14)
/1FB/MD___3M000E           DDIC Error        (See SE14)
/1FB/MD___3M000F           DDIC Error        (See SE14)
/1FB/MD___3M000G           DDIC Error        (See SE14)
/1FB/MD___3M000H           DDIC Error        (See SE14)
and when i checkd in system log in sm21 it is showing
he transaction has been terminated. This may be caused by a
ermination message from the application (MESSAGE Axxx) or by an
rror detected by the SAP System due to which it makes no sense to
roceed with the transaction. The actual reason for the termination
s indicated by the T100 message and the parameters.
plz......any one can help me
cheers
deepak

Actually it is problem with my database
recently i restored my database after that i performd client copy
when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
finally i finished the my client copy with out any error
regards
deepak

Inconsistant transport requests after local client copy

Dear experts,
our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basic setup and cleanup in the new client, but I'm confronted with problems like objects being locked in orders/requests that cannot be changed in the new client, as they belong to the original source client.
How can I get rid of those inconsistencies? I'd preferred the new client without transports and without locked objects. Is it really necessary that I clean up this mess manually? Would it have been better to clean this up before the client copy? Or could we just do the client copy with another profile in order to avoid those problems?
Thanks for your appreciated help
Andreas

Hello,
Transports are NEVER part of a client copy.
In fact all the data of your transports is stored in tables that are client independent (E07* tables).
This means that you can view (not edit) always all transports from all clients in a specific system.
When you want to edit or release a transport the source client is important (in which client was the transport originally created).
This is stored in table E070C for all transports and can not be overruled.
So I recommend that you don't clean anything related to transports after a client copy because this will also impact the other clients !
Success.
Wim

Local Client Copy Error : Completed w. Dictionary Errors

Hi,
I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
Target Client             200
Source Client           100
Copy Type               Local Copy
Profile                      SAP_CUST
Status                      Completed w. Dictionary Errors
User                        I998769
Start on                   06.12.2009 / 12:47:59
Last Entry on          06.12.2009 / 14:00:12
Statistics for this Run
- No. of Tables            56872 of     58391
- Deleted Lines           5705995
- Copied Lines            5770444
Warnings and Errors
Table Name             Component          Package
A001                   SD-MD-CM           DDIC Error        (See SE14)
A004                   SD-MD-CM           DDIC Error        (See SE14)
A005                   SD-MD-CM           DDIC Error        (See SE14)
A006                   SD-MD-CM           DDIC Error        (See SE14)
A007                   SD-MD-CM           DDIC Error        (See SE14)
A009                   SD-MD-CM           DDIC Error        (See SE14)
A010                   SD-MD-CM           DDIC Error        (See SE14)
A012                   SD-MD-CM           DDIC Error        (See SE14)
A015                   SD-MD-CM           DDIC Error        (See SE14)
Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
   Start of post-processing by application exits 13:57:48
   Automatic postprocessing of client 200 was incorrect -> long text
   Post-processing required for FINB_TR_CC_EXIT_TARGET
   Validation/substitution: Programs should be regenerated
   Selected tables           :         58.391
   Copied data in kBytes :      2.933.491
   Deleted data in kBytes :      2.845.416
   Program ended with error or warning, return code: W
   Runtime (seconds)         :          4.333
   End of processing: 14:00:12
Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.

Hi,
We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
Any other options?
Jan
PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
If you still want to remove the inconsistency, you can proceed as described in the following. However, the table must be empty for you to be able to do this (you can check this with the report NROWS: start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
1. Call transaction SE14.
2. Edit DVPOOLTEXT.
3. Delete the database table.
4. Create a database table.
If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
Report NROWS mentions 116.390 entries for table A017.
In SE16 table A017 has 0 entries.
In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
Any tips?
Edited by: Jan Laros on Sep 8, 2010 2:25 PM

Need Help!! Errors during Local Client Copy

Doing a Local Client Copy and getting these error messages in the log:
Table Name       Component          Package
/1CN/CMFSAPH0FOR                    DDIC Error        (See SE14)
/1CN/CMFSAPH1FDT                    DDIC Error        (See SE14)
/1CN/CMFSAPH1FFX                    DDIC Error        (See SE14)
/1CN/CMFSAPH2TGR                    DDIC Error        (See SE14)
/1CN/CMFSAPH2TRM                    DDIC Error        (See SE14)
/1CN/CMFSAPH3TCT                    DDIC Error        (See SE14)
/1CN/CMFSAPH3TUS                    DDIC Error        (See SE14)
/1CN/CMFSAPH4TFX                    DDIC Error        (See SE14)
/1CN/CMFSAPH4TQU                    DDIC Error        (See SE14)
Then I go to SE14 then put the name of the tables then click CHECK >> DATABASE OBJECT and then as the result I get:
"Table is not created in the database"
If I go down to the database level and look within the Oracle database dba_tables the tables and objects exists within the database but SAP is unable to recognize them. All objects were imported with a Oracle Data Pump dump file and now I just need help in getting SAP to recognize the tables.
Edited by: Adam Gendle on Feb 19, 2010 12:29 AM

Hi,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Bhavik G. Shroff

Local client copy error - Table "BKPF" not edited due to excessive number

Hi,
I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
===
2 ETA163 Table "BKPF" not edited due to excessive number of errors
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "COEP" not edited due to excessive number of errors
3 ETA311 Process "00002" started on server "sfrndevsap15"
(time: "17:20:51")
2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
3 ETA311 Process "00003" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
0 0 17:20:52"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "HRP1001" not edited due to excessive number of errors
3 ETA311 Process "00004" started on server "sfrndevsap15"
(time: "17:20:52")
4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
0 29 17:21:21"
2 ETA057 WARNING: Cancelled several times
2 ETA163 Table "PCL4" not edited due to excessive number of errors
===
Please help ASAP, as this is effecting our testing team. I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client. This is also taking quite a long time.
Thanks in advance,
Abdul

Hi Abdul,
What does your system log say ?
Check this SAP Note
Note 579783 - CC ERROR: Loss of data - table not copied
run the report RSCC_VERIFY to check if the table is consistent within the source client.
SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
Regards,
Siddhesh

Local Client Copy Error in Post-Processing

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hello Gagan,
I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
The oss note says about component FINB-TR-DERIVATION.
I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
Thanks for your response and look forward to further help.
Regards,
Antarpreet

Local Client Copy error in post processing phase

Hello All,
We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice.
All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
Table Name Component Package
/SAPCND/CC_GROUP_WS_NG AP-PRC-CON Post-Processing Required
Following entires in the file logs are displayed:
Begin of GEN_STATUS Update
Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
No fields in structure /1CN/WS_ID_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
No fields in structure /1CN/WS_IS_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
No fields in structure /1CN/WS_ED_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
No fields in structure /1CN/WS_ES_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
No fields in structure /1CN/WS_UI_200MOM_TAX
Postprocessing necessary when upgrade has been completed
Begin of GEN_STATUS Update
Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
Can anyone guide me the best way forward.
Thanks,
Antarpreet

Hi,
You need not worry at all as this is not a warning (although marked
so in message), and its just an information so you are better able to run
the job RGUGBR00 in SE38 with all the options mentioned in message above
marked.
Regards,
Aidan

Local Client Copy and Remote Client Copy in MS - SQL Database

Dear Gurus,
If i need to do the local client copy or remote client what is the procedure i should consider because i'm using MS-SQL 2005 database.Most of the thread using Oracle database.Can u give me the step by step or manual how to make it.
Thanks an advance.
/Shah

Hi.
SAP Help is a very good source for info -> [Link|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm].
I suggest that you read the manual carefully. There are many tipps to improve performance (parallel processes) and tipps and tricks to avoid problems. If you need some notes, they are adviced there.
Also the notes [116787|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=116787], [552711|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=552711], [67205|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=67205] or [489690|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=489690] are interesting.
regards,
Martin

Condition record's not getting copied in local client copy !!!

Hi ALL,
I have a one question/doubt regarding local client copy.
Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
Message no. VJ000u201D
Can u pls suggest proper way to copy/transport condition record in new client created?
Regards,
C Singh.

Please refer below link
http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
Regards,
Pavan

Local Client Copy taking too much time

Hi All,
I recently done a system refresh of my Quality server (restore PRD backup to QUA Server)
After that I have created a new client and has initiated a local client copy after the test run
went successful.
Then after reading approximately 4500 table it has got stuck and I saw in SM50 that table "ACCTCR"
was running since approximately 56000 seconds.
Then I run the program 'BTCTRNS1" to clean the work processes.
After that I again restarted the local client copy in restart mode.
Now since last 3 hours I can see in SM50 that table u201CACCTCR" is being sequentially ready for approx 500(under Actions) seconds and then delete for 15 seconds (under actions).
I also found that table size is also not increasing as well as same table is being sequentially read for 500 sec and then deleted for 15 seconds (under Actions in sm50) and program is also same.
This is happening since last 3 hours now.
Under SCC3 I can see the status as processing reset.
Does anyone face this issue ever? And can anyone suggest is everything is running OK or there is
some problem.
Your suggestions will be highly appreciated.
Regards,
PG

Hello,
Did you recalculate full DB statistics after the last system copy from PRD to QA ?
This is very often forgotten, leading to long elapse times in select statements.
Check via DB20 on table ACCTCR from when latest DB statistics date.
Eventually rebuild all indexes from ACCTCR, this can be done online via ABAP RSANAORA if you are running Oracle.
You can also perform an SQL trace on the current running process to see if the select from the client copy is running correctly.
I also know that ACCTCR is a table containing transactional data and most of the time it contains a lot of data.
II suppose you are running a client copy with profile SAP_ALL on QA based on a copy of PRD ?
This means that you will end up with 2 production clients in QA ?
Is your QA system sized for this ?
Another question that you can ask your client, is data from ACCTCR really needed on QA on both clients.
If not it is maybe better to start an archiving based on SAP Note :
Note 83076 - MM_ACCTIT: Archiving programs for ACCTIT, ACCTHD, ACCTCR
Followed by a new client copy.
Success.
Wim

Can we create a local client copy for the RFID Client in discovery Box

Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not .

This isn't possible with Live Mail. Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.

Local client copy with warnings and errors

Similar Messages

Maybe you are looking for