Local Process chain getting failed

Hi All,
My local process chain is getting failed due to the following error.
"Job started
Step 001 started (program RSPROCESS, variant &0000000068733, user ID ALEREMOTE)
Start process CHAIN EC_EW_M_COMPLAIN_ZMTCOCR1 in run 1HN75DVW2PG2WFU98WGFIXOGV of chain EC_EW_M_TRAN_L1
Communication buffer deleted from previous run F0CDWKC96L0O0D8NQBGVHYK9R (status X)
Chain Is OK
No job found
Job cancelled after system exception ERROR_MESSAGE"
How to resolve this issue?
Thanks,
Sathya

Hi
Communication buffer deleted from previous run F0CDWKC96L0O0D8NQBGVHYK9R (status X)
This means, the previous step is completed and system should get the status as G(green), but in above system got this  as X(Deleted). That's why system unable to start the next process(your local chain).
I don't think, this is an issue with background processes.
try to repeat the step once again and monitor the display messages, if you get same error again check process type before this local chain.
Regards,
Venkatesh

Similar Messages

  • Local process chain is failing and i want to run its successor chain

    Hello All,
    I have a query regarding process chain, which is :
    I have a metachain, in which some local chains are existing.
    If suppose local process chain 2 is failing and i don't want to run that i want to run local process 3 directly
    (which is successor of chain 2 ).
    What should i do?
    Regards,
    Dolly

    Hi,
    You can trigger the process chain as below:
    Go to TC SE37 -
    > use function module RSPC_CHAIN_START -
    > execute -
    > put your process chain's technical name in variant  I_CHAIN -
    > Execute -
    > specify job priority
    Cheers
    Chanda

  • "Save Hierarchies" step in Process chain getting failed

    Hello all,
    After searching thoroughly through various links / forums, i failed to get a solution. So, I am posting here.
    Recently we had a system copy. After that, in Quality system - "Save all Hierarchies" step in PC is getting failed.
    I ran the process chain for 3 times till now:
    1) Sometimes, it fails at batch monitor itself with UNCAUGHT_EXCEPTION runtime error.
    2) Sometimes, it fails saying "Error 0 when reading PSA 1" & "No hierarchy found for the selection criteria entered".
    When it fails with "Error 0 when reading PSA 1", then the above Hierarchy info package which is green automatically turns RED again with Process monitor saying "No PSA tables for the selection criteria".
    I also went through the below sdn links.
    http://scn.sap.com/thread/278794
    http://scn.sap.com/thread/1753212
    Things I did:
    1) Tried replicating & activating the Transfer rules and Data source.
    2) Repeated the step, as suggested in one post.
    3) Refreshed the OLTP hierarchies in Infopack. selections.
    I have attached a screenshot of a sample Data source which says Modified, though the transfer rules are active. Also, the process chain sample.
    Please let me know, if someone has faced this issue. Whatelse did I miss? Any clue.
    Thanks,
    Vikranth.

    Hi Raman,
    I couldn't retransport, but i removed it from schedule and re-activated it. But, i think the issue lies with one of the Info objects 0PROFIT_CTR.
    Because, when i tried to check the hierarchy structure; there are duplicate entries for one code. Can we delete one of them? Is it preferable.
    I tried using OSS and used a program RSR_REPAIR_INFOAREAHIER but this showed no errors.
    Any clue?
    Thanks,
    VIkranth

  • Local Process Chains

    HI Guys,
    I am in the process of designing the process chains for data loading. I have a situation where I am planning to use local process chains in the meta chain. Situation is like this:I have created Meta Chain for Master Data loading, which is having 2 local process chains, one is for Attributes and another is for loading texts. I placed them in the sequential order. First Attributes chain and on successful completion of Attribute chain it should run the Text process chain. But in the system it executes the Attribute chain successfully but the text process chain is always in the YELLOW( in progress ) state even though in that process chain I have only start process. In the SM50 it shows two background process with the user id ALEREMOTE, but process chain never finishes. In the Messages of the Text process chain I see the message"Communication buffer delted from the previous run ".
    So I put the process chains in the parallel manner, meaning after start process of Meta chain I attached the two process chains so that they should execute simultaneously. But in this case too, Attribute local process chain gets executed but not the Text local process chain.
    We tried debugging the process in SM50, it seems that there is some infinite loop.
    If anybody has any clue then please reply back at your earliest. Your help is highly appreicated,
    Thanks.
    Santosh Taware

    first point, i think you can have single process chian for both attributes and texts one after other.
    second thing check in st22 if any dumps are occuring and check in the monitor in which step it is still running.
    reward if helps.

  • ABAP Program for set local process chain failed

    I would like to execute ABAP Program in local process chain. If the condition is in the pre-defined bussiness rule, local process chain is set to fail.
    Currently I use ABAP and Raise Message Error = Message Type E for cancel program. After program is cancelled, local process chain don't know its status, wait for job SAP_CCMS_MONI_BATCH_DP  to determine status of process chain and then further execute subsequent process.
    I 'm not sure that our solution is right or not about set process chain to fail via ABAP. Please suggest us if there are other solution to set process chain as failed.

    Hi.
    Plz see my answer to similar question in [this thread|Re: Manage a message at the end of process chain on Web planning Application].
    Regards.

  • How to trigger a local process chain to run manually

    Dear Experts,
    In my company, I have a Daily process chain.
    In this Daily process chain, it contains many other local process chains which are grouped by modules.
    For example, I have created the following 3 process chains:
    - Accounts Receivables Process Chain which contains all the required process for loading FIAR data.
    - Accounts Payables Process Chain which contains all the required process for loading FIAP data.
    - Inventory Process Chain which contains all the required process for loading  Stocks data.
    These 3 process chains are scheduled one after the other in the main process chain which is called Daily Process Chain.
    FIAR needs to be successful before FIAP can run and Inventory chain will run only after FIAP is successful.
    Normally it runs without any problems.
    But recently, when the previous chain is successful, the next process chain does not get triggered to run.
    In the end, I have to manually execute the remaining process chains to start running.
    With this, all data are loaded, but the Daily Process Chain status for the day is yellow because it is not complete.
    Is there a program or method which I can execute or use to trigger the process chain to continue to run in the Daily Process Chain? If there is, please let me know so that I can avoid having to run the process chains manually one by one.
    Thanks in advance for your help.
    Regards,
    Shunhui.

    Check thid thread with the similar issue:
    Process Chain - Node untriggered.
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains

  • Metachain in Process chain is failed

    Hi friends,
    yesterday process chain was failed because of some errors.
    after correcting i did manual load to all as in the meta chain .
    Today process chain was failed because of the same meta chain not even running. there is no process monitor option and displaying messages are said previous job is running still.
    So please advice i need to start that meta chain and it should run normally from tomoro...
    Please help me in this regard...
    Regards
    Anil

    u can proceed with the immediate schedule of that local chain for today and then do as what I have suggested.. this will resolve ur issue..
    Meta chain was running fine in  ur case with the Direct Schedulign option.. bcz it might have been with the immediate schedule in the scheduling screen.. .. If that is the case then the Process chain will allow this settings for the Local chains to run as per the sequence..
    After todays manual run.. u can deschedule the entire chain once and then reschedule with the proper time details and the periodicity..
    Thanks
    Assigning poins is the way to say thanks... If ur issue is resolved then u can close this thread by assigning points..

  • Process chain Gettin failed

    Hi,
    when i run a Process chain for Transcation data the chain getting failed giving the following error message
    Job started
    Step001  Step 001 started (program RSPROCESS, variant &00000000730, user ID BWREMOTE) S 00 550
    ABAP/4PROCESSOR:MESSAGE_TYPE_X
    Job cancelled
    I run this chain for every one hour.
    could any one please suggesst me how to resolve this error.
    Thanks

    So your PC is getting failed Immediately with shortdump?
    Goto ST22>you can find the short dump (Message_type_x ), if you go through the short dump you can find the CUBE name some where here, so that is cube which making issue, go to that particular cube>check whether any request are running(there may be some loads which shows it is running, but if you check in detail it may be failed, but QM status doesn't changing for some reason, this may lead the chain to Short dump
    If you use any BIA in your cube, then check them too..
    Goto RSDDV> Select the CUBE>clik on BIA index( Maintenance wizard)-->if it is running, delete and then rebuild the index.
    Now goto your PC and Execute it, it shouldn't fail with Message_type_x
    Hope it helps!

  • Due to attribute change run(sid's is missing)...process chain is failed

    Hi All,
    Due to attribute change run (SID's is missing) process chain is failed.kindly suggest me how we can rectify for this issue.
    Thanks
    Ragav

    if master data is loading at same time while the attr/hier change run is occuring,it cause the change run to fail.
    Usually u get error message like..user ALEREMOTE has locked the MD tables..
    Wait for some time and then try attr change run manually by going to rsa1->tools->apply hier/attr change..
    if it still shows locked..try to see in rsmo if a MD load has got stuck..
    else..see in sm12 to find lock is on which tables..
    last resort..delete lock forcefully from sm12..
    first option is wait for some time and give a try again..
    cheers,
    Vishvesh

  • Process Chain gets unschedule after execution

    I've created 1 event based process chain
    i'm triggering this event from an abap program.
    but after executing the process chain, the process chain gets unschedule automatically. I've used BP_RAISE_EVENT FM to trigger the event.
    Thanks in advance.

    Hi AG,
    Can you please check the value of profile parameter:
    rdisp/rfc_min_wait_dia_wp in you remote BW system. Is it 1?
    If that is the case please increase the value to a more suitable value. This will determine the number of waiting dialog work processes in your system.
    It is dynamically switichable. Please try this out and check the results.
    Please award points if issue got solved.
    Regards.
    Ruchit.

  • Schedule local process chain

    Hi, I have a requirement to schedule local PC to run every 8 hrs instead of daily as it does now.  Local process chain is called within a meta chain.  Is there a way I can schedule local process chain separately within a meta chain or I have to change schedule for the entire meta chain? 
    Thanks!

    No need to change schedule for the entire meta chain. U should schedule local process chain separately.
    For local chain change mode
    Right click 'Start Variant' -> Maintain variant -- Direct Scheduling -- Change Selections
    Enter Date/Time... Select periodic Job
    Periodic Values -- Other period -- enter 8 for Hour(s)
    If u r using company calender -- Select 'Restrictions' -- enter Calender ID
    Save -- Activate - Schedule
    Local PC will run for every 8 hrs from the time u specified, and also run in metachain (once in a day if metachain runs daily)

  • How to change local process chains job priority to A?

    hi experts,
    there are process chains are running in BW production system.
    for independent process chain when i forcefully change JOB PRIORITY from C to A last night it was executed successfully with PRIORITY A, but whereas i have meta chain in that there are some local process chains, though i forcefully change the JOP PRIORITY in PRODUCTION TO A, still those local chains were executed with JOB PRIORITY C only.
    Can you tell me the reason and solution to change the local process chain as well with JOB PRIORITY A.
    The metachain with JOB PRIORITY shows my userid, and the local chains shows BW_USER id.
    Regards
    venuscm
    Edited by: venu WAD on Nov 18, 2011 6:37 AM

    Check what's job priority for particular cube in TA RSRT->double click on your chain->menu Process chain->Attributes->Job Priority. Via this you can set priority as you need.

  • Local Process Chain

    Hi Friends !
    We have one "Main Process Chain' within the main process chain there is a "Local Process Chain". Main PC is scheduled at 2 PM.
    Ques : For the Local Process Chain, will the start variant be "Immediate"? Please advise.
    With Regards
    Rekha

    Rekha,
    There shouldn't be any problem even the local chain is set to "Immediate". it all matters with the Meta chain, the subsequent local chains are taken care during the Meta chain run.
    In the scheduling option of the Local chain start variant ,you can select either of the options Direct or Start using metachain.
    We have Direct shceduling for our local chains(with in the Meta chain) and there has been no problem.  this will be an advantage to maintain with the option "Direct shceduling", so that whenever you want to run the local chain seperately, there will not be any need to change any setting. else if you use "Start Using Meta chain or API", each time you have a need to run the local chain the setting has to be changed to "Direct shceduling" before executing it.
    Regards,
    Sudheer
    Edited by: Sudheer Kumar Kurra on Oct 17, 2011 9:30 AM

  • Local Process Chain becomes inactive

    Hi BWers,
    We are having problems with our process chain wherein one of the local process chain becomes inactive. Here's the job log of the BI_PROCESS_CHAIN job. Will give points even for those who can give hints, better if solved.
    1. Job started
    2. Step 001 started (program RSPROCESS, variant &0000000753000, user ID BATCH_AP1)
    3. Version 'M' of chain YWAR_MPC_INTERRUPTS_MD_TD was saved without checking                
    4. Chain Is OK       
    5. Version 'A' of chain YWAR_MPC_INTERRUPTS_MD_TD was saved without checking
    6. Object with runtime number                          0' not defined
    7. Job cancelled after system exception ERROR_MESSAGE
    Thank You in advance!

    Hi
    you have pasted the process chain log, as the process was terminated, i required the dump information from the st22 and system messages from the sm21 concerned messages.
    Please provide the above infomation to resolve your problem.
    Regards
    Anwer Waseem
    SAP BASIS

  • Schedule Local process chain (by fac calender) in a daily meta chain

    Hello SAP Gurus,
    We have a meta chain (e.g. M1) which runs daily. Within this meta chain (M1), a local process chain (e.g. LP1) is attached. This LP1 should run once a month on a Monday (defined in factory calendar). Please note LP1 can not be scheduled separately by factory calendar, as it depend on few activities in daily meta chain. I think LP1 can be scheduled by using the decision in meta chain. I have rough idea of the formula, but not sure. Can you please suggest what should be the suitable formula in decision to schedule it.
    Example formula:
    DATE_WEEKDAY1(Current Date, 'P1' ) = '1'
    Where
    DATE_WEEKDAY1 = Calculate weekday Number from Date
    P1 = Factory Calendar for one year. Only 12 days (Monday) are open. For example 17 Jan, 14 Feb 2011, etc

    No need to change schedule for the entire meta chain. U should schedule local process chain separately.
    For local chain change mode
    Right click 'Start Variant' -> Maintain variant -- Direct Scheduling -- Change Selections
    Enter Date/Time... Select periodic Job
    Periodic Values -- Other period -- enter 8 for Hour(s)
    If u r using company calender -- Select 'Restrictions' -- enter Calender ID
    Save -- Activate - Schedule
    Local PC will run for every 8 hrs from the time u specified, and also run in metachain (once in a day if metachain runs daily)

Maybe you are looking for