LocalStorage broken since update

Hi,
I'm using localStorage to store answers inside an html widget. Everything was fine, but it stopped working since I upgraded my iPad (iOS 5.1 and iBooks app update).
Is anyone experiencing the same problems ?

The following snippet works for me, both with Dashcode and inside an HTML 5 widget in iBooks:
    var text = document.getElementById("text");
    if (typeof(Storage) !== "undefined")
        if (!localStorage.lastname)
            localStorage.lastname = "Smith";
            text.innerHTML = "Set name: " + localStorage.lastname;
        else
            text.innerHTML = "Get name: " + localStorage.lastname;
    else
        text.innerHTML="No local storage";
The values in local storage persist accross invocations of the widget, and they persist if you close a book and open another one, or shut down iBooks and restart it.
So, as far as I can tell, it's working, at least for me.
Michi.

Similar Messages

  • Mac App Store broken since updating to 10.7 Lion

    Hi all,
    Since updating to OS X 10.7 Lion my Mac App Store seems to be broken.
    The app starts but when I go to 'Purchases' it says I haven't purchased anything.  Now, it DOES come up with my purchases after a while so I assume that's just internet latency but when I try to review or rate OS X 10.7 Lion it says:
    "To rate this app, you must have purchased it from from the Mac App Store."
    Since I'm writing this post while my Macbook Pro is booted into Lion, I find that a bit odd.
    Any suggestions?  My first impressions of Lion aren't as great as some, that's for sure.

    I'm having the same issue on my iMac. I've also noticed the rear of the left side is getting a lot hotter than normal.
    I downloaded (from: http://support.apple.com/kb/DL1459) the update again and reinstalled it. But nothing's changed. Is there anything else I can try?
    Scott

  • TS1717 iTunes broken since update. Any ideas?

    Since the update, not only can I not access the iTunes store (It begins to load, but crashes within seconds, freezing my whole computer), but my library is messing up too. I can't skip ahead on videos, and some won't even load at all. I have tried uninstalling/reinstalling iTunes, but it has done nothing at all. Any help or fixes would be much appreciated.

    Rotation lock is now a software function on the taskbar in 4.2 and the button now mutes notifications e.g. so that you can watch videos or listen to music without hearing email notifications etc.
    Rotation lock : double-click the home button, slide from the left, and its the button far right; press home again to exit the taskbar; repeat to switch off rotation lock.

  • Flash for Mac Broken since update

    This is the case running both Safari and Firefox on a Mac Pro, OSX 10.6.3:
    Since the update previous to Flash 10, and now with Flash 10 as well, I get blank windows with Flash content on Adobe's own pages (What's new in Light Room 3) and on the NAPP Light Room 3 Learning Center page, among others.
    Additionally, I've changed my Flash settings in the Flash Control Panel to ASK before allowing 3rd party flash content to play. This worked for awhile but now when I find a window asking permission to run the vid and hit Okay, all I get is an endless pinwheel.
    I've tried to open the Flash Control Panel to mess with the settings, but now that window will not register mouse clicks and there is nothing I can do with it.
    fp

    I suggest you post your question on the MIcrosoft Mac forums since it's their software you're having trouble with...
    http://answers.microsoft.com/en-us/mac

  • N78 transitions broken since update

    According to the changelog of what issues the firmware update was meant to fix, display colour corruption was one of them. I didn't even have this to begin with, but now I do! Before the update when the camera key was held, the screen's orientation would visibly flip to the side, but now it just goes blank for a moment instead
    It's the same when the browser screen is rotated, and the "gliding" effect of the selection square in the apps menu has gone too.
    Not to mention since they've "tweaked" the sensitivity of the navi-wheel it's next to useless. Ugh.
    Has anyone else had these problems since the update?
    Solved!
    Go to Solution.

    Well I feel stupid! I was checking through the themes/settings menus etc. but couldn't find the option for transitions, now I see they're called "Theme effects". Thank you once again psychomania
    (that said I'm still not happy with the decreased Navi-wheel sensitivity!)

  • [Workaround] Resume broken since updating yesterday

    Hello,
    after updating my arch system yesterday resuming from suspend to RAM does not work anymore (which worked like a charm for a long, long time now), any help on this would be greately appreciated.
    Edit: The symptoms: Acer C110 (integrated Intel 855GME graphics) with standard arch linux install (nothing from /extra) suspends fine, then on resume the suspend-LED goes to green and that was it - black screen, no HD activity, no reaction to keyboard input (switching to VT or something like that) - nothing. Only hard reboot works.
    During the update a new kernel version and new pm-utils package have been installed (pacman.log):
    [2009-03-14 09:39] synchronizing package lists
    [2009-03-14 09:39] starting full system upgrade
    [2009-03-14 09:44] warning: /etc/man.conf saved as /etc/man.conf.pacsave
    [2009-03-14 09:44] removed man (1.6f-2)
    [2009-03-14 09:45] upgraded groff (1.20.1-1 -> 1.20.1-2)
    [2009-03-14 09:45] it's recommended to create an initial
    [2009-03-14 09:45] database running as root:
    [2009-03-14 09:45] "/usr/bin/mandb --quiet"
    [2009-03-14 09:45] installed man-db (2.5.4-2)
    [2009-03-14 09:45] upgraded attr (2.4.41-1 -> 2.4.43-1)
    [2009-03-14 09:45] upgraded cabextract (1.2-1 -> 1.2-2)
    [2009-03-14 09:45] upgraded curl (7.19.3-1 -> 7.19.4-1)
    [2009-03-14 09:45] upgraded libxi (1.2.0-1 -> 1.1.4-2)
    [2009-03-14 09:45] upgraded gtk2 (2.14.7-1 -> 2.14.7-2)
    [2009-03-14 09:45] upgraded claws-mail (3.7.0-1 -> 3.7.1-1)
    [2009-03-14 09:45] upgraded claws-mail-extra-plugins (3.7.0-1 -> 3.7.1-1)
    [2009-03-14 09:45] upgraded pam (1.0.3-1 -> 1.0.4-1)
    [2009-03-14 09:45] upgraded coreutils (6.12-1 -> 7.1-2)
    [2009-03-14 09:45] upgraded dhcpcd (4.0.10-1 -> 4.0.12-1)
    [2009-03-14 09:45] upgraded e2fsprogs (1.41.3-2 -> 1.41.4-1)
    [2009-03-14 09:45] upgraded faac (1.26-1 -> 1.28-1)
    [2009-03-14 09:45] upgraded grep (2.5.3-3 -> 2.5.4-1)
    [2009-03-14 09:45] The package is built using sysv ipc. If this causes segfaults
    [2009-03-14 09:45] see included README file and rebuild the pkg --with-ipc=tcp
    [2009-03-14 09:45] upgraded fakeroot (1.12.1-1 -> 1.12.2-2)
    [2009-03-14 09:45] upgraded xulrunner (1.9.0.6-1 -> 1.9.0.7-1)
    [2009-03-14 09:45] upgraded firefox (3.0.6-1 -> 3.0.7-1)
    [2009-03-14 09:45] upgraded flashplugin (10.0.15.3-1 -> 10.0.22.87-1)
    [2009-03-14 09:45] upgraded ghostscript (8.64-2 -> 8.64-3)
    [2009-03-14 09:45] upgraded gnome-screensaver (2.24.1-1 -> 2.24.1-2)
    [2009-03-14 09:45] upgraded gnupg2 (2.0.10-2 -> 2.0.11-1)
    [2009-03-14 09:45] upgraded gpm (1.20.5-2 -> 1.20.6-1)
    [2009-03-14 09:45] upgraded gstreamer0.10 (0.10.21-2 -> 0.10.22-1)
    [2009-03-14 09:45] upgraded gstreamer0.10-base (0.10.21-1 -> 0.10.22-1)
    [2009-03-14 09:45] upgraded gstreamer0.10-bad (0.10.9-1 -> 0.10.10-1)
    [2009-03-14 09:45] upgraded gstreamer0.10-bad-plugins (0.10.9-3 -> 0.10.10-1)
    [2009-03-14 09:45] upgraded gstreamer0.10-base-plugins (0.10.21-1 -> 0.10.22-1)
    [2009-03-14 09:45] upgraded gstreamer0.10-good (0.10.11-1 -> 0.10.14-1)
    [2009-03-14 09:45] upgraded libv4l (0.5.7-1 -> 0.5.8-1)
    [2009-03-14 09:45] upgraded gstreamer0.10-good-plugins (0.10.11-1 -> 0.10.14-1)
    [2009-03-14 09:45] upgraded hdparm (9.10-1 -> 9.12-1)
    [2009-03-14 09:45] upgraded imagemagick (6.4.9.2-1 -> 6.4.9.7-1)
    [2009-03-14 09:45] upgraded kbd (1.14.1.20080309-2 -> 1.15-1)
    [2009-03-14 09:45] upgraded util-linux-ng (2.14-1 -> 2.14.2-1)
    [2009-03-14 09:45] upgraded udev (135-1 -> 139-1)
    [2009-03-14 09:45] upgraded initscripts (2009.01-1 -> 2009.03-2)
    [2009-03-14 09:45] upgraded iw (0.9.8-1 -> 0.9.9-1)
    [2009-03-14 09:45] installed kernel26-firmware (2.6.28-1)
    [2009-03-14 09:45] >>> Updating module dependencies. Please wait ...
    [2009-03-14 09:45] >>> MKINITCPIO SETUP
    [2009-03-14 09:45] >>> ----------------
    [2009-03-14 09:45] >>> If you use LVM2, Encrypted root or software RAID,
    [2009-03-14 09:45] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2009-03-14 09:45] >>> More information about mkinitcpio setup can be found here:
    [2009-03-14 09:45] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2009-03-14 09:45]
    [2009-03-14 09:45] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2009-03-14 09:45] ==> Building image "default"
    [2009-03-14 09:45] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2009-03-14 09:45] :: Begin dry run
    [2009-03-14 09:45] :: Parsing hook [base]
    [2009-03-14 09:46] :: Parsing hook [udev]
    [2009-03-14 09:46] :: Parsing hook [autodetect]
    [2009-03-14 09:46] :: Parsing hook [pata]
    [2009-03-14 09:46] :: Parsing hook [scsi]
    [2009-03-14 09:46] :: Parsing hook [sata]
    [2009-03-14 09:46] :: Parsing hook [filesystems]
    [2009-03-14 09:46] :: Generating module dependencies
    [2009-03-14 09:46] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2009-03-14 09:46] ==> SUCCESS
    [2009-03-14 09:46] ==> Building image "fallback"
    [2009-03-14 09:46] ==> Running command: /sbin/mkinitcpio -k 2.6.28-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2009-03-14 09:46] :: Begin dry run
    [2009-03-14 09:46] :: Parsing hook [base]
    [2009-03-14 09:46] :: Parsing hook [udev]
    [2009-03-14 09:46] :: Parsing hook [pata]
    [2009-03-14 09:46] :: Parsing hook [scsi]
    [2009-03-14 09:46] :: Parsing hook [sata]
    [2009-03-14 09:46] :: Parsing hook [filesystems]
    [2009-03-14 09:47] :: Generating module dependencies
    [2009-03-14 09:47] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2009-03-14 09:47] ==> SUCCESS
    [2009-03-14 09:47] upgraded kernel26 (2.6.28.5-1 -> 2.6.28.7-2)
    [2009-03-14 09:47] upgraded klibc-udev (135-2 -> 139-1)
    [2009-03-14 09:47] upgraded orbit2 (2.14.16-1 -> 2.14.17-1)
    [2009-03-14 09:47] upgraded libbonobo (2.24.0-1 -> 2.24.1-1)
    [2009-03-14 09:47] upgraded libbonoboui (2.24.0-1 -> 2.24.1-1)
    [2009-03-14 09:47] upgraded libglade (2.6.3-1 -> 2.6.3-2)
    [2009-03-14 09:47] upgraded libgnomeprint (2.18.5-1 -> 2.18.6-1)
    [2009-03-14 09:47] upgraded libgnomeprintui (2.18.3-1 -> 2.18.4-1)
    [2009-03-14 09:47] upgraded libgnomeui (2.24.0-1 -> 2.24.1-1)
    [2009-03-14 09:47] upgraded libmad (0.15.1b-3 -> 0.15.1b-4)
    [2009-03-14 09:47] upgraded libpng (1.2.34-1 -> 1.2.35-1)
    [2009-03-14 09:47] upgraded libsndfile (1.0.18-1 -> 1.0.19-1)
    [2009-03-14 09:47] upgraded sqlite3 (3.6.10-1 -> 3.6.11-1)
    [2009-03-14 09:47] upgraded libwebkit (1.1.0-0.40663 -> 1.1.0-0.41121)
    [2009-03-14 09:47] upgraded xcb-proto (1.3-1 -> 1.4-1)
    [2009-03-14 09:47] upgraded libxcb (1.1.93-1 -> 1.2-1)
    [2009-03-14 09:47] upgraded libx11 (1.1.99.2-2 -> 1.2-1)
    [2009-03-14 09:47] upgraded libxfont (1.3.4-1 -> 1.4.0-1)
    [2009-03-14 09:47] upgraded lm_sensors (3.0.3-2 -> 3.1.0-1)
    [2009-03-14 09:47] upgraded man-pages (3.18-1 -> 3.19-1)
    [2009-03-14 09:47] upgraded mcpp (2.7.2-1 -> 2.7.2-2)
    [2009-03-14 09:47] upgraded mysql (5.0.77-1 -> 5.0.77-2)
    [2009-03-14 09:47] upgraded notification-daemon (0.4.0-1 -> 0.4.0-2)
    [2009-03-14 09:47] upgraded ntfs-3g (2009.1.1-1 -> 2009.2.1-1)
    [2009-03-14 09:47] warning: /etc/php/php.ini installed as /etc/php/php.ini.pacnew
    [2009-03-14 09:47] upgraded php (5.2.8-1 -> 5.2.9-2)
    [2009-03-14 09:47] upgraded pm-utils (1.2.4-1 -> 1.2.4-3)
    [2009-03-14 09:47] upgraded postgresql-libs (8.3.5-1 -> 8.3.6-1)
    [2009-03-14 09:47] upgraded pygtk (2.14.0-1 -> 2.14.1-1)
    [2009-03-14 09:47] upgraded pygtksourceview2 (2.4.0-1 -> 2.4.0-2)
    [2009-03-14 09:47] upgraded run-parts (2.30-1 -> 2.31-1)
    [2009-03-14 09:47] upgraded tdb (3.2.7-1 -> 3.3.1-1)
    [2009-03-14 09:47] upgraded smbclient (3.2.7-1 -> 3.3.1-1)
    [2009-03-14 09:47] upgraded syslog-ng (2.1.3-2 -> 3.0.1-4)
    [2009-03-14 09:47] upgraded system-config-printer (1.1.3-1 -> 1.1.5-1)
    [2009-03-14 09:47] upgraded tar (1.21-1 -> 1.22-1)
    [2009-03-14 09:47] upgraded wxgtk (2.8.9-1 -> 2.8.9.2-1)
    [2009-03-14 09:47] upgraded xbindkeys (1.8.2-2 -> 1.8.3-1)
    [2009-03-14 09:47] ==> to use yaourt as user,add these entries to /etc/sudoers:
    [2009-03-14 09:47] user ALL=NOPASSWD: /usr/bin/pacman
    [2009-03-14 09:47] user ALL=NOPASSWD: /usr/bin/pacdiffviewer
    [2009-03-14 09:47] (Please, use sudo very carefully)
    [2009-03-14 09:47] ==> for a full colorized output, install pacman-color and set PacmanBin in /etc/yaourtrc
    [2009-03-14 09:47] upgraded yaourt (0.9.2.4-1 -> 0.9.2.5-1)
    Last edited by cywhale (2009-03-15 13:37:23)

    Sorry, only looked at acpid.log which does not contain very much, here's pm-suspend.log:
    sudo cat /var/log/pm-suspend.log
    Passwort:
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Sun Mar 15 13:36:04 CET 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ummon 2.6.28-ARCH #1 SMP PREEMPT Sun Mar 8 10:18:28 UTC 2009 i686 Intel(R) Pentium(R) M processor 1000MHz GenuineIntel GNU/Linux
    Module Size Used by
    nls_cp437 7424 1
    vfat 12800 1
    fat 50592 1 vfat
    michael_mic 4224 4
    arc4 3712 4
    ecb 4608 4
    ieee80211_crypt_tkip 10752 2
    fuse 53020 2
    i915 58372 2
    drm 83880 3 i915
    cpufreq_ondemand 8972 1
    snd_seq_oss 31872 0
    snd_seq_midi_event 8192 1 snd_seq_oss
    snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8204 2 snd_seq_oss,snd_seq
    joydev 11712 0
    pcmcia 35532 0
    snd_pcm_oss 40192 0
    snd_mixer_oss 16512 1 snd_pcm_oss
    usbhid 36640 0
    hid 40704 1 usbhid
    e100 35084 0
    snd_intel8x0m 15500 0
    snd_intel8x0 30876 1
    ipw2200 142664 0
    snd_ac97_codec 102308 2 snd_intel8x0m,snd_intel8x0
    ac97_bus 3584 1 snd_ac97_codec
    yenta_socket 25996 1
    rsrc_nonstatic 13056 1 yenta_socket
    ohci1394 31280 0
    snd_pcm 70020 4 snd_pcm_oss,snd_intel8x0m,snd_intel8x0,snd_ac97_codec
    ieee80211 29512 1 ipw2200
    ieee80211_crypt 6532 2 ieee80211_crypt_tkip,ieee80211
    eepro100 29968 0
    mii 6528 2 e100,eepro100
    serio_raw 7172 0
    snd_timer 21384 2 snd_seq,snd_pcm
    pcmcia_core 34452 3 pcmcia,yenta_socket,rsrc_nonstatic
    ieee1394 79940 1 ohci1394
    snd 50852 12 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
    psmouse 55828 0
    soundcore 8160 1 snd
    snd_page_alloc 10120 3 snd_intel8x0m,snd_intel8x0,snd_pcm
    i2c_i801 10896 0
    i2c_core 22804 1 i2c_i801
    sg 26804 0
    iTCO_wdt 12836 0
    iTCO_vendor_support 4996 1 iTCO_wdt
    uhci_hcd 24592 0
    ehci_hcd 36876 0
    video 18704 0
    output 4608 1 video
    usbcore 136848 4 usbhid,uhci_hcd,ehci_hcd
    intel_agp 27836 1
    shpchp 34068 0
    pci_hotplug 28064 1 shpchp
    agpgart 31572 3 drm,intel_agp
    rfkill 11596 0
    led_class 5508 0
    wmi 7848 0
    thermal 17180 0
    fan 6276 0
    button 7824 0
    evdev 11296 13
    battery 12036 0
    ac 6020 0
    acerhk 33208 0
    acpi_cpufreq 13452 0
    freq_table 5632 2 cpufreq_ondemand,acpi_cpufreq
    processor 41388 3 thermal,acpi_cpufreq
    rtc_cmos 12332 0
    rtc_core 17564 1 rtc_cmos
    rtc_lib 4480 1 rtc_core
    ext4 218268 2
    mbcache 8708 1 ext4
    jbd2 55192 1 ext4
    crc16 3712 1 ext4
    sd_mod 26904 5
    ata_generic 6788 0
    ata_piix 23300 4
    pata_acpi 6016 0
    libata 157856 3 ata_generic,ata_piix,pata_acpi
    scsi_mod 102164 3 sg,sd_mod,libata
    total used free shared buffers cached
    Mem: 1545756 333400 1212356 0 31800 117104
    -/+ buffers/cache: 184496 1361260
    Swap: 3935916 0 3935916
    success.
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: /bin/stty: standard input: Invalid argument
    success.
    /etc/pm/sleep.d/11suspend suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90chvt suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
    /etc/pm/sleep.d/99laptop-mode suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
    success.
    Sun Mar 15 13:36:06 CET 2009: performing suspend
    EDIT: After further searching this forums I found a thread where similar issues were solved (workaround) by removing the 'autodetect' hook from mkinitcpio.conf - tried this - worked fine, tabletPC is resuming back without problems now.
    pm-suspend.log without 'autodetect' hook in mkinitcpio.conf:
    sudo cat /var/log/pm-suspend.log
    Passwort:
    Initial commandline parameters: --quirk-dpms-suspend
    --quirk-dpms-on
    --quirk-vbestate-restore
    --quirk-vbemode-restore
    --quirk-vga-mode3
    --quirk-vbe-post
    Sun Mar 15 14:28:17 CET 2009: Running hooks for suspend.
    /usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux ummon 2.6.28-ARCH #1 SMP PREEMPT Sun Mar 8 10:18:28 UTC 2009 i686 Intel(R) Pentium(R) M processor 1000MHz GenuineIntel GNU/Linux
    Module Size Used by
    nls_cp437 7424 1
    vfat 12800 1
    fat 50592 1 vfat
    michael_mic 4224 4
    arc4 3712 4
    ecb 4608 4
    ieee80211_crypt_tkip 10752 2
    fuse 53020 2
    i915 58372 2
    drm 83880 3 i915
    cpufreq_ondemand 8972 1
    joydev 11712 0
    snd_seq_oss 31872 0
    snd_seq_midi_event 8192 1 snd_seq_oss
    snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8204 2 snd_seq_oss,snd_seq
    pcmcia 35532 0
    snd_pcm_oss 40192 0
    snd_mixer_oss 16512 1 snd_pcm_oss
    usbhid 36640 0
    hid 40704 1 usbhid
    e100 35084 0
    snd_intel8x0 30876 1
    snd_intel8x0m 15500 0
    serio_raw 7172 0
    snd_ac97_codec 102308 2 snd_intel8x0,snd_intel8x0m
    ac97_bus 3584 1 snd_ac97_codec
    ipw2200 142664 0
    yenta_socket 25996 1
    rsrc_nonstatic 13056 1 yenta_socket
    ohci1394 31280 0
    snd_pcm 70020 4 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec
    eepro100 29968 0
    mii 6528 2 e100,eepro100
    ieee80211 29512 1 ipw2200
    ieee80211_crypt 6532 2 ieee80211_crypt_tkip,ieee80211
    snd_timer 21384 2 snd_seq,snd_pcm
    pcmcia_core 34452 3 pcmcia,yenta_socket,rsrc_nonstatic
    ieee1394 79940 1 ohci1394
    snd 50852 12 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
    soundcore 8160 1 snd
    snd_page_alloc 10120 3 snd_intel8x0,snd_intel8x0m,snd_pcm
    psmouse 55828 0
    i2c_i801 10896 0
    i2c_core 22804 1 i2c_i801
    sg 26804 0
    iTCO_wdt 12836 0
    iTCO_vendor_support 4996 1 iTCO_wdt
    uhci_hcd 24592 0
    ehci_hcd 36876 0
    video 18704 0
    output 4608 1 video
    usbcore 136848 4 usbhid,uhci_hcd,ehci_hcd
    intel_agp 27836 1
    shpchp 34068 0
    pci_hotplug 28064 1 shpchp
    agpgart 31572 3 drm,intel_agp
    rfkill 11596 0
    led_class 5508 0
    wmi 7848 0
    thermal 17180 0
    fan 6276 0
    button 7824 0
    evdev 11296 13
    battery 12036 0
    ac 6020 0
    acerhk 33208 0
    acpi_cpufreq 13452 0
    freq_table 5632 2 cpufreq_ondemand,acpi_cpufreq
    processor 41388 3 thermal,acpi_cpufreq
    rtc_cmos 12332 0
    rtc_core 17564 1 rtc_cmos
    rtc_lib 4480 1 rtc_core
    ext4 218268 2
    mbcache 8708 1 ext4
    jbd2 55192 1 ext4
    crc16 3712 1 ext4
    sd_mod 26904 5
    ata_generic 6788 0
    ata_piix 23300 4
    pata_acpi 6016 0
    libata 157856 3 ata_generic,ata_piix,pata_acpi
    scsi_mod 102164 3 sg,sd_mod,libata
    total used free shared buffers cached
    Mem: 1545756 314476 1231280 0 31304 110284
    -/+ buffers/cache: 172888 1372868
    Swap: 3935916 0 3935916
    success.
    /usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: /bin/stty: standard input: Invalid argument
    success.
    /etc/pm/sleep.d/11suspend suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90chvt suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
    /etc/pm/sleep.d/99laptop-mode suspend suspend: success.
    /usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
    success.
    Sun Mar 15 14:28:19 CET 2009: performing suspend
    Sun Mar 15 14:28:30 CET 2009: Awake.
    Sun Mar 15 14:28:30 CET 2009: Running hooks for resume
    /usr/lib/pm-utils/sleep.d/99video resume suspend: success.
    /etc/pm/sleep.d/99laptop-mode resume suspend: Laptop mode enabled, not active
    success.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
    /usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
    /usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/90chvt resume suspend: success.
    /usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
    /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
    /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
    /etc/pm/sleep.d/11suspend resume suspend: success.
    /usr/lib/pm-utils/sleep.d/11netcfg resume suspend: /bin/stty: standard input: Invalid argument
    success.
    /usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
    /usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
    /usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
    Sun Mar 15 14:28:31 CET 2009: Finished.
    Last edited by cywhale (2009-03-15 13:33:39)

  • Rendering of Arabic/Transliteration broken since upgrade to 29

    Hello,
    Mozilla Firefox 29.0.0 - 29.0.1, MacOS X 10.9.2
    Problem: Arabic fonts (Lateef, Sheherazade) as well as transliteration Arabic > Latin is broken since update to 29. They were fine before. This happens when loading pages from a database. The protocol uses 'mixed content' and there seems to have been an update in Firefox's handling of such content. However, even explicitly unblocking such content doesn't solve the problem (apparently, one has to deblock every single page or is there an option for an entire domain? Otherwise, this is a pain in the neck and completely impractical). Firefox 'chooses' to select encoding seemingly at random: View > Character Encoding > Unicode/Western. Unfortunately, this version of Firefox scratched the possibility to select default encoding.
    Now, the pages loaded do not declare their encoding. However, this was not a problem because FF would use Unicode (UTF-8) by default. Setting instead "Default for Current Locale" is obviously useless. That's where the problem seems to be. Why was the plain default option changed so that we have no longer access to it? As you will understand in mixed environments (using a variety of languages and keyboard layouts), 'default locale' is pointless. Any suggestions are most welcome.

    FredMcD. Thank you for the hints. I'm sure they help in most cases. It didn't solve my problem though. Normal websites work actually quite well, it's just the internal ones that have this problem.
    cor-el. Thank you also for your hints. I checked and I'm pretty sure that it's not a corrupt font. The problem, as I've mentioned, is that the server does not declare its encoding. This wasn't a problem as long as UFT-8 could be declared as fall-back. Now, as I've written, there is only the option 'Default for Current Locale' which doesn't help. I suppose either Mozilla puts back the older option or we have to do something here. Would love to post link but I'm not sure there is general access to our servers (probably not) but I'll ask.
    I attached an exampled of how the 'garbled' text looks. It's more than garbled there just no font 'resolution'.
    Thank you both again for taking the time to give advice. I think your hints will come in useful in general use of Firefox.

  • HT1338 since updating to Mountain Lion my HP 8180 all in one printer will not work and shows it as idle and pipe broken it connects via WIFI

    since updating to Mountain Lion my HP 8180 all in one printer refuses to work it show as "pipe broken" and printer as idle can anyone help please

    do you mean the printer? ive already tried that without success any further help apprecaited

  • Aperture RAW profiles broken since 10.7.4 update

    Since updating to OSX 10.7.4 last week it seems to have broken some of Apertures RAW profiles for some cameras.
    My Nikon D700/D300 files are all fine but my RAW files for my Lumix GX1 are green!
    I also get the message "This Photo was adjusted using an earlier version of Apple's RAW processing" and then it offers me the option to Reprocess.
    This fixes the green issue but doing this file by file when you've imported over 100+ is a real pain. The RAW for the GX1 was supported and was working fine before updating to OSX 10.7.4
    Any ideas whats going on?

    See this support article: list: http://support.apple.com/kb/HT4757
    The support for the gx1 seems to have been moved directly into MacOS 10.7.4, and for Aperture this is a change of raw support.
    Regards
    Léonie
    P.S: Perhaps this will help:No guarantees, I never tried it:
    Re: This photo was adjusted using an earlier version of Apple's RAW processing

  • Asset Generator broken since recent update to Photoshop CC

    With this latest update to Photoshop CC, the asset generator no longer seems to support having masks on a folder - asset will NOT generate if this is the case. Seems the only work-around is to clip everything down to a shape layer, which is highly awkward. Is this a bug? Can it please be fixed? This used to work just fine and has only been broken since the most recent update.

    My team is having the same issue.  I'd love to hear about a fix to this.

  • Java broken in FF6 / Safari since updating to OSX 10.6.8 from 10.6.7

    Hi All,
    I have been having huge issues with what appear to be java source components of web pages since updating my OSX back in July.
    The problems are as follows:
    Web based booking engines (for flights at Airasia, Bangkok Air) load up without any flight options (or will not load up)
    My internet banking "timeout" occurs immediately upon succesfful login to my user area
    I have tried the following approaches to trouble shoot
    - Alternative browsers (FF / Safari) - the problem is constant across both
    - Cache and history have been cleared for both browsers - still no success
    - Both browsers are set to accept 3rd party cookies, and javascript has been ennabled on both
    - Flash player checked to ensure it is the most current.
    I have also checked the functionality of the web pages and their content on Windows - it's definitely something that is limited to mac , although I have been unnable to check against another mac at present.
    This is about the limit of my troubleshooting abilities, as I am only new to mac this year, and am not a particularly savvy techno-logiclal person.
    HELP! Would really like to be able to
    -find the problem
    -fix it
    - prevent recurrence
    Cheeers,
    Katie

    Hi Katie,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Hyperlinks broken after updating to 9.3.4

    Since updating Adobe Standard to 9.3.4, all our hyperlinks are broken.  It appears that if we put the linked document (Excel or Word) in the same path as the PDF (ie; both PDF and document are on the desktop) then the links work.  However, the way our files are set up, all the PDF's are in one directory and all the linked documents are in a different location.  They worked fine prior to the update; now none of them work.
    I have tested this on two other computers.  Works fine prior to running the update.  Once the update is installed, none of the links work.

    I am still having problems trying to open a wmv file. I put the wmv in the same folder as the pdf yet it still will not open for me.
    I have a pdf in a root that links to a pdf \folder\folder\1.pdf then that links to a 2.pdf in the same folder. Then 2.pdf has a link to open a wmv that is in the same folder.
    Help on this will be greatly appreciated.

  • Youtube broken after update!

    I've updated to the latest OS (5.1) on my Apple TV 3.
    YouTube, WSJ, MLB all have been broken since then.
    I cannot login, search or watch any video on the Youtube app what-so-ever.
    Stragely, Vimeo is still working.
    I also noticed that when I go to Settings->General->About, activation status is 'failed'.
    Has anyone gotten a solution, or solutions, to these problem?

    My AppleTV (3.0.1) can successfully login to youtube but did not show my favorites.
    As a workaround, I went to youtube, logged in to my account and shared my favorites.
    (http://www.youtube.com/account#sharing/activity)
    P.S. Might be that YouTube changed it's APIs... Perhaps a new AppleTV release (3.0.2?)
    will use the documented YouTube Data API.

  • Power View seems broken by Updates

    We are using Power View in Excel and it seems broken since several days due maybe to Windows updates. We did test with really simple tab (2 columns, 3 lines of numbers).
    We found that machines without last updates continue to work but not up to date.
    Somebody can confirm ?
    Not sure there is a link but file versions in C:\Program Files (x86)\Microsoft Office\Office15\ADDINS\Power View Excel Add-in of non working machine are : 11.0.2809.90 and 11.0.2809.92
    on working machines : 11.0.2809.81
    Thanks for your help

    Hi there. I had the same sort of problem.
    Found a hotfix that solves it. Maybe you could try
    http://support.microsoft.com/kb/2837666
    Let me know
    Scott

  • Can't burn since update to 7.0.2

    I've seen many posts about this with various "fixes" and many more still experiencing the problem. I've got this installed on two PCs - a Dell laptop and a Dell desktop. Both are broken since the update. This has got to be a problem with the iTunes software. From the posts, it appears Apple has yet to publicly accept responsibility. I guess you can try some of the "fixes" listed, but I'll just wait (angrily) for 7.0.3. I did try slowing my burn speed, the "Include CD Text" was already off, and I've tried different brands of blanks (three supposed solutions). But both PCs were working with the same blanks and at maximum speeds before.
    I hate it when updates break something.
    Dell laptop and desktop   Windows XP Pro  

    Hi Roy,
    The other user that responded has a different drive than I. I did not see any updates on the Dell site for mine. They had it for the 324S but not the 324F. Here is the diag output:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Latitude D800
    iTunes 7.0.2.16
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.1
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (5.3.5.10),
    UpperFilters: pwd_2k (5.3.5.10), cdralw2k (5.3.5.10), GEARAspiWDM (2.0.6.1),
    Video Driver: NVIDIA GeForce4 4200 Go (Dell Mobile)\GeForce4 4200 Go
    IDE\DiskHTS548040M9AT00_______________________MG2OA53A, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGCDRW/DVD_SN-324F________________U203___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is an administrator.
    E: SAMSUNG CDRW/DVD SN-324F, Rev U203
    Audio CD in drive.
    Found 17 songs on CD, playing time 70:08 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 03:30:49
    Track 3, start time 06:22:46
    Track 4, start time 10:15:48
    Track 5, start time 14:39:43
    Track 6, start time 18:02:50
    Track 7, start time 22:48:67
    Track 8, start time 27:00:57
    Track 9, start time 30:51:53
    Track 10, start time 35:06:48
    Track 11, start time 39:21:13
    Track 12, start time 43:59:45
    Track 13, start time 48:44:40
    Track 14, start time 54:50:62
    Track 15, start time 59:13:71
    Track 16, start time 62:50:68
    Track 17, start time 66:34:02
    Audio CD reading succeeded (check for old firmware).
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 10 16 20 24.
    The drive CDRW speeds are: 4.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SAMSUNG CDRW/DVD SN-324F on CDR media at speed 8X.

Maybe you are looking for