Location Manager Strange Behavior

Hi,
debbung my application i have discovered that location manager have sometimes a strange behavior. Sometimes when i start to get location only the first "Bad" point with v. accur. = -1 is returned then no other point i returned. If then i open Apple Map i see that also map doesn't get point. So i must shutdown and restart Location service and all work perfectly. I have also strange issue when i change distanceFilter in the already created location manager Instance. it's doesn't work no point are peeked. If i restart the app sometimes work.
Finally i have discovered on the iphone syslog that it try to connect to an apple site "http://iphone-wu.apple.com" to download a file" lto2.dat" someone know what is this file?
Thanks you

Hello, I see the same in my Iphone.
I search in google and found this:
"Global Locate predicts the satellite orbits for 2, 4, 7, or 10
days in advance, and you download that. AKA "Long Term Orbit" or LTO."
It's a module used in opensource gps

Similar Messages

NetInfo Manager - strange behaviors - Local DNS

So I'm trying to set up local dns to a remote host that is using name based hosting.
I went into netinfo manager - went into machines - created an entry for the ip_address, name, and serves properties. I repeated this process 3 times on this machine. 2 of the sites work just fine... the third does not. Double checked the settings on server and client. Looks ok.
Flushed lookupd, reset safari, etc. Still no luck. 3rd one doesn't work.
Tried on a linux box in the same network - added to hosts file "[ip address] [domain] [domain2] [domain3] ... works fine... all three visible.
Hopped on the Xserve (which has not accessed any previously) - would not work for 3rd site.
Any idea why this would act up?

lookupd(8)
manpage it discusses how to do what your looking for.
Hey Andy,
Unfortunately, man lookupd was like greek, for the most part, since I don't do that much Unix. And the warnings about reordering the lookup order was ominous, since I'm not an expert.
But I was able to accomplish my server lookup before DNS... by adding a line in the hosts file in etc, using sudo in Tiger (sudo not needed in Panther). I put the IP and server name under broadcasthost and before ::1 localhost.
It works.
Mac OS X (10.4.4)

I get a strange behavior of the tab bar and of the location bar in Firefox 29.0 for Mac.

I have just installed Firefox 29.0 for Mac.
I get a strange behavior of the tab bar and of the location bar with this new version.
Instead of the location bar, I get two rows of symbols. And it's impossible to write anything in the location bar.
(I'd like to add a screenshot, but I cannot find a way to do it.)

Thank you for your tip.
I found the culprit: it was an extension called RSS Icon 1.0.6.
I removed it and now Firefox 29.0 is working perfectly.
Now I'll have to find a replacement for that extension.
Thank you once again. Your tip was essential.

Strange behavior of Planning manager

Hi All,
I am working on forecast interface, facing a strange behavior of Planning manager.
Our application planning manager is in active status, we set MRP:Planning Manager Batch Size profile value as 2000 and MRP:Planning Manager Max Workers value as 10 in our application(11.5.10.2).
we have loaded 2Lac's of records in MRP_FORECAST_INTERFACE table with process_status=2. Almost running for 12hours, even one record status(process_status) also not changed. the code which we are using to load in interface table is using in production since 3 years.. Can any one help me to figerout the issue ..
Thanks

please search this forum. it has been answered many times
over.
i dont have the thread that answers it right way - but if you
do a search im sure youll find it (i did jsut recently)

Strange behavior: action method not called when button submitted

Hello,
My JSF app is diplaying a strange behavior: when the submit button is pressed the action method of my managed bean is not called.
Here is my managed bean:
package arcoiris;
import java.util.ArrayList;
import java.util.List;
import javax.faces.model.SelectItem;
public class SearchManagedBean {
    //Collected from search form
    private String keyword;
    private String country;
    private int[] postcode;
    private boolean commentExists;
    private int rating;
    private boolean websiteExists;
    //Used to populate form
    private List<SelectItem> availableCountries;
    private List<SelectItem> availablePostcodes;
    private List<SelectItem> availableRatings;
    //Retrieved from ejb tier
    private List<EstablishmentLocal> retrievedEstablishments;
    //Service locator
    private arcoiris.ServiceLocator serviceLocator;
    //Constructor
    public SearchManagedBean() {
        System.out.println("within constructor SearchManagedBean");
        System.out.println("rating "+this.rating);
    //Getters and setters
    public String getKeyword() {
        return keyword;
    public void setKeyword(String keyword) {
        this.keyword = keyword;
    public String getCountry() {
        return country;
    public void setCountry(String country) {
        this.country = country;
    public boolean isCommentExists() {
        return commentExists;
    public void setCommentExists(boolean commentExists) {
        this.commentExists = commentExists;
    public int getRating() {
        return rating;
    public void setRating(int rating) {
        this.rating = rating;
    public boolean isWebsiteExists() {
        return websiteExists;
    public void setWebsiteExists(boolean websiteExists) {
        this.websiteExists = websiteExists;
    public List<SelectItem> getAvailableCountries() {
        List<SelectItem> countries = new ArrayList<SelectItem>();
        SelectItem si_1 = new SelectItem();
        SelectItem si_2 = new SelectItem();
        SelectItem si_3 = new SelectItem();
        si_1.setValue("2");
        si_1.setLabel("ecuador");
        si_2.setValue("1");
        si_2.setLabel("colombia");
        si_3.setValue("3");
        si_3.setLabel("peru");
        countries.add(si_1);
        countries.add(si_2);
        countries.add(si_3);
        return countries;
    public void setAvailableCountries(List<SelectItem> countries) {
        this.availableCountries = availableCountries;
    public List<SelectItem> getAvailablePostcodes() {
        List<SelectItem> postcodes = new ArrayList<SelectItem>();
        SelectItem si_1 = new SelectItem();
        SelectItem si_2 = new SelectItem();
        SelectItem si_3 = new SelectItem();
        si_1.setValue(75001);
        si_1.setLabel("75001");
        si_2.setValue(75002);
        si_2.setLabel("75002");
        si_3.setValue(75003);
        si_3.setLabel("75003");
        postcodes.add(si_1);
        postcodes.add(si_2);
        postcodes.add(si_3);
        return postcodes;
    public void setAvailablePostcodes(List<SelectItem> availablePostcodes) {
        this.availablePostcodes = availablePostcodes;
    public List<SelectItem> getAvailableRatings() {
        List<SelectItem> ratings = new ArrayList<SelectItem>();
        SelectItem si_1 = new SelectItem();
        SelectItem si_2 = new SelectItem();
        SelectItem si_3 = new SelectItem();
        si_1.setValue(1);
        si_1.setLabel("1");
        si_2.setValue(2);
        si_2.setLabel("2");
        si_3.setValue(3);
        si_3.setLabel("3");
        ratings.add(si_1);
        ratings.add(si_2);
        ratings.add(si_3);
        return ratings;
    public void setAvailableRatings(List<SelectItem> availableRatings) {
        this.availableRatings = availableRatings;
    public int[] getPostcode() {
        return postcode;
    public void setPostcode(int[] postcode) {
        this.postcode = postcode;
    public List<EstablishmentLocal> getRetrievedEstablishments() {
        return retrievedEstablishments;
    public void setRetrievedEstablishments(List<EstablishmentLocal> retrievedEstablishments) {
        this.retrievedEstablishments = retrievedEstablishments;
    //Business methods
    public String performSearch(){
        System.out.println("performSearchManagedBean begin");
        SearchRequestDTO searchRequestDto = new SearchRequestDTO(this.keyword,this.country,this.postcode,this.commentExists,this.rating, this.websiteExists);
        SearchSessionLocal searchSession = lookupSearchSessionBean();
        List<EstablishmentLocal> retrievedEstablishments = searchSession.performSearch(searchRequestDto);
        this.setRetrievedEstablishments(retrievedEstablishments);
        System.out.println("performSearchManagedBean end");
        return "success";
    private arcoiris.ServiceLocator getServiceLocator() {
        if (serviceLocator == null) {
            serviceLocator = new arcoiris.ServiceLocator();
        return serviceLocator;
    private arcoiris.SearchSessionLocal lookupSearchSessionBean() {
        try {
            return ((arcoiris.SearchSessionLocalHome) getServiceLocator().getLocalHome("java:comp/env/ejb/SearchSessionBean")).create();
        } catch(javax.naming.NamingException ne) {
            java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,ne);
            throw new RuntimeException(ne);
        } catch(javax.ejb.CreateException ce) {
            java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,ce);
            throw new RuntimeException(ce);
}Here is my jsp page:
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
   "http://www.w3.org/TR/html4/loose.dtd">
         <html>
             <head>
                 <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
                 <META HTTP-EQUIV="pragma" CONTENT="no-cache">
                 <title>JSP Page</title>
             </head>
             <body>
                 <f:view>
                     <h:panelGroup id="body">
                         <h:form id="searchForm">
                             <h:panelGrid columns="2">
                                 <h:outputText id="keywordLabel" value="enter keyword"/>
                                 <h:inputText id="keywordField" value="#{SearchManagedBean.keyword}"/>
                                 <h:outputText id="countryLabel" value="choose country"/>
                                 <h:selectOneListbox id="countryField" value="#{SearchManagedBean.country}">
                                     <f:selectItems id="availableCountries" value="#{SearchManagedBean.availableCountries}"/>
                                 </h:selectOneListbox>
                                 <h:outputText id="postcodeLabel" value="choose postcode(s)"/>
                                 <h:selectManyListbox id="postcodeField" value="#{SearchManagedBean.postcode}">
                                     <f:selectItems id="availablePostcodes" value="#{SearchManagedBean.availablePostcodes}"/>
                                 </h:selectManyListbox>
                                 <h:outputText id="commentExistsLabel" value="with comment"/>
                                 <h:selectBooleanCheckbox id="commentExistsField" value="#{SearchManagedBean.commentExists}" />
                                 <h:outputText id="ratingLabel" value="rating"/>
                                 <h:selectOneListbox id="ratingField" value="#{SearchManagedBean.rating}">
                                     <f:selectItems id="availableRatings" value="#{SearchManagedBean.availableRatings}"/>
                                 </h:selectOneListbox>
                                 <h:outputText id="websiteExistsLabel" value="with website"/>
                                 <h:selectBooleanCheckbox id="websiteExistsField" value="#{SearchManagedBean.websiteExists}" />
                                 <h:commandButton value="search" action="#{SearchManagedBean.performSearch}"/>
                             </h:panelGrid>
                         </h:form>
                     </h:panelGroup>
                 </f:view>
             </body>
         </html>
     here is my faces config file:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config>
    <managed-bean>
        <managed-bean-name>SearchManagedBean</managed-bean-name>
        <managed-bean-class>arcoiris.SearchManagedBean</managed-bean-class>
        <managed-bean-scope>request</managed-bean-scope>
    </managed-bean>
    <navigation-rule>
       <description></description>
        <from-view-id>/welcomeJSF.jsp</from-view-id>
        <navigation-case>
        <from-outcome>success</from-outcome>
        <to-view-id>index.jsp</to-view-id>
        </navigation-case>
    </navigation-rule>
</faces-config>The problem occurs when the field ratingField is left blank (which amounts to it being set at 0 since it is an int).
Can anyone help please?
Thanks in advance,
Julien.

Hello,
Thanks for the suggestion. I added the tag and it now says:
java.lang.IllegalArgumentException
I got that from the log:
2006-08-17 15:29:16,859 DEBUG [com.sun.faces.el.ValueBindingImpl] setValue Evaluation threw exception:
java.lang.IllegalArgumentException
     at sun.reflect.GeneratedMethodAccessor118.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.PropertyResolverImpl.setValue(PropertyResolverImpl.java:178)
     at com.sun.faces.el.impl.ArraySuffix.setValue(ArraySuffix.java:192)
     at com.sun.faces.el.impl.ComplexValue.setValue(ComplexValue.java:171)
     at com.sun.faces.el.ValueBindingImpl.setValue(ValueBindingImpl.java:234)
     at javax.faces.component.UIInput.updateModel(UIInput.java:544)
     at javax.faces.component.UIInput.processUpdates(UIInput.java:442)
     at javax.faces.component.UIComponentBase.processUpdates(UIComponentBase.java:935)
     at javax.faces.component.UIForm.processUpdates(UIForm.java:196)
     at javax.faces.component.UIComponentBase.processUpdates(UIComponentBase.java:935)
     at javax.faces.component.UIComponentBase.processUpdates(UIComponentBase.java:935)
     at javax.faces.component.UIViewRoot.processUpdates(UIViewRoot.java:363)
     at com.sun.faces.lifecycle.UpdateModelValuesPhase.execute(UpdateModelValuesPhase.java:81)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
     at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:159)
     at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:744)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
     at java.lang.Thread.run(Thread.java:595)
2006-08-17 15:29:16,875 DEBUG [com.sun.faces.context.FacesContextImpl] Adding Message[sourceId=searchForm:ratingField,summary=java.lang.IllegalArgumentException)Do you see where the problem comes from??
Julien.

Strange Behavior with gMSA in Server 2012 R2

Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
Nick

VIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
   ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick

Strange behavior from a PB G4 (Part 2)

On to my next issue. Often when I'm typing the insertion point will jump to someplace other than where it should be or just disappear all together. I'm not doing anything to cause it to do this. I've been being really carefull to not to do anything wrong. I'ts often enough to be a real nuisance. It happened 7 times during my first post (Strange behavior from a PB G4) and 3 times during this one. Please help. Thanks.

Igor_G5 wrote:
... I thought about putting in a larger drive but when I looked up instructions for it i was surprized at how difficult it was.
Did you use the iFixit website? It has excellent pictures and instructions that are easy to follow.
Replacing any hard disk drive will be challenging for a paraplegic, but with someone's help it can be done fairly inexpensively. There are many tiny fasteners that require tiny tools. Use an egg carton to store them, separated by their location in the PowerBook.
Earlier PowerBooks are easier to work on than later ones.
I still use a PowerBook G4 on occasion, mostly for importing video for editing in iMovie. I upgraded its original 60 GB HD to a much larger one. If you were to do this you would need to locate the PowerBook's original System Install DVD to install and subsequently update OS X and all its original programs.
If you ensure at least a few gigabytes free space, I think most of your problems will be fixed. When free disk space gets down to a few hundred megabytes or less, performance will suffer dramatically. You don't want it to ever get anywhere near that low. Strange things start to happen.
Keep the number of icons on the Desktop to a minimum also. That makes a difference, for reasons that I do not fully understand.

Strange Behavior connecting to Oracle

Hi to All,
On Server Windows 2003 I have installed Oracle 10g R2. On this Server run Toad for Oracle.
If I run Oracle console, all work fine; running Toad the ORA-12154 error is displayed.
I have tried to connect to DB with Toad from a client and all works.
Have someone an idea on this strange behavior ?
Thank You and Best Regards
Gaetano

This may be a problem?NO!
12154, 00000, "TNS:could not resolve the connect identifier specified"
// *Cause: A connection to a database or other service was requested using
// a connect identifier, and the connect identifier specified could not
// be resolved into a connect descriptor using one of the naming methods
// configured. For example, if the type of connect identifier used was a
// net service name then the net service name could not be found in a
// naming method repository, or the repository could not be
// located or reached.
// *Action:
//   - If you are using local naming (TNSNAMES.ORA file):
//      - Make sure that "TNSNAMES" is listed as one of the values of the
//        NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA)
//      - Verify that a TNSNAMES.ORA file exists and is in the proper
//        directory and is accessible.
//      - Check that the net service name used as the connect identifier
//        exists in the TNSNAMES.ORA file.
//      - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
//        file. Look for unmatched parentheses or stray characters. Errors
//        in a TNSNAMES.ORA file may make it unusable.
//   - If you are using directory naming:
//      - Verify that "LDAP" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Verify that the LDAP directory server is up and that it is
//        accessible.
//      - Verify that the net service name or database name used as the
//        connect identifier is configured in the directory.
//      - Verify that the default context being used is correct by
//        specifying a fully qualified net service name or a full LDAP DN
//        as the connect identifier
//   - If you are using easy connect naming:
//      - Verify that "EZCONNECT" is listed as one of the values of the
//        NAMES.DIRETORY_PATH parameter in the Oracle Net profile
//        (SQLNET.ORA).
//      - Make sure the host, port and service name specified
//        are correct.
//      - Try enclosing the connect identifier in quote marks.
//   See the Oracle Net Services Administrators Guide or the Oracle
//   operating system specific guide for more information on naming.This error is clear.
SQL*Net is being asked to resolved TNS_ALIAS & it reports that it can not find the requested name.
EITHER
1) the requested name is not correct
or
2) SQL*Net is looking in the wrong tnsnames.ora file & still not finding the requested name.
Good Luck solving your mystery

Strange behavior of HtmlPanelGrid.getChildren().clear();

I have some problem, described in previous messages.
Investigating it, I found some strange behavior, which I cannot understand.
I builded a small application to isolate this strangeness.
There are two pages, first and second. There are hyperlinks from first page to second. Secon page serves as an indicator, that navigation was successfull. It is not so all the time.
There is a bean, which constructs a hyperlink at runtime and which contains my problem, as I think.
The config file is (header and footer skipped):
<navigation-rule>
<from-view-id>/welcomeJSF.jsp</from-view-id>
<navigation-case>
<from-outcome>select</from-outcome>
<to-view-id>/secondPage.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<managed-bean>
<managed-bean-name>bean</managed-bean-name>
<managed-bean-class>Buggy.Bean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
One can see, that navigation is always controlled with the one constant string literal -- select. The bean is called just "bean" and it exists during a session.
First page is (header and footer skipped):
<f:view>
<h:form>
<h:commandLink id="link1" action="select" value="link1 (hardcoded)"/>
<h:panelGrid id="panel" binding="#{bean.panel}" columns="20" border="1" cellspacing="0">
<h:commandLink id="link2" action="select" value="link2 (hardcoded)"/>
</h:panelGrid>
</h:form>
</f:view>
One can see, that there are two hardcoded hyperlinks, one is inside the panelGrid, second is outside. Also it is seen, that the panel is binded with bean property as a whole.
The second page is just displaying a text to be sure the navigation occured.
Now the bean (header and footer skipped):
private HtmlPanelGrid panel;
public HtmlPanelGrid getPanel() {
return panel;
public void setPanel(HtmlPanelGrid panel) {
this.panel = panel;
Application application = FacesContext.getCurrentInstance().getApplication();
MethodExpression expr = application.getExpressionFactory().createMethodExpression(FacesContext.getCurrentInstance().getELContext(), "select", String.class, new Class[0]);
HtmlCommandLink link = (HtmlCommandLink) application.createComponent(HtmlCommandLink.COMPONENT_TYPE);
link.setId("link3");
link.setValue("link3 (softcoded)");
link.setActionExpression(expr);
panel.getChildren().clear();
panel.getChildren().add(link);
One can see, that a third (softcoded) hyperlink is added to the panel dynamically, with preliminary clearing panel content.
* STRANGENESSES *
1) despite the fact, that the panel is cleared prior to adding softcoded hyperlink, I CAN see it on the page (all 3 hyperlinks are seen)
2) in the debugger I can see, that while executing code, the children list is empty; this can mean, that the order of execution of the Jave code and JSP code is reversed; despite this fact, I see the hardcoded link BEFORE the softcoded
3) the link2 (hardcoded) is not work, i.e. it is not leads the second page to be displayed
4) if I comment the line panel.getChildren().clear(); then all 3 hyperlinks start to work

But when I put links creation code in bean's constructor, it was lost.
It seems to me, that the system creates panel independently and only after that calls setter of my bean. Ergo, the data from the panel field, initialized in constructor is overwrited.
Where I should place programmatic filling of panel element?

Strange behavior of email notification: where is the log?

Hi,
The email notifications have a strange behavior in our productive system. When the system process whatever subscription only the firsts four notification are sent by email even thought all the inbox notifications are sent. I checked the mail server and only four smtp connections are sent..... In the development system it is working well, I mean all the emails are sent using the same mail server.... I marked the option Enable session debug info in the EMAIL channel but I see nothing in the los (default.trc).
Is there any log to check what it is happened? Where is the log of session debug info?
Thanks
Antonio

Thanks for you fast replay.
I would like to increase the logging of Notificator (com.sapportals.wcm.service.notificator.wcm) to DEBUG but in NW7 SP13 I do not find that logging locations.
Could you give any hit on it?
thanks
Antonio
By the way... I found the following warning:
JMX connector exception occurred while processing external JMX request [ JMX request (java) v1.0 len: 314 | src: cluster target-node: 8573000 req: invoke params-number: 4 params-bytes: 0 | :name=com.sap.portal.prt.bridge.service.mbeans.PRTMBeanRuntime,j2eeType=PRTBridge_JMX_SECTION,SAP_J2EEClusterNode=8573000,SAP_J2EECluster=""... [see details]

Strange behavior of std::string find method in SS12

Hi
I faced with strange behavior of std::string.find method while compiling with Sunstudio12.
Compiler: CC: Sun C++ 5.9 SunOS_sparc Patch 124863-14 2009/06/23
Platform: SunOS xxxxx 5.10 Generic_141414-07 sun4u sparc SUNW,Sun-Fire-V250
Sometimes find method does not work, especially when content of string is larger than several Kb and it is needed to find pattern from some non-zero position in the string
For example, I have some demonstration program which tries to parse PDF file.
It loads PDF file completely to a string and then iterately searches all ocurrences of "obj" and "endobj".
If I compile it with GCC from Solaris - it works
If I compile it with Sunstudio12 and standard STL - does not work
If I compile it with Sunstudio12 and stlport - it works.
On win32 it always works fine (by VStudio or CodeBlocks)
Is there any limitation of standard string find method in Sunstudio12 STL ?
See below the code of tool.
Compilation: CC -o teststr teststr.cpp
You can use any PDF files larger than 2kb as input to reproduce the problem.
In this case std::string failes to find "endobj" from some position in the string,
while this pattern is located there for sure.
Example of output:
CC -o teststr teststr.cpp
teststr in.pdf Processing in.pdf
Found object:1
Broken PDF, endobj is not found from position1155
#include <string>
#include <iostream>
#include <fstream>
using namespace std;
bool parsePDF (string &content, size_t &position)
    position = content.find("obj",position);
    if( position == string::npos ) {
        cout<<"End of file"<<endl;
        return false;
    position += strlen("obj");
    size_t cur_pos = position;
    position = content.find("endobj",cur_pos);
    if( position == string::npos ){
        cerr<<"Broken PDF, endobj is not found from position"<<cur_pos<<endl;;
        return false;
    position += strlen("endobj");
    return true;
int main(int argc, char ** argv)
    if( argc < 2 ){
        cout<<"Usage:"<<argv[0]<<" [pdf files]\n";
        return -3;
    else {
        for(int i = 1;i<argc;i++) {
            ifstream pdfFile;
            pdfFile.open(argv,ios::binary);
if( pdfFile.fail()){
cerr<<"Error opening file:"<<argv[i]<<endl;
continue;
pdfFile.seekg(0,ios::end);
int length = pdfFile.tellg();
pdfFile.seekg(0,ios::beg);
char *buffer = new char [length];
if( !buffer ){
cerr<<"Cannot allocate\n";
continue;
pdfFile.read(buffer,length);
pdfFile.close();
string content;
content.insert(0,buffer,length);
delete buffer;
// the lets parse the file and find all endobj in the buffer
cout<<"Processing "<<argv[i]<<endl;
size_t start = 0;
int count = 0;
while( parsePDF(content,start) ){
cout<<"Found object:"<<++count<<"\n";
return 0;

Well, there is definitely some sort of problem here, maybe in string::find, but possibly elsewhere in the library.
Please file a bug report at [http://bugs.sun.com] and we'll have a look at it.

Strange behavior of Aliases

Ever since switching to OS 10.5, I have had a strange situation with aliases and the file to which they point. After selecting an alias, and pressing Command+R, the window will display the actual source file in its actual location, as always. Then, if I use the back-left arrow in the left side of the title bar (or Command+[ ) to return to the folder containing the alias, that folder will appear to contain the original file in addition to the alias. In reality, that file is really in its original location and it only appears to be in both places. If I move the phantom file to the desktop, the real file will disappear from its real location. Has anyone else experienced this strange behavior?

red_menace wrote:
I also noticed that the contextual menu item to show the original works differently than the main menu item.
On my system, the contextual menu behaves the same way. Using the back arrow to return to the original folder shows both the file and its alias. Leaving that folder and returning removes the phantom file, as you observed.

[BO XI 3.0] - Strange behavior regarding language settings

Hello,
I found strange behavior BOE in infoview portal. We have Desktop intelligence documents published in repository and when we open report (first time) in infoview we have right format for date and numbers e.g. dd.mm.yyyy, 123.123,00.
When we close this report and open once again the format is en-US e.g. mm/dd/yyyy 123,123.00 and this is wrong. We log out and log in and open this report but no change.
If we restart services in cmc (deski services) then the first time is report ok and when we open again this report the same error.
SW:
Windows server 2003 sp2 - english (regional settings - slovenian)
BOE premium ( BO XI R 3.0 => the same problem in BO XI 3.1)
CMS database => Oracle 10gR2 (nsl lang SLOVENIAN_SLOVENIA.EE8MSWIN1250)
Language settings in infoview we check => use browser locale and slovenian
Thank you for reply!
In BOE R2 works fine...
Regards,
Gregor

Hi Gregor,
Try the following option.
Find the file i8ln.xml in the location
"<install directory of BO>\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\scripts\"
Take a backup of the file and make the follwing changes.
Find the following code in the file
activate_languages>
<state value="0"/>
<State value="0" cs_lang="Bulgarian"/>
<State value="0" orig_lang="" cible_lang="Bulgarian"/>*
<State value="0"/>
</activate_languages>
Replace it with:
<activate_languages>
<state value="0"/>
<State value="1" cs_lang="English (Australian)"/>
<State value="1" orig_lang="" cible_lang="English (Australian)"/>*
<State value="1"/>
</activate_languages>
Save the file.
Restart your Desktop Intelligence servers. It might take a bit of time to pick up the changes.
Note: If you start Deski after this change, and go to "Tools > Options", you will see a disabled language button with "English(....)" written on it.
Regards,
Anisa

Cropping LR4 occasional strange behavior experienced by others?

The LR4 cropping process has become unstable during use on several occasions. The LR4 cropping tool seems to get confused.
During the cropping process, unwanted changes to position and leveling of the cropped area happen upon exiting. The cropped image one saw immediately before exiting is not what one sees afterwards. The crop has changed on its own. During the episode, the response to the mouse is not normal. One may drag the corner only to have it spring back upon release of the button.
Exiting LR4 and reentering does not cure the behavior. One must open image in Develop module, restore crop defaults, exit, and reenter batch tool to restore normal behavior. I am not certain as to the exact order of these steps but essentially normalcy was restored during their implementation.
I have notice that this abnormal behavior seems more likely to occur during sessions when I am making use of the "Previous" button.
As far as I know, the behavior is not reproducible. It occurs during some of those late night sessions and I have not documented it well but will do so if we don’t have a cure by next time it occurs.
My configuration:
Lightroom version: 4.2 [850741]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Physical processor count: 8
Processor speed: 3.3 GHz
Built-in memory: 16364.3 MB
Real memory available to Lightroom: 16364.3 MB
Real memory used by Lightroom: 1066.6 MB (6.5%)
Virtual memory used by Lightroom: 1090.4 MB
Memory cache size: 0.0 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080

Replacing the Lr preference file may help. The preference file can go "funny" and then causes all kinds of strange behavior of Lr.
Replacing the preference file takes about 10 minutes, and you don`t need to re-install Lr.
BTW: Un-installing and re-installing Lr does not replace the preference file.
See here for instructions o how to replace the preference file: http://lightroomers.com/replacing-the-lightroom-preference-file/745/
See here where to find the preference file: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html

Can anyone Reproduce This screencast? Strange behavior from Mac

https://drive.google.com/file/d/0B5LXJD4aR7maZng4cnl6Z2UxS28/edit?usp=sharing
1. Open finder and click go
2. go to /var
3. click on var alias and go to at file
After you open the /var/at folder there is a file called at.deny
4. Click on the file called at.deny and open with other application
You can only open it with Imessage, applemail or text edit. Notice in the screen cast that it automatically sends the at.deny file to any address that I type in I message.
5. You can also click on chron.deny and you can send that file automatically in Imessage or applemail. IS THIS NORMAL.
I AM PRETTY MUCH A NOVICE, BUT THIS MAC HAS SOME STRANGE BEHAVIORS. COULD THIS BE WHAT THEY CALL A BACKDOOR????APPLE JUST SCRATCHES THEIR HEAD??????]

This is a file that is located at /var/db/caches/opendirectory/cache_mbr
Does any other mac users have this type of file

Location Manager Strange Behavior

Similar Messages

Maybe you are looking for