Lock To Plot-Problem

I want to set the cursor to the maximum value in a X-Y-Graph. This doesn't work
when the cursor is locked to the plot. So before I set the cursor to t
position I unlock it. After setting the position I lock it again and *surprise*
it jumps to another position, which is not the one I set. This isn't happening
when I do the unlock/lock manually. I can't see a difference between the two
things. Any ideas?
Regards,
Nico
Nico Schmidt IPK/IWF eMail : [email protected]
Sekr. PTZ 4, Pascalstr. 8-9 Phone : +49-30-39006342
D-10587 Berlin

You need to use the plot and index attributes on locked plots, not the X
and Y
values.
Greg McKaskle
Nico wrote:
>
> I want to set the cursor to the maximum value in a X-Y-Graph. This doesn't work
> when the cursor is locked to the plot. So before I set the cursor to t
> position I unlock it. After setting the position I lock it again and *surprise*
> it jumps to another position, which is not the one I set. This isn't happening
> when I do the unlock/lock manually. I can't see a difference between the two
> things. Any ideas?
>
> Regards,
> Nico
>
> --
> Nico Schmidt IPK/IWF eMail : [email protected]
> Sekr. PTZ 4, Pascalstr. 8-9 Phone : +49-30-39006342
> D-10587 Berlin

Similar Messages

  • Mail 6.1 locks up, other problem

    After updating to 10.8.2, my Mail application locks up after clicking on the reply arrow within an existing email in a thread.  It happened twice, I used Force Quit and reopened, then repaired permissions in Disk Utility, tried again, it locked up again, simply quit the application and restarted.  But it keeps locking up.
    While I can move the cursor around and switch to another application, I cannot access anything in the existing  email thread window.  However, I can look at other emails from the main window.  Very weird.
    To be even more descriptive, I can open an individual email and respond to that.  But when I try to respond to an email that is in the right sidebar as part of a thread, that's where it locks up.  Problem is repeatable every time I try it.
    I have a 21.5 inch iMac, mid-2010 with 4 GB memory, 3.6 Ghz Core i5.  No plugins or software that interacts with Mail.  Never had a real software problem after upgrades (yep, lucky!), Mac user since 1986.  Have not contacted Applecare since I can work around this problem for a while, and don't want to load up the system during what could be a heavy period for support.
    Steve
    p.s. -- while minor, I have another problem with jpeg attachments.  There is an option to add photos to iPhoto from a Mail message, but it no longer works after upgrading to 10.8.2.  I have to download all photos into the Downloads folder, open iPhoto and drag files into that application.  I regularly use the short cut directly from Mail, and noticed this right away.  I have iPhoto 9.4.

    Are you using multiple accounts?  If so then I may have the solution.
    My accounts were set up within mail preferences on 10.8.1.  When I upgraded to 10.8.2 Mail froze, nothing I did would unfreeze it.  So after I return my new MacBook and got a new one the same thing happened again! 
    Here is what I did this time:
    1)     Create a new user profile
    2)     Put in your main iCloud log in
    3)     Do not add your other iCloud adresses using Mail instead go to System Preferences and Mail, Contacts, Calendars and add them there
    Please note this will not work on your existing log in as when you go to System Preferences your old email accounts will cause it to crash as well as mail.
    What might have been easier is if Apple had got mail to come up with a message like 'iCloud accounts should be added through system preferences' instead of crashing every time.  Of course it does make you wonder why mail even has a preferences with an option to add accounts?!
    Hope this helps.

  • Locked out - permissions problem - List Fetching instead of my name under Get Info

    locked out - permissions problem - List Fetching instead of my name under Get Info - can nott unlock files and some apps

    For 10.7, hold down Command R at Startup and you get recovery Mode Utilities.
    Choose Disk Utility. Select your Hard drive. Check the SMART Status for "Verified. Select the Boot Volume, by default it is "Macintosh HD".Run REPAIR disk. If it completes without incident, run Repair Permissions as well.
    You can also hold down Option at Startup, and Choose Recovery HD as the boot device. It gets you to the same place in Utilities.

  • My macbook pro  is stuck in caps lock, among other problems

    my macbook pro (now leopard 10.6) is stuck in caps lock, no matter if the caps lock key is on or if I use shift, and windows close very slowly. I also can't erase the hard drive with my Mac OS X dvd. I can't login because my password requires numbers I can't access due to the caps lock problems, but sometimes it randomly logs me in without asking for my password.

    Which version of OS X is running on the machine? When you say that the installation DVD is 'stuck' do you mean physically stuck in the machine and you cannot boot from it?
    Unless your running Lion or Mountain Lion, both of which have Recovery partitions, I would think that you're simply 'stuck' if you cannot boot from the DVD. At this point, I would take the machine to an Apple Store or an AASP for a free diagnosis and repair estimate. If it turns out that you've a failed hard drive, of course, you can always replace it yourself.
    Clinton

  • XY graph - multi-plot problem

    Hi,
    I'm experiencing a problem using a multi-plot xy graph. I have to display 2 plots together, and make them appear and disappear many times during the program running.
    But when I close LV and restart it, the second plot (plot1) doesn't appear, and also I lose all the properties I've set for it (name, color,...). If I don't shut down LV everything works well.
    What can I do?

    Stefano Moret wrote:
    When you write about use property nodes, I'm using the "visible" one.
    Your suggestion is to try also to set all the properties from there? Maybe it's a good idea, I'll try.
    Here are some code snippets I used once to initialize the graph and later on change legend entries depending on user selection.
    You can also change the way plots are represented during run time. You always have to start with ActPlot do selct one of the plots.
    Good luck

  • Lock entries making problem

    Hi Experts,
    We are facing one problem durring updating the records in background 'Z' transaction. It will update the a record in mm02. The updated record will store in a Z table.
    But while executing mass records(multiple records) its getting error as lock entries. This error also coming after 1000 records. Upto 1000 records we are not getting any error. After this lock entries error comming.
    Can any one pls guide me what will be the reason behind this? Even while updating the 'Z' records we are added the commit work also . Still the same error comming. Kindly guide as.
    Moahana.

    Hi
    I hope you are using ENQUEUE_E_TABLE and DEQUEUE_E_TABLE FM while updated the tables
    Yes Commit statement is very important while updating the records in Tables
    Regards
    Renu Gusain

  • Lock table overflow problem in  transaction sm58

    Hi ,
    I have a file to idoc scenario.I am on xi 7.0 sp09.
    I am posting about 10000 records at one time in a 1 mb file.
    In idx5 i am able to idocs .
    However in transaction SM58 I am seeing Lock table overflow error .
    Regards ,
    Deepak

    Deepak,
    Here you can solve the problem in two ways
    1) increase the size of the lock table via parameter
    enque/table_size
    2) or increase the enque work processes from 1 to 2 or 3
    via parameter rdisp/wp_no_enq
    Please have a look on SAP Note: 928044.
    ---Satish

  • Designjet750c+ long plot problem

    Need to perform a custom plot (8ft long)
    Can print all the standard paper sizes up to A0, but I now have a 3ft x 8ft plot at 1:1 scale and no obvious way to do it! 36″ roll paper, 150ft long and I’m currently reduced to max plot size of A0 sections?
    Sure its a driver issue, yet there used to be hdi drivers around for acad, have tried all the HP drivers without success!
    There is something out there that says system drivers will only print a max plot size of something like 48", I've managed to plot an oversize A0 at about 1 metre. Thats seems to be the limit. To get longer plots a non system driver is needed, hence I thought that various cad systems would have supplied some, but they don't seem to!
    For isnstance, in Solidworks SW2010 drawing I can create a custom page but the system printer driver won't follow suit!
    Yet any commercial printer shops will copy some plans for you off a roll from a similar machine, so there must be a solution to this somewhere.
    Just out of interest I have done a printer memory upgrade, Post script rom upgrade and it is a network printer.
    Any help etc, appreciated.

    I do not have an answer, but you may have better results asking the question in the Designjet forum here.  The forum here is more for consumer level devices, there are more Designjet experts in the Designjet forum.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • XY Scatter Plot Problems

    XY scatter plots that were successful previously now are in error.  They now appear as "column type" charts with the horizontal axis simply the index of the data point (that is, 1, 2, 3, ...).  This problem has appeared after the recent
    update of MS Office 2013.  Please help quickly!

    Hi,
    Plese try to change the chart type.  Click the chart->Design Tab->Change Chart Type->choose
    X Y Scatter.
    Also when right click the chart->Select Data, what does the labels of
    Legend and Horizontal look like?
    If possible, please share the workbook with us ,you can upload the file to a file sharing site and then share the link here.
    Wind Zhang
    TechNet Community Support

  • Stacked plots problem in exe

    Hi,
    Ive got a problem with creating .exe application where 2nd chart functioning properly.
    2nd chart is in subpanel as a stacked plot. I pass via main form numbers of stacked plots. In builder it works perfectly, in .exe not at all..
    Any ideas?
    Attachments:
    WykresOnlineCAN.zip ‏73 KB

    Ok sorry I didnt explain well whats the point.
    There is no problem with properly "refreshing"  of subplot - works fine even without static reference(but thanks anyway, I missed that).
    I cannot changed the number of staked plots in the screen(constanly 1) - in editor mode it changes according as number of flaged plots.
    The problem is show in the pictures below.
    Attachments:
    editor mode.png ‏60 KB
    in exe.png ‏57 KB

  • Locking an object problem

    We are customizing our Plumtree Portal 5.0.2 to all the gadgets developers to send an HTTP header called "Refresh-all","Gadget Name". When this header is sent the portal should refresh the gadget provided in the header to flush it's content. The only problem that we are facing now is storing the changes made to the Gadget Admin Settings
    here's the code
    IPTObjectManager objectManager = (IPTObjectManager) ptSession.GetGadgets();
    IPTGadget gadgetToRefresh = (IPTGadget)objectManager.Open(portletID,false);
    IPTServerContext serverContext = (IPTServerContext)gadgetToRefresh.GetInterfaces("IPTServerContext");
    serverContext.LockObject();
    serverContext.Store();
    serverContext.UnlockObject();
    When the logged in user is not an admin this gives an error and PTSpy reported that the user doesn't have enough priviliges to lock the object. the ptSession is the current user session retrieved by the function GetUserSession()
    Any proposed work around or any way to get an admin session will be great
    TIA

    We are customizing our Plumtree Portal 5.0.2 to all the gadgets developers to send an HTTP header called "Refresh-all","Gadget Name". When this header is sent the portal should refresh the gadget provided in the header to flush it's content. The only problem that we are facing now is storing the changes made to the Gadget Admin Settings
    here's the code
    IPTObjectManager objectManager = (IPTObjectManager) ptSession.GetGadgets();
    IPTGadget gadgetToRefresh = (IPTGadget)objectManager.Open(portletID,false);
    IPTServerContext serverContext = (IPTServerContext)gadgetToRefresh.GetInterfaces("IPTServerContext");
    serverContext.LockObject();
    serverContext.Store();
    serverContext.UnlockObject();
    When the logged in user is not an admin this gives an error and PTSpy reported that the user doesn't have enough priviliges to lock the object. the ptSession is the current user session retrieved by the function GetUserSession()
    Any proposed work around or any way to get an admin session will be great
    TIA

  • Locked / Secure Printing problems in Excel

    Same problem posted by Jayne BJH earlier this month.
    Staff share a printer and everyone has a default printer setting for Locked printing.  We have issues with Excel documents only that may have been created by someone else - the Excel documents maintain the original users - username and passcode so anyone
    else trying to print the document cannot retrieve it unless they go in and change the details.
    This does not happen with Word documents.    For Excel they actually have to change the Locked Print settings for every worksheet in the document.
    We are printing to a Ricoh printer.   It happens when the document is e-mailed to someone or when they print from a server location.
    How do we get this to stop? 

    It seems that your issue is similar to Jayne's, am I right? If so , you can reply in that thread.
    Cause I found that he didn't reply back.
    In addition, if you right click the Excel file to check the properties, does it show the file blocked ?
    Wind Zhang
    TechNet Community Support

  • Lock and Send problem

    I have problem with Essbase Add-in not locking and sending. We can get it to lock and send once on a new app, but can't do subsiquent locks. Is there a setting issue? We have two servers, one Essbase 6.1.3a and NT4.0, the other Essbase 6.5.3 and Win2K and both have same problem. I would appreciate any help offered.

    If the data is in the ATX file, I would say your lock and send is working.I am trying to work out what "doesn't work" means ... do you get #missing when you do a retrieve or just an old value?You say this works on a new app ... i.e. is this an EMPTY app? ie. does the first entered value retrieve back into Excel?It is possible that you have an implicit share issue here ie. one parent/one child situations in the hierarchy.

  • IPad Mini Locked & iTunes version problems

    My daughter got an iPad Mini for her recent birthday. I also received an iPhone 5 for mine (happy days). My PC is an 8 year old iMac. We have two problems:
    *My daughter entered a pass code to her Mini, forgot it and has now locked herself out after too many attempts to remember it (shes 11). All recommended solutions involve using iTunes
    * My iPhone 5 will not back up to the version of iTunes that is on the PC, nor will my daughters Mini saying it needs a newer version of iTunes (10.7 or later).
    Despite several attempts, my PC refuses to download/support any newer versions of iTunes rendering the stored half of my music/video library redundant and not being able to restore my daughters iPad mini. My questions are:
    1. Do I have to purchase a whole new PC just to support our new Apple products??
    2. How do we unlock my daughters iPad mini if the PC doesnt recognise it
    Yours in frustration
    Bob

    I assume you are running Windows XP?
    Make sure Windows is up to date. iTunes 11.0.4 requires XP to be on at least Service Pack 2 (most current is Service Pack 3).
    To check go to Start > Right-Click on My Computer > Properties > General
    If you aren't  uop to date, here is a link to XP SP3: Download the Windows XP Service Pack 3 package now
    http://www.microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08 -1E1555D4F3D4Once you have the current SP, run Windows Update to make sure you are current
    After Windows XP is up to date, download and install iTunes 11.0.4 from here:
    iTunes 11.0.4
    Upgrading iTunes will not compromise your content.

  • Evictor/UtilizationProfile locking - severe performance problem

    I have a database with 2.5 million entries, 10 - 20 bytes keys and 40kb values (about 200 GB overall).
    je.properties:
    je.maxMemory=419430400
    je.evictor.lruOnly=false
    je.env.isTransactional=false
    je.cleaner.threads=40
    je.evictor.nodesPerScan=100
    I know I can't fit the data in the cache, but the tree should fit. The access pattern is random.
    The situation is this:
    Every get or put is causing an eviction. To do this the PrivateEvictor must be locked:
    "NioProcessor-1" prio=3 tid=0x08d91c00 nid=0x47 waiting for monitor entry [0x70fcb000..0x70fcb970]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at com.sleepycat.je.evictor.Evictor.doEvict(Evictor.java:228)
         - waiting to lock <0x7f157c68> (a com.sleepycat.je.evictor.PrivateEvictor)
         at com.sleepycat.je.evictor.Evictor.doCriticalEviction(Evictor.java:269)
    at com.sleepycat.je.dbi.CursorImpl.close(CursorImpl.java:711)
         at com.sleepycat.je.Cursor.close(Cursor.java:326)
    Once it has a lock on the evictor it seems to need to lock the UtilizationProfile:
    "NioProcessor-25" prio=3 tid=0x08ee4800 nid=0x5f waiting for monitor entry [0x70833000..0x70833970]
    java.lang.Thread.State: BLOCKED (on object monitor)
         at com.sleepycat.je.cleaner.UtilizationProfile.putFileSummary(UtilizationProfile.java:787)
         - waiting to lock <0x7f55bf70> (a com.sleepycat.je.cleaner.UtilizationProfile)
         at com.sleepycat.je.cleaner.UtilizationProfile.flushFileSummary(UtilizationProfile.java:776)
         at com.sleepycat.je.cleaner.UtilizationTracker.evictMemory(UtilizationTracker.java:100)
         at com.sleepycat.je.evictor.PrivateEvictor.startBatch(PrivateEvictor.java:109)
         at com.sleepycat.je.evictor.Evictor.evictBatch(Evictor.java:302)
         at com.sleepycat.je.evictor.Evictor.doEvict(Evictor.java:244)
         - locked <0x7f157c68> (a com.sleepycat.je.evictor.PrivateEvictor)
         at com.sleepycat.je.evictor.Evictor.doCriticalEviction(Evictor.java:269)
    But that is locked by a cleaner thread which holds onto the lock the whole time that it is deciding which file to delete:
    "Cleaner-19" daemon prio=3 tid=0x08d35800 nid=0x2f runnable [0x71763000..0x71763970]
    java.lang.Thread.State: RUNNABLE
         at java.util.TreeMap.successor(Unknown Source)
         at java.util.TreeMap$PrivateEntryIterator.nextEntry(Unknown Source)
         at java.util.TreeMap$EntryIterator.next(Unknown Source)
         at java.util.TreeMap$EntryIterator.next(Unknown Source)
         at com.sleepycat.je.cleaner.UtilizationProfile.getBestFileForCleaning(UtilizationProfile.java:344)
         - locked <0x7f55bf70> (a com.sleepycat.je.cleaner.UtilizationProfile)
         at com.sleepycat.je.cleaner.FileSelector.selectFileForCleaning(FileSelector.java:187)
         at com.sleepycat.je.cleaner.FileProcessor.doClean(FileProcessor.java:197)
         - locked <0x7f153340> (a com.sleepycat.je.cleaner.FileProcessor)
         at com.sleepycat.je.cleaner.FileProcessor.onWakeup(FileProcessor.java:138)
         at com.sleepycat.je.utilint.DaemonThread.run(DaemonThread.java:141)
         at java.lang.Thread.run(Unknown Source)
    This seems to take quite a while.
    So basically I have about worker 50 threads all waiting to lock the evictor and horrible throughput and response times.
    Problems that I see:
    1. If an eviction is in progress having other threads waiting to try to evict more stuff seems pointless.
    2. It is impossible for evictions to happen in parallel.
    3. The locking on UtilizationProfile to way too coarse: cleaner threads shouldn't be able to block evictions for long periods of time.
    4. getBestFileForCleaning doesn't seem very efficient. Big TreeMaps are getting copied around and iterated over. If the data was kept in a priority queue cleaner threads might be able to quickly take the best file of the queue.
    5. Ideally nothing would be being added to or evicted from the cache all the time. Because of my data access patterns I know that having the values in the cache is pointless, and get and puts could bypass the cache completely.

    Hello Cormac,
    If you're a customer, please contact me via email to take this offline (charles.lamb @ o.com).
    Here are some suggestions, questions, and comments:
    . Do you see this particular thread dump all the time or just occasionally? In other words, is it always the same or just certain parts of it? I know you're seeing the eviction part all the time, but what about the Cleaner Thread?
    . One workaround you can try is to increase the amount of cache for the Utilization tracker. You can do this by changing the EnvironmentConfig.CLEANER_DETAIL_MAX_MEMORY_PERCENTAGE. It defaults to 2% so moving it to 5% might have a big impact.
    . Your cache size is << your database size. Have you run DbCacheSize to see if you have sized your cache large enough to fit all of the internal tree nodes in memory? In general, you don't have a lot of cache so an increase in cache size may yield a significant increase in performance.
    . You can look at the stats and if there is no cleaner backlog, you can reduce the number of cleaner threads from 40.
    . You can try increasing the log file size from the default of 10MB to (say) 50 or 100MB.
    Charles Lamb

Maybe you are looking for