[locked] php ultradev 4

Hi there,
I am using Dreamweaver Ultradev 4.  Very old I know. I would like to set my self up for a database connection using php, mysql.  I can't seem to find a compatible server model extension to set up my site.  I have tried the one from Adobe but it is only for ver 6 and up.
Can anyone help me out?
Thank you
Patrick

I´m locking this thread, because the same question has been posted to the regular Dreamweaver forum and was later answered in the Application Development forum

Similar Messages

  • Php ultradev 4

    Hi there,
    I am using Dreamweaver Ultradev 4.  Very old I know. I would like to set myself up for a database connection using php, mysql.  I can't seem to find a compatible server model extension to set up my site.  I have tried the one from Adobe but it is only for ver 6 and up.
    Can anyone help me out?
    Thank you
    Patrick

    UltraDev 4 used the PHPakt extension for PHP/MySQL support and it is no longer available because the company was bought by Adobe.
    Ken Ford

  • [Locked] php sql code

    hello
    i need to write a query that displays the best 10 out of 15 fifteen results. 99% of the code is easy, but can't figute out to dislpay the 'best 10 out of 15' bit.
    any ideas?

    in our fishing club, the club champion is the one with the most total points.
    the total points is the made up of their best 10 scores over 15 matches.
    i'm exploring the option at the moment of do a sort on all 15 results in desc order.
    i'll put all these values into an array using push_array.
    i'll then run a loop on the first 10 array values, which should be the highest 10, and add these to a totalpointsamount variable as i go.
    i'll then display this variable, which should be what i'm looking for.
    this does seem a long roundabout way of doing this though. i'm sure there must be an sql command that would do the job on query though.

  • DVD Menu with Password

    I need to know if there is a way to put a password on a DVD Menu to limit access to it's contents.

    For fun but not for real protection (meaning you cannot protect material "for real" by using a password on a menu)
    Project
    http://www.dvdstepbystep.com/lock.php
    Alternate Code For Project
    http://www.dvdstepbystep.com/jake.jpg
    Discussion
    http://discussions.apple.com/thread.jspa?messageID=3056193&#3056193

  • Template with php script, white space around background, locking layers

    two questions for 2 sites:
    1.) first site http://www.beckervanhoveln.com
    I can't get my background to line up correctly; there is a giant white border around the whole thing. With the amount of extra space around the background on all sides, I think it may be an issue with the illustrator file I am importing, but I can't see any way to fix it there, either. All the margins that I can find to change relating to that background are set to 0. Any ideas on what could be causing this? The image in Illustrator is 14" wide, so it's plenty wide enough to cover the whole page.
    2.) site http://sai.theclothesgallery.com
    I inserted php scripts into a page (in the editable paragraph region) and it is messing up the alignment of the page. Compare what you get on the home page with what you get when you click the "client login" button. Also, wondering where the extra body area came from on page http://sai.theclothesgallery.com/protected_downloads_zdr/validuser.php.
    On both sites I am using wrapper and body tags, as directed in the tutorial by Nate (great one, thanks!). On my old site, http://www.theclothesgallery.com, everything works fine, but on the new ones I am just out of my mind. I've spent 10 hours over the last 2 days doing research and trying to manipulate code, to no avail. Thanks to anyone who can help.
    Finally, is there a way to lock a layer inside or on top of another layer. for example, the layer the body text is in on site http://sai.theclothesgallery.com is on top of the layer that holds the page's images (which is an imported illustrator file with slices). Is there a way to lock that layer to the first one so it doesn't move if I make changes?

    Kelly,
    1. The image itself has a white border. You will need to crop that image
    in an image editor such as Photoshop.
    2. Looking at the source of the page you have two  sections and
    two opening  toags but only one closingtag. The PHP
    script is probably creating the additional sections, but without seeing
    the script it is impossible to say for certain.
    2a. You probably have a space or blank line before the opening

  • Ultradev 4 php

    Hi there,
    I am using Dreamweaver Ultradev 4.  Very old I know. I would like to set myself up for a database connection using php, mysql.  I can't seem to find a compatible server model extension to set up my site.  I have tried the one from Adobe but it is only for ver 6 and up.
    Can anyone help me out?
    Thank you
    Patrick

    UltraDev 4 used the PHPakt extension for PHP/MySQL support and it is no longer available because the company was bought by Adobe.
    Ken Ford

  • Squirrelmail/php - accounts locked out

    I'm needing some help with Squirrelmail.
    Tiger Server 10.4.2
    Squirrelmail 1.4.5
    php 4.3.11
    I am experiencing the same problem as here. I have changed the session.gc_maxlifetime variable in php. This worked for about a month, last week users who logged in to SM occassionally became locked out of their account, the imapd process for their session had changed to the status of U (uninterruptible). Rebooting the server is the only solution. This has to be a SM or php issue, there are no problems with using any other email client, Outlook, T-bird, Eudora, etc. Does anyone have any other solutions?

    The problem appears to have been solved. Check this thread for the solution: http://discussions.apple.com/thread.jspa?threadID=320386&tstart=0
    Quicksilver 733   Mac OS X (10.4.2)  

  • Editing a large PHP file, using {, }, (, ), or comma causing DW to lock-up

    I have a PHP file totalling around 7,000 lines of code. When I write { or }, ( or ), or a comma, at any point in the file, DW locks-up for a few seconds, then continues. This has been happening ever since I started using Dreamweaver CS4 - it never occurred with older versions.
    Any ideas?
    [Post moved to more appropriate forum -Forum Moderator]

    I don't have PHP files that are as long as that, so have no way of testing. However, one possibility is that Syntax Error Alerts are turned on. Dreamweaver CS4 doesn't check for PHP syntax errors; the syntax checker is for JavaScript. However, having the option turned on might cause the problem, because PHP and JavaScript both use braces and parentheses. Try turning off real-time syntax checking. It's toggled on and off by clicking the button in the Coding toolbar, as shown in the following screenshot:
    When turned on, the button looks pressed in like the two immediately above it in the screenshot.
    If that doesn't improve the situation, I suggest that you file a report to the Dreamweaver engineering team through the bug report form at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform. Give as much detail as possible to help the engineers try to reproduce the problem.

  • PHP refuses to be rendered

    Hi,
    I've used the default PHP installation on OSX with no problems in the past (after uncommenting the 2 lines in httpd and enabling Personal Web Sharing), but after a recent reinstallation of the operating system (having re-updated all software) PHP refuses to render. HTML files render fine, but when I load up a PHP file, its source is displayed instead of being properly rendered. I like to think I know what I'm doing, but I'm befuddled :/
    Any help would be much appreciated.
    Here's my httpd.conf, if it helps:
    <pre>
    ## httpd.conf -- Apache HTTP server configuration file
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:<a class="jive-link-external-small" href="http://">http://httpd.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
    # you will save yourself a lot of trouble.
    ServerRoot "/usr"
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USEFCNTL_SERIALIZEDACCEPT or
    # USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename.
    #LockFile "/private/var/run/httpd.lock"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile "/private/var/run/httpd.pid"
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile "/private/var/run/httpd.scoreboard"
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig /private/etc/httpd/srm.conf
    #AccessConfig /private/etc/httpd/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    MinSpareServers 5
    MaxSpareServers 10
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    StartServers 5
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    MaxClients 150
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file http://httpd.apache.org/docs/dso.html for more
    # details about the DSO mechanism and run `httpd -l' for the list of already
    # built-in (statically linked and thus always available) modules in your httpd
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.so
    #LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
    #LoadModule env_module libexec/httpd/mod_env.so
    LoadModule configlogmodule libexec/httpd/modlogconfig.so
    #LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
    LoadModule mime_module libexec/httpd/mod_mime.so
    LoadModule negotiation_module libexec/httpd/mod_negotiation.so
    #LoadModule status_module libexec/httpd/mod_status.so
    #LoadModule info_module libexec/httpd/mod_info.so
    LoadModule includes_module libexec/httpd/mod_include.so
    LoadModule autoindex_module libexec/httpd/mod_autoindex.so
    LoadModule dir_module libexec/httpd/mod_dir.so
    LoadModule cgi_module libexec/httpd/mod_cgi.so
    LoadModule asis_module libexec/httpd/mod_asis.so
    LoadModule imap_module libexec/httpd/mod_imap.so
    LoadModule action_module libexec/httpd/mod_actions.so
    #LoadModule speling_module libexec/httpd/mod_speling.so
    LoadModule userdir_module libexec/httpd/mod_userdir.so
    LoadModule alias_module libexec/httpd/mod_alias.so
    LoadModule rewrite_module libexec/httpd/mod_rewrite.so
    LoadModule access_module libexec/httpd/mod_access.so
    LoadModule auth_module libexec/httpd/mod_auth.so
    #LoadModule anonauthmodule libexec/httpd/modauthanon.so
    #LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
    #LoadModule digest_module libexec/httpd/mod_digest.so
    #LoadModule proxy_module libexec/httpd/libproxy.so
    #LoadModule cernmetamodule libexec/httpd/modcernmeta.so
    #LoadModule expires_module libexec/httpd/mod_expires.so
    #LoadModule headers_module libexec/httpd/mod_headers.so
    #LoadModule usertrack_module libexec/httpd/mod_usertrack.so
    LoadModule logforensicmodule libexec/httpd/modlogforensic.so
    #LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
    LoadModule setenvif_module libexec/httpd/mod_setenvif.so
    #LoadModule dav_module libexec/httpd/libdav.so
    #LoadModule ssl_module libexec/httpd/libssl.so
    #LoadModule perl_module libexec/httpd/libperl.so
    LoadModule php4_module libexec/httpd/libphp4.so
    LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
    # Reconstruction of the complete module list from all available modules
    # (static and shared ones) to achieve correct module execution order.
    # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
    ClearModuleList
    #AddModule modvhostalias.c
    #AddModule mod_env.c
    AddModule modlogconfig.c
    #AddModule modmimemagic.c
    AddModule mod_mime.c
    AddModule mod_negotiation.c
    #AddModule mod_status.c
    #AddModule mod_info.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    #AddModule mod_speling.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_rewrite.c
    AddModule mod_access.c
    AddModule mod_auth.c
    #AddModule modauthanon.c
    #AddModule modauthdbm.c
    #AddModule mod_digest.c
    #AddModule mod_proxy.c
    #AddModule modcernmeta.c
    #AddModule mod_expires.c
    #AddModule mod_headers.c
    #AddModule mod_usertrack.c
    AddModule modlogforensic.c
    #AddModule moduniqueid.c
    AddModule mod_so.c
    AddModule mod_setenvif.c
    #AddModule mod_dav.c
    #AddModule mod_ssl.c
    #AddModule mod_perl.c
    AddModule mod_php4.c
    AddModule modhfsapple.c
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If your ServerType directive (set earlier in the 'Global Environment'
    # section) is set to "inetd", the next few directives don't have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    Port 80
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group "#-1" on these systems!
    User nobody
    Group nobody
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    #ServerName new.host.name
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/Users/borischerny/Sites"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/Users/borischerny/Sites">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    <IfModule mod_userdir.c>
    UserDir public_html
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>
    # Apple specific filesystem protection.
    <Files "rsrc">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>
    <Directory ~ ".*\.\.namedfork">
    Order allow,deny
    Deny from all
    Satisfy All
    </Directory>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig /private/etc/httpd/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The modmimemagic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # modmimemagic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include modmimemagic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule modmimemagic.c>
    MIMEMagicFile /private/etc/httpd/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/private/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "/private/var/log/httpd/access_log" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog "/private/var/log/httpd/referer_log" referer
    #CustomLog "/private/var/log/httpd/agent_log" agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/private/var/log/httpd/access_log" combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # EBCDIC configuration:
    # (only for mainframes using the EBCDIC codeset, currently one of:
    # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
    # The following default configuration assumes that "text files"
    # are stored in EBCDIC (so that you can operate on them using the
    # normal POSIX tools like grep and sort) while "binary files" are
    # stored with identical octets as on an ASCII machine.
    # The directives are evaluated in configuration file order, with
    # the EBCDICConvert directives applied before EBCDICConvertByType.
    # If you want to have ASCII HTML documents and EBCDIC HTML documents
    # at the same time, you can use the file extension to force
    # conversion off for the ASCII documents:
    # > AddType text/html .ahtml
    # > EBCDICConvert Off=InOut .ahtml
    # EBCDICConvertByType On=InOut text/* message/* multipart/*
    # EBCDICConvertByType On=In application/x-www-form-urlencoded
    # EBCDICConvertByType On=InOut application/postscript model/vrml
    # EBCDICConvertByType Off=InOut /
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    Alias /icons/ "/usr/share/httpd/icons/"
    <Directory "/usr/share/httpd/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # This Alias will project the on-line documentation tree under /manual/
    # even if you change the DocumentRoot. Comment it if you don't want to
    # provide access to the on-line documentation.
    Alias /manual/ "/Library/WebServer/Documents/manual/"
    <Directory "/Library/WebServer/Documents/manual">
    Options Indexes FollowSymlinks MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
    # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/Library/WebServer/CGI-Executables">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbreviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .sv
    AddLanguage cs .cz .cs
    AddLanguage ru .ru
    AddLanguage zh-TW .zh-tw
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    AddType application/x-tar .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress .Z
    AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #AddType application/x-compress .Z
    #AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other-server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your-domain.com" to match your domain to enable.
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your-domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phfabuselog.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "/private/var/run/proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a-domain.com another-domain.edu joes.garage-sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *:80
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *:80>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>
    </pre>

    sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
    <pre>
    <IfModule mod_php4.c>
    AddType application/x-httpd-php .php
    </IfModule>
    </pre>

  • PHP Issue

    I currently have been hacking around trying to get the pre-installed php that comes with Mac OS X enabled, but seem unable to get the page viewable from localhost or just simply viewing it in safari through finder. It gives me the underlying code when I try to view it, ie the php isn't running ... my httpd.conf file is below: Help greatly appreciated on this! Thanks
    ## httpd.conf -- Apache HTTP server configuration file
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:<a class="jive-link-external-small" href="http://">http://httpd.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
    # you will save yourself a lot of trouble.
    ServerRoot "/usr"
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USEFCNTL_SERIALIZEDACCEPT or
    # USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename.
    #LockFile "/private/var/run/httpd.lock"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile "/private/var/run/httpd.pid"
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile "/private/var/run/httpd.scoreboard"
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig /private/etc/httpd/srm.conf
    #AccessConfig /private/etc/httpd/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    MinSpareServers 5
    MaxSpareServers 10
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    StartServers 5
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    MaxClients 150
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file http://httpd.apache.org/docs/dso.html for more
    # details about the DSO mechanism and run `httpd -l' for the list of already
    # built-in (statically linked and thus always available) modules in your httpd
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.so
    #LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
    #LoadModule env_module libexec/httpd/mod_env.so
    LoadModule configlogmodule libexec/httpd/modlogconfig.so
    #LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
    LoadModule mime_module libexec/httpd/mod_mime.so
    LoadModule negotiation_module libexec/httpd/mod_negotiation.so
    #LoadModule status_module libexec/httpd/mod_status.so
    #LoadModule info_module libexec/httpd/mod_info.so
    LoadModule includes_module libexec/httpd/mod_include.so
    LoadModule autoindex_module libexec/httpd/mod_autoindex.so
    LoadModule dir_module libexec/httpd/mod_dir.so
    LoadModule cgi_module libexec/httpd/mod_cgi.so
    LoadModule asis_module libexec/httpd/mod_asis.so
    LoadModule imap_module libexec/httpd/mod_imap.so
    LoadModule action_module libexec/httpd/mod_actions.so
    #LoadModule speling_module libexec/httpd/mod_speling.so
    LoadModule userdir_module libexec/httpd/mod_userdir.so
    LoadModule alias_module libexec/httpd/mod_alias.so
    LoadModule rewrite_module libexec/httpd/mod_rewrite.so
    LoadModule access_module libexec/httpd/mod_access.so
    LoadModule auth_module libexec/httpd/mod_auth.so
    #LoadModule anonauthmodule libexec/httpd/modauthanon.so
    #LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
    #LoadModule digest_module libexec/httpd/mod_digest.so
    #LoadModule proxy_module libexec/httpd/libproxy.so
    #LoadModule cernmetamodule libexec/httpd/modcernmeta.so
    #LoadModule expires_module libexec/httpd/mod_expires.so
    #LoadModule headers_module libexec/httpd/mod_headers.so
    #LoadModule usertrack_module libexec/httpd/mod_usertrack.so
    LoadModule logforensicmodule libexec/httpd/modlogforensic.so
    #LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
    LoadModule setenvif_module libexec/httpd/mod_setenvif.so
    #LoadModule dav_module libexec/httpd/libdav.so
    #LoadModule ssl_module libexec/httpd/libssl.so
    #LoadModule perl_module libexec/httpd/libperl.so
    LoadModule php4_module libexec/httpd/libphp4.so
    LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
    # Reconstruction of the complete module list from all available modules
    # (static and shared ones) to achieve correct module execution order.
    # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
    ClearModuleList
    #AddModule modvhostalias.c
    #AddModule mod_env.c
    AddModule modlogconfig.c
    #AddModule modmimemagic.c
    AddModule mod_mime.c
    AddModule mod_negotiation.c
    #AddModule mod_status.c
    #AddModule mod_info.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    #AddModule mod_speling.c
    AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_rewrite.c
    AddModule mod_access.c
    AddModule mod_auth.c
    #AddModule modauthanon.c
    #AddModule modauthdbm.c
    #AddModule mod_digest.c
    #AddModule mod_proxy.c
    #AddModule modcernmeta.c
    #AddModule mod_expires.c
    #AddModule mod_headers.c
    #AddModule mod_usertrack.c
    AddModule modlogforensic.c
    #AddModule moduniqueid.c
    AddModule mod_so.c
    AddModule mod_setenvif.c
    #AddModule mod_dav.c
    #AddModule mod_ssl.c
    #AddModule mod_perl.c
    AddModule mod_php4.c
    AddModule modhfsapple.c
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    #ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If your ServerType directive (set earlier in the 'Global Environment'
    # section) is set to "inetd", the next few directives don't have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    Port 80
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group "#-1" on these systems!
    User nobody
    Group nobody
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    #ServerName new.host.name
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/Library/WebServer/Documents"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/Library/WebServer/Documents">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    <IfModule mod_userdir.c>
    UserDir public_html
    </IfModule>
    #<IfModule mod_php4.c>
    AddType application/x-httpd-php .php
    #AddType application/x-httpd-php .php4
    #AddType application/x-httpd-php-source .phps
    #</IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html index.php index.htm
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>
    # Apple specific filesystem protection.
    <Files "rsrc">
    Order allow,deny
    Deny from all
    Satisfy All
    </Files>
    <Directory ~ ".*\.\.namedfork">
    Order allow,deny
    Deny from all
    Satisfy All
    </Directory>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig /private/etc/httpd/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The modmimemagic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # modmimemagic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include modmimemagic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule modmimemagic.c>
    MIMEMagicFile /private/etc/httpd/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/private/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "/private/var/log/httpd/access_log" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog "/private/var/log/httpd/referer_log" referer
    #CustomLog "/private/var/log/httpd/agent_log" agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/private/var/log/httpd/access_log" combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # EBCDIC configuration:
    # (only for mainframes using the EBCDIC codeset, currently one of:
    # Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
    # The following default configuration assumes that "text files"
    # are stored in EBCDIC (so that you can operate on them using the
    # normal POSIX tools like grep and sort) while "binary files" are
    # stored with identical octets as on an ASCII machine.
    # The directives are evaluated in configuration file order, with
    # the EBCDICConvert directives applied before EBCDICConvertByType.
    # If you want to have ASCII HTML documents and EBCDIC HTML documents
    # at the same time, you can use the file extension to force
    # conversion off for the ASCII documents:
    # > AddType text/html .ahtml
    # > EBCDICConvert Off=InOut .ahtml
    # EBCDICConvertByType On=InOut text/* message/* multipart/*
    # EBCDICConvertByType On=In application/x-www-form-urlencoded
    # EBCDICConvertByType On=InOut application/postscript model/vrml
    # EBCDICConvertByType Off=InOut /
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/". If the fakename is slash-terminated, then the
    # realname must also be slash terminated, and if the fakename omits the
    # trailing slash, the realname must also omit it.
    Alias /icons/ "/usr/share/httpd/icons/"
    <Directory "/usr/share/httpd/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # This Alias will project the on-line documentation tree under /manual/
    # even if you change the DocumentRoot. Comment it if you don't want to
    # provide access to the on-line documentation.
    Alias /manual/ "/Library/WebServer/Documents/manual/"
    <Directory "/Library/WebServer/Documents/manual">
    Options Indexes FollowSymlinks MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
    # "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/Library/WebServer/CGI-Executables">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    ReadmeName README.html
    HeaderName HEADER.html
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbreviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .sv
    AddLanguage cs .cz .cs
    AddLanguage ru .ru
    AddLanguage zh-TW .zh-tw
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    AddType application/x-tar .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress .Z
    AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #AddType application/x-compress .Z
    #AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other-server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your-domain.com" to match your domain to enable.
    #<Location /server-status>
    # SetHandler server-status
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your-domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phfabuselog.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your-domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "/private/var/run/proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a-domain.com another-domain.edu joes.garage-sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *:80
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *:80>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>

    gparker03 wrote:
    Holy cow .... http://localhost/index.php is working! So basically the php has to be run ON the apache server correct? How would I get it to run in something like Coda? It's not viewable currently in Coda's preview menu.
    Hmm. I downloaded Coda and messed with it a bit and I can't figure out how to get it to do that. Basically, you'd need a way to get it to recognize that the files need to be previewed with the Apache server instead of just reading them from the temporary files it seems to create. You might have to resort to using two apps open: Coda for editing, then just switch to your regular browser and access it through the "http://localhost" address. That's basically what I do. I edit in TextMate or BBEdit, then use a shortcut like "command-tab" to switch to my browser and preview it there.
    Also mysql is already installed correct?
    No, there's a user created for MySQL, but the server itself isn't installed. The best place to get it is from MySQL's web site. Just make sure you get the right version for your OS and CPU architecture.
    charlie

  • Webserver on DMZ cannot send email via php script using SMTP (cisco firewall pix 515e)

    Hello,
    I have two web servers that are sitting in a DMZ behind a Cisco Firewall PIX 515e. The webservers appear to be configured correctly as our website and FTP website are up. On two of our main website, we have two contact forms that use a simple html for to call a php script that uses smtp as its mailing protocol. Since, I am not the network administrator, I don't quite understand how to  read the current configurations on the firewall, but I suspect that port 25 is blocked, which prevents the script from actually working or sending out emails.  What I've done to narrow the problem done is the following: I used a wamp server to test our scripts with our smtp servers settings, was able to successfully send an email out to both my gmail and work place accounts. Currently, we have backupexec loaded on both of these servers, and when I try to send out an alert I never receive it. I think because port 25 is closed on both of those servers.  I will be posting our configuration. if anyone can take a look and perhaps explain to me how I can change our webservers to communicate and successfully deliver mail via that script, I would gladly appreciate it. our IP range is 172.x.x.x, but it looks like our webservers are using 192.x.x.x with NAT in place. Please someone help.
    Thanks,
    Jeff Mateo
    PIX Version 6.3(4)
    interface ethernet0 100full
    interface ethernet1 100full
    interface ethernet2 100full
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    nameif ethernet2 DMZ security50
    enable password GFO9OSBnaXE.n8af encrypted
    passwd GFO9OSBnaXE.n8af encrypted
    hostname morrow-pix-ct
    domain-name morrowco.com
    clock timezone EST -5
    clock summer-time EDT recurring
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    no fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names
    name 12.42.47.27 LI-PIX
    name 172.20.0.0 CT-NET
    name 172.23.0.0 LI-NET
    name 172.22.0.0 TX-NET
    name 172.25.0.0 NY-NET
    name 192.168.10.0 CT-DMZ-NET
    name 1.1.1.1 DHEC_339849.ATI__LEC_HCS722567SN
    name 1.1.1.2 DHEC_339946.ATI__LEC_HCS722632SN
    name 199.191.128.105 web-dns-1
    name 12.127.16.69 web-dns-2
    name 12.3.125.178 NY-PIX
    name 64.208.123.130 TX-PIX
    name 24.38.31.80 CT-PIX
    object-group network morrow-net
    network-object 12.42.47.24 255.255.255.248
    network-object NY-PIX 255.255.255.255
    network-object 64.208.123.128 255.255.255.224
    network-object 24.38.31.64 255.255.255.224
    network-object 24.38.35.192 255.255.255.248
    object-group service morrow-mgmt tcp
    port-object eq 3389
    port-object eq telnet
    port-object eq ssh
    object-group network web-dns
    network-object web-dns-1 255.255.255.255
    network-object web-dns-2 255.255.255.255
    access-list out1 permit icmp any any echo-reply
    access-list out1 permit icmp object-group morrow-net any
    access-list out1 permit tcp any host 12.193.192.132 eq ssh
    access-list out1 permit tcp any host CT-PIX eq ssh
    access-list out1 permit tcp any host 24.38.31.72 eq smtp
    access-list out1 permit tcp any host 24.38.31.72 eq https
    access-list out1 permit tcp any host 24.38.31.72 eq www
    access-list out1 permit tcp any host 24.38.31.70 eq www
    access-list out1 permit tcp any host 24.38.31.93 eq www
    access-list out1 permit tcp any host 24.38.31.93 eq https
    access-list out1 permit tcp any host 24.38.31.93 eq smtp
    access-list out1 permit tcp any host 24.38.31.93 eq ftp
    access-list out1 permit tcp any host 24.38.31.93 eq domain
    access-list out1 permit tcp any host 24.38.31.94 eq www
    access-list out1 permit tcp any host 24.38.31.94 eq https
    access-list out1 permit tcp any host 24.38.31.71 eq www
    access-list out1 permit tcp any host 24.38.31.71 eq 8080
    access-list out1 permit tcp any host 24.38.31.71 eq 8081
    access-list out1 permit tcp any host 24.38.31.71 eq 8090
    access-list out1 permit tcp any host 24.38.31.69 eq ssh
    access-list out1 permit tcp any host 24.38.31.94 eq ftp
    access-list out1 permit tcp any host 24.38.31.92 eq 8080
    access-list out1 permit tcp any host 24.38.31.92 eq www
    access-list out1 permit tcp any host 24.38.31.92 eq 8081
    access-list out1 permit tcp any host 24.38.31.92 eq 8090
    access-list out1 permit tcp any host 24.38.31.93 eq 3389
    access-list out1 permit tcp any host 24.38.31.92 eq https
    access-list out1 permit tcp any host 24.38.31.70 eq https
    access-list out1 permit tcp any host 24.38.31.74 eq www
    access-list out1 permit tcp any host 24.38.31.74 eq https
    access-list out1 permit tcp any host 24.38.31.74 eq smtp
    access-list out1 permit tcp any host 24.38.31.75 eq https
    access-list out1 permit tcp any host 24.38.31.75 eq www
    access-list out1 permit tcp any host 24.38.31.75 eq smtp
    access-list out1 permit tcp any host 24.38.31.70 eq smtp
    access-list out1 permit tcp any host 24.38.31.94 eq smtp
    access-list dmz1 permit icmp any any echo-reply
    access-list dmz1 deny ip any 10.0.0.0 255.0.0.0
    access-list dmz1 deny ip any 172.16.0.0 255.240.0.0
    access-list dmz1 deny ip any 192.168.0.0 255.255.0.0
    access-list dmz1 permit ip any any
    access-list dmz1 deny ip any any
    access-list nat0 permit ip CT-NET 255.255.0.0 192.168.220.0 255.255.255.0
    access-list nat0 permit ip host 172.20.8.2 host 172.23.0.2
    access-list nat0 permit ip CT-NET 255.255.0.0 LI-NET 255.255.0.0
    access-list nat0 permit ip CT-NET 255.255.0.0 NY-NET 255.255.0.0
    access-list nat0 permit ip CT-NET 255.255.0.0 TX-NET 255.255.0.0
    access-list vpn-split-tun permit ip CT-NET 255.255.0.0 192.168.220.0 255.255.255
    .0
    access-list vpn-split-tun permit ip CT-DMZ-NET 255.255.255.0 192.168.220.0 255.2
    55.255.0
    access-list vpn-dyn-match permit ip any 192.168.220.0 255.255.255.0
    access-list vpn-ct-li-gre permit gre host 172.20.8.2 host 172.23.0.2
    access-list vpn-ct-ny permit ip CT-NET 255.255.0.0 NY-NET 255.255.0.0
    access-list vpn-ct-ny permit ip CT-DMZ-NET 255.255.255.0 NY-NET 255.255.0.0
    access-list vpn-ct-tx permit ip CT-NET 255.255.0.0 TX-NET 255.255.0.0
    access-list vpn-ct-tx permit ip CT-DMZ-NET 255.255.255.0 TX-NET 255.255.0.0
    access-list static-dmz-to-ct-2 permit ip host 192.168.10.141 CT-NET 255.255.248.
    0
    access-list nat0-dmz permit ip CT-DMZ-NET 255.255.255.0 192.168.220.0 255.255.25
    5.0
    access-list nat0-dmz permit ip CT-DMZ-NET 255.255.255.0 LI-NET 255.255.0.0
    access-list nat0-dmz permit ip CT-DMZ-NET 255.255.255.0 NY-NET 255.255.0.0
    access-list nat0-dmz permit ip CT-DMZ-NET 255.255.255.0 TX-NET 255.255.0.0
    access-list static-dmz-to-ct-1 permit ip host 192.168.10.140 CT-NET 255.255.248.
    0
    access-list static-dmz-to-li-1 permit ip CT-DMZ-NET 255.255.255.0 CT-NET 255.255
    .248.0
    access-list vpn-ct-li permit ip CT-NET 255.255.0.0 LI-NET 255.255.0.0
    access-list vpn-ct-li permit ip CT-DMZ-NET 255.255.255.0 LI-NET 255.255.0.0
    access-list vpn-ct-li permit ip host 10.10.2.2 host 10.10.1.1
    access-list in1 permit tcp host 172.20.1.21 any eq smtp
    access-list in1 permit tcp host 172.20.1.20 any eq smtp
    access-list in1 deny tcp any any eq smtp
    access-list in1 permit ip any any
    access-list in1 permit tcp any any eq smtp
    access-list cap4 permit ip host 172.20.1.82 host 192.168.220.201
    access-list cap2 permit ip host 172.20.1.82 192.168.220.0 255.255.255.0
    access-list in2 deny ip host 172.20.1.82 any
    access-list in2 deny ip host 172.20.1.83 any
    access-list in2 permit ip any any
    pager lines 43
    logging on
    logging timestamp
    logging buffered notifications
    logging trap notifications
    logging device-id hostname
    logging host inside 172.20.1.22
    mtu outside 1500
    mtu inside 1500
    mtu DMZ 1500
    ip address outside CT-PIX 255.255.255.224
    ip address inside 172.20.8.1 255.255.255.0
    ip address DMZ 192.168.10.1 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    ip local pool ctpool 192.168.220.100-192.168.220.200
    ip local pool ct-thomson-pool-201 192.168.220.201 mask 255.255.255.255
    pdm history enable
    arp timeout 14400
    global (outside) 1 24.38.31.81
    nat (inside) 0 access-list nat0
    nat (inside) 1 CT-NET 255.255.0.0 2000 10
    nat (DMZ) 0 access-list nat0-dmz
    static (inside,DMZ) CT-NET CT-NET netmask 255.255.0.0 0 0
    static (inside,outside) 24.38.31.69 172.20.8.2 netmask 255.255.255.255 0 0
    static (DMZ,outside) 24.38.31.94 192.168.10.141 netmask 255.255.255.255 0 0
    static (inside,outside) 24.38.31.71 172.20.1.11 dns netmask 255.255.255.255 0 0
    static (DMZ,outside) 24.38.31.93 192.168.10.140 netmask 255.255.255.255 0 0
    static (DMZ,inside) 24.38.31.93 access-list static-dmz-to-ct-1 0 0
    static (DMZ,inside) 24.38.31.94 access-list static-dmz-to-ct-2 0 0
    static (inside,outside) 24.38.31.92 172.20.1.56 netmask 255.255.255.255 0 0
    static (DMZ,outside) 24.38.31.91 192.168.10.138 netmask 255.255.255.255 0 0
    static (DMZ,outside) 24.38.31.90 192.168.10.139 netmask 255.255.255.255 0 0
    static (inside,outside) 24.38.31.72 172.20.1.20 netmask 255.255.255.255 0 0
    static (inside,outside) 24.38.31.73 172.20.1.21 netmask 255.255.255.255 0 0
    static (inside,outside) 24.38.31.70 172.20.1.91 netmask 255.255.255.255 0 0
    static (DMZ,outside) 24.38.31.88 192.168.10.136 netmask 255.255.255.255 0 0
    static (DMZ,outside) 24.38.31.89 192.168.10.137 netmask 255.255.255.255 0 0
    static (inside,outside) 24.38.31.74 172.20.1.18 netmask 255.255.255.255 0 0
    static (inside,outside) 24.38.31.75 172.20.1.92 netmask 255.255.255.255 0 0
    access-group out1 in interface outside
    access-group dmz1 in interface DMZ
    route outside 0.0.0.0 0.0.0.0 24.38.31.65 1
    route inside 10.10.2.2 255.255.255.255 172.20.8.2 1
    route inside CT-NET 255.255.248.0 172.20.8.2 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server TACACS+ max-failed-attempts 3
    aaa-server TACACS+ deadtime 10
    aaa-server RADIUS protocol radius
    aaa-server RADIUS max-failed-attempts 3
    aaa-server RADIUS deadtime 10
    aaa-server LOCAL protocol local
    aaa-server ct-rad protocol radius
    aaa-server ct-rad max-failed-attempts 2
    aaa-server ct-rad deadtime 10
    aaa-server ct-rad (inside) host 172.20.1.22 morrow123 timeout 7
    aaa authentication ssh console LOCAL
    aaa authentication http console LOCAL
    aaa authentication serial console LOCAL
    aaa authentication telnet console LOCAL
    http server enable
    http 173.220.252.56 255.255.255.248 outside
    http 65.51.181.80 255.255.255.248 outside
    http 208.65.108.176 255.255.255.240 outside
    http CT-NET 255.255.0.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server community m0rroW(0
    no snmp-server enable traps
    floodguard enable
    sysopt connection permit-ipsec
    sysopt connection permit-pptp
    crypto ipsec transform-set 3des-sha esp-3des esp-sha-hmac
    crypto ipsec transform-set 3des-md5 esp-3des esp-md5-hmac
    crypto dynamic-map dyn_map 20 match address vpn-dyn-match
    crypto dynamic-map dyn_map 20 set transform-set 3des-sha
    crypto map ct-crypto 10 ipsec-isakmp
    crypto map ct-crypto 10 match address vpn-ct-li-gre
    crypto map ct-crypto 10 set peer LI-PIX
    crypto map ct-crypto 10 set transform-set 3des-sha
    crypto map ct-crypto 15 ipsec-isakmp
    crypto map ct-crypto 15 match address vpn-ct-li
    crypto map ct-crypto 15 set peer LI-PIX
    crypto map ct-crypto 15 set transform-set 3des-sha
    crypto map ct-crypto 20 ipsec-isakmp
    crypto map ct-crypto 20 match address vpn-ct-ny
    crypto map ct-crypto 20 set peer NY-PIX
    crypto map ct-crypto 20 set transform-set 3des-sha
    crypto map ct-crypto 30 ipsec-isakmp
    crypto map ct-crypto 30 match address vpn-ct-tx
    crypto map ct-crypto 30 set peer TX-PIX
    crypto map ct-crypto 30 set transform-set 3des-sha
    crypto map ct-crypto 65535 ipsec-isakmp dynamic dyn_map
    crypto map ct-crypto client authentication ct-rad
    crypto map ct-crypto interface outside
    isakmp enable outside
    isakmp key ******** address LI-PIX netmask 255.255.255.255 no-xauth no-config-mo
    de
    isakmp key ******** address 216.138.83.138 netmask 255.255.255.255 no-xauth no-c
    onfig-mode
    isakmp key ******** address NY-PIX netmask 255.255.255.255 no-xauth no-config-mo
    de
    isakmp key ******** address TX-PIX netmask 255.255.255.255 no-xauth no-config-mo
    de
    isakmp identity address
    isakmp nat-traversal 20
    isakmp policy 10 authentication pre-share
    isakmp policy 10 encryption 3des
    isakmp policy 10 hash sha
    isakmp policy 10 group 2
    isakmp policy 10 lifetime 86400
    isakmp policy 20 authentication pre-share
    isakmp policy 20 encryption 3des
    isakmp policy 20 hash md5
    isakmp policy 20 group 2
    isakmp policy 20 lifetime 86400
    isakmp policy 30 authentication pre-share
    isakmp policy 30 encryption 3des
    isakmp policy 30 hash md5
    isakmp policy 30 group 1
    isakmp policy 30 lifetime 86400
    vpngroup remotectusers address-pool ctpool
    vpngroup remotectusers dns-server 172.20.1.5
    vpngroup remotectusers wins-server 172.20.1.5
    vpngroup remotectusers default-domain morrowny.com

    Amit,
    I applaud your creativity in seeking to solve your problem, however, this sounds like a real mess in the making. There are two things I don't like about your approach. One, cron -> calling Java -> calling PHP -> accessing database, it's just too many layers, in my opinion, where things can go wrong. Two it seems to me that you are exposing data one your website (with the PHP) that you may not want expose and this is an important consideration when you are dealing with emails and privacy and so on.
    I think the path of least resistance would be to get a new user account added to the MySQL database that you can access remotely with your Java program. This account can be locked down for read only access and be locked down to the specific IP or IP range that your Java program will be connecting from.
    Again I applaud your creativity but truly this seems like a hack because of the complexity and security concerns you are introducing and I think is a path to the land of trouble. Hopefully you will be able to get a remote account set up.

  • MSI GeForce 8800 Ultra OC Lock / Freeze ups

    Hi, this seems to be a general problem not just with MSI, I'm reading exactly the same problems being experienced by other 'Ultra' users.
    After 20 or so mins of play (mainly bf2 / COH / Far Cry for me) the card/display driver crashes, the screen flickers and sound pulses then ultimately Windows (XP) locks-up/BSOD's.
    If I ctrl-tab quick enough I can go back into Windows and 2d is fine. If I then try and reload a game or any 3d app, it will immediately hang again, ie the only way to recover is to reboot.
    The GPU temperature reported is fine around 80 degrees at time of crash.
    However, I can run 3dmark2006 to my hearts content with no issue and the same with FSX.
    I tried lots of different things, endless driver revisions (yes use Driver Cleaner 1st), re-installing games etc to no avail.
    Increasing the GPU fan to 100% with Riva-Tuner has no effect but removing the side panel of my computer does result in no problem (strange eh).
    Now from what I have read, it is a problem with the memory being overclocked too much at factory.
    So as recommended by a poster to another thread, I reduced the factory 2300mhz memory speed down to 2200mhz and now I am running fine.
    I have a large Thermaltake case with 4 system fans so cooling is not an issue. Having said that, even if I had no fans the card should still not crash as the product does not specify any special cooling requirements.
    Has anyone else with this card experienced the same problem? Is it a driver issue, or a problem with this card that is known about by MSI? Or is the card faulty, should I send it back?
    I reported the problem to my reseller after 1 day and they told me they would need the card for 7 days and send it back to MSI if they couldn't find a fault. I am not prepared to do that and if it is not fit for my purposes, shouldn't they offer me an instant refund even if they test it and it works for them. I know for a fact they won't pay someone to sit there playing bf2 for half and hour lol, they will more likely run 3dmark and then tell me card is fine, when it isn't (for me)!
    Here are links to other people with similar issues:
    http://forums.hexus.net/showthread.php?t=111126&page=1
    http://forums.nvidia.com/index.php?act=ST&f=26&t=36798&st=0#entry221554
    http://forums.hexus.net/showthread.php?t=110912
    Thanks in advance for any words of wisdom.
    Thermaltake Kandalf
    MSI 8800 Ultra OC Edition
    Enermax 620w Liberty
    WD Raptor 10k 150gb / Hitachi 500gb
    DVD Re-Writer
    Abit Fatal1ty Sli
    AMD 4200x2 (2200) + Freezer Pro
    2x2gb OCZ DDR500 Platinum Edition
    xfi eXtremeMusic
    30" Dell LCD

    OMG THIS IS EXACTLY THE PROBLEM I HAVE!! 
    Ok sorry for caps. I have the exact same specs as elmes. I even had the exact same card as him previously x1900xtx from powercolor and it was rock solid for 1.5 years. I got the first MSI 8800 Ultra a couple of weeks ago and I launched EQ2 and lo and behold everything's great until I start seeing a weird black line flash in the middle of the screen every 20-30 seconds. Having had experience with problems like these I knew it was overheating or bad memory on the GPU or so I thought at the time. I have a ThermalTake Armor case with an 80mm fan custom mounted on the side blowing directly at the mobo and CPU, a Zalman 9500 on the CPU blasting the hot air across the case into the back exhaust 80mm, i've got a 40mm at the top of the case blowing the air out, 2 80mm front mounted blowing in and an extra exhaust 40mm in the back and the 80mm fan that comes side mounted on my OCZ GameXStream 700W PSU. So as you can tell the power and cooling is not a problem. Card runs 60c idle and max of 85c during ati tool artifact scan for 5 hours. (bosskiller could you please explain what combined PSU mode is exactly? i've never heard of that either, i have 2 PCI-E cables securely connected to the GPU).
    So I launched CoH and same black lines, only worse.  I then went on and downclocked the card to 635/2200 and surely enough all problems went away as far as the black line was concerned. So after poking around the net and ripping out a few hairs on my head for paying so much money for a buggy GPU, i decided to RMA it through Newegg. At the time I thought that maybe the box got damaged being shipped from CA to MA or I just got a bad card...
    So I got a brand new 8800 last night, overnighted from NJ in fact. Box in perfect condition and everything inside....
    I launch EQ2.....play for 30 minutes....no black lines...........WOW......n4_disp crash to desktop 5 min later..............
    So sure enough I thought ok, don't panic....bad drivers.....uninstalled all of my nvidia drivers (I have an MSI P6N Diamond mobo too btw, had severe problems with software raid, SiL's running well now) and 162.18 release drivers....installed 158.22....same problem.
    In an hour, the card started crashing in EQ2 every 5-10 minutes (and this was also at a particularly bad time as I was getting mauled by a lvl 57 epic djinn Al'zheri)....no black lines this time. So off I went and clocked it down to 635/2200 as I had the previous card, all problems vanished. Ran ATI tool artifact scan for overnight....all stable. Played EQ2 for an hour and a half this morning....all stable....
    So now I'm certain that MSI 8800 Ultra is clocked too high. In fact go and take a look at the OC settings of other VGA manufacturers, MSI is the highest with the exception of XFX.
    So either the QA team at MSI didn't do a proper job or 2 cards shipped from different locations with a 2 week delay in between happened to magically be bad. I'm gonna call Newegg today and see if I can exchange it for another brand.....
    PC specs:
    MSI NX8800Ultra-T2D768E-HD-OC GeForce 8800Ultra 768MB
    MSI P6N Diamond LGA 775 NVIDIA nForce 680i SLI
    Intel Core 2 Duo E6700 Conroe 2.66GHz LGA 775 (running at stock speed)
    G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
    OCZ GameXStream OCZ700GXSSLI ATX12V 700W
    Seagate 320GBx2 RAID-0 HD on SiL

  • System lock ups when using hard disks

    At first I thought I had the same issue as in this thread however after reading his logs I decided that it is unlikely since the topic opener seems to be getting a bunch of
    Apr 4 17:00:15 daxteriv slim[708]: (Do:882): GLib-CRITICAL **: Source ID 46 was not found when attempting to remove it
    , so I decided to start a new thread.
    I am not getting anything in my logs when I look at them after the crashes. It seems as if whatever is causing the issue makes it impossible to write to the drives so nothing seems out of place until after it's too late, and quite obvious that something is wrong. The sole exception to this was some complaint about ata9.00, however this seems to have been a red haring since the complete removal of this drive solved nothing, though it did make the error go away.
    I have run memtest, and prime95 (in windows since at the time I didn't want to boot my system) both coming back negative. I also checked for SMART errors, particularly UDMA errors. Again, negative.
    Here are some previous threads of mine that I believe to be all related to the same issue:
    https://bbs.archlinux.org/viewtopic.php?id=195449
    https://bbs.archlinux.org/viewtopic.php?id=193937
    https://bbs.archlinux.org/viewtopic.php?id=192704
    [edit3] My previous thought was that this was a btrfs issue, however now I think it may be more hardware related.[/edit3]
    Last night I was writing urandom to a new drive and I woke up in the morning to see that it had stopped prematurely, but not due to lack of space. The system had not locked up completely, which was new, however, as soon as I did something that accessed the disks (tried using the Gnome Dash), all hell broke loose. I immediately hit the power button, which would start a shutdown. I didn't know about REISUB, or I would have tried that. In anycase the shutdown failed and I had to hard reboot.
    The evening before I was playing games just fine and doing normal activities.
    Also, the other day, while booted into the live cd I think it started to crash since it was acting extremely bizarre, but I shutdown, successfully, before it could do more than complain a lot. At the time I was in the middle of scrubbing a btrfs volume after a system lock up. I think, but am not certain, that I saw on my motherboard "A5" which, according to the manual indicates "SCSI reset", but I had an extremely bad viewing angle. I know neither if what I think I saw was correct, nor do I know if the system was again in the process of a meltdown.
    In general there is no activity that seems to be able to instantly trigger this, though in each case, if my memory serves me well, there was a constant stream of data either to or from a HDD.
    My set up is that I have 5 HDDs, and an SSD. One HDD has Windows, my fallback installation of Arch, and daily backups. Another drive, which I just installed a few days ago currently only has single 50GB btrfs partition that is not part of any sort of larger volume. I also have three other drives each with four parttitions each involved in a btrfs volume. At the top is a 175 GB volume in a RAID0 configuration,  after that is a 25GB partiton in RAID1, then a 650GB partion (RAID1), and the remainder of the disk (about 80GB) is in single. The RAID0 is has games on it and sometimes for short term storage (a few hours), the 25GBx3 RAID1 is used for Arch as well my ~/.local, ~/.cache, ~/.thunderbird, ~/.mozilla, and ~/.config. The 50GB partition I mentioned is currently doing the job of this volume, and was not mounted last night, but has been before. The 650GBx3 is used for long term storage of just about everything, in particular ~ is mounted here. The single configured volume is used for downloads, storing ISOs and installers. The SSD is used for caching those partitions used in the RAID0 volume with bcache. I DO NOT think this is a bcache issue since the RAID0 volume has never had any errors.
    My motherboard is a ASUS X79-DELUXE which has the SATA controllers: Intel X79 Express Chipset, Marvell 9230, ASMedia 1061.
    [edit] Oh, I'm on kernel 3.19.2 and btrfs is 3.19.
    [edit2] Also, I converted the RAID0 to a single in case that matters.
    [edit4] I finished scrubbing and copied my "journalctl -b" output to pastebin. I can't see any thing that might raise any flags. http://pastebin.com/WXpbpTuc
    Last edited by nstgc (2015-04-05 16:46:00)

    nstgc : it's hard to tell if your problems are memory related, but memtst often needs multiple passes to detect errors.
    How many passes did you let it make ?
    Is it possible for you to take out say half of the memory chips and see if that changes anything ?
    Last edited by Lone_Wolf (2015-05-22 18:27:04)

  • [SOLVED] GX600 Locking up and freezing

    hey guys, I am new to MSI, I admittedly have been more of an ASUS fan of laptops, but received a new GX600 last week, and I have been having issues.
    I ordered the laptop with a 1gb ram upgrade, and the seller gave me a shocking 1gb micron technologies stick, that was constantly locking up my system - so i removed it, and the system since has not shown the same symptoms (freezing, becoming unresponsive)
    My new issue is a strange one, and I have been looking around the forum, and havn't found anyone else with an issue the same as it.
    Every few hours or so, The screen will go black, and the unit will become unresponsive. It needs power to be cut for it to turn off, allowing me to turn it back on. Sometimes the unit will just restart.
    This is a fresh install and update of vista, and I had a feeling it was the ram that was the issue. Running Memtest, the screen would just stay on this:
    http://img337.imageshack.us/img337/2445/20082008zx9.jpg
    Is anyone else having similar issues with an MSI notebook? the issue is frustrating!
    E: I am running the most recent BIOS.

    Quote from: http://support.msicomputer.co.uk/index.php?_m=knowledgebase&_a=printable&kbarticleid=29
    First of all don't panic! It can be just a protective mode* which all our notebooks have implemented. To check if it's a fault or is it just the protective mode that has been triggered please:
    - take the battery out. It's that black long part at the back end of the notebook. There will be 2 latches holding it. You need to slide them to unlock the battery and then slide the battery outwards.
    - unplug the mains from the notebook.
    - leave the unit unplugged from the mains and battery for 2 sec.
    - plug back just the battery
    - power on your notebook.
    If it was just our protective mode triggered then the unit will power and work as per normal. You can then plug the battery anytime.
    If the unit will still wont display anything then call the notebook hot line or create a ticket and we will assist.
    *the protective mode is there to prevent hardware damages to the unit when charges to it or it's settings have been made. Such mode can be triggered by a improper installation/shutdown, power cut, power voltage jump etc. In such event the unit does not power on fully to protect itself; the screen stays black although some lights on the unit will light up. Discharging the unit completely will reset the settings and any minor power management issues.
    UPDATE
    The unit just suffered another Black screen, and would only boot into this black screen, until i removed the battery for a few minutes (again :S). any ideas?

  • Z68A-GD65-G3 SLI black screen lock ups

    Let me start off by saying I have tried everything and I motivate everyone to prove me wrong and provide me with a solution to this issue.
    System spex:
    MSI z68A GD65 G3 
    2600k
    Corsair XMS3 1600 16GB
    Corsair AX1200
    2 - EVGA GTX 580 3GB SLI
    Running beta bios: E7681IMS.N49 from -> https://forum-en.msi.com/index.php?topic=151148.msg1144560#msg1144560
    I have tried almost every BIOS under the sun, including "standard bios" ie flash back to factory BIOS
    So here is the issue:
    In order to run SLi I have to be at completely stock settings, if I even up the multiplier to x35 on my CPU I black screen as soon as I bench/game on the cards. If I bench only the CPU (prime95) it is fine and no issues. but again as soon as I loud up something graphics wise the screen goes black and locks up.
    It isn't the cards either, each card has been tested on its own and in different PCs in SLi.
    It is like the motherboard cant handle the power??????
    Someone else has to be overclocking and running two power house cards like this without issues? right?  what did they do different? what settings? am I missing something?
    Or do I need to contact MSI and get a RMA in process.
    Before adding the extra card I had my CPU @ 4.7Ghz and when I would bench it I would take it to 5Ghz+ without a issue... solid, never had a BSOD. but this extra card just kills the systems.
    Again everything set to stock and the system runs great I can game on it for hours without issues.
    Thanks
    Nick

    Quote from: Bernhard on 30-December-11, 00:22:38
    I am not running your PSU down, don't get me wrong. You have the best PSU by general consensus. All I am suggesting is to check it in another system under similar OC conditions with approx the same specs.
    It does fine with SLI non OC, yet when you add the extra load of OC, and that can be an additonal 50 to 100W, then the PC becomes problematic.
    It could be something else, but one has to start eliminating potential culprits.
    Edit: Did you install Virtu ? If so, have you tried deleting it again for a test ?
    Oh I understand completely and thank you for your suggestion and time, it helps me to believe that it could be my PSU even more, I am borrowing a PSU from a friend and a PSU tester from work and tonight will get a chance to do some full testing on the PSU.
    If that tests out ok I will pull my PSU out and RMA it. hopefully Corsair will have a quick turn around.
    Virtu isn't installed, I will double check but it was disabled in BIOS, but i have reset my BIOS so many times I will make sure it still is.
    I will report back with my findings.

Maybe you are looking for