Locking a block after X number of user entry records

Is there a way to lock a block after X many records have been entered by the user? I dont have a problem after the
data is entered and saved, its just when they are entering the information the first time do I see the problem where the user can use the enter key and since my block navigation is next record they are able to go to the next record in block also that way. I have tried using triggers (when-validate-record it only catches it after they have already entered data, pre-record,next-record, does not seem to be able to see the :system.cursor_record variable. I need to be able to say, if the next record is X they can not navigate to that record. Any pointers in the right direction would be greatly appreciated.
--pnh

Use when-new-record-instance trigger, and check :System.trigger_record rather than :system.cursor_record for the record number.

Similar Messages

User exit after invoice number generation

Hello,
I need to fill the VBRK-XBLNR field with invoice number during creation of invoice.
Can any one tell me if there is any user exit available after the number generation.
Thank you!
Best regards
Sasi

Hi Sasidhar,
You can test whether the following Exit is applicable or not - using break-point --
Exit Name = V05N0001
Function Module = EXIT_SAPLV05I_004
Include = ZXV05U04
Kindly update us also.
Thanks.
Kumar Saurav.

When I try to edit preferences iTunes for Windows locks up. I have only one user. This is true even after a reboot.

When I try to edit preferences iTunes for Windows locks up. I have only one user. This is true even after a reboot.

Hello MF7642,
Thank you for contacting Apple Support Communities.
You can use this article to troubleshoot your issues with iTunes.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Regards,
Jeff D.

Users can't log in to server after X number of computers connect

I'm running a Leopard server with unlimited number of connections in a high school setting. It is set for an Open Directory master. After "X" number of students login, the students get a server error and no additional students can't login to their accounts. I logged into one of the student machines as admin and tried to connect to the server using the "Go-->Connect to Server" with their user ID and password. Here is the message that was returned:"This fileserver will not allow any additional users to log on. Please try to connect again later." Any ideas out there? Thanks for the look.

The next step is to open Console (or Terminal, or access the logs via ServerAdmin if you prefer) and look at the logs. I've never seen a similar issue, so I can't even begin to guess what's happening. AFP logs would be a good place to start, but poke around whatever other logs that may be relevant and see if there are any clues. I have seen Servers have issues with all connections, but never more than a certain number, and 8 makes no sense.
Can you elaborate any more on what your network looks like and how exactly your server is setup, and how you set it up?

The number of users on Mozilla's homepage is MISLEADING

Mozilla's homepage number of users is misleading, because it does not take into account the hundred or more EACH hour that are, in frustration, abandoning V4.1 and returning to 3.1.17.
So when is Team Firefox going to 'fess up and make an announcement that an entire rollback is needed, and Versions 4 need to go back to the shop for a rebuild?
I love Firefox and have used it since the very 1st one came out but the problems that I developed with 4.1 are reminiscent of the day of the Blue Screen of Death.

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
Create a new profile as a test to check if your current profile is causing the problems.
See:
* [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Temporarily blocking my CallerID Number - Doesn't work

I'm trying to figure out how to temporarily block my CallerID number, when I want to. On my old cell phone I could enter *67 before I dialed a number, and that would work. On my iPhone, the call can't be completed when I try entering *67.
I've also tried going to Settings -> Phone -> Show my Caller ID, and tried to turn that off, but it's dimmed, and I can't select it. I then called Apple and they said that I should be able to select it, but I haven't been able to do it on two different phones. I called AT&T, and they said that they can block it permanently, but that's the only option that they have.
Any ideas on how to block my ID? Is anyone able to get this to work?

Re: NEW iTunes Update Available
Posted: Aug 3, 2007 11:01 AM in response to: mikeab
Click to reply to this topic Reply email Email
Thanks for the tip on changing the user id. Called AT&T and they changed it in less than 5 minutes.
The guy who took the call said that it may take up to 72 hours to change and if it did not, I should call my regular land line provider.
When I queried him and said why contact my land line provider I only wanted my iPhone changed - he responded that when they change the caller ID it needs to change in the entire National Data Base, not just for my iPhone or any other cell phone but also my land lines as well. I have 3 land lines in the house and all 3 have now been changed to the new called ID as well after only asking that my iPhone caller ID be changed.
Interesting that there is a national ID data base on caller-id's. Hmmmm!!!

Pavilion Dv5-1009el - Black screen and blink caps lock and block scorr

Hi,
I just replaced the motherboard of my pavilion that reported an error as object. The purchased motherboard is new and hp original.
After having changed, I turn on the pc and work fine, i see the hp logo and enter to bios, after I turned off the pc without starting windows.
I inserted the battery and powered on the pc and returns to the old error, the LED of caps lock and block Lock blinks...
So I tried to update the bios from USB using winkey + B. The computer emits two beeps but does not read from any USB port and the LEDs go out for a while and then blink again.
What can I do?
Greetings,
Enzo.

Hi @shmurray,
Welcome to the HP Support Forums!
I understand you are getting a blink pattern on the Caps lock LED, when you turn on the notebook. I am happy to help you with this.
I am including the page on the error codes for your reference: Blank Screen LED Error Codes
From that document the pattern you are getting indicates a memory problem. You said that you have tested the memory. What exactly did you try?
The document suggests reseating the RAM or trying a new set of RAM and then restarting the notebook. If you are still getting a memory problem after trying both of those things, ie a 3 blink code again, then it would likely suggest that there is a problem with the motherboard itself, either with the memory slot or one of the controllers related to memory.
In that case I would suggest contacting the technical phone support number at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If however reseating the memory or replacing it leads to a different error code or message please let me know, Although in that case the following may be helpful if you still have a blank screen.
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
Here are some other sources I found that may be helpful to you.
Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
I hope that this is helpful to you.
Regards,
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Need to format a form field to add a "%" after the number

I am working on a form that will both print for manual fill-in and also electronic fill-in using reader. My issue is that I need to
add a "%" symbol after the number input by the user. I can't use the percentage format type because that places a 0.0% in the field
when no data is entered and I can't have that due to the need to be able to print a blank form for manual fill-in. Is there a simpl
e way to append the % character after the user input only if data is in fact input and to leave the field empty otherwise?

I assume you only want the user to input numbers and you've then set the format to number.
In the textfield properties go to the format tab and set it to custom.
Enter a custom keystroke script:
if(!event.willCommit)
var nChars = event.selEnd - event.selStart;
var aFull = event.value.split("");
aFull.splice(event.selStart, nChars, event.change);
var strFull = aFull.join("");
event.rc = !isNaN(strFull);
This will allow user to input numbers only - strings are regarded as user type.
Go to the validation tab and enter a custom validation script:
f = event.value;
if(f) {
event.value = f + " %";
If I understood your question correctly, that should do the trick.
Torben.

[database design] the "too many" number of users of one instance!!

Good morning everyone!!
I have a question about the number of users of one db
instance, "possible problems" caused by too many users,
and "pros and cons" of this case.
Now, the company I work for is considering centralizing
150 db servers of 150 sites. 150 chained-stores have
their own db instance.
Here is the structure of db instance after the
centralization.
1. Centralized instance has each user per site(150
sites), for example, site001, site002, …site00n, …
site150
2. Each user has its own 250 tables, thus the db
instance become to have 150 users and 150*250 tables.
3. Each user has almost the same table schema, not
exactly. There are a little bit of differences among
the business rules of each sites.
4. the version of centralized db instance is "oracle9i".
Theoretically, it seems like there is no problem, but I
have not experienced the db instance like this, which
has "too many" users of 150 users.
In terms of every aspect such as "performance/tuning",
"system management", or "something else", I would like
to hear what could be "the pros and cons" of this
structure.
Assuming that there are possible critical problems caused
by too many users, what could be the alternative choice?
I will be waiting to hear your experience. Every response
will be appreciated, even if it is not about what I asked.
Thanks for your interest in advance.
Have a nice day.
Ho from Japan

Have a look to following AskTom threads:
http://asktom.oracle.com/pls/ask/f?p=4950:8:4685256847630125933::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:31263903816550
http://asktom.oracle.com/pls/ask/f?p=4950:8:4685256847630125933::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:63447102315094

OIM 11g - User Not enabled After the job "enable user after start date"

Hi,
I have a future hired user in OIM whose start date is set in OIM. The status of the user in OIM is 'Disabled Until Start Date'.
After the start date has passed and the scheduled job 'enable user after start date' is run, I see that the user is still in the status 'Disabled Until Start Date'. I re-run the scheduled job 'enable user after start date', this time manually, still the state of the user remains unchanged.
Please help in troubleshooting as to find out the root cause of the issue and a workaround/solution, if possible.
This issue is intermittent and has happened with quite a number of user. Any pointer would be helpful.
Regards,
Sudipto S.

I agree with Nayan.
One alternative approach can be to write your own custom scheduler which can overcome the limitation of OOTB scheduled job 'enable user after start date'. Let the OOTB job get executed first. After it, your custom scheduler should fire a simple SQL Query:
SELECT USR_KEY, USR_STATUS FROM USR WHERE (USR_START_DATE > SYSDATE -1) AND USR_STATUS='Disabled Until Start Date';
//Means those users who are supposed to get enabled today and are still not yet enabled and are in 'Disabled Until Start Date'. May be 2-3 user keys at max will come...
As you said it happens only intermittently and not for all users... So, let the OOTB scheduled job take care of most of such users... And after it has finished, if any user still remains in 'Disabled Until Start Date', your custom scheduler should enable it via using tcUserOperationsIntf.enableUser(userKey);
Using API is always better than database update... Because APIs trigger downstream provisioning workflows as well and not just updates OIM Database...
Keeping your constraints in mind, I think it is the correct answer.

How do I block my phone number on the iphone 5c

How do I block my phone number from being displayed on the caller id on the iphone 5c

This is covrerd in the iPhone user guide:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Total number of users in NetPoint License has been exceeded

I am keep getting this msg on my website.
I goto admin > business partner > license users and delete all users except manager the msg goes away and after few hours it comes back again
Total number of users in NetPoint License has been exceeded.
Some features may not function properly.
Please remove a user or upgrade your license.

Hi Ghanbary,
You may need to check the "Do not assign licensed user role to super users" option in the Synch Manager application.

Starting essbase failing with Fatal Error: Incorrect number of users found

In an OVM setup env on B16,
$ /u01/APPLTOP/instance/BIInstance/bin/opmnctl startall
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=adc2111145.us.oracle.com:10204
0 of 1 processes started.
ias-instance id=BIInstance
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
essbaseserver2/Essbase/AGENT/
Error
--> Process (index=1,uid=2129164304,pid=11188)
failed to start a managed process after the maximum retry limit
Log:
/u01/APPLTOP/instance/BIInstance/diagnostics/logs/Essbase/essbaseserver2/console~AGENT~1.log
And in log:
Fatal Error: Incorrect number of users found [2]

In an OVM setup env on B16,
$ /u01/APPLTOP/instance/BIInstance/bin/opmnctl startall
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=adc2111145.us.oracle.com:10204
0 of 1 processes started.
ias-instance id=BIInstance
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
essbaseserver2/Essbase/AGENT/
Error
--> Process (index=1,uid=2129164304,pid=11188)
failed to start a managed process after the maximum retry limit
Log:
/u01/APPLTOP/instance/BIInstance/diagnostics/logs/Essbase/essbaseserver2/console~AGENT~1.log
And in log:
Fatal Error: Incorrect number of users found [2]

Blocking a telephone number

I looked everywhere and could not find where you can block a telephone number. Is there anything available that allows you to do this? I've been getting telephone calls from this unknown person, even after I told them that they had the wrong number. In fact I told this person that twice, but still getting calls. Need some help.

Yes SPAM is the correct option and you can access it through account manager..... Another option that I use also is Call Blocker Gold off the Market, it allow you to block unknow contacts and any number from caller id or just enter info... You can Block by Hanging up on without ringing, send to voice mail and silence ringer. It has worked well for me.

I am considering installing the latest version of OS X Mountain Lion but am concerned by the number of users that have had severe problems. Has Apple sorted this out?

I am considering installing the latest version of OSX Mountain Lion but am concerned by the number of users that have had severe problems. Has Apple sorted this out?

As I told you, you have to do some steps before upgrading to OS X Mountain Lion.
First of all, make a backup of your files using Time Machine and/or Carbon Copy Cloner. If you make both, good, but if you only make one, it's OK, too.
OS X Lion and OS X Mountain Lion aren't compatible with PowerPC applications, so you have to check if your applications are compatible > http://www.roaringapps.com If you have to update an application, do it before upgrading, because the Mountain Lion installer moves unsupported applications to a separate folder.
After doing that, open Disk Utility, select "Macintosh HD" in the sidebar and repair permissions. Then, verify the disk to check if it's OK. If everything is right, just open the App Store and purchase OS X Mountain Lion

Locking a block after X number of user entry records

Similar Messages

Maybe you are looking for