Log for changes done before posting LIV in Tcode MIRO

Hi
By default data will be fetched from PO/GR for LIV however our users are changing few details such as payment terms, tax code, vendor code, vendor invoice amount etc., before posting LIV in tcode MIRO. We don't have any log for these changes done by our users.
We want to know what are fields which have been changed by our users at the time of doing LIV (i.e. before posting LIV).
Can any one help us in this regard.
Regards
P Karthikeyan

If you know those fields, you can find the differences for those field in table EKKO and EKPO for PO, the similar value will be available for IR in table RBKP and RSEG.
Like as payment term, The payment term is saved in table RBKP - ZTERM for MIRO.
The same will be available in table EKKO - ZTERM for PO.
If the value for both fields are same, then user has not changed the field at the time of MIRO.
If the value mismatched, then user has changes the value in MIRO.
In this way, you can find the differences for other fields.

Similar Messages

  • Error: while configuring logs for changes in infotype data

    Hi All,
    I am configuring the following Tables for maintain logs for changes in infotype data.
    V_T585A, V_T585B and V_T585C
    While configuring V_T585B, when i input * in 'field name' column it gives me an warning message " All data fields in **** infotype 31 will be deleted.
    Please let me know, what does this warning message means?
    Also, How is the report RPUAUD00 read?
    Regards
    Simran

    Hi Simran,
    you are not suppose to give the IT 0031-Reference Personnel Numbers in these tables. why because this will done at the time of Employee hiring only and we don't change this. if you change you will lost the old data in the IT.
    Normally we assign only the IT which we change frequently for the master data. example like 0 1 2 7 8 9 27 582 - 589 2001 2006.
    if you are configuring today means from today on-wards any changes had made to these IT's you can see in the report. before changes will not be seen. in the report you have to choose either long-term document / short-term document and remaining fields as per the requirement.
    Regards,
    Praneeth kumar

  • Log for changes

    Hi all,
    I'm in the need of log all the changes that have been done to a ztable. the log should be as fallow:
    username date/time field changed value and new value.
    How can I do that.
    your help will be appreciate it.
    Thanks in advanced,
    Fidel.

    Hi Fidel,
    I hope you must have found out the details as the post shows as solved. Just found this and thought you might be interested.
    <u><b> For a table to be logged, 2 requirements must be met:</b></u>
    1. In the technical settings of the table, checkbox "Log data changes" is marked.
                  You can go to the technical settings via Transaction SE13 or via the path "Tools --> ABAP Workbench --> Development --> Dictionary", enter the table name and click on "Change". On the next screen, click on "Technical settings" (CtrlShiftF9).
                  If you change the technical attributes of a table, make sure you save and also update these changes.
    1. Logging is also set in the system profile. To do this, set profile parameter rec/client (lower-case!) to one of the following values:
    OFF: Generally no recording (e.g. central system switch)
    nnn: Logging for client-specific tables only in client nnn
    mmm,nnn,ppp ...: Logging for client-specific tables in the clients listed (a maximum of ten).
    ALL: Logging always, for client-specific tables in all clients. Caution: This setting is sensible only in special cases. Note that with the "ALL" setting or when upgrading all test clients, (including SAP client 000) changes will be recorded in the log file.
                  The default settings is OFF - that means, no default logging takes place.
                  If rec/client is not OFF and logging is active in the dictionary, non-clientspecific tables are always logged. This setting is usually used in the period of the installation and test phase only.
                  Please make sure that the values for rec/client are the same on all servers of a system. Only then logging will work correctly.
                  With the production start, logging tables relevant to account reporting should be activated (obligation to prove due to national orderliness requirements)
    Hope this info is useful.
    Cheers
    VJ

  • Log for changes in the SAP table

    Hello All,
    I have a SAP table in which we want to log all the changes being made by the number of users like modifying some record or adding a new record.
    Now What I have done is in the SE11 under technical settings I have checked the checkbox which is "Log data changes", Needless to say I have the developer access key to the system.
    Now I want to test whether changes being made by me in the SAP table are logged somewhere or not I want to know where can we see the changes being logged made by me.
    Is there a tcode to see the changes being made in the table or a SAP table exists for this.
    Thanks,
    Mark

    Hi,
    BAL_OBJECT_SELECT --> To get the LOG for a object
    You can use below Tables/Structures
    DDPRT -->  Structure of ABAP/4 Dictionary logs
    DDPRTXT
    Regards
    Sudheer

  • Log for Change of Real-Time Load Behavior

    Hi experts,
    is there a log for the change of the real-time load behavior?
    I checked SLG1, but I did not find any object / subobject that seemed to be helpful.
    Angie

    Firstly,
    How are you changing the real-time load behavior, are you using any process chain variant,in that case you can look at the process chain log..

  • BAPI/FM for change Material Document Posting date

    Hi Experts,
    Is there any BAPI/FM for change a material document posting date.
    Its urgnt.

    Hi You can check the source code of MB02.
    i doubt whether you can change the date , hope so you have to reverse the document asd post it again.
    check & use MB_CHANGE_DOCUMENT at your own risk.

  • Logging for changing device configuration using cisco prime LMS / PI

    Dear All,
    How to see / set for
    for changing device configuration (routers, switches) using cisco prime LMS / PI ?
    and, how to see network topology diagram using PI / LMS?
    Thanks,
    Jerri

    anyone can help. thanks.

  • Any Standard FM  for material stocks on posting date  using  Tcode  MB5B

    Hi,
    I  need   Standard  FM  to get  material stocks on posting date  using   Tcode   :   MB5B
    Stock type  i am using  is  : Storage Location/Batch Stock
    the  Input   i am  providing  is    Material, Plant , Storage Location, selection  date From , selecDate To.
    Then   i need  to get  data  that it  provides   header  and  document  item level.
    Can u please tel me  how do i get  that  material stock data  on posting date and in which tables
    it will be populated in the database.
    ITs required  can u take view and post info
    Thanks & Regards
    sivakumar kasa
    Edited by: siva kumar kasa on Dec 21, 2010 2:30 PM
    Edited by: siva kumar kasa on Dec 22, 2010 7:15 AM

    hi Rehan,
    I have checked all settings also enhancement  but there is no as such control to restrict backposting within current period
    I think its self disipline action not to post backdated GI when GR is done on later date
    Vishal...

  • How to find out the changes made during posting the invoice in MIRO

    Hi Friends,
    During posting an invoice in MIRO somebody changed the invoicing party which differs from the vendor which was in PO. Is there any way out to see the record of changes, like who has changed & at what time.
    Replies will be highly appreciated.
    Regards
    Rutabhadra Panda

    Hi Rutabhadra
    you can see the Document change in the Table CDHDR
    t code : SE 16
    table CDHDR
    object : IncomingInvoice
    execute this
    see the change time and name
    Regards
    Vikrant

  • Looking for Exit or BTE or Badi for Changing amount to posted in F-53

    Dear Guru's
    I am Looking for Exit or Badi or BTE for F-53  Where I can Change The Amount while clearing the vendor payemnt because My Client Bussiness process is to Cut bank commission on the amount to be posted while making the  payment .
    Or is there any way Out to meet this requirements.
    Thanks and Please do Reply...
    Nilesh

    Is it solved ? How ???
    Glauco

  • Shopping Cart workflow retrigger for changes done to SC already created

    Hi all,
    A shopping cart is created and later on in "Check Status" when the shopping cart is opened in change mode and any changes are made to the shopping cart either header or item level, the whole approval workflow is retriggered and the approvers are determined again.
    We have a scenario where for a particular account assignment category the approvers are added manually - ad hoc approvers through the "Add Approver" in "Approval Preview". For these shopping carts with manual approvers when in "Check Status" any changes are done to header or items of the shopping cart, the whole approval workflow is retriggered and the manual approvers previously added are refreshed as per standard SAP.
    I have to put a check in DOC_CHECK badi for the existence of approvers. If no approvers found an error message has to be thrown for adding the approvers manually. I am doing this by reading the approvers from the container for a cart created already. But when changes are made and the workflow is retriggered, the workflow container contains only the previous approvers and not the refreshed ones. So this is not captured in DOC_CHECK badi.
    Is there any way to capture the retriggering of workflow in DOC_CHECK badi, so that the check for approvers works fine even after a change being done to a shopping cart which is already created.
    Thanks and Regards,
    Asha

    Try this FM BBP_PDH_WFL_APPROVAL_SIMULATE
    Regards, IA

  • Table for Changes done to Vendor Bank Details

    Hei ,
         Please let me know the table which stores the old data when the Bank Key Or a Bank Account is changed for a particular Vendor.
    Thanks .
    Best Regards 
    om prakash ..

    Hi,
    I agree with Krishna K that you will get changed data in tables CDPOS and CDHDR.
    Please note that data flows into these tables only when change management is made active else you can use standard SAP transaction codes FI04 - Display Changes  and S_P00_07000008 - Display of Bank Changes to see the changes made.
    Regards,
    Tejas

  • How to Find Vendor for the material  before posting  a PO

    Hi,
    I am using BAPI_PO_CREATE1 to post a PO(ME21N), in the order to fill header data I need to give Vendor information. I have filled that data with one ZTable and executed. When i executed the BAPI, it gave me result as "VENDOR is declared as some thing else for the material". Now my Query is how to know the vendor the particular material.
    Even MSEG is showing no vendor.

    Hello Krishna,
    I do not think there's any direct assignment between a material and a vendor. And I would be surprised if there's one. Let's say there are 4000 materials and 600 vendors in an R/3 System. Doesn't it sound needless to maintain for each material all the vendors ?
    Just go to the Purchasing tab for a material (MM03) and also refer to the Purchasing data for a Vendor (XK03). you will see that there's something called a <i>Purchasing Group</i>, which is common to them both. Now just read the F1 help for this field.
    Regards,
    Anand Mandalika.

  • Log for changes to default layout profile

    Hi,
    Are changes to the following logged anywhere:
    a) Default layout profiles.
    b) collection renders.
    c) laout sets.
    Thanks
    Nikhil

    HI Nikhil ,
    I guess only last modified can be viewed ? dont know need to find out on this and will update you accordingly.
    Thanx
    Pankaj

  • Exit or Enchancement for changing amount in vendor line item in MIRO

    Dear All,
    I want to change the amount in vendor line item which get posted through MIRO.System generated 2 line item in case of payment terms of retention is used.
    Requirement is that, in one line item of vendor, amount should get changed based on the logic and adjust the amount in other line item of vendor.
    Request to please let me know, Where in Exit/ Badi or enhancement spot, we can write our coding, so that it should update the amount with new value at the time of posting the document.
    Thanks & Regards,
    Abhinav Jain

    Hi,
    Try with Badi   ACC_DOCUMENT
    Regards,
    Azeem

Maybe you are looking for

  • Linking to specific cells in an Excel spreadsheet no longer working

    I use RoboHelp HTML version 7 and just upgraded to MS Office 2007.  I have project that contains hyperlinks to specific cells in an Excel spreadsheet using the following syntax: <a HREF="../file_name.xls#cell_name">  (a tip I found on Peter Grainge's

  • Interactive report gives an error only for a specific user

    An interactive report based on a very complicated select gives an error only when a specific user is logged on. The error is: ORA-00932: inconsistent datatypes: expected - got CLOB. For other users logging using this page it works fine. Authenticatio

  • Substitution rules . not working

    Hi I add a step in existing substitution. throgh GGB1.  ( Cost accounting > Item Line ) . when i checked throgh  FB60 or FB01. Cost center is not substituted. Prerequsiti >>     COBL-AUFNR = 'FDX-5031' Field                  is substituted by: Cost C

  • Protected PDF files

    My Adobe Reader no longer opens my protected PDF files with my password.  Why is this happening, and how do I fix this?

  • T-code CO01 to create Production order:error message "No routing found"?

    I use t-code CO01 to create Production order.At the first screen I select material 72 and plant HJW1 .At the Header creen,I input the data in the General tab and press return but the sap show the error message "No routing found".But I have create the