Log in window re-appears over and over.
I try to log in, top tool bar begins to load, then screen turns blue and log in window appears again and again and again...Deja Vu. Ideas? Thanks!
Try starting up in Safe Mode.
For more info:
http://support.apple.com/kb/HT1564
Similar Messages
-
Essential event viewer bugs with "Forwarded Events" log in Windows Server 2008 R2 and Windows 7
To my general experience, Windows event viewer is one of the most problematic, faulty management tools in the case of extensive use of its more sophisticated capabilities. The sole description as well as reproduction of some entangled failures would require
remarkable effort.
With the "Forwarded Events" log however, the situation becomes particularly worse in that even simple functionality fails and workarounds are difficult to find. That’s what I’ll describe here in order to share my experience with interested users.
For precision: I’ve extensively used event viewer on a German Windows Server 2008 R2 SP1 (Windows SBS 2011 Standard SP1). The bugs I found on that system, I could reproduce on a German Windows 7 Professional 64-Bit SP1, too.
Problem 1: Failure of even simple event filtering
To reproduce this problem, execute these steps on a test machine with any of the two OS mentioned above:
(i) To prepare log contents, do either of the following:
(a) populate some events to your local "Forwarded Events" log (most simply by subscribing events from other logs of the same machine; stop subscription if you have collected some events)
Or
(b) copy a non-empty log file "ForwardedEvents.evtx" from another machine (with any of the two OS mentioned above) to your test machine and open the file in event viewer.
(ii) Navigate to your "Forwarded Events" test log and open the filtering dialog. In the "Includes/Excludes Event IDs" field, type: 1-9000. Click OK.
(iii) Look at the results pane: Surprise, 0 Events! Do you really have no event IDs between 1 and 9000 in your test log?
(iv) Another example, if you have forwarded security events in your test log: Clear filter, if any previous filter is in place. Open the filtering dialog. In "Keywords" sub-dialog, choose "Audit Success". Click OK.
(v) Look at the results pane: Surprise, 0 Events! Do you really have no successful security monitoring events in your test log?
I’ll finish here. If you have a rich variety of events in your test log available, let your imagination run wild to test around. Finally include some simple manually created or modified XPath filters on the XML tab of the filtering dialog. I promise, you’ll
find a lot of additional strange results.
Problem 2: Cannot save manually selected events to .evtx file
Navigate to your "Forwarded Events" test log. In the results pane, select one or more events by highlighting them by mouse clicks. In context menu, choose "Save selected events". In the "save as" dialog, choose file type *.evtx
and save your file. Open the newly created file in event viewer. Result: Surprise, no events inside the new file!
Have more fun with forwarded events
HelmutDid you mean that right click Forwarded Event and select "Filter Current Log..."? Since I can filter correct event vai the "Filter Current Log..." in my Lab environment.
Hi Justin,
yes, I mean "Filter Current Log ... " (in my German systems: "Aktuelles Protokoll filtern ... ").
What do you mean with "my Lab environment" exactly?
In the meantime, I performed additional tests. I copied the "ForwardedEvents.evtx" test file from Server 2008 R2 resp. Windows 7 to
(i) German Windows 8 Pro 64-Bit RTM
(ii) German Windows 8.1 Pro 64-Bit, up-to-date
in order to view and filter the file there.
Results: Same event viewer problem on Windows 8 RTM, but correct behavior on Windows 8.1!
Best regards, Helmut -
Analyze and Write a log of windows logon/shutdown script and policy
Good Morning,
Is there a way to write a complete log of pc from when it start to receive the domain policy for the machine and user and for the startup/shutdown process?
Thanks for you help.
Salento.Hi Salento,
Before going further, what do we want to do? Are we troubleshooting something?
If we want to troubleshoot group policy, we can collect group policy result to check if our policy settings get applied properly.
To collect group policy result:
1. On domain controller, click Start -> Run, type GPMC.MSC, it will load the GPMC console.
2. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select the proper
user in the wizard)
3. Right click the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
If we need more specific information for troubleshooting group policy, we can enable gpsvc logging for group policy processing.
To enable Gpsvc logging, the following blog can be referred to as reference.
Userenvlog for Windows Vista/2008/Win7
http://blogs.technet.com/b/mempson/archive/2010/01/10/userenvlog-for-windows-vista-2008-win7.aspx
In addition, regarding group policy debug log settings, the following article can be referred to for more information.
Group Policy Debug Log Settings
http://social.technet.microsoft.com/wiki/contents/articles/4506.group-policy-debug-log-settings.aspx
Best regards,
Frank Shen -
View logs in windows server (User login and logout )
Hi Guys,
I want to see the user login and logout times to the systems. I want know on which systems (Hostname) they logged into that account.
Could you please help me. Thanks in advanceHi
You can check the log's on event viewer console,here is good article for your needs,please check;
https://support.microsoft.com/en-us/kb/556015?wa=wsignin1.0 -
There´s a window that appears that says windows restoring and it goes on and on
THere´s a window taht appears on and on that says "restore windows" and two options, but nothing happens
Don't take this the wrong way but are you sure it isn't the cover of the last album that you played in the app? See if there is an arrow in the bottom right corner of the album art and if so, tap the arrow to go back to the main menu screen.
If that doesn't work, quite the app. Double tap the home button and your recent apps will appear in the task bat. find the iPod app icon and hold won on it until it wiggles. Then tap the minus sign in the corner of the icon. Tap the screen to return to the home screen. Now restart the iPad by holding down on the sleep button until the red slider appears and slide to turn off. Hold down on the sleep button until the Apple logo appears and then let go of the button and the iPad will restart.
With reference to my opening statement ....Don't take this the wrong way ... I read a post today where someone was trying to troubleshoot a sound problem on his iPad. One patient user posted back and forth with the OP and after about six posts both ways, it turned out that the OP had the volume turned all the way down on his iPad. He was totally unaware of the fact the iPad had a volume control. -
After upgrading to lion, shut down window is appearing continually
hi :
after i installed the lion osx upgrade, i had a problem , a big issue .
when i'm using the laptop , the shut down window is appearing continually. and after about 10 min the computer shutting down automatically .
i tried to reset the smc.
but the issue still there.
i changed the hard disk and install the snow leopard osx.
i checked it again ,,,,,, nothing is happening .
so what could be the issue .??
by the way i did all software update after i finished installing my software's.
regardsI have the same problem. I use the Windows 7 on bootcamp partition and there all good, but when I go to mac partition the shutdown menu appears when I stop using the keyboard or trackpad and after 10 seconds off.
-
what am i to do if my apple macbook air won`t let me log in? i enter the right password, but the log`in window appears over and over again, and won`t let me enter my account!!!
Try restting the password. Boot into Recovery (⌘R), in the Menu Bar, you'll see the option to reset password.
-
I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin. However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
When I move my curser over certain things I get this Message in a window that pops up and says "We noticed you may have signed in or signed out in another window click ok to reload your page." How do I get this to stop.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
You may have to create an Allow cookie exception for that server.
* Tools > Page Info > Permissions -
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
-
There is a bright flashing light over my tool bar and sometimes a flashing black box appears over the Yahoo news. I tried Reset Firefox and that didn't work. I then uninstalled and re-installed Firefox and I still have the seizure inducing flashing lights.
When I switch to Internet Explorer I do NOT have this problem. Please help me because I do not want to go back to IE.
ThanksIn case this is caused by Firefox 33 being incompatible with your graphics card/chipset driver software, could you test for a while in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions, hardware acceleration, and some other advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?
You can disable hardware acceleration for all modes in the Options dialog.
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
This takes effect the next time you exit Firefox and start it up again. -
But I can using Windows.
Lost over 8 hours today. Still not working
Even deleted itunes and reinstalled.
My Music files are still there. But itunes can not find them.Empty library or library full of broken links?
tt2 -
A new tab has suddenly appears over my home page when I go online. I don't know where this came from; is it a Mozilla Firefox thing? Even worse, when I try to print from internet, this page appears instead of my printer box and I am unable to print what I want.
You may have an unwanted extension that is modifying sites (or the toolbar area). Try this:
Disable ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that flush the tab?
Please report back on anything suspicious you find so others can learn about its bad behavior. -
Opening FF for the first time and when any additional, new window is opened, it takes over 60 seconds for the window to appear. This happens after reboot and repair permissions in Disc Utilities on reboot (from installation disc). Once window appears, all works fine. New tabs appear instantly. New, added windows still take the 60+ seconds to appear even with current window remaining open. No other browsers or applications behave this way.
Not sure if this is exactly the same as the other reported problems.
But creating a new (via command N or via menu selection) window creates a long thin nearly zero width but full height window. Selecting the window via the window menu and zooming brings it up at full size.
I tried turning off all add-ons and things seemed to work but then stopped working again (sorry can't find a consistent set of symptoms here).
MacOSX 10.6.8 Firefox 6.0.2 -
Need to send a mail when job window time is over
Hi ,
select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
========
I have created a job using dbms_scheduler.create_job with a 1 hour window ( created using dbms_scheduler.create_window ) .
My job triggers a stored procedure . Now I have a send_mail code at the end of the stored procedure which sends a mail with plsql log as an attachment . When my job runs more than 1 hour the stored proc is getting stopped and not triggering the mail though I put the same code in exception block ( exception when others ) .
CREATE OR REPLACE PROCEDURE my_sp
AS
BEGIN
-- some code ---
begin
-- send mail --
end
EXCEPTION
WHEN OTHERS
THEN
send mail ( Can I get this piece when window time is over )
END;
Is there any other way I can run the last piece of the proc (send_mail) .
Thanks ,
MaheshMahesh wrote:
Folllowing below note .
http://download.oracle.com/docs/cd/E14072_01/server.112/e10595/scheduse008.htm
but need to attach a file .
SQL> desc utl_mail
PROCEDURE SEND
Argument Name Type In/Out Default?
SENDER VARCHAR2 IN
RECIPIENTS VARCHAR2 IN
CC VARCHAR2 IN DEFAULT
BCC VARCHAR2 IN DEFAULT
SUBJECT VARCHAR2 IN DEFAULT
MESSAGE VARCHAR2 IN DEFAULT
MIME_TYPE VARCHAR2 IN DEFAULT
PRIORITY BINARY_INTEGER IN DEFAULT
REPLYTO VARCHAR2 IN DEFAULT
PROCEDURE SEND_ATTACH_RAW
Argument Name Type In/Out Default?
SENDER VARCHAR2 IN
RECIPIENTS VARCHAR2 IN
CC VARCHAR2 IN DEFAULT
BCC VARCHAR2 IN DEFAULT
SUBJECT VARCHAR2 IN DEFAULT
MESSAGE VARCHAR2 IN DEFAULT
MIME_TYPE VARCHAR2 IN DEFAULT
PRIORITY BINARY_INTEGER IN DEFAULT
ATTACHMENT RAW IN
ATT_INLINE BOOLEAN IN DEFAULT
ATT_MIME_TYPE VARCHAR2 IN DEFAULT
ATT_FILENAME VARCHAR2 IN DEFAULT
REPLYTO VARCHAR2 IN DEFAULT
PROCEDURE SEND_ATTACH_VARCHAR2
Argument Name Type In/Out Default?
SENDER VARCHAR2 IN
RECIPIENTS VARCHAR2 IN
CC VARCHAR2 IN DEFAULT
BCC VARCHAR2 IN DEFAULT
SUBJECT VARCHAR2 IN DEFAULT
MESSAGE VARCHAR2 IN DEFAULT
MIME_TYPE VARCHAR2 IN DEFAULT
PRIORITY BINARY_INTEGER IN DEFAULT
ATTACHMENT VARCHAR2 IN
ATT_INLINE BOOLEAN IN DEFAULT
ATT_MIME_TYPE VARCHAR2 IN DEFAULT
ATT_FILENAME VARCHAR2 IN DEFAULT
REPLYTO VARCHAR2 IN DEFAULT
Maybe you are looking for
-
I have a brand new 3T external hard drive (the Lacie Porsche p9230.) I manually backed up several big files from my computer ok, but all attempts to do a time machine backup just stall, usually after only a few K are backed up. hours go by, no progr
-
ok people i installed the 7 itunes version for my30GB video pod but now that i connect my ipod it wont do anything it wont update the songs i have on the music library says do i want to instal the 1.2 software version to my ipod i said yes now it say
-
Cannot apply Direct Access Client GPO on Windows 8.1 Enterprise client
Hi, I have made a Direct Access environment on Windows Server 2012 R2 Essential. All setting seems to be ok, but i'm completely stuck when i have to export the DA client GPO to the client computer. The client computer is a Win8.1 Enterprise, already
-
Accessing Custom Security Realm and NotOwnerException.
I have installed the RDBMS example security realm, which appears to work fine. However when I attempt to access this realm from a Servlet via Realm.getRealm("name") I get an NotOwnerException being thrown. Ideas ? regards, Jeff.
-
My ipod was completely dead when i started charging it. once it turned on i could read the screen. by the time it was completely charged all i can see is shifting lines. can i fix it?