Log MAPI Properties

Hi,
I would like to monitor all MAPI Properties that are sent from an Outlook client during the sending process of an EMail.
Is there a way to configure Exchange's logging to meet such a requirement?
Thanks for your help
Tobias

Hi Tobias,
I recommend you use the Microsoft® Exchange Server User Monitor (EXMON) tool to monitor:
Microsoft Exchange Server User Monitor
Using ExMon, administrators can view the following:
IP addresses used by clients
Microsoft Office Outlook® versions and mode, such as Cached Exchange Mode and classic online mode
Outlook client-side monitoring data
Resource use, such as:
CPU usage
Server-side processor latency
Total latency for network and processing with Outlook 2003 and later versions of MAPI
Network bytes
Best regards,
Niko Cheng
TechNet Community Support

Similar Messages

How to keep MAPI properties when processing message data in RFC822 format in an Exchange Server 2007/2010 transport agent?

We are developing an agent listening for the submit or endOfData event from the Exchange Server. Due to various reasons we need to convert the Exchange Mail
internally to RFC822 format.
So our MessageProcessor internally converts the message stream (usually TNEF) into RFC822 format. This means when written our modified content back to ‘e.MailItem’
we write the converted content back.
It seems that this conversion causes a loss of some MAPI properties of the message.
When out-of-office-mails are enabled for an account the Exchange Server generates both messages the OOF message for internal recipients and the OOF message external
recipients.
When sending an internal message using voting buttons the message arrives without that voting information.
void Agent_OnSubmittedMessage(SubmittedMessageEventSource source, QueuedMessageEventArgs e)
MessageProcessor proc = new MessageProcessor();
Stream messageContent = e.MailItem.GetMimeReadStream();
Stream processedMail = proc.ProcessExchangeMessage(messageContent); // internally converts the message to RFC822
Stream writeStream = e.MailItem.GetMimeWriteStream();
processedMail.CopyToStream(writeStream);
We also tried a dirty „hack“ using the Exchange Server internal method for converting the message from TNEF to RFC822 “ConvertAnyMimeToMime” from “Microsoft.Exchange.Data.Storage.OutboundConversionOptions”,
but using that method causes the same issue.
Now my idea was cloning all MAPI properties not related to the content of a message and reapply them after writing the RFC822 content back to into e.MailItem.
Any idea how we can overcome our problems?
Best regards,
Harald Binkle
Exchange Server Toolbox |
SmartPOP2Exchange |
SpamAssassin
JAM Software GmbH
Max-Planck-Str.22 * 54296 Trier * Germany
http://www.jam-software.com

Hello Scott,
after posting this question I implemented a dirty workaround.
Now I'd like to ged rid of that workaround. Are you still not allowed to discuss this?
Best regards,
Harald Binkle
Exchange Server Toolbox |
SmartPOP2Exchange |
SpamAssassin
JAM Software GmbH
Am Wissenschaftspark.26 * 54296 Trier * Germany
http://www.jam-software.com

Syndication Map properties Issues!!!!!!!!!

Hi Guru's,
I am having some issue while doing settings for "SYNDICATING ALL RECORDS TO ONE XML FILE".
I had followed instruction as per SYndication guide pg 140,where it says:-
To syndicate all records to a single XML file
1. On the Map Properties tab, click in the Value cell of the XML File
Output property and select Single File (All Records) from the drop-down
list.
2. Click in the Value cell of the Repeating Record Node property and
select the repeating XML element which contains the record structure
But the issue is when i do the above still field "Repeatable record Name/Node" is greyed out and doesnot allow me to select IDOC segment.
So is this the issue with XML schema file OR is there something i am doing wrong?
Please let me know if anyone has got these issues..
Regards
Vikrant M Kelkar.

Hi Preethi,
Thanks for your reply.
Issue is, we had a XSD to which we added/extended some more fields..As a result root node of XSD was changed and the whole map now needs to be redone.
Old XSD was/is still allowing us to select Segment in Reapaetable node in Map Properties, but new XSD doesnot allow .
How is this possible that for same MDM version system allows to choose Repeatable node segment selection(in Map Properties tab) for one XSd and stops doing it for other?
Also if we dont select the repeatble node how will you map qualified tables?
Regards
Vikrant M Kelkar

The detail log (mapping, payload) in BPM

This is my scenario: SAP <-> XI <-> JDBC, because I need to use for-each component, so I used BPM and I used multiline component too.
Current status is, I can see the detail message mapping and payload through SXMB_MONI, but I can only see the message between XI and SAP or XI and JDBC.
Is it possible to see the detail message mapping and payload in BPM? I.e. I want to see the mapping and payload before/after the transform component (to see the mapping for the multiline and current line message.)
Another problem is, I can call XI and I can query JDBC (I use SXMB_MONI to see the message payload.) But finally the message is not returned to SAP. I click the "PE" from SXMB_MONI and I see the BPM graph, it shows a error (red) in the graph, but where could I see the detail log ? I double click the error component, but I cannot see any meaningful message in it.

hi,
you can monitor every step of a BPM
https://websmp201.sap-ag.de/~sapdownload/011000358700003141152005E/HowToMonitorccBPM.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Automapper mapping properties on a condition

Hi there,
I appreciate if anyone could assist me please?
I am using AutoMapper but i am finding it difficult to map the contents depending on a condition.
e.g
I have a parameter called includeOptional which can be either null or 1 .
If it is null I do not want to map the additional properties to the destination. The properties in the destination are nullable.
if the value is 1 I would like to map the additional elements.
Currently i am mapping everything from the source to destination as i am finding it difficult to map.
I will share some of my code:
IEnumerable<CustomersDAO> customers = databaseProvider.GetCustomersById(CustId);
//additional processing..
var result = null;
if(includeOptional == null)
result = Mapper.Map<List<CustomerDAO>, Customer[]>(customers);
else
result = Mapper.Map<List<CustomerDAO>, Customer[]>(customers);
How would i go about mapping the properties from source to destination for each of the customers in the collection if the condition is met.
I have the following but i cannot seem to get it work.
configuration.CreateMap<CustomerDAO, Customer>()
ForMember(dto => dto.StartDate, opt => opt.MapFrom(src => src.StartDate))
.ForMember(dto => dto.Name, opt => opt.MapFrom(src => src.Name))
.ForMember(dto => dto.Category, opt => opt.MapFrom(src => src.Category));

Hello IndusKing,
From your description, it seems that your issue is related the usage of the Automapper, for this, I suggest that you could post Automapper related issues to the Automapper specific forum:
https://github.com/AutoMapper/AutoMapper/issues
The current forum is used for Entity Framework.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows Network Drive Mapping properties not being associated with Test Stand deployment

I recently upgraded a TestStand/LabVIEW (Developer Suite 2012 DS1) deployment project from a Windows XP Pro OS to Windows 7 Enterprise. Now, when I run the Test Stand deployment, Network paths that used to be hard coded into my File Globals are no longer recognized. I re-wrote the vi's, and put "File Dialog" pop-ups so that I could see what path the control is being opened up at, and what appears to be happening is the Network Drive that I am defaulted to is appearing as if it is "disconnected" in the navigation window, and the path is defaulted to my root directory. I can navigate out to my network path no problem from the navigation window, and after the first time I perform this user action, subsequent executions open up to the path I have hard coded in my Sequence File Globals. However, if I reboot my host computer, I again have to go through the exercise of manually pointing to the proper network location? If I use the Windows Explorer to check Mapped Networked Drives, everything is properly mapped and connected.
Has anyone ever seen this behavior?

Hi ATE Dude 22,
I have not come across this problem before but here is a document from MSDN and one from NI which discuss file path conventions. From what I've seen, UNC is also accepted under Windows XP so I would advise using it for your file globals.
Cheers,
KyleP
Applications Engineer
National Instruments

SETTING PROPERTIES FOR A MAPPING VIA OMBPLUS ISN'T WORKING

Hi, i have a problem with OMBPLUS:
I have a script which creates a mapping and then is supposed to change properties for the mapping and seems to do so via OMBRETRIEVE. But when looking in OWB the properties aren't changed.
If I change any of the properties inside OWB and then run the script again, then the properties are changed. Does anyone know why the behavior is like this?
/thanx Joel
When running the script the output looks like this:
CREATE MAPPING 'XXX_1_IN'... DONE
DEFAULT_OPERATING_MODE={SET BASED FAIL OVER TO ROW BASED}
ALTER MAPPING PROPERTIES FOR 'T_A_TEST_XXX_1_IN'... DONE
DEFAULT_OPERATING_MODE={SET BASED}
-- ALL DONE --
The script:
set temp_module "TMP"
set tmp_table1 "XXX_1"
set tmp_table2 "XXX_2"
set map_name "XXX_1_IN"
puts -nonewline "CREATE MAPPING '$map_name'... "
OMBCREATE MAPPING '$map_name' \
ADD TABLE OPERATOR '$tmp_table1' BOUND TO TABLE '../$temp_module/$tmp_table1' \
ADD TABLE OPERATOR '$tmp_table2' BOUND TO TABLE '../$temp_module/$tmp_table2' \
ADD CONNECTION \
FROM GROUP 'INOUTGRP1' OF OPERATOR '$tmp_table1' \
TO GROUP 'INOUTGRP1' OF OPERATOR '$tmp_table2'
OMBCOMMIT
puts "DONE"
set prop [OMBRETRIEVE MAPPING '$map_name' GET PROPERTIES (DEFAULT_OPERATING_MODE) ]
puts "DEFAULT_OPERATING_MODE=$prop"
puts -nonewline " ALTER MAPPING PROPERTIES FOR '$map_name'... "
OMBALTER MAPPING '$map_name' \
SET PROPERTIES (DEFAULT_OPERATING_MODE) \
VALUES ('SET BASED')
OMBCOMMIT
set prop [OMBRETRIEVE MAPPING '$map_name' GET PROPERTIES (DEFAULT_OPERATING_MODE) ]
puts "DEFAULT_OPERATING_MODE=$prop"
puts "-- ALL DONE --"
puts ""
OMBDISCONNECT

Thanks for your idea Roman, but it doesn't solve my problem.
The problem is regardless of which property (Runtime parameters in OWB) I try to change. Before ANY property is changed via OWB (GUI) the changes via OMB doesn't come to effect (even if RETREIVE after OMBCOMMIT says so).
Regards, Joel

SETTING PROPERTIES FOR A MAPPING VIA OMBPLUS ISN'T WORKING (OWB10gR2)

Hi, i have a problem with OMBPLUS:
I have a script which creates a mapping and then is supposed to change properties for the mapping. The script worked in previous releases of OWB but after upgrading to 10gR2 I get an error that DEFAULT_OPERATING_MODE property does not exist.
Does anyone know why I get the error?
/thanx Joel
When running the script the output looks like this:
CREATE MAPPING 'XXX_1_IN'... DONE
DEFAULT_OPERATING_MODE={SET BASED FAIL OVER TO ROW BASED}
ALTER MAPPING PROPERTIES FOR 'T_A_TEST_XXX_1_IN'...
OMB02902: Error setting property DEFAULT_OPERATING_MODE of T_A_TEST_XXX_1_IN: MMM1034: Property DEFAULT_OPERATING_MODE does not exist.
-- ALL DONE --
The script:
set temp_module "TMP"
set tmp_table1 "XXX_1"
set tmp_table2 "XXX_2"
set map_name "XXX_1_IN"
puts -nonewline "CREATE MAPPING '$map_name'... "
OMBCREATE MAPPING '$map_name' \
ADD TABLE OPERATOR '$tmp_table1' BOUND TO TABLE '../$temp_module/$tmp_table1' \
ADD TABLE OPERATOR '$tmp_table2' BOUND TO TABLE '../$temp_module/$tmp_table2' \
ADD CONNECTION \
FROM GROUP 'INOUTGRP1' OF OPERATOR '$tmp_table1' \
TO GROUP 'INOUTGRP1' OF OPERATOR '$tmp_table2'
OMBCOMMIT
puts "DONE"
set prop [OMBRETRIEVE MAPPING '$map_name' GET PROPERTIES (DEFAULT_OPERATING_MODE) ]
puts "DEFAULT_OPERATING_MODE=$prop"
puts -nonewline " ALTER MAPPING PROPERTIES FOR '$map_name'... "
OMBALTER MAPPING '$map_name' \
SET PROPERTIES (DEFAULT_OPERATING_MODE) \
VALUES ('SET BASED')
OMBCOMMIT
puts "-- ALL DONE --"
puts ""
OMBDISCONNECT

Hi, don't look at the script it was copied and pasted from an old thread. The problem is the error I get when trying to execute:
OMBALTER MAPPING 'map_name' \
SET PROPERTIES (DEFAULT_OPERATING_MODE) \
VALUES ('SET BASED')
OMB02902: Error setting property DEFAULT_OPERATING_MODE of map_name: MMM1034: Property DEFAULT_OPERATING_MODE does not exist.
//Joel

GPO Drive mapping - drive not visible but mapped

Did you double check your policy and make sure you selected "Show this drive" for that mapped drive?

HiI've got a weird issue and Internet has yet to give me a solution.So I've created a GPO that maps drives to certain users inOU's.Users that do not yet have a profile ona workstation get the drive mapped as expected. But users that have previously logged on to the workstations do not see the drive.gpupdate /force does not seem to resolve the issue. I ran a gpresult /H result.html and saw that the GPO succeeded in applying the user settings. I checked the drive with "net use" and there I could see that the drive was mapped butjust not visible in Windows. The drive letter I'm using is not used by another device. The reconnect checkbox is ticked in the Drive Maps properties.When I type the drive letter in the addressbar in explorer ( N:\) it works flawlessly so it's not a permission issue.So to summarize: drive is accessible and mapped...
This topic first appeared in the Spiceworks Community

SSRS Map report

Hi ,
I am facing one difficulties in SSRS Map report.
In my map report there are many states coming ,some having data some not
I have linked states to other report so if I click on state having data it will go to another
report, I want not to show clickable on states which is blank ,i have markerd those states have no data in white colour.
please suggest me some solution
regards,
Vipin jha
Thankx & regards, Vipin jha MCP

Hi Vipin jha,
According to your description, you want to have the states with data link to detail report by clicking. Right?
In Reporting Servcies, if we want to have the states link to another report, we can right click on the polygon, select Map->Map Properties->Action->Go to report. Choose the detail report and pass the state as parameter so that the detail report
can filter report based on this value.
Please post some screenshot of sample you want if possible.
Best Regards,
Simon Hou

Syndicating Key mapping value from lookup table

Hi Experts,
I want to Syndicating Remote Key value from lookup table as per the remote system.
In syndicator, if I map destination field to the remote key of the lookup table, I am getting blank value.

Hi Mrinmoy,
kindly check in the Data Manger whether have you maintained Remote keys for the lookup table. If yes then choose the specified remote system from Remote key override fields under Map properties in the syndicator.
Incase you cant find the remote system in the "remote key override" field for which remote key is assigned in Data manager, then you need to check the Type (outbound) of the remote system in Console admin node. Because only those Remote systems type set as Outbound can been found in Remote key Override in the syndicator.
After choosing the remote key you need to map the destination field with Remote key value as shown in the below image.
Regards
Rahul

Value Mapping in PI 7.0

Hi All,
I need to implement the value mapping.
The mapping rule for the value mapping is for varius z tables like
ztable1
ztable2
ztable3
ztable4
ztable5
ztable6
ztable7
Can you please help me in implementing the value mapping ?
Can you please tell me the steps to umplement it?
Thanks in advance

How can I come to know about the Agency and Schema to implement the Value Mapping?
Check the blog # 5479
From the blog:
Enter Value Mapping Properties such as Agency, Schema for Source and Target messages. Any arbitrary string value can be
used. But enter the Value Mapping Context as http://sap.com/xi/XI
I am not getting which Value Mapping should be done for my mapping requirement,but I thibk it should be for the fixed value,but dont know whether I need to implement the Valume Mapping replication or not?
If you give more details about your requirement then somebody may help you out on the approach.
Regards,
Abhishek.

5.1 Audio Mapping Export

I am using Adobe Premiere CS6 and planning ahead to export a short film I'm working on for a DCP conversion service. (Link)
When I emailed them they say that they require 5.1 sound to be exported in the following mapped channel order; Left, Right, Centre,LFE, Left Surround and Right Surround. When I view the metadata properties (e.g. in Quicktime player) the order is always L, R, Ls, Rs, C, LFE. I've downloaded ASIO4All and edited the Audio Output Mapping properties with no luck. Adobe Audition exports so that the channel mapping is in the required order and yet not Premiere.
Please assist. Thank you in advance.

Thanks a lot for your prompt reply, Steve. Below is an image of what I did for Audio Output Mapping.
You said CC adds labelling but is it TRUE channel mapping order? Having those channels in that specific order? Since that's what DCP seems to require.

CCMSetup.exe - Will not install the ConfigMgr 2012 R2 CU3 Client Agent. Logs Listed.

I have been diagnosing a few ConfigMgr logs and I discovered a few things that sparked my interest like "Reseting the WMI Repository", "Checking the WMI Namespace", and "CCMClean.exe Tool and Re-run CCMSetup.exe".
None of the above had any effect on the client's workstation. So, I figured that if I can't figure it out, I will find a MVP or ConfigMgr Admin who has remediated this issue.
<![LOG[Successfully created the ccmsetup service]LOG]!><time="14:23:28.293+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="1932" file="ccmsetup.cpp:3260">
<![LOG[==========[ ccmsetup started in process 7696 ]==========]LOG]!><time="14:23:28.358+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4740" file="ccmsetup.cpp:9441">
<![LOG[Running on platform X64]LOG]!><time="14:23:28.358+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4740" file="util.cpp:1892">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="14:23:28.359+360" date="03-05-2015" component="ccmsetup" context="" type="0" thread="4740" file="ccmsetup.cpp:9285">
<![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="14:23:28.359+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4740" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1401]LOG]!><time="14:23:28.359+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4740" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="14:23:28.360+360" date="03-05-2015" component="ccmsetup" context="" type="0" thread="4964" file="ccmsetup.cpp:3365">
<![LOG[Successfully started the ccmsetup service]LOG]!><time="14:23:28.360+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="1932" file="ccmsetup.cpp:3271">
<![LOG[Deleted file C:\WINDOWS\ccmsetup\ccmsetup.exe.download]LOG]!><time="14:23:28.362+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="1932" file="ccmsetup.cpp:9497">
<![LOG[Task 'Configuration Manager Client Upgrade Task' does not exist]LOG]!><time="14:23:28.363+360" date="03-05-2015" component="ccmsetup" context="" type="0" thread="1932" file="wintask.cpp:634">
<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="14:23:28.363+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="1932" file="ccmsetup.cpp:10879">
<![LOG[Running on 'Microsoft Windows 7 Enterprise ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18]LOG]!><time="14:23:28.396+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="util.cpp:1974">
<![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice "/mp:sdlcorpwsccm02.suddenlink.cequel3.com" "/forceinstall" "smssitecode=P12" "FSP=sdlcorpwsccm02.suddenlink.cequel3.com"]LOG]!><time="14:23:28.396+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="14:23:28.396+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice "/mp:sdlcorpwsccm02.suddenlink.cequel3.com" "/forceinstall" "smssitecode=P12" "FSP=sdlcorpwsccm02.suddenlink.cequel3.com"]LOG]!><time="14:23:28.397+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="14:23:28.397+360" date="03-05-2015" component="ccmsetup" context="" type="0" thread="4964" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="14:23:28.397+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:8621">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="14:23:28.397+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:8636">
<![LOG[CCMHTTPSSTATE: 224]LOG]!><time="14:23:28.397+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:8654">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="14:23:28.397+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:8672">
<![LOG[FSP: sdlcorpwsccm02.suddenlink.cequel3.com]LOG]!><time="14:23:28.397+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:8724">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="14:23:28.397+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:8782">
<![LOG[Config file: ]LOG]!><time="14:23:28.399+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:4539">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="14:23:28.399+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:4540">
<![LOG[MSI log file: C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="14:23:28.399+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:4541">
<![LOG[MSI properties: SMSSITECODE="P12" FSP="sdlcorpwsccm02.suddenlink.cequel3.com" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="14:23:28.399+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="14:23:28.399+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:4550">
<![LOG[MPs:]LOG]!><time="14:23:28.399+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:4569">
<![LOG[ sdlcorpwsccm02.suddenlink.cequel3.com]LOG]!><time="14:23:28.399+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:4584">
<![LOG[No version of the client is currently detected.]LOG]!><time="14:23:28.400+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:2748">
<![LOG[Task 'Configuration Manager Client Retry Task' does not exist]LOG]!><time="14:23:28.401+360" date="03-05-2015" component="ccmsetup" context="" type="0" thread="4964" file="wintask.cpp:634">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="14:23:28.402+360" date="03-05-2015" component="ccmsetup" context="" type="0" thread="4964" file="ccmsetup.cpp:9285">
<![LOG[Sending Fallback Status Point message to 'sdlcorpwsccm02.suddenlink.cequel3.com', STATEID='100'.]LOG]!><time="14:23:28.402+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:9760">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x8004100e]LOG]!><time="14:23:28.403+360" date="03-05-2015" component="ccmsetup" context="" type="2" thread="4964" file="ccmsetup.cpp:9842">
<![LOG[Params to send FSP message '5.0.7958.1401 Deployment ']LOG]!><time="14:23:28.403+360" date="03-05-2015" component="ccmsetup" context="" type="0" thread="4964" file="ccmsetup.cpp:9891">
<![LOG[State message with TopicType 800 and TopicId {2CA81B64-EBF4-4E73-B1FB-836EC58B350F} has been sent to the FSP]LOG]!><time="14:23:28.476+360" date="03-05-2015" component="FSPStateMessage" context="" type="1" thread="4964" file="fsputillib.cpp:752">
<![LOG[Running as user "SYSTEM"]LOG]!><time="14:23:28.487+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:1995">
<![LOG [Sending Fallback Status Point message to 'sdlcorpwsccm02.suddenlink.cequel3.com', STATEID='328'.]LOG]!><time="14:23:28.488+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4964" file="ccmsetup.cpp:9760">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x8004100e]LOG]!><time="14:23:28.490+360" date="03-05-2015" component="ccmsetup" context="" type="2" thread="4964" file="ccmsetup.cpp:9842">
<![LOG[Params to send FSP message '5.0.7958.1401 Deployment Error 0x80004005']LOG]!><time="14:23:28.491+360" date="03-05-2015" component="ccmsetup" context="" type="0" thread="4964" file="ccmsetup.cpp:9891">
<![LOG[State message with TopicType 800 and TopicId {DBB1E065-465B-47CE-9221-E644FE138C68} has been sent to the FSP]LOG]!><time="14:23:28.566+360" date="03-05-2015" component="FSPStateMessage" context="" type="1" thread="4964" file="fsputillib.cpp:752">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="14:23:28.568+360" date="03-05-2015" component="ccmsetup" context="" type="1" thread="4740" file="ccmsetup.cpp:10883">
If you can help me solve this issue, you would be much appreciated. :)

The FSP error is showing because our "ConfigMgr Engineers" said we didn't need it enabled. So we have our clients looking for a FSP that isn't even enabled on the ConfigMgr server.
Yes, that's not the point though. ccmsetup will try to send a message to the FSP after a failure and the thing that happens, as mentioned, right before it tried to send a message is to update the security on the ccmsetup folder which implies something went
wrong when it tried to do this.
Have you disabled your AV or other local products that may interfere with local security?
Jason | http://blog.configmgrftw.com | @jasonsandys

Can we add links to perform editing, modify properties in KM Report output?

Hello,
I have created KM report which provides list of XML forms which satisfy specific conditions. Now I want to add links on report output so that user can click on that link and can directly start editing documents if needed. Also I want to provide direct link which can open properties of document.
Also can we add images/ icons on a particular row like traffic lights icons: Green, Yellow, Red.
Thank you,
Nitesh Shelar

I have another question related to following class may be that can put more light on my base requirement. I am creating Result item object based on details I found on various KM articles for KM reports. I wonder what is that List executedCommands, object.
public static ResultItem getInstance(RID rid,
                                     Map properties,
                                     List executedCommands,
                                     boolean hadError,
                                     String statusDescription)
Can any one tell me about this List executedCommands and what exactly I should pass there and how it is going to affect my output?

Log MAPI Properties

Similar Messages

Maybe you are looking for