Logging into AppleID for FaceTime & iMessage fails without error

I want to setup FaceTime and iMessage.
I have an Apple ID that is an email address other than ME.COM. The address is verified and I use it to log into iTunes and iCloud.
When I try to log in with the apple ID, the screen moves forward to the email address screen, but then goes right back to the login page without an error. Nothing I have been able tomtrynhas made it log in. I even attempted to do the login on another iPad and it worked fine. So it's apparently something with that iPad.
I have reset the iPad, tried forcing FaceTime and iMessage closed, but not sure what else I can do. I'd like to avoid doing a full reset and restore. So if there is anything else I can try, I want to go down that road first.
Thanks,
Steve

I don't know if this will work, but it's far less of PITA than restoring the iPad to factory settings. Have you tried resetting all settings?
Settings>General>Reset>Reset all settings. I don't know if that will reset FaceTime and Messages, but you will have to set up all of your app preferences and iPad preferences again if you try it. Not nearly as much work as restoring though.

Similar Messages

Publishing of the translation for an Iview fails without any notice

We face the followoing problem with an custom IView in SAP portal:
The publishing of the translation for an Iview fails without any notice it only works directly after the IView was deployed.
The translation is done by first generating the translation data then translating to the several languages, marking the data as translated. After that the translation is published via the Translation Worklist Coordination.
All is done in the Portal under Contenet-Administration->Portal Content Translation, Translation Worklist Coordination and Worklist Translation
The publishing works directly after deployment of an iView but if one tries to retranslate the translation is saved in the repository but not published. If we delete the translation Worklist and start over again the translations that are not published are still in the generated data but still we cant publish them.
There is no Information that the publication failed or anything. In the Worklist it just goes back to normal state where we can again generate the translation data.
The Iview is a Java IView for the translation a properties file was created and all the words from properties file show up in the generated data from the Worklist.
We could deploy the Iview every time the translation needs to be changed but the customer wants to do the translation without that step.
We use the following Versions:
Sap Portal nw2004s
sap.com/SAP-JEECOR 7.00 SP10 (1000.7.00.10.0.20061026144500) 20070119122211
sap.com/SAP-JEE 7.00 SP10 (1000.7.00.10.0.20061026144500) 20070119121940
Thanks 4 Help

Please review the terms of your Comcast agreement. Many agreements include scheduled price increases, and typically state that prices will return to the prevailing (almost always higher) rates when the agreement expires.
If you still have questions contact one of their Billing reps at the phone number on your bill or 1-800-Comcast, chat with them using one of the "Account and Bill" options at https://www.comcastsupport.com/chatentry/, or visit a Service Center if one is nearby (check locations and hours at http://customer.xfinity.com/service-center-locations).
Comcast sometimes responds to questions here in the forums, and sometimes they do not. When they do the typical response time is somewhere between a few hours and a few days.

In perfdatasource querying for global snapshot failed with error 'the size limit for this '

I received scom alerts from two win 2k8 r2 servers , hosting exchange 2010 mailbox roles , the alerts came almost in same time from both servers ,
can I ignore those alerts
or can someone give a me a clue how can I troubleshoot those alert , please any help would be appreciated
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
from Ops-mgmt logs
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 1
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.LogicalDisk.PercentIdle.Collection
Instance name: " edb file path "
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.NetworkAdapter.CurrentBandwidth.Collection
Log Name: Operations Manager
Source: Health Service Modules
Date:
Event ID: 10104
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server 2
Description:
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.ForefrontProtection.FPE.Server.PerformanceCollection.RealtimeScanMessageRate

Hi Blake ,
Thanks for your reply , I appreciate your help ,
I didn't put the alert from scom console because they were same as the events ( same source )
Health Service Modules, I didn't want to spam
more :-)
also the two servers encountered the issue were mailbox servers and part of same DAG , it worth mention the alert were resolved
by Exchange 2010 Correlation Engine service
http://blogs.technet.com/b/kevinholman/archive/2010/10/15/clustering-the-exchange-2010-correlation-engine-service.aspx
http://support.microsoft.com/kb/2592561
also the Opsmgmt logs are full of waring and error event like 2023 , 21402 , 21403 , 1207 !!
Log Name: Operations Manager
Source: HealthService
Date:
Event ID: 2023
Task Category: Health Service
Level: Warning
Keywords: Classic
User: N/A
Computer: server 1
Description:
The health service has removed some items from the send queue for management group "SCOM" since it exceeded the maximum allowed size of 15 megabytes.
1- alert from console >>
In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this '
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.Server.2008.OperatingSystem.PercentMemoryUsed.Collection
Instance name: Microsoft Windows Server 2008 R2 Enterprise
EventSourceName: Health Service Modules

Can't sign into icloud for PC because of server error

Hi There
I am trying to log into ICloud for PC but every time I try it says cannot log into cause of server error. However the status of the server is fine when I look into it more. Why can't i get in?

I got the same problem, too. But try a few things first.
Update the version to 1.1.
Login with full creditials, talking about [email protected]
Try getting a .mac account (I think this one is kind of dumb.)
Good Luck!

Installation of Updates for Photoshop CS6 failed. Error code U44M1U5 for Camera Raw and U44M1P210 for Adobe Application Manager

The Installtion of updates for Photoshop CS6 failed. Error code for Update of Adobe Application Manager is U44M1P210, for all other features (Adobe Bridge, Photoshop CS6, Camera Raw) U44 M1U5

You go Photoshop CS6 > Help > Updates ...

HT1339 i cant log into instagram fro my ipod it says error & connection to log in server is in error. i deleted & installed the app again. it still wont allow me to log in what can i do ?

i cant log into instagram fro my ipod it says error & connection to log in server is in error. i deleted & installed the app again. it still wont allow me to log in what can i do ?

iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Won't let me log into Messages or FaceTime on MacBook Pro

Recently sent my Mac off to get fixed and it came back to me with Yosemite installed. Since then I have tried to log back into Messages and FaceTime on my Mac but am faced with "The user name or password was incorrect. Try again." on Messages and "An error occurred during activation. Try again." on FaceTime. I know my Apple ID is correct! Plus I've had to sign in with the Apple ID at logon as well and that's posed no problems. Both iMessage and FaceTime work fine on my iPhone 5S.
I've tried to allow permissions through Firewall along with more suggestions I've found online, but nothing seems to work.
It was fine on the older OS... help!

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait for it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

Why won't my Apple ID work for Facetime & Imessages?

Ok, I've just brought the new Itouch (I was using the first gen itouch beforehand) I've connected it up to my Itunes and registered my new product with out a hitch. However! One of the many reasons for the upgrade is so that I can keep in touch with friends aborad using the facetime app. I've gone in and it's asked me to supply or create my apple ID which I have done (tried my old ID) but i get the same error message "you were signed out of Face time because your apple ID or password changed" but I have not changed anything!
After having a look on the board it seems like it could be that I'm not set up for Icloud, again this is a problem as everytime it tries to verify it says to go to my mail account for a varification email but nothing has been sent. Or, do i need to do anything that will revove my old Itouch? I haven't wipped it yet as I wanted to make sure my new one was up and running first.
I am at my wits end,
Please help!

In my continuing search for a solution, I've come across another discussion of this problem that may be useful to some. You will find here: http://forums.macrumors.com/showthread.php?t=1250735
It offers two ideas to try.
First, if you are using Little Snitch, try turning it off when you want to log into iCloud. (As it happens, I do use LS, but turning it off made no difference for me. Some of the posters do report success, however.)
Secondly, try deleting the ~/Library/Application Support/iCloud/Accounts folder. (Again, some posters report this solved the problem, but it didn't work for me.)
Let us know if you have luck with either of these.
Jophan

Unable to log into Facebook for BlackBerry 10 since last year

Please help me understand why the facebook app for BlackBerry 10 doesn't allow me to login at all. See the attached screen shot which may not successfully load (error message reads as follows "sorry, an unexpected error occurred. Please try again later), I haven't had the chance to even submit my login credentials. This has happened every single time I click the app for several months now.
Bought my Z30 last year summer/ fall and love it except for the lack of app selections.
However no luck even after the two BlackBerry 10 OS updates to 10.2.1 and the last two Facebook for BlackBerry 10 updates to 10.4.0.12. Un-installing, re-installing, deleting from phone and also removing from My BlackBerry World account did not work.
I have no problems logging into the facebook app made for iPhone, iPad. I'm able to login into my Facebook on Mac computer. Windows computer and even on the BlackBerry browser.
I have already exhausted my options with hours on the phone with tech support at Phone company.
I am hoping I can get some help without having to wipe my phone completely or having to send it into the phone company.
In addition, they will give me a loaner which so far I'm told all their stores only have z10 and no Z30s to give me while my Z30 will be in for repairs.
Any useful advice would be appreciated. Please read the above in its entirety before responding so you will know what I have already done.
Thanks in advance.

Photoshop.com is gone. If you had photos stored there, you should have received a series of emails about their being moved to Revel. You can't sign in because there's nothing to sign in to.

Cannot log into CMS and all services fail to load on installation.

A trial version of Crystal Server XI r2 was installed due to problems with the license key for our purchased version of XI. The r2 has since expired and I have uninstalled it. I have now tried to install XI several times, but I am having a problem with the installation where it is Starting Services. I get errors for each server Error 1920 Service Destination and server failed to start. Please can you advise why this is occurring and what I can do to fix it?
I keep getting the log in for the CMS, but no matter what I enter it fails. Possibly I have selected something wrong in the installation. I do not believe we had to log into the CMS previously.
It comes up with
System: CrystalReports (no other options) User Name: Administrator
Password:
Authentication: Enterprise (other options LDAP, Windows NT, Windows AD - all these come up with error that there is no plug-in). I have entered the server password which failed, tried it blank which failed. I do not know what is required here.
I have tried all our passwords, but no users or passwords work. I have tried selecting different options, but have mostly tried New with the Create new or use existing, java and iis both selected as default, SQL Server and entered sa + password,
I think probably an old version of the CMS exists from the original installation, but I have tried complete uninstall.
In the event viewer there is error:
Event Type:     Error
Event Source:     Application Error
Event Category:     (100)
Event ID:     1000
Date:          18/08/2010
Time:          14:16:24
User:          N/A
Computer:     CRYSTALREPORTS
Description:
Faulting application cacheserver.exe, version 11.0.0.1282, faulting module unknown, version 0.0.0.0, fault address 0x7ff2fbfc.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 63 61 63   ure cac
0018: 68 65 73 65 72 76 65 72   heserver
0020: 2e 65 78 65 20 31 31 2e   .exe 11.
0028: 30 2e 30 2e 31 32 38 32   0.0.1282
0030: 20 69 6e 20 75 6e 6b 6e    in unkn
0038: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0040: 30 2e 30 20 61 74 20 6f   0.0 at o
0048: 66 66 73 65 74 20 37 66   ffset 7f
0050: 66 32 66 62 66 63         f2fbfc
Please can someone help? I am almost suicidal!
Georgie

Moved to BOE forums where CRS is supported.

Using a different appleID for facetime on iPad

I have a macbook pro and an iphone, both set up with my appleID. I recently bought two iPads for my children for school purposes. Both iPads have my appleID on them for apps and such. (I already purchased apps for my iphone and they're too young for their own appleIDs) I bought the iPads through my wireless carrier since I got a deal for adding them on to my existing contract. Therefore, both ipads came with their own numbers, although I can't seem to figure out how to make those numbers work with the ipads. I'm trying to figure out how to make the given numbers work on their individual ipads so they can facetime distant relatives without distrupting each other or me. (When one device receives a facetime request, they all do) Is there some way I can make this happen? While continuing to use my appleID for apps? I apologize if I'm not being clear. Perhaps that's why I can't seem to figure this out for myself. Any help would be appreciated. Thanks

Find my phone is part of iCloud, so if she uses her own ID for iCloud you can't track her device.
A better solution would be to download and use the Find My Friends App.

Why can't i log into messenger or FaceTime in ios7?

After I updated to iOS 7 I haven't been able to log into my messenger or FaceTime it keeps saying that I need to connect or check my network connections even thou I know everything else works fine please help

I have exactly the same problem. Everything works on the iPhone but not on the ipad.
I have searched for fixes and a basic one says to log out of apple and turn off messenger and FaceTime but I don't have that option. When I look at the user guide it shows more options when setting it up than I have on my I pad.
If anyone can help it would be much appreciated.
Frustrated I like things to work even if I hardly use them.
Please help

I cannot verify my Apple ID. I keep getting the error that the email is in use by another user. I can log into the store and use Itunes without issue. But I cannot manage my Id. Any suggestions?

When I try to log into Apple ID I get this message.
I have not recieved a verifcation email and nothing is recieved when I resend it.
The email address is correct and I use it daily.
After I get this error message I can proceed no further with managing my ID
Please Help!
Verify your email address.
A verification email was previously sent to [email protected] We can resend the verification email to the same address, or if this address is incorrect you can change your Apple ID and email address.
Verify your email address.
A verification email was previously sent to [email protected]. We can resend the verification email to the same address, or if this address is incorrect you can change your Apple ID and email address.
Apple ID and Primary Email Address
Email address is already verified for another Apple ID

It may not be particularly helpful to you but I would not be surprised if the message number 2 refers to the verification you did that attracted message number 1.
Just a thought.

Is there a way to have an AppleID for an end-user without credit card info attached to it?

I am in charge of managing the Macs in our department. We have purchased a volume license for Mountain Lion (can't jump to Mavericks yet until we upgrade other software). I have a code to redeem, but the end-user is supposed to have an AppleID. I went ahead and started creating one for her, but it asks for credit card information, and corporate does not wish to have this information attached to an end-user's ID - they just want to supply it at the time of purchase for any future purchases (fear of identity theft and/or unauthorized purchases, I guess).
Our Mountain Lion software is already purchased, so Apple shouldn't need the credit card info for us to be able to install it. I can't install Adobe's Creative Cloud software until she's at least up to Mountain Lion … I feel I am hitting a major roadblock here! Any suggestions? Is this a new requirement? My own AppleID (for work) that I've had for awhile has no credit card currently attached to it … must not have been required at the time.

Try this on that Apple ID to get the None payment method option;
This user, mountaingoatgirl, explains how to get a None option in your account details in the iTunes app on a Mac or PC. -
https://discussions.apple.com/message/24907941
Then in the future use Apple's suggested method to create Apple IDs that don't require a credit card.
Creating a new Apple ID for an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
http://support.apple.com/kb/HT2534

How to find the number of users log into ESS for last three months

Hi Team
Is there any transaction / Report to find the number of users logged into the ESS and used the payslip tab. Is this possible to find?
Waiting for hopeful replies.
Regards
Bhaskar

Bhaskar,
you can use google analytics,
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b94044-7008-2b10-1680-c04e4526367b
jo

Logging into AppleID for FaceTime & iMessage fails without error

Similar Messages

Maybe you are looking for