Logging off multiple login sessions of the same user

Hi,
When I login to solaris through a telnet session and type "who", I see that many of my previous terminal login sessions from the same ip address are still open.
Although only one telnet login session is established curretly, I see multiple previous logins.
How can I kill all the previous login sessions I made from the same IP address as the current one?
Thanks,
Rommel Sharma.

Try this:
kill -1 `ps -fu username | awk '{ print $2 }'`
This will kill all the user sessions, including the one you ran it from. It's a bit extreme, but simple. :-)
HTH,
Roger S.

Similar Messages

  • Multiple sessions for the same user

    Hi,
    The scenario is like this. The user is logged into the system using JAAS and
    has a session object created. I want to create a new session for the same user
    with the already available credentials. This is to provide the same user the access
    to the application in another window with different session object. How can do
    that in Weblogic 8.1 server ?
    thanks in advance,
    Krishna.

    Hi
    I think it would be easier to enable session time out settings using GPO considering you work in a domain environment..
    Having session timeouts settings you could say... hey after 15 min of inactivity disconnect the user and then after 15 min of disconnected session log him off
    Take a look at this URL: http://technet.microsoft.com/en-us/library/cc754272.aspx
    Hope this helps
    Best regards
    Joaquin Camarero Muñoz

  • Imp: new session for the same user if  idle for 4 mins. or else throw error

    Dear All,
    I have a requirement where for security reasons if a session remains idle for 4 mins. or more, it should redirect to login page. This is easy as there is a feature in apex itself under security in application properties. This works fine.
    But I also don't want the users to start two active parallel sessions for the same user, and allow user to login only if the session for the user is idle for 4mins. or more or else display error message that the user has already logged.
    A second in sequence, on submit process for this in page 101 when login button is hit is written for this. It is as follows:
    declare
    found boolean := false;
    begin
    for x in (SELECT a.apex_user from apex_workspace_activity_log a,apex_workspace_sessions b, (SELECT max(view_date) as maxdate FROM apex_workspace_activity_log where upper(apex_user)=upper(:P101_USERNAME) and APPLICATION_ID=120) maxresults, (SELECT max(session_created) as maxcreate FROM apex_workspace_sessions where upper(user_name)=upper(:P101_USERNAME)) maxsession where b.session_created=maxsession.maxcreate AND b.APEX_SESSION_ID!=:SESSION and upper(b.user_name)=upper(:P101_USERNAME) and b.APEX_SESSION_ID=a.APEX_SESSION_ID and a.seconds_ago<240 AND a.APPLICATION_ID=120 and a.view_date=maxresults.maxdate and rownum=1) loop
    found:=true;
    raise_application_error(-20000, 'Already Logged.');
    exit;
    end loop;
    IF not found THEN
    null;
    END IF;
    end;
    But for some this reason this does not work as intended. Two users can login parallely.
    When I trace the program, I see that it should catch the parallel user login. But it does not.
    Is it some db cache issue? I don't know.
    Kindly let me know how to fix this. It is crucial for us to achieve this.
    Thanking in advance.
    Regards,
    Deepika.

    Dear Fateh,
    Thanks for the reply.
    The features of this plugin are:
    Configurable timeout actions including alert, redirect, and logout
    Optional and configurable warning message
    Option to keep session alive if user isn’t truly idle. Special thanks to Martin D’Souza for a great idea on how to implement this feature.
    But it cannot stop a new session for a user, if there is an active (in my definition apex_workspace_activity_log.seconds_ago<240) session already running for that user.
    Regards,
    Deepika.

  • TS1398 My iPhone is not showing that its connected to wi-fi at home. My laptop is connected, but the phone is only showing 3G. I've turned the phone off and on multiple times, turned wi-fi on & off multiple times, all with the same result of no wi-fi.

    My iPhone is not showing that it is connected to wi-fi. My laptop is showing the wi-fi signal with a completely strong signal.  I have turned the phone off & on multiple times, and have turned the wi-fi (on the phone) off & on multiple times as well, all with the same result. Help!!! Any suggestions?

    Poof! It's working like normal! Thanks Lawrence! Guess I have to learn patience!

  • How to avoid one active session for the same user account concurrently

    Hi all ,
    i am using model 1 architecture in my application.
    in my application ,if one user login through 2 browser at a time ,he can do it.
    But now ,i want to close first browser or redirect him to a exception page.
    plz guide me how can i do it.
    plz include case1.
    what happen if he close page ,not logoff
    case2
    what happen if power cut happen on client side.

    +You can use a column in the table to check the current user logged in status. Once the user gets logged in the application change the flag at the backend. In this way you can know whether the user is already logged in the apllication or not, and based on this you can show a proper message to the user.+
    +If the user closes the browser window without logging off the application, then in this case you can use the session Listoners.+
    Well not the right approach Listeners would it for you.For browser closure problem.If user does that automatically container destroys the session object as per configured session-timeout.
    *@OP*
    Problem 1:
    Try to a write an implementation of sessionListener / sessionAttributeListener (for having a check on user loggins and apply a global filter which checks available users who have already logged in)
    Hope the below thread might give you some idea of how to go about.
    http://forum.java.sun.com/thread.jspa?threadID=5226527&messageID=9922478
    Problem 2:
    consequently configure session-timeout parameter in minutes under web.xml for session browser close and inactivity state problems.
    REGARDS,
    RaHuL

  • Is there a way to disable concurrent Weblogic Admin Console sessions for the same user?

    A coworker on another workstation and I are able to log into same user account on the Weblogic Admin Console at the same time. I would like to restrict access so only one session per user account can be logged in to the Admin Console. Is this possible?
    Alternatively, is there a way to log identifiable information (IP/workstation) when multiple sessions for one account occur at the same time?
    I am using 10.3.6.0

    Hi,
    You could also check the http access logs for such info. There you could see records for the received requests, with each record starting with the source IP that initiated the request.
    The default location for access logs is ${DOMAIN_HOME}/servers/${SERVER_NAME}/logs. Of course in your case, the ${SERVER_NAME} would be your admin server name (AdminServer if left as default).
    Regards,
    Mohab

  • How to create a different browser session within the same profile

    Internet Explorer 8 lets you create a new session within a new browser window but how can I do the same with Firefox? I know if you switch user profiles then you can have two browsers in different sessions but I would like to have two sessions using the same user profile.

    Sorry, that's not possible with Firefox. Firefox uses a single executable instance to run all windows and tabs, where IE starts another process for each window. Chrome uses a separate process for each tab (or window), which seems real nice until it sucks the life out of an older processor with the "overhead" of all those separate processes.
    Depending upon what you want a "different session" for, there are 3 extensions that allow for multiple cookie sessions which allow for multiple, simultaneous logins to the same server. That works to allow the user to log into multiple webmail accounts at the same service provider. <br />
    Multifox: <br />
    http://br.mozdev.org/multifox/ <br />
    Cookie Swap extension: <br />
    https://addons.mozilla.org/firefox/3255/ <br />
    Cookie Pie extension: <br />
    http://www.nektra.com/oss/firefox/extensions/cookiepie/

  • N9, multiple caldav sync entries with same user na...

    Hi, With N9, is it possible to create multiple CalDAV accounts with the same user name? I am asking this because with Google calendar I have shared calendars with family members, and it is possible to sync to these calendars using my own Google account and with a specific server path. I would just need to have several CalDAV entries in order to sync to each of them? (I am currently using CalDAV to sync to my wife's calendar and Mail for Exchange for my own gmail account but I don't quite like this.) On my previous phone I used GooSync which handled all this, but I don't yet know is it possible to use that with N9. Eero
    Solved!
    Go to Solution.

    posting this here as this is just about the top Google search hit:
    Check the URLs suggested here:
    http://forum.meego.com/showthread.php?t=3729
    Quote: 
    The URL for your main calendar should be: https://www.google.com/calendar/dav/ The URLs for additional calendars should be: https://www.google.com/calendar/dav/[email protected]​endar.google.com/ In both cases the trailing slashes are important. The '@' must not be URI escaped (i.e. '%40'). The long UUID can be found on the individual calendar settings panels, and on the Google page above. 

  • How open multiple responsibilities in the same user login session in R12 ?

    Dear All,
    Can anyone help me to know how to open multiple responsibility in the same user login session in R12 ?
    Thanks..
    Edited by: G-oracle on Sep 18, 2011 11:22 AM

    Can anyone help me to know how to open multiple responsibility in the same user login session in R12 ?What do you mean by open multiple responsibilities in the same session? You can only see the menu of one responsibility at a time, so how to do you expect the application to let you see multiple responsibilities/menus in one session?
    You could open another session and this way you can access more than one responsibility at the same time.
    Thanks,
    Hussein

  • How to avoid multiple session for the same username

    I need suggestions on implementing single user login , like My system has a user with a username jdavid and my application should not allow two different sessions for the same username jdavid , can one session peep into all other session
    to see if the any has a usernaem jdavid, I am basically looking for some pattern if any available for restricting multiple session for the same username . like jaas or any other security api provides this ?

    Store a Map<User, HttpSession> in application scope and let your application intercept on that. On login, just check if the User is already there, then get the associated HttpSession, invalidate it and replace it by the current HttpSession, else just store the current User-HttpSession pair in the map. On logout obviously remove the User-HttpSession pair from the map.

  • Prevent the same user login on multiple computers at the same time

    prevent the same user login on multiple computers at the same time

    Is there any way (currently running 2012 Servers) that we can prevent users from logging into multiple domain computers simultaneously with the same username?
    We still want them to log into those computers, just not simultaneously?
    LimitLogin utility not work in Windows 2012 server.
    Thanks.
    Babu
    Unfortunately Windows has never offered this feature as a built-in feature, but there are several possibilities discussed in these articles:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/0103b5e7-0db5-4fb4-bfe7-d7132983880a/limit-concurrent-logins-on-a-ws-2008-environment
    http://www.edugeek.net/forums/windows-server-2008-r2/61216-multiple-logins.html
    http://windowsitpro.com/windows/prevent-multiple-logons-gpos
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • After updating to 10.10.3, now my Macbook Pro will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?

    After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
    By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

  • Is it possible to output multiple clips from a multitrack session, at the same time?

    I'm using Audition CC 2014.2
    on Windows 7 Pro x64
    I am trying to figure out how to output several clips from a multitrack session, at the same time.
    A session like this:
    Is it possible to output 5 files right now?
    I can select each one (or even multiple) and use File > Export > Multitrack Mixdown > Selected Clips to do one at a time only.
    I'm hoping for a way to give each clip (or group of clips) a predefined filename, by perhaps using markers or something like that, which would then allow me to faster "automate" the exporting of each section into a different sound file.
    This ability would be really helpful when using a single multitrack session to generate multiple sounds and a change to globally applied effects is made and all sounds now need to be updated.
    Any ideas?

    They are, yes, but I'm also working with multitrack sessions using clips made from various different sound files.
    Ahh ok, use markers?
    So, this sort of thing isn't possible in multitrack mode then?
    If not, it sounds I'll have to "mix down" my multitrack session into a single file and set up the markers in Waveform Edit view.
    That's an extra step I'd have to do, and after editing the multitrack session, surely some markers . . . oh wait, no . . . every time I output the new mix down file from the multitrack I'd need to redo all the markers. Drat . . .
    Honestly, I am very new to Audition, but I'm about to plow into it, big-time, and I'm hoping for a nice non-destructive and fast workflow that'll enable me to output sets of sounds from the same multitrack session.
    But, it seems like this functionality is currently missing.

  • How to differentiate multiple aRFC calls into the same session.

    Hi experts,
    I have following problem:
    I start multiple aRFC calls in the same remote session by using the same task ID for each call and use
    KEEPING TASK when receiving the results.
    The calls are all of the same RFM (e.g get_status of obj), just calling parameters changes ( in the generic example, the parameter: obj).
    In the receive method, I differentiate to which obj the result is related by exporting the obj_id on success of the RFM.
    My problem is when the status call fails. I just get an error message explaining what the problem is. But I don't get the exporting parameters.
    Do you have any idea how to solve this problem?
    kind regards,
           Sahla

    This is actually the workaround I made to go on.
    Actually the underlying logic in the RFM for getting the status is based on a synchronous call, as to say when you get the exception you know of which request it comes from.
    Therefore the exception messages and their parameters are well defined and according to the error situation filled with necessary data explaining the exception situation.
    Unfortunately the excpetion class used is based on the message T100 interface and has the limitations of just four message parameters and each of 50 charcter length.
    I overwrite the last message parameter with the needed obj parameter, taking the risk to overwrite valuable system responses explaining the situation.
    I thought there could be a more elegant solution from the framework itself.
    kind regards,
         Sahla

Maybe you are looking for