LOGIC 8.0.1 with LEOPARD 10.5.1 WILL NOT LET ME SAVE//RECORD AUDIO

I get error -61 cannot save, and I have tried to save as, change record path, and nothing works. Can anyone help? I AM GETTING UPSET!!! Thank you for any advice.

i'm using Logic Pro 8.01 on my G5 PPC with NO problems while using OS 10.4.11. So, I might suggest downgrading, and waiting until Leopard runs better for the G5 when using Logic 8.
However, I'm running Logic 8.01 on my Intel Macbook with Leopard and there are NO problems, whatsoever.
The error message you're getting would seem to indicate that a path can't be found. I would remove any Logic preferences you may have established from the past and repair permissions. Without knowing how you upgraded to Leopard and how you are installing Logic 8 it's hard to troublshoot.

Similar Messages

  • My touch shows the connect to itunes with usb on screen however when i try to do so it says it cannot connect because it is locked with a passcode. It will not let me enter the code on the ipod or computer. so i cant do anything. Any ideas?

    I have tried rebooting it. nothing seems to help. it always ends up with the same screen a picture prompting me to hook up via usb to itunes.Then without fail i get an error message. itunes connpt connect to the ipod touch because it is locked with a passcode. you need to enter the passcode on the ipod touch first. unfortunately the touch will not show any other screen but the connect to itunes.

    Connect the iPod touch to your iTunes library in Recovery Mode and restore it to factory setting.  See this article for instructions on getting your device into Recovery Mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • HT201413 I have a new copmuter with Windows 8 and it will not let me sync my ipod. How do I fix that?

    I have a new computer with Windows 8 and it won;t let me sync my ipod. What do I have to do to fix it,

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I have photos that come up with a big "!" that will not let me see the photo.

    In iphoto, I am seeing a large exclamation point on some of my photos. Does anyone know what is going on?

    Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I had to get a new account on my iPhone due to some problems and now with my new account it will not let me download the same apps

    I have an Iphone 5 and i had all the apps on there that I wanted but then had to create a new account for the phone. I cant do the updates becuase of not having the same account I downloaded them on. So when I try to delete them and then get them again it says that it was already downloaded to this device and that I need to do it through my old account when that one is deleted.

    You need to copy the iTunes liubrary from your Old computer, or its Backup, to your New computer...
    See Here for one way
    iTunes: How to move your music to a new computer
    Or...
    From your Old Computer... Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Backup iTunes to an External Drive
    http://support.apple.com/kb/HT1751
    An Added Bonus is that you will then have a Backup of iTunes...

  • I just bought an adobe photoshop elements 10 program that came with the discs but it will not let me

    It won't let me load it because it wants a serial number and none of the numbers I found on the case work what do I do

    Serial number retrieval process FAQ | Point-of-sale activation products
    Mylenium

  • Cannot get Canon LIDE 220 Scanner to work with Acrobat XI Pro, Acrobat will not let scanner add pages to existing PDFs

    Hi
    I have recently purchased a Canon Scanner LIDE 220 for my new PC which has Windows 8.1 64-bit and ADOBE ACROBAT XI Professional.
    I NEED to be able to open PDF documents and add pages by using the scanner, but the scanner is not being accepted by ACROBAT. I get messages that there is no scanner connected or no driver installed. I have uploaded Canon's latest drivers for the scanner but when I try to get Acrobat to accept the scanner it says the scanner will not accept presets.
    I need some help!!
    Thanks
    Andy White

    Andy,
    Some scanners do not support presets, so when you choose an unsupported scanner from the pop-up menu, a dialog stating "This scanner does not support presets" appears. Have you tried scanning using Custom Scan through File > Create PDF from Scanner > Custom Scan..?
    Thanks
    Varinder

  • TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

    Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

    sonjadg,
    you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update  to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

  • I have a older MacBook I upgraded memory two 3 gb from its original two but it still will not let me update from snow leopard to maverick I have plenty of available ram does anyone know why

    I believe it is running an older version of maverick it is 10.6.8 but it will not let me update any further . I added 3gb of ram to upgrade from the original 2gb it came with but still no updates are being allowed Does anyone have any idea why this is ? I am sure the criteria for the upgrade is available so I don't know why I can not up date it?

    10.6.8 is Snow Leopard.
    Run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • Installed Leopard 10.5.1, Will not boot into Win XP

    I installed Leopard recently on my work laptop.
    Before it had 10.4.11 and Win XP properly working on it.
    Now after Leopard was installed, It will not boot into Win XP,
    just gives a Black Screen and never progresses past that,
    I hard reboot, and it boots fine back into Leopard.
    All software updates up until 10.5.2 have been applied,
    will applying 10.5.2 fix this issue?

    All my financial records are on the Windows side of the iMac. I've used BootCamp for more than a year, I have MacOS 10.5 (very recently updated from 10.5.1 to 10.5.2), and there has been no problem with starting Windows until today. When I restart and hold down the option key, it always boots up into the MacOS. How do I get Windows?

  • I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected.

    I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected. As well Ive deselected all the music in itunes so when I sync there will be none on my phone but itunes also ignores this request and puts purchased music back on. I do not have autofill selected. Also wondering where the backup of my iphone 4s is located on my hard disk. Any help greatly appreciated.

    Sorry thats itunes 11.5

  • Logic will not let me edit Apple Loops in the Audio Window.  Any ideas?

    When I select a blue apple loop and put it in an audio track it works perfectly but when I go to the audio window it will not let me edit the Apple Loop. A window pops up and says "The requested action can not be performed because the edited file is an Apple Loop." In the manual it says that both green and blue Apple loops can be edited but every time I try to edit an Apple Loop that window pops up. It only does this for apple loops. What can I do.

    Hi there, this is because you cannot edit apple loops, other than cutting blue loops witht he scissors. If you want to edit/alter loops bounce them down to audio files, then you can do pretty much anything..
    cheers tommy
    DUAL 2.5GHZ G5 20" CINEMA DISPLAY 2.5GB RAM   Mac OS X (10.4.3)   LOGIC 7.1.1 MOTU 828 MK2 ISIGHT BT KEYBOARD AND MOUSE

  • I have an itouch that will not let me sign in to my itunes account. The email address that it is associated with is no longer valid. I keep entering the correct password but it says that it is incorrect. I cant get a reset all of my credentials dont work.

    I have an itouch that will not let me sign in to my itunes account. The email address that it is associated with is no longer valid. I keep entering the correct password but it says that it is incorrect. I can’t get a reset all of my credentials don’t work. Now all my apps won’t work. it looks like they load for half a second then disappear. What can I do?

    - Try contacting iTunes for the password problem:
    Apple - Support - iTunes - Contact Us
    - For the other problem you can try a reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - The next standard thing to do is to download/install a new app but you cant 'do that.
    - Instead, try restoring from backup.

  • HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

    I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

    Have a look here >  http://support.apple.com/kb/TS1646

  • I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

    I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
    I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014.  I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed. 

    Hi all,
    Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
    I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
    When I compile using "javac" I get an error saying "javac" is not recognised.
    When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
    Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
    I have removed all previous references to java in the registry editor.
    Please help !
    Regards,
    Vipul

Maybe you are looking for