Logic board and third party ram upgrade on Macbook

I bought a new macbook about a month ago and the only change i made to it was to install third party ram myself. The logic board broke on Friday. Apple was kind of enough to replace the logicboard for free even though I had third party ram in there which they said violated the warranty. I called other world computing where I bought the ram and they said there was no way the ram could be the cause of the logicboard failure even if I installed the ram wrong. Is this true?
My real question is what do I do now for upgrading my ram. Do I buy mac ram and pay the extra money or can I use third party ram and not have to worry about it causing damage to my system? Whatever the resolution I don't want to void the warranty in any way.

*"which they said violated the warranty."*
What they told you there is a load of crap. Installing RAM does not void the warranty. Even the RAM that Apple installs is from a third party.
*"can I use third party ram and not have to worry about it causing damage to my system?"*
Yes

Similar Messages

  • I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with a updated graphics card ??

    I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with an updated graphics card ??

    Sounds just like what was happening with my Alum MB. I took it in and they replaced my battery. It seems to be ok now. I don't know what it is, but my battery was fine before 10.5.6 and the same timeframe of the firmware updates when they came out.
    My battery health was jumping around but was fine before all of this happened. Unfortunately at 381 cycles I don't think you have much chance of getting the battery for free. Perhaps you can complain about the battery saying it was fine until 10.5.6 or whatever. Not sure when your computer was made, but perhaps you are eligible for this program: http://www.apple.com/support/macbook_macbookpro/batteryupdate/

  • What third party RAM is equal to "1600MHz DDR3 SDRAM - 4x8GB" for the NEW, 27" 2014 4K iMAC and is it advisable to buy instead of the Apple upgraded RAM?

    What third party RAM is as good as the "1600MHz DDR3 SDRAM - 4x8GB" upgrade that Apple offers for the NEW, 27" 2014 5K iMAC Retina?
    And is it advisable to buy instead of the Apple upgraded RAM? (my understanding is that third party RAM is not as costly).

    go with one of the quality sources for ram OWC and Crucial are very well thought of
    your options with the 5K  when you buy it are
    8GB 1600MHz DDR3 SDRAM - 2x4GB
    16GB 1600MHz DDR3 SDRAM - 2x8GB [Add $200.00]
    32GB 1600MHz DDR3 SDRAM - 4x8GB [Add $600.00]
    you might  want to go with the 16GB option when you buy if you know you might want to go to 32GB some day as that will get you to 32zb at the lowest cost. or you can start with the 8 and add 8GB sticks as you need them but if you are not happy stopping at 20GB you will end up with a pair of 4GB sticks to try to sell on ebay... or if you are lazy like me you get a couple of extra xmas tree ornaments.. i have 35 years of ram methods on my tree now dating back to the extra ram for my Apple ][ extra 8k and not a few obsolete processor ornaments too... dress em up with glitter so they sparkle
    this is the owc page for ram for the 5k iMachttp://eshop.macsales.com/shop/memory/iMac/Retina-5K/DDR3L
    8.0GB PC3-12800 1600MHz SO Kit (4GB x 2) w/Lifetime Warranty
    Same Day
    $99.79
    12.0GB PC3-12800 1600MHz SO Kit (4GB + 8GB) w/Lifetime Warranty
    Same Day
    $147.50
    16GB PC3-12800 1600MHz SO Kit (8GB x 2) w/Lifetime Warranty
    Same Day
    $197.99
    32GB PC3-12800 1600MHz SO Kit (8GB x 4) w/Lifetime Warranty
    Same Day
    $395.00

  • Third Party RAM Design and Risk

    So with the Mac Pro out, my preferred RAM source, OWC (aka MacSales) stocked up on day one.
    OWC Mac Pro RAM Upgrades
    (Note the heat sink design)
    I thought "Great, they already have RAM for it, so when I eventually get one I wont have to pay the enormous amount Apple charges for some reason." But then I saw this little note on the the online Apple Store:
    Please note: Apple created a more robust thermal specification for the Mac Pro FB-DIMM heat sinks that provide more efficient cooling than many other FB-DIMMs. These FB-DIMMs require less airflow to stay cool and allow the internal fans to spin at slower speeds, improving system acoustics. FB-DIMMs made by other manufacturers that do not include a sufficient heat sink may cause the fans to run faster (and louder) or the memory chips to run slower so as not to overheat.
    And you can see what they mean by that.
    So are they saying that an FB-DIMM without a heat sink or one good enough is not approved, or that their design is most likely the only that will work well? Compare the two heat sink designs and imagine the airflow on them.
    On top of all this, Apple in general frowns upon third party RAM. When I told them my lower RAM slot has become defective, as soon as I told them the RAM was not directly from Apple, I was put in a "no sympathy bin".
    All in all, where should current and prospective Mac Pro buyers get for their RAM?

    Well, does this mean that we are better off only getting RAM from Apple for now until the third parties can extensively prove they are worthy?
    Yes and no. What I would suggest that you do, and what I have done, is to buy the minimum RAM you can get away with from Apple and then wait for the 3rd parties for the rest. Fortunately for me that was 2GB so that's what I ordered. Given I've ordered both Airport and the ATI X1900XT I have probably 4+ weeks to change that if the 3rd parties come good in time (within 2 weeks or so). Either way though I'm not really bothered as I'll probably end up going to 4GB with all 512MB FB-DIMMs.
    At some point the 3rd parties will get their heatsinks right and we'll all be in business… that you can be sure of.
    The response from both Crucial and Kingston, by pulling their product, is the perfect example of why you go with the big guys and the properly rated RAM. Buying by spec alone like many do doesn't always work out as in this case.

  • SSO :  SAPEP and third party system Web logic

    Any one implemented sso with sapEP and weblogic. Any hints will be helpful.
    Secondly In the following link (   ) I have come across different implementation procedures. I am interested in the below  said one which I am unable to access (open the link)  by any  chance if you have any documentations  related to it please forward me.
    If your backend is a Java application running on a non-SAP application server, you can insert some code into your application so it can accept the SAP logon ticket, retrieve the user id from the ticket, and grant access basing on the user id.   Tim Mullé and Stephan Boecker have discussed how to do so here.
    Thanks,
    kumar

    *"which they said violated the warranty."*
    What they told you there is a load of crap. Installing RAM does not void the warranty. Even the RAM that Apple installs is from a third party.
    *"can I use third party ram and not have to worry about it causing damage to my system?"*
    Yes

  • Does Mountain Lion checks for original hardware??  (problem with third-party ram)

    Hi all,
    I am wondering if Mountain Lion does a hardware check for original hardware. I did a RAM upgrade 6 months ago (from 2x2Gb to 2x4Gb Dolphin 1333Mhz DDR3 on a an early 2011 MacBook Pro)  and everything went smooth, I really noticed the upgraded performance.
    My problem started after a firmware update (I was running Mountain Leopard). The system became really unstable, with a lot of programs crashing randomly and some crash black screens. I then decided to update to Mountain Lion with a fresh install to solve all the problems and clean up my computer.
    I did it from a bootable USB drive using Lion Disk Maker and following these instructions with the harddrive completely formatted: How To Make A Bootable Disk Or USB Drive Of OS X Mountain Lion. The installation got stuck half way through and exited without any error message. After checking the log I got an error code (FAILED TO VERIFY ESSENTIALS PACKAGE). After diggin for a couple of days I found out in an old apple support discussion (Failed To Verify Essentials Package On Installation)  that the problem could be the non-original RAM. I then replaced the RAM with the original one and finally was able to install the new OS without problems.
    After the OS install and setting up my usual programs, I decided to go back to the upgraded RAM for extra performance and the crashes came back as before. So the newer RAM clearly caused the system to become unstable. So right now I am using the original RAM, I want to get extra RAM but not sure if it was a sporadic problem or it will happen with all the third party memories. Going to the official tecnical service will cost me more than 130€ while buying a third party RAM is around 40€. Is it really Apple  pushing us to get original parts or I am just unlucky? Did someone else experienced something similar?

    Well, the upgraded RAM worked properly for 5 months straight. I don´t think it is a problem of dirt on the contacts or improper seating. Having the RAM not working properly the same day I want to update the OS, without touching it would be too much of a coincidence I think.
    I am going to try the third party RAM again to be sure, trying to clean the contacts just in case, I will post the outcome later.

  • If I increase my laptop ram to third party ram my warranty affected or not

    Hii,
    I am Ved from India (Delhi). I have purchase Hp 2230tx laptop in Jan'2013, Its ram is 2gb thats is too low according to my usage.
    But i have 4gb extra third party ram. If I install this ram in my laptop, "MY LAPTOP WARRANTY AFFECTED OR NOT".
    Thanks in Advance
    This question was solved.
    View Solution.

    No, upgrading the RAM will not void the warranty of your notebook. The RAM you install will have it's own warranty and will not be covered by HP.
    If you have to send the notebook in for repair, they will require the original RAM be installed.

  • IMac G5 (2004) logic board and the repair extension program

    Hi,
    I know that there are tons of topics about logic board/power supply troubles witht the first generation G5s, and I'm sorry to start yet another new thread, but I still have some questions about this issue.
    I have a first generation iMac G5. Long story short...when I first got it the computer would shut itself off sometimes after I had put it to sleep. When I would try to restart nothing would happen, but usually letting it sit unplugged a while would solve the problem (occasionally when I'd restart a different start up noise would sound and the white light would flash quickly). It happened so randomly, that I just lived with it, blaming the problem on my dorm network, or a power failure. A few days ago I tried to start the computer up and nothing happened (just a VERY faint sound like a clicking or ticking or intermitant humming...definatly electrical sounding). I unplugged it overnight, but the next day still nothing. I decided to go through the troubleshooting steps Apple lists online. The internal power button could not start it up and the second LED does not flash, which according to Apple means the logic board needs replacing. Luckily my serial # is covered by the Repair Extension Program, and I'm bringing my computer in tomorrow morning to be fixed (just in time for back to school).
    I have become concerned, while browsing the discussion topics, that this fix may not be permenant. I've read a few posts that claim that they are on their third Logic Boards, and this kind of scares me. My parents bought me the computer (our family's first ever Mac) and did not purchase the AppleCare extended warranty (they had heard how reliable Macs were...hmmm.) I didn't even know that I could purchase AppleCare after-the-fact until it was several months after my 1yr warranty expired. I do appreciate the fact that Apple recognized what seems to be a common problem with this generation of iMacs, but I wonder why they did not contact the owners of these machines to let them know that the problem and repair extension even existed.
    So I guess my real question is...Does anyone know if, after this repair Apple will replace the logic board if it dies again? Is there a limit to the number of qualified repairs you can get through this Repair Extension program? Also is there any other Extended warranty type thing I can purchase after my 1yr. warranty is up.
    Sorry the post is so long...I'm just scared about the fate of my beloved Mac.
    iMac G5 (2004)   Mac OS X (10.3.9)  

    Oh man, am I actually relieved reading this thread. Just took my baby (iMac G5 first generation) in for repairs today, not knowing what was wrong with it. Luckily my serial numbers are in the range, so I'm crossing my fingers that they're going to cover this.
    Brief synopsis of what happened, in case it differs from anyone else's
    About a month ago, my iMac started to not wake up from sleep mode. Instead of waking up, it would just shut itself off. This continued for about 2 months, with me thinking nothing of it. Then, instead of shutting itself off, the computer would restart when I attempted to put it to sleep.
    Then, last night, I was surfing the net and all of a sudden the power just failed. No noise, no "grey screen", we're talking like a millisecond later the screen was black. I treid unplugging the machine and then plugging it back in while simultaneously holding the power button to reset the PSU and still nothing. At that point it was about 1:30 in the morning, so I just went to bed not wanting to deal with it until the next day. By the time I woke up, there was a distinct smell of electrical components burning (in grade 8 shop class we used to hook up resistors to the voltage generator and crank the juice up until they fried when teach wasn't around, so I distinctly remembered the acrid stench :P)
    I opened the back up and did the LED check, and #2 wouldn't even blink. So I took it in and they said they'd have to get back to me and that's where I stand now.
    The thing that concerns me is that if some of the components fried that there may be possible damage to the motherboard etc. Luckily I'm not too worried about the hard drive because it did still boot up and all. People that have experience with this, what usually happens with files on your HD after a logic board replacement? Are they usually fine?
    The other thing that concerns me is that apple has made no effort to contact me, and it will be 2 years after the purchasing date come November 1, 2006. I'm lucky that I caught this now before it was too late.

  • Third Party RAM from DMS

    Hello,
    I have been reading all the threads about third party RAM and was checking to see if anyone has had any luck with the 8GB kit from Data Memory Systems. I have had good luck with RAM from them in the past, but the Mac Pro stuff sounds like a whole new barrel of monkeys.
    This is what I have been looking at:
    8GB Kit (4 x 2GB) DDR2-667 (PC2-5300) CL5 1.8v 240 Pin ECC FBDIMM (FullyBuffered) Apple Approved
    DDR2 667MHz fully-buffered ECC Memory w/ Apple Approved Heat Sink
    This kit consists of four 2GB FBDIMMs.
    NOTE: For Apple users. These FBDIMMs use an Apple Approved Heat Sink manufactuered by Netlist. They have been tested and Approved by Apple.
    It sounds good to me, but I thought I would see if anyone has had recent experience with it before I shell out the 1800 bucks.
    Thanks!
    MacPro 2.66 4 GB RAM   Mac OS X (10.4.8)  

    Every day or two I am seeing ECC correctable errors (2) from one of the OWC 1GB DIMMs.
    With today's prices and how this is 'new territory' for most of these vendors, FBDIMMs being a small market, that while OWC's look very similar and nicely constructed - they may not be. But OWC is so close that a 3PM order gets here the next day... I decided to give their RAM a try and my business instead of Crucial this time.
    I'm sure the specs read nice. But before putting US$2,000 or something on the line...
    Not sure what the status of "correctable" errors and how concerned I should be. So I have been running Memtest to try and "hit" just that DIMM - hard.

  • Third-party RAM versus Apple RAM

    Hey everyone,
    Excuse me if this has been answered before, I did a search and didn't really find what I was looking for.
    I'm about to buy a new MBP and I would like to know how people think the quality of third-party RAM (Crucial and the like) fares against the quality of Apple RAM. As I know all of you know, I would save a couple hundred dollars going with a third-party vendor. But, almost everyone I've spoken with has told me that with RAM you "get what you pay for." Well, can anyone be more specific? What is so much better about the Apple RAM, if indeed it is that much better?
    Thanks!
    Ian

    I've just done exactly the same - new MBP with 2Gb and then bought a 4Gb kit for £50 (about $100) from Crucial. Fitted in 5 minutes, all working well. Saved around £200 ($400) against buying a 4Gb unit and still have 2 x 1Gb spare for 'future use' somewhere...
    I've always bought 3rd party RAM for my 10+ PCs over the years, never had any issue at all. Apple don't make their own memory - they buy in the chips just like everyone else.
    I love my Macs, but the obscene markup they place on RAM to catch those who are not comfortable with taking a few screws out of the Mac does irritate me.

  • Best Third Party Ram?

    What brand do you think is the best third party ram? Is there a type that works the best in your experience with the MacBook Pro?

    There is not one best.
    Apple supply Samsung, Hynix, Micron (which is also Crucial) and Nanya as standard.
    People also buy Kingston (not value ram). Other World Computing (www.macsales.com) supply Samsung and their own label ram which is guaranteed.
    Samsung is good as it has a lifetime warranty. The correct Samsung 1gb is M470T2953CZ3-CE6.
    If you are only adding one chip, I would say look to see what is already in your machine and match it if possible
    I lean towards Samsung, but Apple have supplied me machines with Samsung, Hynix, Micron and Nanya and all have worked well.
    I would be careful of other brands though, not because of quality, but compatibility.
    Cheers.

  • Knowledge Sharing -Tools ( SAP and Third Party Tools approved by SAP)

    Dear All,
    I am compiling information on Tools ( SAP and Third Party Tools approved by SAP) which are widely used in any SAP Project ( Implementaion, Roll-out, Support, Maintenance, Upgrade etc) .
    Tools will be categorized on the basis of following parameters:
    a) Tools Provided by SAP
    b) Third Party Tools approved by SAP
    In both a) and b) we can have following categories:
    1) Project Tracker Tools-Remedy
    2) Module specific Tools-Tools used for SD, FI, MM, BW etc.
    3) Reporting Tools
    4) Tools from SAP
    5) Data migration related Tools ( Extraction, uploading, downloading)
    6) Generic Scenario tools ( Tools for Effort Estimation etc.)
    7) Performance Enhancement and Optimization Tools
    Request you all to please contribute and share your knowledge and experiences (theoretical and practical).
    Regards,
    Rakesh

    Hi,
    I think that you can start with SAP Solution Manager. It is really interesting tool.
    Cheers

  • Rooting and Third Party (non-Lenovo) ROMs

    If you wish to discuss Rooting and Third Party non-Lenovo ROMs please visit the Android Ecosystem Developers board;
    https://forums.lenovo.com/t5/Android-Ecosystem-Developers/bd-p/Developer_Android

    Links to 2 other threads on this same page:
    http://discussions.apple.com/thread.jspa?threadID=386060&tstart=0
    http://discussions.apple.com/thread.jspa?threadID=362069&tstart=0
    I encourage you to read the threads just a bit before posting, thanks.

  • Mid 2009 applecare logic board and battery ADVICE

    returning mac OS and mac hardware buyer here.
    i have been questioning (read complaining) about the battery life (1 1/2 hours on safari) and the performance (spinning beachballs on startup, on wake and on starting safari among other things) since i bought this machine. i brought it in for the umpteenth time to the genius bar (they apparently only have 3 of these on record?!) because i had a break and i have a "service battery" alert.
    i am being told i can replace the battery and the logic board based upon their diagnostics of the machine and i have FINALLY (Whoo-HOOO yippeee kayeeee'y!!) got a committment from a mac rep that i should be expecting  3 1/2 - 4 hours out of the battery and not 1 1/2 hours.
    i don't really have an option here from everything i can tell but does anyone have any advice for me on this? warranty is up in February and from what i am being told i can bring it back if i bring it home and still only get poor battery life.
    at the same time i am really unhappy (insert expletive) about having spent so much time troubleshooting this machine only to be told that the hardware seems fine or that the battery tests normal or whatever. this macbook pro 13 inch seems like it was a dog since the day i bought it.
    my preference would REALLYT be to trade into mac on a new macbook pro 15" and i am wondering if i am instead i am going to have to just repair this machine (thank my lucky stars that i buy applecare) and empirically test the machine on my end to make sure that i am getting more than 2 hours per charge and that i don't have the spinning beachballs that i have had to have dealt with over the last 3 years...
    i mean, i /have/ to fix this machine and monitor it over the next three months instead of them helping me cut bait with it by getting some financial incentive somehow to move into a new MBP is that right...?
    TIA

    thanks.
    looks like it has now had a new battery and a new logic board and it is still failing hardware test for the battery.
    they are now sending it out for additional testing to some other facility.
    anyone had a similar experience?

  • Having logic board and inverter replaced - will post results.

    My MBP is afflicted with the CPU whine and the LCD whine, not to mention the "Moo". I solved the Airport not connecting automatically issue on my own.
    Talked to Apple about the whines, they wanted me to take it to the local guys, which I was happy to do. I dropped it off this morning, going to pick it up after work.
    They are ordering me a replacement logic board, and the inverter (at my request). I will keep my MBP until they come in and then they will swap the new parts in.
    I'm guessing it won't be a short wait for the parts, but I will follow up in this thread detailing further results and noise levels.
    Personally, I am very impressed with the local service response. They agreed to get the inverter at my request even after opening it up and finding the noise to all eb coming from the logic board.
    I know it ***** to wait... but there is more to come. Any questions about my specific machine, etc; post and I will answer.

    BrenM - Good luck with your MBP! I hope the replacement logic board and inverter resolve the issues.
    As for me, my MBP has been at an Apple Authorized Service Provider in Oakville, Ontario for about a week and a half. They first ordered a replacement logic board, which came from California ... took 2 or 3 days. Unfortunately the replacement logic board did not resolve the high-pitched "whine" issue. The tech told me it is quieter, but not gone .... So on Monday he advised me that they are replacing the inverter, which is on order. They expect to receive it on Wednesday. To be honest, I don't think the inverter will address the high-pitched "whine", as I've been following this issue on here very closely. But it probably will resolve the buzz from the screen when adjusting the brightness, so that's good.
    The ASP that I took my MBP to in Oakville has been great. They're really on the ball with it and I know they are doing the best they can. But what it really comes down to is ... if Apple doesn't have an issue to this high-pitched "whine", there's not much the ASP can do. I appreciate them replacing the logic board and inverter, but it's really Apple that needs to get their act in gear and resolve this once and for all. The MBP's have been out for what ... 5-6 weeks now? This has been a hot topic ever since people starting receiving their MBP's, and Apple needs to face the fact that people are not going to let this go until a solution is provided.
    The ASP told me that if after replacing the inverter it is still not resolved, I'll need to put up with it until Apple resolves the issue, as there's nothing else they can do. I asked him - what if it takes Apple 2-3 months to resolve the issue? He said I can bring it right back in to have it fixed. So that's good.
    The other thing I was considering is when I get my MBP back, to contact Customer Relations and put up a fuss to receive a replacement. But ... then the replacement will probably have the high-pitched "whine". I don't know what to do at this point. It sort of bothers me that my $3000 MBP is no longer pristine, as it has been serviced and received replacement parts ... what do you guys think? Should i be firm with customer relations and (politely) demand a repacement?

Maybe you are looking for

  • Resolution issue with macbook pro 13 (late 2013) and dell u2711

    I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution. Last we

  • Info Structure S031 - Information on movement type categories

    How can I find out the movement type categories for the S031 info structure? For instance what movement types add to the "Goods receipt" total or the "Goods issue" total.   Also, how do you "switch off the updating process for specific, individual mo

  • No Booting of Windows 8.1 After GPT Partition Resizing with Easeus Partition Master 3.0

    Hi there, I have a Sony Notebook SVS13A3Z9ES with preinstalled Windows 8 which I updated to Windows 8.1. The notebook has a 250GB SSD which had the following GPT partitions Partition 1: SONYSYS - 260MB (Sony Vaio tools, type OEM) Partition 2: Windows

  • PCI card

    I have a PCI card in my old G4 power mac. When I tried to fit it in my newer mac, which is a powermac g5 - the card doesn't appear to fit. It's a PCI card, but the little notch is in the slot to put it in. Is there any cure? This is a Delta 66 - enab

  • CS5 R3D Timecode Issues

    I am interested to know if anyone has had this issue before, and if so, what they did to resolve it. I have R3D footage shot at 23.976 fps. When I import the clip into CS5 the timecode does not match. (see screenshot below) When I import the clip int