Logic changes start point of song when cycle mode recording.

If I hit a note partially before (or hold onto a note longer than the cycle end point) the start and cycle point an extra bar is added to the beginning. Say I have the start point at 1, the start point will change to 0. Is there any way around this?

This happens if I start on bar 2 as well.

Similar Messages

Shuffle always starts at same song when I turn it on (1st gen)

My Shuffle always starts at same song when I turn it on, even if I have it set to the shuffle setting. In other words, everytime I press play on my shuffle, the same song starts as the lprevious time I started the shuffle.
Is there a way to change that?

I haven't tried restoring it yet. I thought there
might be some trick or button combination to reset
that.
Nope.
What are the 5 R's?
http://docs.info.apple.com/article.html?artnum=303940

Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?

Why do I have to change source input to mono when it's recorded in stereo through my interface from an acoustic pick up in order to hear anything in playback?
It's a dean markley acoustic pick up with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.

Watts100woo wrote:
with a mono 1/4" jack. It's plugged into a focusrite interface. GarageBand only records it in stereo and only plays it back in mono.
you appear to already know the answer, however...
GB is not recording it in stereo, nor could it
the short story:
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)
the long story:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqstereovsmono
(Let the page FULLY load. The link to your answer is at the top of your screen)

"Scratch" Playback sound at the start of songs/when cycling through menus

Yesterday I decided to activate genius on my new laptop. Today, I noticed a "scratching" noise appear in the first few sconds of playback, and when cycling through the menus, (from music to itunes store, to ipod, etc.). After looking at some of the discussions here, and deciding my problem wasnt being covered, I tried a couple things and managed to sort this out personally:
Simply:
1) Open windows sound manager.
2) Scroll down to find itunes - "page load complete".
3) Test sound to ensure it's the scratching sound corrupting playback.
4) Set sound to "none".
5) Apply changes.
I then realised some people may not consider this solution, so posted it up here.
hope this helps.
Scott

It's usually from 3rd party VI's not clearing the buffer from a previous note when bouncing.
Yes it's still in L8.
I leave a few bars of blank space at the beginning and before I bounce while the seq is still playing, I manually keep looping those blank bars by clicking the playhead at bar 1 BEFORE it starts to play the track again. When I don't hear anymore ring out, I bounce.
Seems kinda silly, but that's what works. I was really hoping they'd fix this or not let the plugins pass the AU exam if they can't clear the buffers. That would motivate the 3rd parties to update pretty quick if that really is the problem.

Losing Preview files when changing start point

The way I always like to work is to select raw clips from my footage, then applying all the effects I want to do on them, render and then fine tune the in and out points of the clips, to fit the music I set it to. In previous projects this worked and I could just slide the end and start points of the clips on my timeline without having to render again. But with my current project I can change the out point of my clip, but as soon as I slide the beginning of my clip I lose the preview file. This is a really ineffective way of working. I hope somebody knows a setting that will prevent this. My sequences are PAL 16:9 25 progressive and I use 50P (deinterlaced) PAL footage and some 25P After Effects compositions.
Thanks for the help!

The way I always like to work is to select raw clips from my footage, then applying all the effects I want to do on them, render and then fine tune the in and out points of the clips, to fit the music I set it to. In previous projects this worked and I could just slide the end and start points of the clips on my timeline without having to render again. But with my current project I can change the out point of my clip, but as soon as I slide the beginning of my clip I lose the preview file. This is a really ineffective way of working. I hope somebody knows a setting that will prevent this. My sequences are PAL 16:9 25 progressive and I use 50P (deinterlaced) PAL footage and some 25P After Effects compositions.
Thanks for the help!

Custom starting point for song?

I'm wondering if it's possible to set a custom starting point for a song, similar to the way that the end point can be set:
I find that I have to start my song about two measures in (I tend to need more time than the Count In setting allows), but when I go to share the song, I don't want those first two measures. Short of highlighting all tracks and dragging them left when I'm done, is there another way to set a custom start?
Thanks!
Andrew

theolog wrote:
when I go to share the song, I don't want those first two measures
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

Get instantly the coordinate of end and start point of line, when moving it

hello guys,
i'm just wondering on how to get the coordinate of Start and End point of a line when I'm using PathWrangler wrangler = new PathWrangler(this); this latter allows the paint components to be dragged, so i want to get instantly the coordinate of the Start and End point of the line.
MY AIM IS: i want whenver an intersection between 2 lines occur( the line is being dragged so intersection may occur between the two lines) i want to draw a circle having as center the intersection of the 2 lines.
i managed to write a code that draws 2 lines and a circle having a center the intersection of both lines. here is the code:
import java.awt.*;
    import java.awt.event.*;
    import java.awt.geom.*;
    import java.util.*;
    import java.util.List;
    import javax.swing.*;
    import javax.swing.event.MouseInputAdapter;
    public class SDRx extends JPanel {
       List<Path2D.Double> paths = new ArrayList<Path2D.Double>();
       PathWrangler wrangler = new PathWrangler(this);
       Point p1= new Point(120,150);
       Point p2= new Point(140,210);
       Point p3= new Point(120,150);
       Point p4= new Point(110,230);
        Line2D.Double l1=new Line2D.Double(p1,p2);
       Line2D.Double l2=new Line2D.Double(p3,p4);
        Point2D.Double inter= intersection(l1.getX1(),l1.getY1(),l1.getX2(),l1.getY2(),l2.getX1(),l2.getY1(),l2.getX2(),l2.getY2());
       Ellipse2D.Double ell= new Ellipse2D.Double(inter.getX()-25,inter.getY()-25,50,50);
       public SDRx() {
           paths.add(wrap(l1));
           paths.add(wrap(l2));
           paths.add(wrap(ell));
       private Path2D.Double wrap(Shape s) {
           return new Path2D.Double(s);
       protected void paintComponent(Graphics g) {
           super.paintComponent(g);
           Graphics2D g2 = (Graphics2D)g;
           g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                               RenderingHints.VALUE_ANTIALIAS_ON);
           g2.setPaint(Color.blue);
           for(int j = 0; j < paths.size(); j++) {
               g2.draw(paths.get(j));
       public void transformPath(Path2D.Double path, AffineTransform at) {
           path.transform(at);
           repaint();
        public Point2D.Double intersection(double x1,double y1,double x2,double y2, double x3, double y3, double x4,double y4) {
      double d = (x1-x2)*(y3-y4) - (y1-y2)*(x3-x4);
      if (d == 0) return null;
      double xi = ((x3-x4)*(x1*y2-y1*x2)-(x1-x2)*(x3*y4-y3*x4))/d;
      double yi = ((y3-y4)*(x1*y2-y1*x2)-(y1-y2)*(x3*y4-y3*x4))/d;
    return new Point2D.Double(xi,yi);
       public static void main(String[] args) {
           JFrame f = new JFrame();
           f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
           f.add(new SDRx());
           f.setSize(400,400);
           f.setLocation(100,100);
           f.setVisible(true);
   }any help is appreciated.
10x

OK guys i'm sorry for before i said few wrong things about PathWrangler wrangler = new PathWrangler(this); i thought it was in the java library.
anyway here is the full code( i got it few weeks ago(with few modidfication) from somwhere, u can google it)
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.geom.*;
    import java.util.*;
    import java.util.List;
    import javax.swing.*;
    import javax.swing.event.MouseInputAdapter;
    public class SDRx extends JPanel {
       List<Path2D.Double> paths = new ArrayList<Path2D.Double>();
       PathWrangler wrangler = new PathWrangler(this);
       Point p1= new Point(120,150);
       Point p2= new Point(140,210);
       Point p3= new Point(120,150);
       Point p4= new Point(110,230);
        Line2D.Double l1=new Line2D.Double(p1,p2);
       Line2D.Double l2=new Line2D.Double(p3,p4);
        Point2D.Double inter= intersection(l1.getX1(),l1.getY1(),l1.getX2(),l1.getY2(),l2.getX1(),l2.getY1(),l2.getX2(),l2.getY2());
       Ellipse2D.Double ell= new Ellipse2D.Double(inter.getX()-25,inter.getY()-25,50,50);
       public SDRx() {
           paths.add(wrap(l1));
           paths.add(wrap(l2));
           paths.add(wrap(ell));
       private Path2D.Double wrap(Shape s) {
           return new Path2D.Double(s);
       protected void paintComponent(Graphics g) {
           super.paintComponent(g);
           Graphics2D g2 = (Graphics2D)g;
           g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                               RenderingHints.VALUE_ANTIALIAS_ON);
           g2.setPaint(Color.blue);
           for(int j = 0; j < paths.size(); j++) {
               g2.draw(paths.get(j));
       public void transformPath(Path2D.Double path, AffineTransform at) {
           path.transform(at);
           repaint();
        public Point2D.Double intersection(double x1,double y1,double x2,double y2, double x3, double y3, double x4,double y4) {
      double d = (x1-x2)*(y3-y4) - (y1-y2)*(x3-x4);
      if (d == 0) return null;
      double xi = ((x3-x4)*(x1*y2-y1*x2)-(x1-x2)*(x3*y4-y3*x4))/d;
      double yi = ((y3-y4)*(x1*y2-y1*x2)-(y1-y2)*(x3*y4-y3*x4))/d;
    return new Point2D.Double(xi,yi);
       public static void main(String[] args) {
           JFrame f = new JFrame();
           f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
           f.add(new SDRx());
           f.setSize(400,400);
           f.setLocation(100,100);
           f.setVisible(true);
   class PathWrangler extends MouseInputAdapter {
       SDRx component;
       AffineTransform at = new AffineTransform();
       final int S = 6;
       Rectangle net = new Rectangle(S, S);
       Path2D.Double selectedPath;
       Point offset = new Point();
       boolean dragging = false;
       public PathWrangler(SDRx sdr) {
           component = sdr;
           component.addMouseListener(this);
           component.addMouseMotionListener(this);
       public void mousePressed(MouseEvent e) {
           Point p = e.getPoint();
           net.setLocation(p.x-S/2, p.y-S/2);
           List<Path2D.Double> list = component.paths;
           for(int j = 0; j < list.size(); j++) {
               Path2D.Double path = list.get(j);
               // Use the contains method to detect RectangluarShapes
               // and the intersects method with net to detect lines.
              if(path.contains(p) || path.intersects(net)) {
                   selectedPath = path;
                   Rectangle r = selectedPath.getBounds();
                   offset.x = p.x - r.x;
                   offset.y = p.y - r.y;
                   dragging = true;
                   break;
       public void mouseReleased(MouseEvent e) {
           dragging = false;
       public void mouseDragged(MouseEvent e) {
           if(dragging) {
               int x = e.getX() - offset.x;
               int y = e.getY() - offset.y;
               Rectangle r = selectedPath.getBounds();
               at.setToTranslation(x-r.x, y-r.y);
               component.transformPath(selectedPath, at);
   } 10x

How to change starting size on screen when opening jpg

When our photographer browses his folders with pictures and double clicks upon one of them (jpg-files always), his Photoshop (he uses CS3 and Windows NT) always opens up the file only shoving it as 16,3% size (or such, I can't remember the exact number)
As a result the picture hardly fills 1/4 or 1/8 of the available space in the Photoshop screen, and he always has to click the picture larger before being able to work in it.
He has recently got a new - and more powerful - computer, and he did not have the same problem when using the old computer, here his files always opened to the maximum possible size.
As he regards me as something of a computer wizard he has turned to me for help, but I am not able to find any place to specify the settings for this.
I hope somebody can help me, and please excuse my bad English, I am Danish...
Best wishes from Denmark, Susanne

I use a couple of actions to automatically size the image when opening a document. One for Fit to Screen and one for Actual Pixels (100%). I then use the Script Events Manager in the Scripts Menu to call which ever one I want to use.
Here is a link to a screen shot of the Script Events Manager dialog with my Fit to Screen Action being called to run when I open a document.
Not sure if the forum accepts html at the moment. but the URL should be in there somewhere if it doesn't.
[URL=http://www.pixentral.com/show.php?picture=1u8w0A6rUcWkHLy2IeJSbKETvmvxnY][IMG]http:// www.pixentral.com/hosted/1u8w0A6rUcWkHLy2IeJSbKETvmvxnY_thumb.jpg[/IMG][/URL]

Logic Pro 7 & Reason 3.0 - Cycle Mode Sync

Hi Forum,
I am using Logic Pro 7 and reason 3.0 simultaniously via rewire. I am having a problem when playing back a song in cycle mode.
I select a section (let's say bars 1 - 8) to loop in cycle mode, but when I play the selected section it does not loop smoothly. When the SPL reaches the end of the cycle selection point (end of bar 8) and proceeds to start at bar 1 again, I hear a skip in the audio. It does not loop perfectly like I want it to.
Can someone please suggest why this is occuring and how I could correct this problem so that it loops smoothly and perfectly?
Thank you.

here ya go
http://docs.info.apple.com/article.html?artnum=300040

What is Cycle mode?

The "get started" part of Logic Express 8 says to "turn off Cycle mode if it is enabled" and then doesn't bother to explain what that is or how to do it. It doesn't say why it is, either. Well, what is it and how do I turn it off...why do I want to turn it off? I need to know about Cycle mode, however, because when I record something the phrase keeps repeating. How do I turn it off? All I want is simple multi-tracking. All these "features" are presently getting in the way. Someday I'm sure I'll appreciate them, but right now I just want to record real instruments totally dry, one at a time. Think 1978 and you get the picture. I'll get to the 21st century eventually, but not right now! Thanks in advance.
MGuilfoile

Unless you want to record multiple takes or have your phrase repeat itself then you need to disable cycle mode by going down to the right side of the transport bar at the bottom of the arrange window. The second button over on the right side that looks like two arrows going around an ellipse is the cycle mode button that you want to turn off.

Shuffle starts on same song on playlist when switched on, can I change this

Does anyone know how to set it so it starts at the song i was last listening to when the shuffle was switched on and not the same song each time I switch on my shuffle without using my shuffle function?

On the Ipod's Settings page, shuffle is off. I use a cassette adapter in my car. As soon as the ipod connects, it starts playing the first song. I still can't figure out how to set a default song or playlist. Thanks for your help.
MacBook Mac OS X (10.4.9)

The new tab behavior is driving me nuts. It keeps re-centering on tabs nearest the start of the list when I move a tab. How do I change this?

The new tab behavior is driving me nuts. It keeps re-centering on tabs nearest the start of the list when I move a tab. How do I change this?
I don't want to download an app. I would rather add a new string in about config or just change of the ones in there to false. It's making my work life rather difficult, to be forced to go all the way back to the end of my list after moving one tab just to have to do it again. I mean it's to the point where I might consider changing browsers if they had tab scroll bars.
Edit: At this point I will download any app. Please make this stupid feature stop.

The result of setting up that code will do exactly as you described: the tabs will be crowded together. I had not noticed any change in behaviour of Firefox with tabs because all the tabs are crowded together, so they cannot scroll, and I very seldom move tabs.

Changing the Media Start point

So I just had a hard drive crash on me and I did not have back-ups of my footage. It's not to bad because I have back-ups of the project file I was working on. So all I was going to do is a Batch Capture to reconnect all of my clips. Only problem is the person I had capture the footage did not leave enough pre-roll when they did a capture now. So now when it tries to re-capture it says "Cannot locate specified timecode"
This is because there is not enough pro-roll on the clip to allow it to batch capture. When I look at the Media Start in the browser window for the clip it says it starts at 00:00:02:31. I need to change this to a later start so it does not try to roll the tape so far back. So.....
How do I change the Media Start Point???
Thanks

Ok, I am following you, I just need to make sure the clips in the edited timeline reconnect with the old master clip.
I could keep the old offline master clip and just make it reconnect to the new captured clip. But will this make all of my already edited clips in my sequence that are looking at the old master clip off by however many seconds I had to reset the in-point to get the tape re-captured?
Thanks for the tip on dragging clips to the L&C window, I did not know you could do that.

Change start of cycle date in maintenance plan

Dear Experts,
We would like to change start of cycle date in maintenance plan. Iwe have rescheduled the plan but the start of cycle date remains the same.
could you please confirm, whether it can be changed. The requirement is because of some Mt plan created with future start date in production (Year-2020) and we want to correct the same.
Thanks

Don,
To determine the next maintenance call date you need to tell the system when the last maintenance call occured
Example:
You want the next call date on the 1 June based on a six month cycle. Therefore the last maintenance date would have been 1 January (assuming key date scheduling).
In your case you need to RESTART your single-cycle plan on the 1 January and the system then calculates the next maintenance calls.
PeteA

I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD. Files can sometimes go bad and become corrupted. As to how or why that happens, there are a number of ways.
What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
iTunes: How to convert a song to a different file format
B-rock

Logic changes start point of song when cycle mode recording.

Similar Messages

Maybe you are looking for