Logical component in SolMan using SMSY

Hi,
What is a logical component and why is it necessary. Why do we create that in our solman system for the landscape.
Also i was going through one tutor in rkt-solman link for creating logical component. It shows for a r/3 system. Is the same selection valid for the Netweaver component also.
Help required and shall be appreciated as well.

Hi,
First of all thanks for the reply.
One thing is while i create a new system with assistant, and select the product as netweaver and proceed it asks me to select the main instance. What is this main instance. Say for me the system i am adding is the one having J2ee engine and portal plus trex on it. It doesnot have the ABAP instance. So what should be my selection. Should it be only WebAS Java or java + portal + trex.
Secondly what i did was i selected java and EP and Trex and proceeded. It didn't give me the option of entering the System Number and Message Server. In the next screen the only option i had was to assign logical component. If i select the box then it asks for client but the box for client is disabled.
Don't know what to do. Also RFC anyway is required. In such a case what should be the case. How should i create those RFC's and what RFC's are required for the same.
Lot of questions. Hope to get the detailed reply.
Answers will be rewarded nicely.
Thanks

Similar Messages

Creating Logical Component in Solman 7.1

Hi,
I want to create a Logical component for my SAP ECC managed system, could you please let me knowhow to create it.
OR is there any standard SAP document available on how to create Logical component in Solman 7.1 SP10.
Regards
P Kumar

hI kUMAR,
Check in SOLMAN 7.1 master guide which is available in SAP marketplace.
You can try below for creating logical component in SOLMAN:
1)Make sure that managed system has correct details in LMDB (like product components,version...etc)
2)Go to SMSY-->click on logical components in left hand side-->search for your product version i.e ERP 6.0 or Netweaver 7.0 or SCM etc.
3)Expand ERP 6.0 (in ur case)-->right click -->create logical system-->Give logical system name and version details-->Save
4)After that select systems i.e Dev system ,QUA system,PROD system of your ECC ,Then save
Thanks,
Prakash

Logical component cannot be used in project

HI
after i add logical component in solar_project_admin
i try to check system landscape
and i get error "Logical component SAP_ERP_EHP_ABAP_EHP4 is not used in project (the name of the project)"
i used in 2 different logical component in this project
you now whay?
best regards
Naor

I am receiving this message right now, while conducting prototype testing.
Message no. SOLAR_SPROJECT055 - Logical component Z_CHARM_PT is not used in project CHARM_PT01
I used this logical component in a previous solman project and it worked. Now I have closed that project and am trying to create a new one using the same logical component.
Any help or suggestions are appreciated. Thanks.

Which SAP Product version to assign to a Logical Component in SMSY (SOLMAN)

Dear SAP Colleagues,
In our SAP environment, we do have 2 versions of ERP systems :
1. CON - SIF - CDP systems are 'SAP ERP Central Component 5.0' product version.
2. CDD - CDT - CDP systems are 'SAP ECC 6.0' product version.
Question :
When I want to assign these systems to a Z_LOGICAL_COMPONENTS, which product version do I have to choose ?
Example for CON - SIF - CDP systems :
1. They are 'SAP ERP Central Component 5.0' product version.
2. In SMSY in our SOLMAN system, logical component are created using
'SAP ECC 5.0' product version.
Example for CDD - CDT - CDP systems :
1. They are 'SAP ECC 6.0' product version.
2. In SMSY in our SOLMAN system, logical component are created using
'SAP ECC 6.0' product version.
Question :
What about 'SAP ERP 2004' and 'SAP ERP 6.0' product version ?
In which case must I use this product version to assign CON-SIF-CPS
or CDD-CDT-CDP to new Logical components ?
Are they OSS Note or any matrix which give me the right product version to choose ?
I have heard that 'SAP ECC x.x' product version should not used any longer ?
Thanks
Best regards
P.C

Hi,
Read the following document, the mapping for systems and component versions is described in here:
https://websmp202.sap-ag.de/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf
For ECC 6.0 you should select ERP 6.0
regards,
Jaap

Setting Logical component for Test Case.

Hello,
I've created test case in SOLAR02 and I want to link my test case to Quality Assurance in my logical component (SAP ECC).How can i set this link? Now the test cases are link to Developement system in SAP ECC. Please tell me how can i fix it.

Hi,
If you want to perform the testing in QA client, set your system role as "Quality system" in STWB_2 transaction.
By default, the system role has to come as "Quality system".
If it is not check your transport route of the logical component in t.code SMSY.
Regards
Senthil

Logical Component after upgrade

Hi,
I have slight confusion.
We upgraded our SCM system from SCM 7.0 to SCM 7.01 (Ehp1). now our product version is "EHP1 FOR SAP SCM 7.0"
and Product instance is "SAP SCM ENHANCE PACKAGE"
in logical component which is used in Charm and monitoring.
following are the current details
logical componenet: Z_SCM
Product/Prod. Instance SAP SCM [SCM Server]
product version: SAP SCM 7.0
Now i want the correct assignment of logical component which includes product version and product instance.
How do I get same logical component name with new product instance, so that my charm and monitoring is not affected.
Its same case for PI. from SAP netweaver PI(7.11) to SAP Netweaver (7.3)
BR,
Shyam

Hello Shyam,
Sorry, you are correct, the logical template needs to be copied from a system group and SAP SCM 7.0 and SAP SCM 7.0 EHP
are in different system groups, and you won't be able to pick up your SCM 7.0 systems in the SCM 7.0 EHP logical.
What might be possible, and I don't know if it would be practical is to retire Logical Z_SCM that was based on SCM 7.0, and by retire I mean remove, and then create the same nameed Logical Z_SCM but copied from the template of SCM 7.0 EHP, then you could see your SCM 7.0 EHP systems and pull them into the new logical Z_SCM and add that back to the solution.
I have not tried this, but if you have a test environment you could try this to see. Logically it should work. Its certainly something you could prove or disprove on a test system.
Regards,
Paul

Error: The logical component X is still being used

Hi,
In Transaction SMSY, i want to delete a Logical Component. So, pre-condition is to check whether it is mapped to any Projects/Solutions. By right-clicking - Where used list , i have seen that it is mapped to a Project. So, in transaction SOLAR_PROJECT_ADMIN under tab System Landscape, i tried to delete the Logical Component but receiving the error message - The logical component X is still being used.
Please help.
Many Thanks,
Mohan.

Hello Mohan,
You can also solve this by using the "Replace Logical Component" button in the system landscape within SOLAR_PROJECT_ADMIN.
Thus you can replace all the occurances of the Z_ logical component by e.g. an existing standard SAP logical component.
Afterwards you will be able to delete your Z_ logical component in SMSY (or in LMDB from 7.1 SP9 on).
Best regards,
Peter

Logical Component Assignment : Use '_' as a separator

Hi experts,
I can not assign a system to a logical component in SMSY.
I tried to assign an SRM 7 system to logical component : "SAP SRM EBP-SRM SERVER" and then I get error message : "Use '_' as a separator".
Any idea to sort this out?
Where could I manage logical component name?
Many thanks in advance.

Hello there,
Does the logical component you mention have any systems already assigned? I would guess that it doesn't and that it is one of the logical components already present when Solution Manager is installed.
Have you tried creating a new logical component?
Best regards,
Miguel Ariñ

Managing more than one logical component in SMSY Current System Assignments

Hi,
I have a problem with managing logical components in TA SMSY in my Solution Manager System, in the section "System Groups and logical Components". I want to maintain more than one logical System e. g. from Type Application Server ABAP --> SAP NETWEAVER APPLICATION SERV.
That means e. g. i want to maintain 2 or more Demo Systems from different Servers or Instances of the same Product Version in the same logical Component .
What I want to know is, is there a way to display these logical components in tne "Current System Assignments" - View in that form
Logical Component is e.g. : SAP NETWEAVER APPLICATION SERV
product/main instance is   : SAP NETWEAVER [Application Server ABAP]
Product Version | Development System | Demo System | Training System | Production System | ...
|--|||--
|
SAP NW 7.0        |                                         | ZB1: 100           |                               |                                     |
|--|||--
|
SAP NW 7.0        |                                         | ZB2: 800           |                               |                                     | ...
Thanks beforehand for your help.
Greets C. Peifer
Edited by: Carsten Peifer on Dec 15, 2008 4:03 PM

Thanks for your quick answer,
but i have to say, that this is not exactly what i've been lookin for.
What I need in my System Landscape is to have each demosystem as a logical Component from the same type (e.g. SAP NETWEAVER APPLICATION SERVER ABAP).
So that in Change Management in a Maintenance Optimizer Transaction i can choose between each demo system in my System Landscape (from the type SAP Netweaver Application Server ABAP) that i will maintain in Maintenance Optimizer, e.g. download a new SP Stack.
My Intention is to create new logical components from type SAP NETWEAVER APPLICATION SERVER ABAP in my Namespace e.g. ZSAPNW01, ZSAPNW02, ... and to maintain the types of systems (Demo, Development, Training etc ...) for each logical component.
Is this the only Possibility?
Or do i can also display my logical components the way i descriped beyond?
>
Product Version | Development System | Demo System | Training System | Production System | ...
|--|||--
|
SAP NW 7.0 | | ZB1: 100 | | |
|--|||--
|
SAP NW 7.0 | | ZB2: 800 | | | ...

Problem to assign my SolMan 7.1 in the corresponding logical component

Hello,
I am running SolMan 7.1 SPS 11.
I would like to assign my SolManSID to the logical component SAP Solution Manager 7.1.
I perform the following.
SM_Workcenter
-> Solution Manager Administration
-> Landscape
-> Logical Component
-> Search *manager*
The only Logical Component that is returned is SAP SOLUTION MANAGER 7.0 EHP 1.
There is no SAP SOLUTION MANAGER 7.1.
Therefore how should I proceed to add my SolManSID to the logical component SAP Solution Manager 7.1?
Regards,

Hello,
Prav D wrote:
Hi,
Check sapnote : 1850819
Also go through following url :
http://scn.sap.com/docs/DOC-49413
http://help.sap.com/saphelp_sm71_sp10/helpdata/en/7a/96449e84b74121a323dcfdc8e2a7be/content.htm?frameset=/en/7a/96449e84b74121a323dcfdc8e2a7be/frameset.htm&current_toc=/en/35/2cdf53fec54bcbb0146f6f8f5ad408/plain.htm&node_id=27
Thanks & regards,
Prav
1. SAP Note 1850819 was read but nothing helped me solving my problem.
2. DIc-49413 does not apply has I would like to make a new assignment.
3. Even after reading the help I could not make my assignment. The only proposed logical component does not contain Solution Manager 7.1
as I have described above.
Please answer my question or provide me the exact sequences to perform if you would like to help me.
Regards,

Smsy logical component

Hi,
I am trying to configure maintenance optimizer .
1. How I can define the logical system ?
2. how to define client in logical system ?
3. how to delete logical system if it is wrongly define ?
4. I have gone through so many mopz doc but big cofusion to configure smsy . pl. help .
if you hava any thing step by step . it will be greate help .
5. how i can confirm that now maintenance optimizer is configured and working perfectly ?
pl. suggest .

1.Adding SAP-systems to abap stack of solution manager
a.t-code SMSY-->Ladscape Components(add server document,database document,SAP-system document)
b.Generate RFC destination for user for READ ACCESS and CHANGE manager from solution manager to SAP-system you have added
2.Publishing solution
a.t-code DSWP -->Create Solution
b.Create logical system and assign to project in SMSY-->System group and Logical component
Regards
Ganesh

XI 3.0 and BW 3.5 system type/logical component in Solution Manager

We are in the process of performing an upgrade for ERP 2004, XI 3.0 and BW 3.5. Initially this is being done in the sandpits. All systems are configured and connected our Solution Manager to download the packages.
We are unable to determine what type of system the XI 3.0 and BW 3.5 should be configured under. For example, previously we had an issue where ERP was configured as ECC 5.0 rather than ERP 2004. This was causing an issue in MOPZ where the upgrade option wasn't visible in a maintenance transaction. The same issue is now happening for XI and BW.
Please advise on the system type (logical component to use) for XI 3.0 and BW 3.5 in Solution Manager as SAP have made it very confusing. Currently both are under type Netweaver 04.
Regards,
-Rohan

Hi
I believe that SAP hasn't upgrade option for BW 3.5, Check link:
https://service.sap.com/solman-mopz
Upgrade
a "straight" upgrade for SAP Business Suite (upgrade from SAP ERP 2004 to SAP ERP 6.0, for example) is not supported by Maintenance Optimizer
Upgrade with an Installation of an Enhancement Package is supported for SAP ERP, SAP SCM, SAP SRM and SAP CRM
Regards
William Neira

How To create a maintenance project - logical component missing?

Hi experts,
we plan to activate ChaRM in our Landscape.
We don't have created a maintenance project in solution_manager cause there is a logical component missing.
I followed the instructions of the tutorial on https://websmp206.sap-ag.de/~sapidb/011000358700006932702005E.sim (Creation of a maintenance project).
I recognized there is the logical component "ZCHANGE REQUEST MANAGEMENT" missing.
This seems to be a modified origin SAP Component.
Does anyone know where to find these component?
Maybe with informations what has to be changed for the Z*copy or is this only a 1:1 copy?
Does anyone have a detailed document for configuring ChaRM on SolMan 7.0 (Mailadress is visible on my business card)
thanks in advance
kind regards
Thomas
Helpful answers/documents will be rewarded, surely!

You need to set up your solution and therefor define a logical component in SMSY. For instance the logical component might consist of your ERP E, Q and P systems.
This logical component is added to an SMI Project. It basically tells the SMI project which systems are involved in the process. After that you will have to create an IMG project, CTS project, release the SMI project to the Change Request Management and generate Maintenance Cycle and Task List (this is all being done in SOLAR_PROJECT_ADMIN).
/cheers

Very urgent ---- logical componernt in solman

Hi all,
In solman we have created systems for the three systems in our landscape (DEV -> QAS -> PRD). Now in logical component do we need to create three logical component for each of this server or only one logical component and assign the server's to this in the tab current system assignment.
Also for configuring Change Request management should i have a common transport directory or can i have local transport directory in our satellite systems as we have now.
Regards
Madhu

Do not use "urgent" - check the [rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement].
<...>
Do not use words in capital letters and any of the words: urgent, quickly, burning, etc in your message. Especially not in the title! This just irritates and does not help you get to your goal. From our side, we definitely do not answer faster when we see these words.
<...>
To your problem: Use one logical component and assign the systems to that one.
Markus

No monitors pulled for self defined logical component

Hi,
I have defined a system landscape in smsy and created solution landscapes in the sm. For some systems I had to create a new logical component.
My problem: Although RFC destinations work fine, for all systems within the new logical component no monitors are pulled out of rz20.
If I use a SAP-defined logical component it works.
I use Solution Manager 3.2.
Is there any documentation for this problem or does anybody know a solution for this?
Thank you and best regards,
Tim

Hi again,
I thought about the problem and tried several things. The problem is not the self defined logical component. The problem is the product definition. I can`t monitor systems, which I created as product SAP ERP in smsy. The check "SAP System ..." doesn`t appear when I want to setup System Monitoring.
Does anybody have an idea what I do wrong?
Regards,
Tim

Logical component in SolMan using SMSY

Similar Messages

Maybe you are looking for