Logical ports - SRT Framework exception: Preconfiguration is invalid

Hi all,
I'm recreating logical ports in a test system which has been refreshed from live. We have 10 web services which are consumer proxies in SOAMANAGER. I'm clicking the create logical port button and providing the WSDL file details in the popup.
For 5 of them it worked ok; for the other 5 I got the error "SRT Framework exception: Preconfiguration is invalid".
I've searched but I can't find much useful help on this error. These are all services which were using in our live environment so I wouldn't expect any fundamental errors. Maybe there is some issue with those 5 WSDLs. We applied some service packs a couple of months ago so there may have been some changes since we last had to do this. I don't see anything useful on OSS.
Any ideas anyone?
Best regards,
Paul

Srinivas,
Thanks for the response. The consumer proxies (services we consume from other providers) don't seem to be listed in SICF. Just the web services which we expose. The same with the note you found, it's about publishing web services, not consuming them.
The URI's in the WDSLs are correct, and the fact that 5 have worked shows I have the right authorisations.
My investigations over the last few hours have suggested that it may be related to support packs. I created a very similar client proxy in SE80 in our development system and the configuration tab detail has changed a lot from one we did over a year ago. The old one had an operation profile node with 5 features. The new one created under SP20 also has an interface profile and a security profile with 2 features each.
I could delete the proxy and re-transport but this takes a lot of admin. I wonder if there's a way of refreshing these proxy configurations in the other test systems without a transport.
Best regards,
Paul

Similar Messages

SRT Framework exception: The WSDL document is not compatible with proxy

hello,
I'd like to create a logical port to my web service but when I create this type of error:
SRT Framework exception: The WSDL document is not compatible with proxy class "YAIRPORT_CO_AIRPORT_SOAP": "Unsupported Operation (s): getAirportInformationByISOCountryCode, getAirportInformationByAirportCode, getAirportInforma
someone has an idea?
thank you

Hi,
Most probably your class YAIRPORT_CO_AIRPORT_SOAP was't automatically generated by SAP from the .wsdl file. If so, then you have to generate it from this file and then create the logical port. For this purpose, go to se80, display the function group there you want to add the class, right-click it and choose Create -> Web Service. Then on the following screens choose Service Consumer, Local File and specify the .wsdl file for the web service you want to use. Finally specify a Package, Prefix and Transport Request, activate the changes and you're done. Now you can create the Logical Port.
Hope this helps,
Greg

SOAMANAGER SRT framework exception HTTP :

I have configured the web service in client 100 using SOAMANAGER. I am consuming services from non-sap system. Now, when I am trying to create the logical port in another client it gives error SRT Framework exception: HTTP: Current user does not have the required auth to access the HTTP destination. I have checked all roles are assigned related to web service admin. I am using the same WSDL URL, which I have used for client 100.Please help with solution ..

HI,
First webservice is runtime entity so we have to create the webservice link in each client and server dependent .
Ex:
if you creating web service in 100 client dev system. The service is only for 100 client dev system. So you cannot use this for 200 client dev system .
So we have to get the authorization by user level or system level assignment for web service.
Please get the SRT authorization for the user and i t will be resolved.

SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name

Hi,
I have created a web service in SAP ECC from a RFC.
While configuring the web service in SOA management to publish it, getting error SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name
How to resolve the same.
Thanks
Tanmay

Hello Tanmay,
Are you including quotes (') in the name, I assume not?
Regards,
Siddhesh

Error while creating logical port for Reporting

Hi,
In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
When i am trying to create the logical port, i am getting an error saying,
" SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
And in case it has to be created, how to resolve this SRT framework exception?
~ Ramanath.

Hi,
the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
You should find one entry. Select it and click "Apply Selection".
Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
Copy this value and go to your SAP GUI -> Transaction SM59.
Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
Regards,
Holger.
PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently.

Error while creating logical port for Consumer Proxy in SOAMANGER

Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari Nambiar

Hi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar

Error in logical port while connecting to SAP CRM cloud

Dear Members,
I have created a logical port manually to connect to SAP CRM cloud system. But when I ping the web service I am getting below error. Please let me know how to solve this error.
SRT Framework exception: Service Ping ERROR: Error when calling SOAP Runtime functions: SRT: Couldn't create Object: ("ICF Error when creating HTTP client object by Config for URL <WSDL URL>

Hello Nihar,
The error message indicates the HTTP client object cannot be created by the given URL. Please check if your URL is correct.
You also need to check what protocol is used, HTTP or HTTPS, and ensure the protocol is active in your local ABAP system as well. You can check them by t-code SMICM->Goto->Services.
Regards,
Robert

Error in Logical port for Consumer proxy in SOAMANAGER

HI Experts,
While creating Logical port for Consumer proxy in SOAMANAGER I am facing problem
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL ".
Kindly suggest.

Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh

Unable to create logical port in SOAMANAGER

Hi All,
When Im tryign to create a logical port for my consumer proxy I get
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination.
Any clue what authrizations I need? I didnt get this error while generating the proxy from the wsdl and Im using the same userid/pwd.

Hi,
Even I get the same error.
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I found the note : Note 1240233 - Error when maintaining logical ports using SOAMANAGER.
Applied the note, still the same error.
Have this issue is resolved?
Any other solution?
Regards,
Sunil.

Error when generating logical port in SOAMANAGER

Hi,
When generating the logical port in SOAMANAGER transaction I get an error message 'SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.
Does anyone know what the problem might be?
Thans in advance.
Kind regards,
Amel Alic

Hi,
I, by mistake, reported the same problem; however the problem is that I referenced the WSDL without endpoint (WSDL service name....). I took this URI from Servces Registry, but was wrong (altough on the SR there were a valid binding+endpoint).
I put the right IRU pointing to the compete Service COntract (with endpoint reference), and it worked.
If you did't solve the problem, try to opern on the browser the URI you are referring to, and see, at the end if it contains the endpoint like that:
<wsdl:service name="zsMy2ndCodeFirstWebService">
<wsdl:port name="zsMy2ndCodeFirstWebServiceBinding" binding="tns:zsMy2ndCodeFirstWebServiceBinding">
<soap:address location="http://xyz:8000/sap/bc/srt/rfc/sap/.....my service operation..." />
</wsdl:port>
</wsdl:service>
Hope this help.
Regards
Roberto

Error generating logical port in SOAMANAGER

Hi,
When generating the logical port in SOAMANAGER transaction I get an error message 'SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.
Does anyone know what the problem might be?
Thanks in advance.
Fernando.

Hi,
go to SICF transaction under /sap/bc/srt/wsil path, test the service and look for service provider you want to consume.
you get 2 links then test for logical port.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3
The link is constructed in the following way:
http://<host_name>:<port>/sap/bc/srt/wsil?sap-client=<sy-mandt>
or you can use transaction SICF then navigate to node /sap/bc/srt/wsil
and press "Test service" from the context menu.
In case there is a Service Registry in your system landscape to which the provider system is connected the profile-based endpoints could be found in that Service Registry as well.
you can follow note 1330545
/people/franklin.herbas/blog/2007/12/11/service-modeling-with-the-esr
/people/peter.mcnulty/blog/2008/02/04/service-implementation-in-abap
regards
nag
Edited by: welcomenag on Jun 25, 2009 5:56 PM

Unable to create logical port

Dear All,
I have created a web service from a function module. I have also created a proxy for the web service.
Before creating the logical port, I am also including the same port name in the endpoint of the service.
My scenario is, I am creating and consuming the web service in the same server.
While creating the logical port, the error
SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL
is coming.
Can anyone help me out with this please?
Regards,
Prosenjit.
Edited by: prosenjit chaudhuri on Apr 30, 2009 4:39 PM

Hi Prosenjit,
I have received the same error when creating a logical port. I believe that the issue may be to do with the default PI WSDL containing two <wsdl:port> definitions, one for HTTP and one for HTTPS. I saved the WSDL locally, removed the <wsdl:port> definition for HTTPS (as I am only using HTTP) and then generated the logical port successfully, without receiving the error message.
Please note that you must use the via File option, rather than via HTTP Access, as the HTTP version will still contain the two <wsdl:port> definitions.
Please also watch out for Note 1325092, which means the URL Access Path (on the Transport Settings tab) is not set correctly. If this Note applies, you may need to copy the complete URL from the WSDL into this parameter if it is not set correctly.
Hope this helps.
Cheers,
Jon

Connection to ByDesign with a ODP Source system: Logical port creation on CO_RSDSPX_ODP_IN

Hello,
I am trying to connect my ByDesign Could server to the our BW Server by an ODP Source system.
I tried applying what SAP recommend:
http://help.sap.com/saphelp_nw73/helpdata/en/46/b9297716c94e509fcbe62d3c795e85/content.htm?frameset=/en/c6/afacb707764885a6fb62f511c24f34/frameset.htm
http://help.sap.com/saphelp_nw73/helpdata/en/ca/14c0899cb04f16929b5d88e147fc8f/content.htm
http://help.sap.com/saphelp_nw73/helpdata/en/9e/c7a3591dc74a679bbc9716354e42af/frameset.htm
When trying to create a Logical Port on CO_RSDSPX_ODP_IN from SOA Manager with a WSDL Based configuration (downloaded from a Webservice of our ByD), this error is thrown:
SRT Framework exception: The WSDL document is not compatible with proxy class "CO_RSDSPX_ODP_IN": "Unsupported Operation(s):GetList, CloseSubscription, CloseSubscription, CloseSubscription, CloseSubscription, CloseSubscripti
Do you have any idea ?
Also, i was unable to use any Consumer Service directly ... I am not a Basis and don't understand what configuration needs to be done.
Thank you very much.

Hi,
Did you create consumer proxy for the service you like to consume ?
It looks like your WSDL and Consumer proxy are not the same ?
Or you could create Logical Port Manually, but it will fail on provider side because the message you are sending and the provider of the service are not the same.
Manual Configuration
The system uses a user-specified binding URL to create a logical port. You need to specify a unique name for the logical port.
Thank You
Regards
Gov

Creation of logical port

hi,
Can any one tell us creation of logical port for publishing a webservice.
While creating we are facing following exception:
SRT Framework exception: Initial value "operation table" in method IF_SRT_WSP_SUBJECT_CONTEXT~IS_COMPATIBLE_TO_PROXY_ of class CL_SRT_WSP_SUBJECT_CONTEXT
While testing with web navigater it is working fine

Mr. Snehasish Das
Thanks for your reply.
Actually we are trying to create a web service using BAPI. We have created the webserive and tested the WSDL in SOAmanager. It is working fine.
And when we are trying create a logical port for CO_ESREGISTRY_WSSI in SOAmanager to publish the webservice we are getting the following error.
SRT Framework exception: Initial value "operation table" in method IF_SRT_WSP_SUBJECT_CONTEXT~IS_COMPATIBLE_TO_PROXY_ of class CL_SRT_WSP_SUBJECT_CONTEXT
We had specified the Open porttype WSDL document in URL for WSDL Access

SOA Management - setting up logical port for WS

Hi
I'm trying to use the RepositoryFrameworkWS from abap.
During this i am setting up a logical pot for the webservice.
This is done through the SOA Management.
I find the consumer proxy CO_KMCWS_REPOSITORY_FRAMEWORK
I then try to create the logical port.
i use the wsdl
http://<server>:<java_port>/RepositoryFrameworkWS/Config1?wsdl&
when i apply the settings i get an error.
SRT Framework exception: The WSDL document is not compatible with proxy class "CO_KMCWS_REPOSITORY_FRAMEWORK": "Operation(s)Missing setGlobalConfig, resetSessionStatistic, resetGlobalStatistic, getSessionStatistic,
I know the operation i want to use(findResources). But I don't know how to set it up.
Can anyone help me ?
Best Regards,
Rasmus

Hi Rasmus,
Please check the Service definition in the WSDL URL given for Logical Port creation is same as the Service definition in the proxy CO_KMCWS_REPOSITORY_FRAMEWORK. It seems to me that some methods/ operations in th proxy could not be found in the Service definition in the WSDL URL.
Download the WSDL from the URL and open it using some tool and compare the Service definition with that of the proxy.
Regards,
Avishek.

Logical ports - SRT Framework exception: Preconfiguration is invalid

Similar Messages

Maybe you are looking for