Speakerphone doesn't work post iOS7 upgrade.

Speakerphone doesn't work, I can't hear anyone when I put them on speakerphone or when i try to listen to voicemail on speakerphone.  This happened post iOS7 upgrade.  Any idea?

Howdy klwalt02,
The following article details informatino and steps that may be helpful.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
Allen

Similar Messages

  • IPhone 4S ringer doesn't work with ios7 upgrade

    What's up with no ringer on ios7 is this going to be fixed or am I buying an android before a fix s available

    aprilfrommarshall wrote:
    I do believe I am the single dumbest person on Earth. Thank you!!!!!
    I feel confident that I have you beat many days.
    Glad everything is good now.

  • BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

    These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

  • Wi-Fi isn't working post ios7 update. Any tips?

    Wi-Fi isn't working post ios7 update. Any tips?

    Check your Wi-Fi systems and all that settings first. Make sure on your iPad it's referring to the correct network has the correct password.
    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • TS3367 facetime doesn't work well after upgrading to ios8. I need to make a call several times to connect.

    Facetime doesn't work well after upgrading to ios8.
    When I make a facetime call, it doesn't sound some times on the other side.
    When it rings on the other side and is answered, it says (connecting), but it is still ringing on my side and never connected.
    After that, I disconnect and make a second call, it sometimes connects, but not everytime.
    I need to call several times to connect. It is really hard to connect through facetime after upgrading to ios8.
    I purchased three iPad so far because of this good feature (facetime).
    Please fix this issue as soon as possible.
    Thanks.

    Hi,
    There are two easy fixes to this.
    One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
    Two, go to Settings and turn-off "Handoff". This can be found under the General page.
    Hope this helps!

  • Dreamweaver doesn't work after Yosemite upgrade.

    Dreamweaver doesn't work after Yosemite upgrade, it asks to install Java Runtime SE 6, I've tried that, I've also installed latest Java and it still won't boot, keeps asking for for Java Runtime SE 6

    You need http://support.apple.com/kb/DL1572
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Help, My iPad Doesn't Work On iOs7

    I have neever been so unhappy with an upgrade as I am with iOs7. What a mess they made of everything. Why dod theyt have to re-invent the wheel? My Youtube doesn't work and surfing the internet went to a crawl. Can someone give me some advice on how to get the old software back?

    Hi David
    To be honest I am not sure what I updated from in my OS X All I do is agree to install when the automatic update says there is an update available for my Mac. I'm curious when we pay thousands of dollars to Apple for the best computer why we have to keep shelling out the clams to keep it running. What does the new update do that we have to pay for? I appreciate you telling me about it and I guess I need to know whaat it does. I'll try and find some reading on it.
    FIREFOX - I'm trying to decide what to run for a browser now. The reason I switched to Firefox is because it was said to be faster than Safari. I noticed also that when I view Youtube videos with Safari, we are bombarded with friggin commercials to no end.
    CHROME - I have been contemplating discarding my Google account because it seems Google wants to force us to go through them to access all my other accounts, and now they are getting to the point that when I try to open an account like Netflix or Facebook or other accounts, they try to force me to sign in with my Google account and they don't give me any other options. I am very upset as are many others with this communist turn Google has done. I don't want to change my email, but I may have no choice. I went into my Google account settings and chose to disconnect my other accounts from Google, but they still Hi-Jack my other accounts even when I choose not to connect them.
    Now this morning I noticed my Spell Check isn't working. I have it set to check spelling automatically in Language and Text.
    I have been trying to figure out how to check my version of Adobe Flash. Where can I find it to check it? It's not in my Applications folder like it's supposed to be. You're a little over my head with installing a control panel to install updates. I'll try going to Adobe.com/flashplayer andd try to update.
    I have power cycled my modem several times with no change. I am using Centurylink for my internet which is the worst I have ever seen for reliability. There aren't a lot of choices where I live. Every time I have trouble ith them and make the dreaded phone call to 611, they say there are no problems and want me to go through a barage of their stupid tests that never work because the problem is on their end. I think they over sell the service and at peak usage times the bandwidth is sucked dry.

  • Email account doesn't work with ios7

    I'm an italian user.
    I have upgraded to IOS7.
    After upgrade some email accounts works fine and other email accounts doesn't work at all (Alice from telecom, Tiscali).
    Any suggestion ?

    The problem is deeper than that. It's not reader. Now the same form I was creating in LifeCycle Designer ES2 yesterday, with the actions working perfectly, no longer work. None of the actions are working.
    Could it be realted to me trying to set the default version compatibility to Adobe 7. It gave me warnings, so I set it back to 9.
    Any help would be appreciated.

  • Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8

    Hello,
    I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
    Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
    Here below is the code used to print my document :
    char szJavaPrint[6000];
    sprintf(szJavaPrint,
    "pp = this.getPrintParams(); \r\n"
    // fill pp with parameters
    "pp.interactive = pp.constants.interactionLevel.silent; \r\n"
    "\r\n"
    "this.trustedPrint(this, pp);"
    PDDoc pdDoc = AVDocGetPDDoc(avDoc);
    AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
    It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
    All ideas to resolve this problem are welcome.
    Kind regards,
    Joe

    See what happens if you remove the "setting of interactive to silent"...
    There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
    Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function...

  • Quick launch buttons and touch functions not working post win7 upgrade

    I have several problems that I think are related.
    1) When I rotate the screen and then bring it close (as in flat) to the keyboard, the screen goes blank. There is no key combination I can find that restores the screen. Putting it back in notebook orientation doesn't do anything either. Only thing to do is a hard reboot.
    2) the quick launch buttons on the screen edge are not functioning as follows:
    a) the hp mediasmart button (the one with the wave) doesn't work
    b) the screen rotation button produces the same problem as 1) above
    c) the third button which looks like either gears or a sun (I don't know what it should do) brings up the windows mobility center, where I have found problem number:
    3) On tablet PC settings, the display tab, there is one display: 1. mobile PC display
    on the same tab, there is a setup button. The next screen says:
    pen input
    touch input
    Regardless which one I select, on the following screen (where it says Press this screen with ....) when I press with either my finger or the pen, nothing happens. Which seems like either:
    it thinks another screen is active or
    the touch components are completely non functional.
    4) Not surprising, the touch functions are completely non-functional
    I have installed all of the drivers for this TX2-1025dx for Win7(64bit) per the HP support/drivers page.
    Not all of them resulted in a clean install. 
    Here are other drivers that I had problems with (meaning that I got an error message, it failed, it had to be done more than once, something else broke, etc.)
    AMD AHCI  - started catalyst installer then failed
    Authentic fingerprint driver - "dpinst64 not marked for installation"
    Ntrig Duosense - had to do this one multiple times to get the fingerprint reader to work
    HP Mediasmart MVP - hung in CMD
    I have checked that all of the startup services are actually enabled in msconfig including quick launch buttons, hpwuschd, and media smart. Nothing is disabled in services.
    I have reinstalled the quick launch buttons driver for this product from December 2009. (There is an earlier version from November.)
    I installed the bios upgrade (before win7, actually) it is currently F.25
    I have also eliminated EMF possibilities.
    I have searched the forums, and while I have found some interesting clues, I don't see anything like this - at least with a solution.
    Any assistance would be greatly appreciated as this thing is quite useless to me as it currently functions. It is not a tablet anymore.
    TIA

    [knock knock] Helloooooo??!!??
    Installed 6.50.9.1, which is in between the last two quick launch button (QLB) drivers (that did not work). Also fixed the lightscribe and mediasmart DVD installs. Same problems, no touch or pen, and a new bug I discovered with qlb
    First, if you search for tablet in the start menu, there is a selection to set the tablet buttons to perform certain tasks. When you run that, it says that teblet buttons are not installed on this pc. Doesn't matter if QLB is installed or not - same error. Hmmmmm. Check with your pc manufacturer..... I think I am doing that. I am starting to feel like I am working for HP.
    Next finding: Using mobility center, I found that if you orient the screen to landscape for the slate config, and then rotate the screen, it does not go blank. However, if you rotate the screen back to notebook, it goes blank. And of course it keeps that upsidedown config when you reboot, too. So, the way to recover from that (because you really need a keyboard if you don't have a working pen and touch takes 30 sec to respond) is to keep trying to get touch to orient the screen back to landscape for notebook. Then rotate the screen to landscape for notebook. And uninstall the QLB driver that doesn't work and reboot. But after that, touch and pen did not function.
    Since touch and pen had previously been restored when I uninstalled QLB, I reinstalled MVP and smartmenu coz they were the actions that I took the last time before touch and pen returned. Didn't work this time, tho.
    I decided to do a system restore back at the point that I had used HP Advisor, since that was the last time I made note that pen and touch were working. Restore failed because a sfi.dat file was not found (and search didn't find it anywhere either). I tried 5 different restore points, before and after that one, and they all failed. But the first time around, I had touch on the logon screen, just not after windows started. The next time, I had touch but not pen. The next time, I had touch and pen, but only for a period of time (I think HP Advisor may have been the intervening event) before they stopped working.
    Oh, and HP advisor does not appear to be actually installing the things on the action list. That could be an issue with Comodo, but it really looks more like an issue with that "mother may I" message from Windows asking for permission to run the program. Often as not, windows reports that the program is not responding. Closing the program with that dialog box actually gives it the kick in the knickers it needs to complete.
    A not so great workaround is to use the mobility center to orient the screen when you want to put the thing in slate mode. You can pin it to the task bar (with a little fiddling).  Touch is extremely slow to respond in slate mode. For example, it took about 3 minutes to get the screen oriented back around to notebook config, which is 4 "clicks" if things are working right. Pen works sort of OK (although I haven't tried any writing) . Gestures for scrolling do not work.
    I am done with the troubleshooting until someone comes up with other targeted ideas.I have been keeping detailed chrono notes.
    Again, I hope the information here leads to a solution. This unit is not a functional tablet and I don't want to stay with Vista, neither should I have to since this is supposed to be compatible.

  • I have an Iphone battery extender that no longer works since IOS7 upgrade

    I have an Iphone battery extender that now appears not to work since the IOS7 upgrade? It is not an official Apple product but has worked well for over a year? any ideas as to a solution the battery charge indicator comes on then goes out after 20 secs

    What did the battery's manufacturer say when you called them regarding THEIR product?

  • Citrix is not working post Yosemite upgrade

    Post the upgrade to Yosemite, my citrix application is not opening. I am being asked to install Java application everytime I boot even though I have installed. Not sure if both are related. I need citrix application to connect to my work. Any help is much appreciated. Thanks.

    Since I am not familiar with the application, I am answering assuming that the Java issue is connected to the application problem.
    Are you sure you have Java installed? An upgrade of OS X to a new major version, such as Mavericks to Yosemite, will delete at the very least the functional components of all Java installations (likely for security and/or compatibility concerns).
    If you are sure, which Java do you have installed, and what is the nature of the Java install message?
    Some applications on OS X still require the Java 6 runtime supplied by Apple which is now considered 'Legacy Java'. It is a seperate install to Oracle's Java, and as such installing Oracle's Java 7 or 8 will not dismiss the message to install the Legacy Java.
    There are some convoluted methods involving the terminal to 'force' legacy dependent apps to recognise the Oracle Java. These procedures are not recommended, as they may cause problems with the applications.

  • E-mail notification doesn't work after software upgrade

    Based on the recommendation of a sales rep; I did the software upgrade yesterday and have had nothing but problems.  All the e-mail accounts didn't work.  So I spent an hour getting my e-mails setup and guess what?
    Even though I have it setup to check every 10 minutes; it doesn't work.  I have to manually go to each account and click on the 2 arrows to check.  I used to get a flashing blue light on my phone when I had a new e-mail; now I don't.
    What's going on???????????????

    Hi, I did all you mentioned but still same error messages
    Oct 25 14:16:42 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: Using primary internal av scanner code for ClamAV-clamd
    Oct 25 14:16:42 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: Deleting db files __db.001,__db.002,__db.003,__db.004,nanny.db,snmp.db in /Library/Server/Mail/Data/scanner/amavis/db
    Oct 25 14:16:42 xxx/Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: Creating db in /Library/Server/Mail/Data/scanner/amavis/db/; BerkeleyDB 0.54, libdb 4.7
    Oct 25 14:16:43 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: initializing Mail::SpamAssassin (0)
    Oct 25 14:16:43 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: SpamAssassin debug facilities: info
    Oct 25 14:16:43 xxx /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[16427]: (!!)TROUBLE in pre_loop_hook: config: no rules were found!  Do you need to run 'sa-update'?
    Suicide () TROUBLE in pre_loop_hook: config: no rules were found!  Do you need to run 'sa-update'?
    I removed all spam filters and mail works without, which is not so good but seems to be the only way at the moment.
    Any other idea or should I just reset the whole installation?
    Thanks for your feedback.

  • HT5957 Controlling music apps in lock screen doesn't work in ios7.02?

    After applying the second update to ios7, none if my music apps function in the lock screen.  No stopping music from any app including the Apple music app in the lock screen.  This means that Bluetooth controllers such as car stereo systems can't control next track, pause or stop on any music app being accessed since the screen is generally locked while driving.  This is dangerous because the only way to control these apps - while driving - is to unlock the phone.  Apparently my phone is now more secure, but I guess that means it securely doesn't work in lock screen.

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Recording doesn't work since RAM Upgrade on WinXP x64 with Audi

    Hello there,
    I've been using my SB Audigy 4 (the usual version, not the pro version) for months in conjunction with WindowsXP Professional x64 SP2 by just using the drivers that can be downloaded from the web, "SBAX_WBUP2_LB_2_09_006.exe". Back then I didn't use the original CD because I thought it wouldn't support x64, which actually is incorrect . Everything worked fine. I then upgraded my memory from 4 GB to 8 GB. I am not sure whether the RAM update caused it or whether I did any other minor thing (this could involve BIOS updates or other software issues), but now I have the following issues:
    ) Recording doesn't work anymore at all: Things like VoiP (Skype, etc) or other recording doesn't work anymore, the indicator stays at 0 all the time. No matter whether the input source is the (WORKING) microphone, or the "what you hear" while playing music at maximum level. It simply refuses to record. Btw, I do have another partition that has Windows XP Pro 32bit installed, I can record with that one without problems. Using the same drivers that I mentioned above.
    2) Rear speakers aren't working. What should come out of the rear speakers comes out of the front speakers instead.
    I tried the following things to solve the problem, without success:
    ) Usual re-installation of the drivers
    2) Following the guide "Uninstalling Sound Blaster Drivers and Applications" that involves the "Clean start" of Windows and removing WDM drivers using the Creative-Utility. I did install the original CD drivers afterwards instead of using the newer drivers from the web.
    About recording there's another thing I can say: when I set the input source to the microphone and the I disable that the microphone output is muted, I can hear myself speaking.
    Any ideas what I could do?Message Edited by NameZero92 on 2-30-200706:8 PM

    wow, Thank you.
    I could indeed get the sound working when burning the 4 GB of RAM that I had additionally installed, which is hilarious, of course. :-)
    Does the driver-dev team look into this forum from time to time ? I would like to contact the support, but I purchased the audigy longer than a year ago. And actually I am not the who one who doesn't know what to do, but I just found a bug in the drivers (well, the guys in the other thread did, but what it comes down to is that with capacities of > 4GB deactivate the possiblity to record anything at all).Message Edited by NameZero92 on 0-03-200804:20 PM

Maybe you are looking for