Login failure after update osx 10.5 server

hi,
i have a somewhat silly problem. I have installed OSX 10.5 server on a G5 DP 1.8 MAC Pro and have been using that for a couple of weeks. Now i installed an update today and since then i can't login to OSX anymore on my server. none of the user accounts have acces. and the same goes fot the administrator accounts i have set up..
i had this problem with 1 specifik account because it was registered to a group that had no acces directly to the server. but i see no reason for this to happen after an update.
so now i have no way to administer my server.
Any help would be greatly apreciated.
Paul Thijssen

can you access the server via screen sharing? WGM? server monitor?
if so, but the SA is the only broken part, read this thread:
http://discussions.apple.com/thread.jspa?threadID=1587906&tstart=0

Similar Messages

I don't know icloud user name&password to login iphone after update ios7

I don't know icloud user name&password to login iphone after update ios7.
I try to recovery apple i.d., but nothing.
I called Thailand service support 001800 4412904.
He advise me to goto http://expresslane.apple.com/, and send issue form to apple service.
I wait more than a week, but no reply.
I have purchased invoice and iphone package to confirm this phone is not stolen.
How could I do?
Thank you for your time to reply.

Unfortunately, the contacting Apple's express lane is all you can do, if you had no luck to reset your password on http://iforgot.apple.com/

After effect 7 pro crash after update osx to 10.4.7

Topic
After effect 7 pro crash after update osx to 10.4.7
Robinmaster - 03:53am Aug 2, 2006 Pacific
Hi all write this messages bacouse i have a problem with start up of my AE 7 pro. AE7 pro crash when boot after initialization of GUI. try remove a open gl plug but not resolved e problem..
E error is
Date/Time: 2006-08-02 12:44:19.674 +0200
OS Version: 10.4.7 (Build 8J2135)
Report Version: 4
Command: After Effects
Path: /Applications/Adobe After Effects 7.0/Adobe After Effects 7.0.app/Contents/MacOS/After Effects
Parent: WindowServer [57]
Rosetta: Yes
Version: 7.0 (7.0)
PID: 2356
Thread: 0
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000001
Code[1]: 0x00000000
Please help me.. i'm deprived of hope..
Th's
N.B i work with MAC BOOK PRO (intel ) with 2 GB of ram

Hi there, same problem here but on a PowerPC.
I just bought AE7 and installed it on my G5 (with then 10.3.7 running on it). Install went fine but the application would not start up.
Thought this might be a good time to clean up and installed fresh new system on this G5, updated it to 10.3.8 and first thing: installed AE7 again.
But: same problem. In fact, all Adobe application will not start up! The icon bounces a little and then nothing but a crash report.
For a moment I thought I had the solution, because I disabled all the "user fonts". Everything worked fine. Then I installed, as before, my Apple applications (Final Cut Pro, DVD Studio Pro, etc) and, oh no... same problem over again. The Adobe application will not start up!
Tried to disable all non essential fonts: no cure. This is driving me crazy....
Any suggestions?
Date/Time: 2006-10-14 15:43:31.127 +0200
OS Version: 10.4.8 (Build 8L127)
Report Version: 4
Command: After Effects
Path: /Applications/Adobe After Effects 7.0/Adobe After Effects 7.0.app/Contents/MacOS/After Effects
Parent: WindowServer [108]
Version: 7.0 (7.0)
PID: 733
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
etc etc etc...

My powerpoint slides can't b opened after updating OSX maverick. Why ?

I'm using the mac pro 2012 for one year long.
no problem when i got
but one thing
I remember after upgrading OSX Maverick
My work powerpoint slides cant b opened .
Yes
i can open but no more slide show
if i press slide show key, it automatically quit
How could i do ???

hello bro
i already downloaded 14.3.9 but
when i install , mac says " office 2011 update can't b installed on this disk. A version of software required to install this update was not found on this volume "
what does it mean ?
my current version of microsoft office 2011 is 14.0.0
what could i do ?
please help me

Parallels error after updating OSX

I just updated OSX (which I hadn't done on this computer in a long time) and now whenever I open my windows XP parallels VD, it crashes (as per usual with windows).
when it boots it asks if i want to boot into safe mode or command line or normal and when i hit normal, it starts the loading page, but parallels crashes before the login screen.
i tried updating parallels and the update installed fine, but it didn't help the crashing issues.
Any solutions?
Thank You
Ben

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Stuck at login screen after update froze

Hi everyone, I have a Macbook that is a couple years old and have Leopard on it. Last night, I was prompted to install several updates and then restart my Macbook. I did so and then the updates began to install, but then appeared to stall. I hit the power off button and then turned my Macbook back on again. This brought me to the login screen, but I don't have my Macbook set to require me to login each time I use it. I entered my password and then it went to the blue screen like it was about to bring me to the desktop. But that didn't happen. It brought me back to the login screen, which is where I am still stuck as of this writing. Is there anything I can do? Thanks for your help.

No guarantee this will solve your problem, but you can give it a try:
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-User mode by holding down the command (Apple) key and the 's' key while you press the power switch. You can let go the keys when you see white text on a black background. When this has finished you will see a prompt ending in '#', although there may be other messages. Type
/sbin/fsck -fy
followed by a return, at the prompt and wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
rm Extensions.kextcache
cd /System/Library/Caches
rm -r *
reboot
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
If you get error messages saying files do not exist, just ignore them and type reboot.
If the above is unsuccessful then you may be able to reinstall OS X using an Archive and Install which does not erase the hard drive:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Start up failure after update

My HP Pavilion 17-e073ed fails to start up after updating. (Windwos 8.1)
The failure id is OU6G62-6RN71F-MFPWWK-60S303
Automatic system recovery doesn't work and starting up in the safe mode isn't possible.
Can anybody help

Hi PECAKO,
Welcome to the HP Forums! I see that you are having some problems upgrading to Windows 8.1. The Automatic System Recovery was that trying to restore Windows 8 or trying to recover 8.1? How long have you had the Pavilion for?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

IPhoto update failure after updating to yosemite

Updated to yosemite, now I can't use iPhoto without updating that too.
Error message when I try to update iPhoto : "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled". Neither is true, no other option or explanation given. The iPhoto was bundled with the computer when I bought it in 2009, never had any updating problems until now, checked Apple ID and it is the correct one. This was obviously caused by the update so why is a fix not obviously available. Makes me wonder what other problems will arise.
How can I get the proper update?

Error message when I try to update iPhoto : "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled". Neither is true, no other option or explanation given. The iPhoto was bundled with the computer when I bought it in 2009, never had any updating problems until now, checked Apple ID and it is the correct one. This was obviously caused by the update so why is a fix not obviously available. Makes me wonder what other problems will arise.
That means, that iPhoto has not been associated with your AppleID. You do not say, which iPhoto version you are trying to update from.
Associating iPhoto with your AppleID should have happened, when you bought the computer with iPhoto preinstalled with MacOS X Lion or later or with the Mavericks upgrade, if your Mac came with SnowLeopard. Try, if you can "accept" iPhoto now:
Sign into the AppStore with your AppleID
Open the "Purchased" tab. Do you see iPhoto with an "Accept" button?
Accepting associates your Apple ID with the preinstalled iPhoto. It should move iPhoto from the "Accept" portion of the App Store to the "Purchased" tab. After that, you should be able to update iPhoto from the Updates tab of the AppStore.
If you do you not see the update there, try to buy iPhoto. iPhoto may show for free, so you do not have to pay again.
Backup your iPhoto library, if you do not have a current backup.
Uninstall iPhoto by deleting it from the Applications folder, otherwise you cannot buy it again. But do not empty the Trash, so you can put iPhoto back, if need be.
Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
Open the main page "Featured" of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/
After you update iPhoto, your iPhoto Library will need upgrading. Make a backup of your iPhoto Library, before you open iPhoto the first time after updating.

After updating OSX Mavericks, I have two problems:

1) my mobile broadband software / dongle does not work (I use a Huawei E169 HSDPA USB stick).
2) my network printer does not work (I use a Canon C5030i).
On both I have tried to reinstall the latest driver software available, and still it does not help. I am confused as this is obviously related to the upgrade, but dont know if the solution should come from Apple or the two other vendors concerned...
Alex

The other two vendors need to update their drivers. However, Canon's update will likely come through Apple in the form of a printer update.
You might try removing the printer and re-adding it to the Print & Scan system pref. Sometimes that will make them work after updates or upgrades.

SharePoint Server 2013 Upgrade failure after Updating SP1 + Nov10 CU " Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown"

After Successfully having SharePoint Server 2013 Farm Installation on 2 Servers AD + Central Admin Application server, OS: win server 2008 R2 Ent SP1.
I set up the configuration for SharePoint app and Workflow Manager to work properly on the Den environment, the time for SP1 running has come and after downloading the Service pack 1 of SharePoint server 2013 and completing the wizard, I run the SharePoint
2013 Configuration Wizard after installing SharePoint 2013 SP1, and the wizard failed on step 2 with the Error from the Log file as showing below,
"Task upgradebootstrap has failed with an unknown exception
01/04/2015 00:43:30 11 ERR Exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Exception of type 'Microsoft.SharePoint.Upgrade.SPUpgradeException' was thrown.
at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()"
Also I was not able to create websites like before, and the creating of new site is failed with error message :
"Failed to call GetTypes on assembly Microsoft.Office.TranslationServices, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Method not found: 'Microsoft.Office.Web.Common.ProcessImageInfo"
Is there any solution to my problem with SP1 of SharePoint Server 2013, I don't think that SP1 should generate such bugs in a stable environment.
Basel Badr ,SharePoint Specialist ,MCAD ,MCTS.

Hi Basel,
What edition of SharePoint do you have and what patch did you attempt to install?
If you are on SharePoint 2013 Enterprise, please make sure you are installing Service Pack 1 for SharePoint Server:
http://www.microsoft.com/en-us/download/details.aspx?id=42544
If you are on SharePoint 2013 Foundation, please make sure you are installing Service Pack 1 for SharePoint Foundation :
http://www.microsoft.com/en-us/download/details.aspx?id=42548
For more information, you can refer to the thread:
https://social.technet.microsoft.com/Forums/sqlserver/en-US/ba9656e9-837e-4261-b164-b5bdfe8adce3/why-does-machine-translation-fail-when-i-do-not-use-it?forum=sharepointgeneral
http://sharepoint.stackexchange.com/questions/84284/failed-to-call-gettypes-on-assembly-microsoft-office-translationservices
Best Regards,
Eric
Eric Tao
TechNet Community Support

IPod failure after update : do not panick (too much)

This message is both to thank helpers on the forum that saved me from having to send my iPod to repair and to those of you who are (or about) to experience the same problem.
My profile :
40Go 4th generation iPod with 20Go music in, always handled with extreme care, used daily for 16 months (so out of warranty) without a slightest faillure, including ripping to my new computer.
PowerBook G4 under Mac OSX 10.4.6. Just to say my message won’t help PC users, sorry.
Connection Firewire or USB2.
My nightmaric experience of 2006-03-23 update.
After I had updated, I transferred a recent playlist OK onto the iPod but to my surprise read 0 playlists, artists, songs etc on the iPod screen and could not access any tracks.
Did the 5Rs several times with no success, ie different alarm signals would show (not the sad face icon though), the iPod would not connect or would refuse to disconnect or would freeze every app. on my computer which always get a bit scarying. Checked the iPod under disk utility found out several errors.
After much fiddling around and thanks to fantastic help on the forum (track these by browsing my posts), I think I can tell you now what to do if the same happens to you and help you to recover a fully functional iPod in a couple of hours. But beware that this only applies if you don’t have any physical damage of your hardware. My iPod never made the strange noises that many users report. I should add that I am absolutely convinced that it is the update that interferes with some iPod models and so just the software has to be reinitialized.
First try a 5R of course, but if this does not solve the problem (in my case it surely did not), switch to disk mode and connect your iPod. If it opens iTunes, quit iTunes and go to disk utility. First check the disk in the SOS panel. It will give you an idea of bad sectors and/or failure to complete. If the checking is OK proceed to erase with the security option « zero out data ». If the disk has bad sectors, you should first do a quick erase with the « don’t erase data » option, then check if the disk passes the check up. If yes return to erase and erase again by selecting « zero out data ». The computer will warn you that you are going to lose functions of the iPod but don’t worry, you will restore these straight afterwards. This reformatting will take maybe a couple of hours but you should see it progressing smoothly with the elapsing time moving on. After it is completed, re-check the disk once more. You are now ready to restore, and I recommend that you do it using a previous soft version, eg, 2006-01-10 for instance, not 2006-03-23 which initially caused the problem. It may freeze while restoring. Don’t panick and try restoring again. I was successful at my second go. Complete restoring, as asked on your computer, by plugging to power supply. Then enter your own settings, langage etc, and come back to your computer, go to iTunes and…
… I wish you that, a couple of minutes later, you have hundreds songs back onto your favorite music companion and that you are ready for hours of bog-free listening like I am now.
Just to end up, I’d like to thank all the helpers on the forum (Mitch, Lyssa, Jeff… and co.) who give a lot of their time to the community in avery friendly way. I am in touch with Apple so that if ever the problem happens to be reasonably frequent, they do release a note asap.
Best of luck to everyone don’t hesitate to contact me on this thread if you need more details on the procedure, I’ll try to help as much as I can but I am not an expert just a regular user of Apple computers and slightly ; ) addicted to music and daily use of iPod (so not so mad afterall… ; ).
PowerBook G4 Mac OS X (10.4.6) iPod 40G 4th gen

Don't give up HOPE ** this work for Mac users only**
so, after 4 days of trying the disk utility erase mode-- sometimes working sometimes not,,, ditto to all of these posts- my ipod seemed to have a hard drive failure the way it was clicking-- anyways-- here is what worked for me--
hold the middle button and play/pause until you see the check mark- (this puts the ipod into disk mode)
plug it in to your computer
open up the disk utility
choose Mac OS extended - **make sure the jornaled in not selected, and also **uncheck install OS9
then erase- you may get the question about naming your ipod if itunes opens and all that -- I'd name it, but make sure you check the option to manually update- you don't want to keep the box checked to sync with your itunes at this point-then eject it by using the eject button from itunes in the window on the left-
go to your ipod software updater folder (located in your utilities folder)---- here's the catch- the only updater that seemed to work for me- after 4 days of torment- was the
11-17-05 updater!- (I actually talked to a tech. on the phone and he said the latest update does not have a bug-yeah right,that's when all my problems started- but he said the one before it does!!- thanks for letting us know apple!)
so, double click it- hit restore - and wow- it actually worked- Good luck peeps- I know, myself, I was very disappointed in apple with this situation- My warranty ran out two months ago!- like many others I see here, I feared i was looking at another 300 dollars for the 30GB- but, alass it worked Amen- Let me know if I can help anyone- I'll check back on the board soon- to answer any questions i can
G4 Mac OS X (10.0.x)

Java applet failures after updating to Java 6 Update 19

Hi,
I'm currently experiencing a failure of unsigned Java applets after upgrading to JRE/Plugin 1.6.0_19. The problem with the update has been narrowed down to an interim fix for a TLS/SSL Man-in-the-Middle attack (see http://java.sun.com/javase/javaseforbusiness/docs/TLSReadme.html). This fix intentionally fails attempted renegotiations.
The environment consists of Windows XP PCs running IE6/7 and JRE 1.6.0_19 as clients connecting to a website using SSL connections and SmartCard(PKI) authentication.
Previously, clicking a link on the website produced a new window to an URL with some HTML that uses an <APPLET> tag to open a Java applet. Prior to the applet loading, a Java "Request Authentication" dialog would pop up to allow selection of a certificate to be used for authentication from the browser keystore.
Now, no such dialog displays. And, depending on client and chosen applet, these responses are observed:
(1) complete failure of the applet to load with "java.lang.ClassNotFoundException" and "javax.net.ssl.SSLException: HelloRequest followed by an unexpected handshake message" errors in the console;
(2) the applet loads but is unable to read its data files with "java.io.IOException" and "javax.net.ssl.SSLException: HelloRequest followed by an unexpected handshake message" errors in the console.
Overriding the interim fix with "-Dsun.security.ssl.allowUnsafeRenegotiation=true" results in a return to normal operation, but our security team does not deem this override an acceptable solution.
Any ideas?
Eric

http://pastebin.com/xQfhVirq
Thanks for the detailed log.
Your server requested a renegotiation, and as renegotiation is unsafe, the client refused to renegotiate the connection. That's the expected behavior.
However, it seems strange that the server send a incorrect block of data immediately following the renegotiation request. From the bytes, I don't known what was the data the server sent following the handshake message. It would be of help if you could load your another log with the debug enabled (javax.net.debug=all)and unsafe renegotiation enabled(sun.security.ssl.allowUnsafeRenegotiation=true).
1431. [Raw read]: length = 5
1432. 0000: 16 03 01 00 14 .....
1433. [Raw read]: length = 20
1434. 0000: A3 96 F8 92 83 6C 10 D3 9F 77 63 6C AA DD 7D 62 .....l...wcl...b
1435, 0010: 37 10 50 15 7.P.
1436. btpool0-5, READ: TLSv1 Handshake, length = 20
1437, Padded plaintext after DECRYPTION: len = 20
1438. 0000: 00 00 00 00 F5 2C B2 15 9D D2 F9 8B 65 F8 23 74 .....,......e.#t
1439. 0010: 61 B3 38 47 a.8G
1440. *** HelloRequest (empty)
1441. btpool0-5, SEND TLSv1 ALERT: warning, description = no_negotiation

Multiple failures after updates Windows 7 64 bit Home Premium

After loading the latest set of updates for my Windows 7 Home Premium 64 bit operating system and rebooting, I am now experiencing a cascade of failures. None of my network (wireless or ethernet) adapter or miniport drivers
will load. my firewall will not load or has failed. I cannot logon to my Event Viewer to figure out what failed and my Microsoft NET is giving me errors when I try to access anything that might help me figure out what went wrong. So far I
have done a system restore back to before the update, but it did not fix the problems. I have tried to use Microsoft Fix it, but that must access the internet. I am sending this from a different computer because I cannot get online with the other.
Can anyone give me a clue where to start fixing these problems or do I have to completely reinstall my operating system?
Thanks.

Hi,
In this case, you can try repairing windows image using DISM command.
http://technet.microsoft.com/en-us/library/hh824869.aspx
If it still can't work, please make a repair install to fix your system.
http://support.microsoft.com/kb/2255099
Andy Altmann
TechNet Community Support

Mac Mini login loop after update

Hello, while installing an update on my 09 mac mini, OSX 10.6.8 an error occurred and now I cannot login or start up! Help please.

Hello, while installing an update on my 09 mac mini, OSX 10.6.8 an error occurred and now I cannot login or start up! Help please.

Can't Star iChat Service after update to Snow Leopard Server

We had installed Mac OS X Server on a Mac Pro, and we had the iChat Service working in the organization; but when we update to the Snow Leopard Server we can't start the iChat service again. In the Server Admin app, on the iChat node in the Overview I have this:
iChat Service is: Stopped
Start time: not available
Domain: not available
Client connections: not available
With the update if I choose the iChat service node, I can't see the Start iChat button.
Can somebody help?
Thanks a lot.

Please try here http://discussions.apple.com/forum.jspa?forumID=1352
OS X Server Snow Leopard > Chat and other items.
8:40 PM Monday; January 4, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Login failure after update osx 10.5 server

Similar Messages

Maybe you are looking for