Login problem after upgrade
Hi all,
well my prolem is the following:
I recently upgrade my system. But, since, I'm unable to login correctly using slim. All I have is a "login command fails" message.
This problem happens when I try to log as a normal user but also as root.
Also, I'm unable to log on from the shell into X as a normal user. Its works when I'm root.
I've looked at the log files, but there is nothing special here.
Same is also true for the config files.
Anyone who had this before?
Update: Oupsss wrong category Sorry:/
Last edited by bountykiller (2008-04-23 21:02:04)
http://bbs.archlinux.org/viewtopic.php?id=16152
Similar Messages
-
Login problem after upgrade to mavericks
Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.
Hi cpuman8,
Thanks for visiting Apple Support Communities.
If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
Resetting the original administrator account password
In OS X Lion or later, you can reset your user password with your Apple ID.
OS X: Changing or resetting an account password
http://support.apple.com/kb/ht1274
Best Regards,
Jeremy -
Login problem after testing upgrade today
Yeah problem after upgrade again After i enter my username and password to login to Gnome, i get the message
Your session only tested less than 10 seconds. If you
have not logged out yourself, this could mean that there
is some installation problem or that you may be out of
diskspace. Try logging in with one of the failsafe
sessions to see if you can fix this problem
I sure am not out of disk space so what could the problem be? I am using windows for now till i can find a solution.
Thanks.Sigi wrote:
first do a
pacman -Sy libstdc++5
and see if this solves your problem (more info here)
If this doesn't help post you /var/log/Xorg.0.log, please
Cheers Sigi
libstdc++5 has already been installed. Anyway here is the Xorg.0.log and xsession.errors files
Xorg.0.log
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.16-ARCH i686
Current Operating System: Linux archlinux 2.6.16-ARCH #1 SMP PREEMPT Mon May 22 21:36:23 CEST 2006 i686
Build Date: 04 May 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 29 19:11:49 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1"
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1043,80a5 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1043,80a6 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1043,80a6 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1043,80a6 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1043,80a6 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1043,8095 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5961 card 1002,2002 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5941 card 1002,2003 rev 01 class 03,80,00 hdr 00
(II) PCI: 02:09:0: chip 14f1,2f00 card 13e0,8d85 rev 01 class 07,80,00 hdr 00
(II) PCI: 02:0e:0: chip 104c,8023 card 1043,808b rev 00 class 0c,00,10 hdr 00
(II) PCI: 02:0f:0: chip 10ec,8139 card 1043,80b3 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd7f00000 - 0xf7efffff (0x20000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200] rev 1, Mem @ 0xe8000000/27, 0xfe9f0000/16, I/O @ 0xa800/8, BIOS @ 0xfe9c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200] (Secondary) rev 1, Mem @ 0xe0000000/27, 0xfe9e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[1] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[2] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[3] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[4] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[5] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[6] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[15] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[18] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[1] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[2] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[3] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[4] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[5] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[6] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[15] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[18] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[22] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[25] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[26] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[27] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[30] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[31] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.25.18
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9200 (RV280 5961), RADEON 9000 (RV280 5962),
RADEON 9200 SE (RV280 5964), FireMV 2200 PCI (RV280 5965),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56),
RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49),
RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON X300 (M22 5461),
MOBILITY RADEON X600 (M24 5462), MOBILITY FireGL V3100 (M22 5464),
RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 SE (R420 4A4F),
RADEON X800 XT Platinum Edition (R420 4A50),
RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D),
RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X800 GTO (R480 5D4F), RADEON X850 XT (R480 5D52),
RADEON X850 (R481 4B48), RADEON X850 XT (R481 4B49),
RADEON X850 SE (R481 4B4A), RADEON X850 PRO (R481 4B4B),
RADEON X850 XT Platinum Edition (R481 4B4C),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62),
RADEON X1800 (R520 7100), MOBILITY RADEON X1800 (M58 7101),
MOBILITY RADEON X1800 (M58 7102), MOBILITY FireGL V7200 (M58 7103),
FireGL V7200 (R520 7104), FireGL V5300 (R520 7105),
MOBILITY FireGL V7100 (M58 7106), RADEON X1800 XT (R520 7108),
RADEON X1800 PRO (R520 7109), RADEON X1800 SE (R520 710A),
RADEON X1800 (R520 710B), RADEON X1800 (R520 710C),
FireGL V7300 (R520 710E), FireGL V7350 (R520 710F),
RADEON X1300 PRO (RV505 7143), RADEON X1300 (RV505 7147),
MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C),
RADEON X1300 (RV505 715F), RADEON X1300 XT (RV515 7140),
RADEON X1300 PRO (RV515 7142), MOBILITY FireGL (M54 GL 7144),
MOBILITY RADEON X1400 (M54 7145), RADEON X1300 LE (RV515 7146),
MOBILITY RADEON X1300 (M52 7149), MOBILITY RADEON X1300 (M52 714A),
RADEON X1300 SE (RV515 714E), FireGL V3300 (RV515 7152),
RADEON X1300 VE (RV515 715E), RADEON X1300 (RV516 7180),
RADEON X1300 (RV516 7183), RADEON X1300 (RV516 7187),
RADEON X1900 (R580 7240), RADEON X1900 (R580 7243),
RADEON X1900 (R580 7244), RADEON X1900 (R580 7245),
RADEON X1900 (R580 7246), RADEON X1900 (R580 7247),
RADEON X1900 (R580 7248), RADEON X1900 (R580 7249),
RADEON X1900 (R580 724A), RADEON X1900 (R580 724B),
RADEON X1900 (R580 724C), RADEON X1900 (R580 724D),
RADEON X1900 (R580 724E), RADEON X1900 (R580 724F),
RADEON X1600 XT (RV530 71C0), RADEON X1600 PRO (RV530 71C2),
MOBILITY FireGL V5200 (M56 71C4), MOBILITY RADEON X1600 (M56 71C5),
RADEON (RV530 LE 71C6), RADEON (RV530 VE 71CE),
FireGL V3400 (RV530 71D2), FireGL V5200 (RV530 71DA),
RADEON (RV530 SE 71DE)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.25.18
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.25g1
(II) ATI Proprietary Linux Driver Build Date: May 18 2006 09:54:44
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.25.1-driver-lnx-268237
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9200 (RV280 5961) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[22] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[25] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[26] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[27] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[30] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[31] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x81fe980
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[25] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[26] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[28] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[29] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[30] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[31] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[32] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[34] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x0dc370dc"
(**) fglrx(0): Option "GammaCorrectionII" "0x06419064"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "(null)"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "EnablePrivateBackZ" "yes"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x0dc370dc
(**) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9200 (RV280 5961)" (Chipset = 0x5961)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xe8000000
(--) fglrx(0): MMIO registers at 0xfe9f0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9200
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V280
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.25.18
ABI class: X.Org Server Extension, version 0.2
(EE) fglrx(0): Fail to initialize ASIC in kernel.
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PAT Model: 2002 Serial#: 189
(II) fglrx(0): Year: 2004 Week: 44
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.631 redY: 0.354 greenX: 0.294 greenY: 0.596
(II) fglrx(0): blueX: 0.143 blueY: 0.087 whiteX: 0.300 whiteY: 0.340
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 70 vid: 19041
(II) fglrx(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) fglrx(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) fglrx(0): #6: hsize: 800 vsize 600 refresh: 70 vid: 19013
(II) fglrx(0): #7: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz
(II) fglrx(0): Serial No: 00189
(II) fglrx(0): Monitor name: LCD-MONITOR
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 250/164MHz @ 50Hz [enable load balancing]
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 39 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 interlace
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.19 1024 1088 1200 1376 768 769 772 809 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "1152x864": 119.7 MHz (scaled from 0.0 MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 +hsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.68 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.29 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 150 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 150 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 120 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 120 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 100 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 100 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000af0
(==) fglrx(0): OpenGL ClientDriverName: "atiogl_a_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(**) fglrx(0): EnablePrivateBackZ = YES
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B]
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[8] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[9] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[10] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[11] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[12] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[13] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[14] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[15] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[16] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[17] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[18] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[19] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[20] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[24] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[27] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[28] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[29] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[30] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[31] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[32] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[33] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[34] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[35] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[36] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[37] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area: 0xe8701000 (size=0x078ff000)
(II) fglrx(0): UMM area: 0xe8701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard1: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
AUDIT: Mon May 29 19:12:06 2006: 3974 X: client 3 rejected from local host
AUDIT: Mon May 29 19:12:06 2006: 3974 X: client 3 rejected from local host
xsession.errors
/opt/gnome/etc/gdm/PreSession/Default: Registering your session with wtmp and utmp
/opt/gnome/etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x "/opt/gnome/var/gdm/:0.Xservers" -h "" -l ":0" "napoleon"
/opt/gnome/etc/gdm/Xsession: Beginning session setup...
/opt/gnome/etc/gdm/Xsession: ssh-agent not found!
/opt/gnome/etc/gdm/Xsession: Setup done, will execute: /usr/bin/dbus-launch /opt/gnome/bin/gnome-session
Failed to start message bus: Failed to read directory "/opt/kde/share/dbus-1/services": No such file or directory
EOF in dbus-launch reading address from bus daemon
thanks -
Problems after upgrade: Leopard to Leopard no longer works
My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
nI finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps. -
Unable to get the login page after upgrade from 11.5.10.2 to R12
Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBAHi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA -
Problems after upgrade bios to v4.3 - P67A-GD65
Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above? -
Problems after upgrading to iTunes version 6
Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP -
Permission problems after upgrade to 10.5 on early Power PC G5 Tower
Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan -
Stuck in a "loop" at the login window after upgrading to Leopard
I bought a new iMac Oct 26. It contained Tiger, and included a disk for installing Leopard. I easily got the machine up and running using Tiger, but last night I attempted to install Leopard. When the installation was complete, I tried to get it running. A screen asking for my password came up. I keyed that in and hit logon. Back came the screen asking for the password. To make long story short, I tried everything I could last night, and then called Apple Support this morning. Took quite a while, but I was back in business this afternoon. The technician who helped me sent me the email copied below describing the solution. Perhaps it will help someone else? Romelle
Hello from Apple!
Charles at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
Link: http://www.info.apple.com/kbnum/n306965
Mac OS X 10.5, iMac (Late 2007): Stuck in a "loop" at the login window after upgrading to Leopard
Issue or symptom
After installing Mac OS X 10.5 Leopard on a 20-inch or 24-inch iMac (Late 2007) computer, you may not be able to log in at the login window. Your login name and password are apparently accepted, but after a blue screen appears for a few seconds, the login window reappears instead of your desktop.
Products affected
20-inch or 24-inch iMac (Late 2007) computer with 2.0, 2.4, or 2.8 GHz processors
Mac OS X 10.5 Leopard
Solution
If Leopard is installed
Start up from the Leopard Install DVD and perform an Archive and Install installation (and select Preserve Users and Network Settings).
After the Archive and Install is complete, you should be able to successfully log in. Use Software Update to install any other updates.
Important: Install the iMac Software Update 1.3 for Leopard after the Archive and Install is complete.
If Leopard is not yet installed
If you have not yet installed Leopard on your 20-inch or 24-inch aluminum iMac computer with a 2.0, 2.4, or 2.8 GHz processor running Mac OS X 10.4.x, but previously installed the iMac Software Update 1.2, you should install the iMac Software Update 1.2.1 (Tiger) or later, before installing Leopard.
Thank you,
AppleIf Leopard came pre-installed and this is a new machne, then the disks that came in the box should let you archive install preserving users & network settings. The disks have a grey label, and if you get more than one use disk #1 for this procedure.
Hold down the "option" (also known as "alt" on the new keyboards) key when starting up with disk #1 in the optical drive. Select the install disk icon on the grey screen and click the arrow. Then when you get to the "select destination pane, click the options button after selecting your hard drive as the destination. In options A& I preserving should be checked by default, if not, select them. Click "ok" to dismiss the options pane, then run the installation.
If this does not work for you, call apple support. They want everything to work. Be patient, they are real busy these days.
Slim -
Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
Since we upgrade SAP, the layout changed.
For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
What could it be?
Thanks in advance.Hi!
lines are not duplicated, they just printed on different pages:
- if doc has just 2 lines - printed form is good
- if doc has 3 items, two of them are printed on the first page, 3d - on the second page
- if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
SAP re-installation for all users will take too much time. May be exist any other option that we can try?
we really appreciate your help
Natalia -
Problem after upgrading to ICS 4.0.4
i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
thanx for your helpDo you have many pictures?
Have your tried to reinstall the phone software using SUS to check if the problem remains?
http://www.sonymobile.com/gb/tools/update-service/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Several problems after upgrading to iO6
My iphone is with multiple problems after upgrading to iOS 6. Applications are closing alone, the screen goes black and then back to the home screen. does not connect to internet (3G and Wi-Fi) connections as cutting. Throw another quick update to fix this, or do I have to change to the Galaxy SIII; Iphone is Terrible!!
Try the Padma extension.
*Padma: https://addons.mozilla.org/firefox/addon/padma/ -
Apple TV problem after upgrading to iTunes 7.5
PROBLEM: After upgrading to 7.5, Apple TV no longer recognized iTunes and vice versa.
ATTEMPTED SOLUTIONS: Removed and reinstalled iTunes 7.5 from scratch. Reset @TV to Factory Defaults and reconfigured. Removed Apple TV from iTunes Preferences/Apple TV/Remove Apple TV.
iTunes no longer finds @TV, either in the Preferences/Apple TV pane, or in the Device List. Everything worked perfectly before the 7.5 upgrade. All other features and devices working fine. Have reviewed all postings and eliminated the possibility of firewall or port problems.
Suggestions welcome! Thanks.I have partially resolved the problem. Something with the 7.5 upgrade changed the network protocols being used by the Apple TV... switching to a wired network from end to end with a full shut down and reboot has the @TV back online... I am still working on trying to solve the wireless side of the equation.
-
I'm using iPhone 5
Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.Basic troubleshooting
Reset
Restore with backup
Restore as new ( better ) -
Problem after upgrading to iPhone iOS 7
Gentlemen Apple
I have a problem after upgrading to iPhone iOS 7
Required to calculate the icloud lost me
<Email Edited by Host>I have the same issue after upgrad my iphone 5 to IOS7?? what is the reason and what is the solution?
Maybe you are looking for
-
HT2534 how do u remove a credit card from account
i cant remove a credit card from my iphone and it wont let me download any free apps or upgrade
-
Firefox 3 has a context menu for the drop down list of the Location Bar. One option on this menu I used often is "Open Link in New Tab" -- quite convenient. This context menu has disappeared in Firefox 4. Can I get it back?
-
Build an application installer and include files referenced in the code
I want to make an application installer of my project, and I need to include a picture that I'm using in the code. This picture is used both in the vision assistant and in a low level color pattern match. What I need is some way to reference this pic
-
What if quick time won't down load onto computer
Having trouble, Just bought the ipod touch and when i attempt to down load itunes it pops up with an error message that says quick time did not install completely and that itunes requires quick time. that is all the information is gives. please help
-
How to get Iweb on OS 10.9.2? and where to download?
I build some sites on my old Imac, and now I would like to go on maintaing the sites on my new Macbook pro. How to do that?