Login Script for HP Thin Clients using Citrix

Hi
Could someone please assist me with this.
I use a login script on my domain but I am now joining the HP Thin Clients onto the domain which will use SSON (Single Sign ON) which will automatically load citrix and use the current username and password to sign into the citrix session
Is there a command I can use that will "check" the version of windows and if this is Windows 7 embedded Standard edition, then it will bypass all the commands and go to the end of the script.
I was trying something like this IF "%OS Version%" == "Microsoft Windows 7 Embedded Standard" goto END
I know you can use this for a "Computer Name" but we have so many terminals and would need to store all the names of them on the servers.
Please can someone give me some advise on this.
Thanks
Martin

Hi,
As far as I know, you can user command systeminfo | findstr /B /C:"OS Name" /C:"OS Version"to check current system edition in
Command Prompt. However, as I'm not fimilar with script, to need more assistance for your problem, it would be better to provide your question at script center.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
Roger Lu
TechNet Community Support

Similar Messages

Secure login script for my site

I can not seem to find a idiot proof login script for my
site, can someone help out PLEASE i'm going in sain!!!
can not be be that hard or it is?
thanks for any help.

Well if you want something really easy to use, and are
willing to lay down a bit of dough, check out this DW extension.
http://www.interaktonline.com/Products/Dreamweaver-Extensions/MXUserLogin/Overview/
I have it, and it's pretty simple to use.

Upgrading beyond VMWare Horizon View Client 4.6 for t5545 thin client

upgrading beyond VMWare Horizon View Client 4.6 for t5545 thin client
Noticed there is nothing beyond 4.6.0. Rev. A April 12th, 2011 for the Thin Client Add-on, reference:
http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3719106&swLangOid=8&swEnvOid=4030
Are there any plans by HP, to bring this current with another release?
Thanks
Respectfully,
Mark Garza

Response from Orbograph support:
Hi Ryan,
This is caused by a known bug in an older version of our
software. Please contact Jack Henry Vertex Support for an upgrade or hotfix.
Thanks and let me know if you have any questions.
Brad Hudson
Client
Support Engineer | 978-667-6037 x5194 (O) | 888-ORBOGRA (Support)
[email protected] | www.orbograph.com

How to get rid of J2EE Login screen for each time Client App run?

hi there,
How to get riud of J2EE login screen for each time client application r un?
regards,
elvis

in the j2ee tutorial they say that you should run like this:
runclient -client <appjar> -name <name> -Dj2eelogin.name=guest -Dj2eelogin.password=guest123
the only thing is that it did not work for me...let me know if it works for you.
chukii

How do I connect my Centro to the Internet via bluetooth over PC's Internet? Where is Centro's PPP Connection Type? How do I setup Login Script for bluetooth connection?

I am trying to set up bluetooth on the Centro to connect to the internet via my PC's internet.
HotSync over bluetooth works successfully.
Computer specs: Toshiba P205-S6277; Bluetooth Stack v5.10.04 (currently using); Bluetooth Monitor v3.01 (to use Vista's built-in bluetooth)
I think I have narrowed my problem down to 3 things.
(1) Finding Network Access properties (to allow connected devices to access the internet)
(2) Finding Centro's Network Connection Type: PPP
(3) Finding the correct Login Script to use
for (1) I think I've looked everywhere; found nothing on Network Access.
Checked control panel: only Bluetooth Local COM
Right-clicked bluetooth icon > Settings: File transfer, PAN Networking, PAN DHCP server, AV controls. Other bluetooth settings are for file transfer or object push. I don't see anything like this.
I'm stumped on (2). It seems as if palm removed this option under Centro's Advanced network settings .
Nearly all the forums that I read says to choose Connection Type: PPP.
(3) Found 2 scripts that seemed would work. I don't know how it exactly works but it sounds workable.
First script:
Send: CLIENT
Send: CLIENT
Wait for: CLIENTSERVER
End:
Script 1 Connect Log:
=======================================
Connect Log
S: client
S: client
R:
Err: 0x121F <<<netErrUserCancel b/c I canceled it.
Not connected
========================================
I canceled it because the process would stay on "Signing In" then it automatically "Canceled" itself.
Second script:
Send CR:
Delay: 1
Send: CLIENT
Wait For: CLIENTSERVER
End
**UPDATE** I found on this forum (Reply # 3689) that the script is needed only if you are using Palm OS 4 or under. Centro uses Palm OS 5.49121. Can anyone support this?
Even without the script it has problems "Signing In".
I'm currently reading this site and trying out its decribed methods. I will update this thread when I get the results.
I'm using the Centro. And If anyone's been able to successfully connect to the internet on the Centro via a bluetooth connection to the PC WITHOUT 3rd party applications, please share. If not, please share any ideas.
Thanks!
-Eric
Post relates to: Centro (AT&T)
Message Edited by naisanza on 01-01-2009 02:26 PM

I've been going at this for days, and have probably exhausted all the proposed solutions on the first 3 pages of various google searches. I'm getting the feeling that Vista users are pretty much SOL for the time being.
For the record, I just tried out a few of the solutions (mRouter & SoftickPPP) on XP and they work perfectly.
Post relates to: Centro (Verizon)
Message Edited by Cogwheel on 02-13-2009 09:45 AM

Hanging Login Script for Unmappable Drives

I currently have a login script running on laptops at my work. We consist of two sites, each with their own domain. At Site 1 several drives are mapped using GPOs as the laptops are all bound to Site 1. If users head over to Site 2 though, they experience
hanging times (that I am only able to contribute to the fact that Site 2 can't resolve these aformentioned drives). Login time can be up to about 40 seconds compared to the normal 4 seconds when at Site 1. Is there a way to just tell the PC to skip over these
drive mapping if they aren't found immediately?

Hi,
Have you tried to use Net use command to finish this job?
Use the Net Use command to map or disconnect a drive
You can use the net use command for batch files and scripts. To use the net use command to map or disconnect a drive:
To map a network drive:
Click Start, and then click Run.
In the Open box, type cmd.
Type net use x: \\computer name\share name, where x: is the drive letter you want to assign to the shared resource.
To disconnect a mapped drive:
Click Start, and then click Run.
In the Open box, type cmd.
Type net use x: /delete, where x: is the drive letter of the shared resource.
Roger Lu
TechNet Community Support

HPDM using WOL with thin clients using WES8

When using HPDM 4.6 with t620 clients using WES8, the Wake on LAN option does not work.It makes it impossible to do settings and deployments outside office hours.How can this be fixed?

Hi,
Thin clients normally have a low memory allocation on the video card (8mb to 16MB) so this can be a problem. Check to see if you can change this in the BIOS on the WYSE. If not connect at 256 Colours to reduce this. If you have pictures linked to products then their resolution will not be good but for SAP itself the difference is small. Also rename the SAPSS.AVI to .old if you have not already done so so that the splash screen does not come up when logging in.
In my multimedia testing on thin clients, unrelated to SBO, I found that both memory and processor power made a huge difference, which is contrary to thin client manufacturer claims. As an example I used a 200MHz/64MB TC for a flash application and sound was about 3 seconds behind the image and the image update would skip 3 to 5 frames when updating. Moving to a 800Mhz/128MB TC The frame refresh rate was almost perfect and the sound was only about 0.5 seconds behind. I would therefore test on a more powerful thin client to see if it improves performance.
The S30 is a 400MHz (rated @ 533 on performance by AMD). Try a 1GHz TC with the maximum Video memory you can find.
We are currently using VXL Itona 800Mhz/128MB and do not experience too much rolling but we are using 256 colours.
Hope this helps.

Can I run ADF BC tester as thin client using embedded Tomcat or Websphere?

Hi folks,
I fired up JDev and ADF BC after a long hiatus and was pleased to find my old friend, the appmodule tester. I will probably be demo'ing the tester tomorrow at my new job.
I would like to show the AppModule tester as a thin client application that dynamically browses appmodules, viewobjects, etc in the same way that the 'fat client' tester works.
I poked around some but haven't found anything. Can someone chime in?
Thanks,
Andrew Wolfe

Nothing automatic - but it is quite simple to just create a JSF page and drag the ADF BC view objects from the data control onto the page - drop as Form - or as master detail and get the functionality working.
Then you just press run on the page and the integrated WebLogic Server starts your page in a browser.
See this for example:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/adfoverview/adfoverview.htm

Thin-client uses a RESTful Web Service

Hello everyone!
Once I've develop a few web services, it's time to "consume" them. I'm trying to develop a thin-client in JAVA (with the netbeans ide) but I haven't found the best way to do it.
So, which is the best way to create a LabVIEW RESTful webservice?
Obviously, JAVA is an option, how about create a client with another VI?
Greetings!
Francisco José Gómez López
Software Engineer

1) Are you trying to create a RESTful web service in LabVIEW?
or
2) Are you wondering about creating a thin client to consume the web service?
A1) Web Services in LabVIEW
A2) LabVIEW WebUI Builder You can create a VI to act as a client for your web services, but not a thin client (i.e. running in the browser)
Chris
Certified LabVIEW Architect
Certified TestStand Architect

Sharing Primary Site and Secondary Site's SUP WSUS for non-SCCM client use

I was wondering if the WSUS deployed for the SCCM's SUP can also be (re)used for non-SCCM clients.
Our SCCM infrastructure are mainly used to manage Workstations whereas our back-end servers are not deployed with SCCM agents due to overlapping SLAs and responsibilities. However, we would like to take advantage of WSUS's centralized update repository without
each back-end servers initiating connection to the Internet to get their updates.
Is this possible?

No. WSUS servers that are used for SUPs are controlled by ConfigMgr and cannot be used outside ConfigMgr.
Torsten Meringer | http://www.mssccmfaq.de

Required to create a script for base table update using XMLSTORE package.

Hi can anybody provide me some help full suggestion on how to update base table using XMLSTORE package.
I created a simple script for Employee table and can able to do the basic operation like Insert and update on the table.
Query is as follow's
DECLARE
insCtx DBMS_XMLSTORE.ctxType;
rows NUMBER;
xmlDoc CLOB :=
'<ROWSET>
<ROW num="1">
<EMPLOYEE_ID>922</EMPLOYEE_ID>
<SALARY>1801</SALARY>
<HIRE_DATE>17-DEC-2007</HIRE_DATE>
<JOB_ID>ST_CLERK</JOB_ID>
<EMAIL>RAUSSJACK</EMAIL>
<LAST_NAME>JACK</LAST_NAME>
<DEPARTMENT_ID>20</DEPARTMENT_ID>
</ROW>
<ROW>
<EMPLOYEE_ID>923</EMPLOYEE_ID>
<SALARY>2001</SALARY>
<HIRE_DATE>31-DEC-2005</HIRE_DATE>
<JOB_ID>ST_CLERK</JOB_ID>
<EMAIL>PATHAK</EMAIL>
<LAST_NAME>PRATIK</LAST_NAME>
<DEPARTMENT_ID>20</DEPARTMENT_ID>
</ROW>
</ROWSET>';
BEGIN
insCtx := DBMS_XMLSTORE.newContext('EMPLOYEES'); -- Get saved context
DBMS_XMLSTORE.clearUpdateColumnList(insCtx); -- Clear the update settings
-- Set the columns to be updated as a list of values
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'EMPLOYEE_ID');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'SALARY');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'HIRE_DATE');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'JOB_ID');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'EMAIL');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'LAST_NAME');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'DEPARTMENT_ID');
-- Insert the doc.
rows := DBMS_XMLSTORE.insertXML(insCtx, xmlDoc);
--COMMIT;
DBMS_OUTPUT.put_line(rows || ' rows inserted.');
-- Close the context
DBMS_XMLSTORE.closeContext(insCtx);
END;
SELECT employee_id, LAST_name FROM employees WHERE employee_id = 114;
DECLARE
updCtx DBMS_XMLSTORE.ctxType;
rows NUMBER;
xmlDoc CLOB :=
'<ROWSET>
<ROW>
<EMPLOYEE_ID>114</EMPLOYEE_ID>
<LAST_NAME>PRABHU</LAST_NAME>
</ROW>
</ROWSET>';
BEGIN
updCtx := DBMS_XMLSTORE.newContext('EMPLOYEES'); -- get the context
DBMS_XMLSTORE.clearUpdateColumnList(updCtx); -- clear update settings
-- Specify that column employee_id is a "key" to identify the row to update.
DBMS_XMLSTORE.setKeyColumn(updCtx, 'EMPLOYEE_ID');
rows := DBMS_XMLSTORE.updateXML(updCtx, xmlDoc); -- update the table
DBMS_XMLSTORE.closeContext(updCtx); -- close the context
commit;
END;
Nowi want little modification on this above query like as i am passing static XML tags and i want it to pick the dynamic XML from web and use the XMLSTORE for the update.
and also for complex XML having 2-3 levels how this query needs to be changed.As i am new to this Oracle utillity any help from xepert will be a great help for me.
Thanks

Nowi want little modification on this above query like as i am passing static XML tags and i want it to pick the dynamic XML from webFrom a Web Service?
You'll need UTL_HTTP or HttpUriType interface to send the request and receive the XML response.
Search in the forum, there are already a lot of useful examples available.
and also for complex XML having 2-3 levels how this query needs to be changed.DBMS_XMLStore is OK for readily processing a canonical XML format (/ROWSET/ROW/COLUMN structure or alike).
However, if you have to deal with a more complex structure, you either have to :
- use a target object table that matches the XML structure
- preprocess the input document using XSLT to transform it to canonical format
That's why DBMS_XMLStore is not appropriate for multilevel documents, especially if they contain nested repeating groups.
In this case, XMLTable is a more flexible way of parsing the XML and process it relationally at the same time.
Depending on the size of the document, performance may be improved with schema-based object-relational storage.
For more help, please post a new thread in the {forum:id=34} forum, with the following information :
- database version (select * from v$version)
- a sample XML document (the complex one)
- DDL of your target table
- mapping between XML elements and columns (ie which tag goes to which column?)
- an XML schema (if you have one)

Login script for Airport Extreme

How do I get a login script into the modem setup for the Airport Extreme base station? All that is there is a pull down menu and the only thing on the menu is "None". Where is the admin utiltity looking for its login scripts?
Mike

Sorry --- No answer to this: just the same problem. Places I've tried are
Terminal Scripts (in /Library and ~/Library)
Login Scripts (in /Library and ~/Library)
and the same two in both
/Library/Application Support/Apple/Airport
/Library/Application Support/Apple/Airport/Configuration.
No dice with any.
Have you heard any more?
Carroll
1 GHz PB17 Mac OS X (10.4.2)

Build script for CXF web service using ant.

Hi, I am trying to build a CXF web service using ant. Does any one have a sample build script for it or steps (such as 1. build wsdl using java2wsdl task, 2. create a war etc.....) to follow to successfully build a web service using Apache CXF and ANT? Your help is greatly appreciated. I am using tomcat server and spring.
Thanks

Hi,
You can find and download sample of project and build scripts from
'Design and implement POJO Web services using Spring and Apache CXF, Part 1: Introduction to Web services creation using CXF and Spring':
http://www.ibm.com/developerworks/library/ws-pojo-springcxf/

Powershell script for when user last used their AD account to login or unlock a computer.

I want to create a method for determining when a users account would expire after 35 days of inactivity.
The issue would be not when they last logged on, as many of our users just lock their machines, but when they last logged on or unlocked any computer in the domain.
I am thinking a combination of last logon with a session unlock parameter.
In the system logs:
Event viewer id for logon unlock is 7.
SessionSwitchEventArg - SessionSwitchReason is SessionUnlock.
Is this feasible?

dsget user -inactive 30
Don't reinvent the wheel.
http://technet.microsoft.com/en-us/library/cc725702.aspx
¯\_(ツ)_/¯

Need an updated ARD login script for Mavericks

We've been using the script below for some years now with very few issues (other than for some reason the multiple returns at the end were needed for some stubborn machines).
The script continues to work nicely in 10.9--assuming that the cursor is in the name field of the login screen. More often than not, the cursor isn't. Because I've yet to teach myself/learn AppleScript, I wander around the lab and manually click into the name field.
A: Does anyone know how to tell the machines to place the cursor into the name field?
B: Could maybe a future OS update restore the good old days where the cursor blinking in the name field was the default?
name="username";
password="userpassword";
osascript <<EOF
tell application "System Events"
    keystroke tab
    keystroke (ASCII character 8)
    keystroke tab
    keystroke (ASCII character 8)
    keystroke return
    delay 0.5
    keystroke tab
    keystroke "$name"
    keystroke tab
    delay 0.5
    keystroke "$password"
    delay 0.5
    keystroke return
    keystroke return
    keystroke return
    keystroke return
end tell

The less than signs did not have a space. I took out the the first delay and the last return.
osascript <<EndOfMyScript
tell application "System Events"
keystroke “student”
keystroke tab
delay 0.5
keystroke “***”
delay 0.5
keystroke return
end tell
EndOfMyScript
got this error message
43:44: syntax error: Expected “given”, “in”, “of”, expression, “with”, “without”, other parameter name, etc. but found unknown token. (-2741)
Are you running your computers with an osx network user logon? I am.
thanks.
Hal

Login Script for HP Thin Clients using Citrix

Similar Messages

Maybe you are looking for