Logitech USB headset not detected

When I run lsusb | grep Headset, it shows that the usb headset is plugged in(grep audio did not work).
Sample output:
Bus 002 Device 005: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort USB Headset
But here's the problem, when I execute aplay -l, it gives me no sound cards found, though I even have a intel intergrated audio sound card.
I have gnome installed, so it uses pulseaudio, so I can't use alsamixer, but is I go into sound settings, it only says dummy output.
Other things to note:
- Do not have gnome-extra installed
- Have extra gst media codects
Thanks in advance,
Ahad

Hi daveodonoghue,
May i know does your machine works with other USB device? Please try update BIOS. If problem remain, please contact local lenovo for further assistance.
Worldwide Support Center phone list for ThinkPad, ThinkCentre and ThinkStation systems
http://support.lenovo.com/en_US/detail.page?DocID=HT036550
BIOS Update Utility for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad T420, T420i
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018785
Fred
T61 + X201i

Similar Messages

Logitech usb headset not usable is some apps

The device works fine in some apps (skype) but not in others (xlite, kiax, audacity). In the apps that it doesn't work you only see the default sound card /dev/dsp. There are no entries for /dev/dsp1 or /dev/dsp2. Very strange. It's not the headset because it works fine on another computer running Kanotix.
cat /proc/asound/cards shows the following:
0 [SI7012 ]: ICH - SiS SI7012
SiS SI7012 with ALC655 at 0xe000, irq 19
1 [UART ]: MPU-401 UART - MPU-401 UART
MPU-401 UART at 0x330, irq 10
2 [Headset ]: USB-Audio - Logitech USB Headset
Logitech Logitech USB Headset at usb-0000:00:03.1-1, full speed

You are not alone!!
Same problem with Plantronics.
I just bought their Audio 648 Stereo USB Headset and have exactly the same issue you mention at the outset:
Essentially, while my [Plantronics Audio 648] Headset is recognized in the list of devices in System Preferences > Sound, it doesn't do anything in terms of outputting or inputting audio
So Apple, what are you going to do?...
A lot of third party accessory manufacturers must be getting quite frustrated at the numer of complaints they get from Mac users, when it seems its the Mac OS which is to blame...

Logitech USB headset

We had a logitech USB headset for Dragon and it all worked fine.
Headset wires broke and so I replaced it with the closest one I could find (ML-341) to what we had.
So let's forget Dragon and just look at the MacBook Air.
When I am in System Preferences -> Sound it recognizes
a) the internal microphone,
b) the USB headset that came with Dragon (USB Ear - Microphone) and
c) the USB Logitech headset (Logitech USB Headset)
BUT as I switch amng all three in SOUNDS the Logtech doesn't work. (no blue input levels moving)
Volume is up and mute is off.
I don't have to box but I am certain it is a Mac compatible Logitech as that is what I went to buy.
I have looked at the utility MDDI? but don't see anything I should be changing there either.
What's up?
S

Hi
I have the Logitech Headset Premium Stereo 350 USB. Since the 10.4.6 upgrade (I think) it has not been working as it should, but it does still work. You need to go into System Preference > Sound > Output, have the headset selected as the output device, and then click the mute button on and off. Have the headset on while you do this and play with the volume control at the same time so you will hear when the sound does start to come from the headset. I have no idea why Logitech have not sorted this problem out yet, but the headset does work fine if you are prepared to fiddle around every time you use it.
While we are here I want to recommend SoundSource for quickly changing audio inputs and outputs. It doesn't help much with the current problem, however.
Edit: BTW on my headset, the flashing blue light is the mute indicator for the microphone. Pressing the centre button toggles it on and off.
Matthew Whiting

Can I conect a Logitech USB headset H540 to a MBP?

I have a Logitech USB headset H540 that my MBP wont recognise. I have plugged it in,opened the system preferences and clicked both the input and the output but the headset does not even show up. I have unplugged it rebooted the computer, and tried all sorts of options.

What does Logitech say about this? It's is their hardware so they should have a solution. It almost definitely has nothing to do with iTunes itself (the forum on which you posted). Did you read the installation instructions? Some devices may requires specific drivers for which there may not be one for Macs, or certain output settings in your system preferences panels which you will have to peruse if they are not specifically outlined in your user manual.

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error

Z77A-G43 B4 Error - Logitech USB Headset

Hey guys,
I've isolated the B4 error I'm receiving on boot to having my Logitech USB headset plugged in.
Also plugged in via USB are a Logitech G15 Keyboard, a Razer naga mouse, and a WD 2TB USB hard drive, but without the headset, I don't get the error.
Any thoughts on how to correct this? In the bios it shows up as 2 keyboards, so I'm wondering if the 2 logitech devices are a problem.
Thanks in advance.

What bios version do you have installed?

Why is logitech 350 usb headset not recognized by my MBP?

I have a Logitech Premium USB Headset 350 that is not recognized (at all) by my fairly new MBP, which is running OS X Lion 10.7.5. I have run all of the available software updates but the headset it still not recognized as an input or output device (under system preferences). When I plug it into my old PC (Dell Inspiron) it is recognized immediately and works perfectly. Can you please help me with this? I really want to me able to use the headset on my MBP.
I have emailed Logitech several times and they have been unhelpful!

Either read the headset user manual or contact the vendor. You should also try posting in the Bluetooth forum area.

USB Headset not working with alsa

I have a razer megalodon usb headset which works fine in ubuntu and windows but for the life of me I cannot get it to work in arch.
[exec@turbine ~]$ uname -a
Linux turbine 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64 Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux
1532:000e is the megalodon headset
[exec@turbine ~]$ lsusb
Bus 008 Device 004: ID 1532:000e Razer USA, Ltd
Bus 008 Device 003: ID 1532:000f Razer USA, Ltd
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 045e:028e Microsoft Corp. Xbox360 Controller
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 004: ID 046d:c227 Logitech, Inc.
Bus 004 Device 003: ID 046d:c226 Logitech, Inc.
Bus 004 Device 002: ID 046d:c223 Logitech, Inc. G15 Keyboard / USB Hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements]
Bus 001 Device 002: ID 13fe:3100 Kingston Technology Company Inc. 2 GB USB stick
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[exec@turbine ~]$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=Intel
HDA Intel, ALC888 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC888 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Intel,DEV=0
HDA Intel, ALC888 Digital
IEC958 (S/PDIF) Digital Audio Output
Here's a relevant part of dmesg:
usb 8-1: USB disconnect, address 2
usb 8-1: new full speed USB device using uhci_hcd and address 4
cannot find the slot for index 0 (range 0-1), error: -16
cannot create card instance 0
snd-usb-audio: probe of 8-1:1.0 failed with error -5
[exec@turbine ~]$ asoundconf list
Names of available sound cards:
Intel
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
alias snd-card-0 snd-usb-audio
alias snd-card-1 snd-hda-intel
# /etc/modprobe.d/sound.conf
#usb headset
alias snd-card-0 snd-usb-audio
alias sound-slot-0 snd-usb-audio
options snd-usb-audio index=0
Alsamixer does not show my megalodon usually but I have seen it under device list a couple of times but I have been unable to get it to play sound.
Any help fixing sound would be appreciated greatly.

Try running alsaconf, seems to help some people with a similar issue. http://www.nvnews.net/vbulletin/showthread.php?t=75433

USB devices not detected in VMware [SOLVED; Using Virtualbox instead]

I am running Arch as a host and XP on VMWare workstation 7. My primary purpose of installing XP on VMWare was to use my edit my Line6 POD (behaves as a usb sound card) and get my USB TV Tuner box to work. The big problem that I am facing is that VMWare is not detecting any USB device (not even my USB Hard Drive).
I have the usb controller installed.
Any suggestions?
Last edited by devadittya (2009-11-24 20:04:45)

I don't know vmware but with other virtual machines there is often a configuration option whether usb drives should be automatically mounted or not. Sometimes automounting also only works if the vm has the focus, i.e. is the active window.

Headset not detect on phone

Hi >>>> my xperia z2 does not detect the headset when i plug it into my phone
>>> NOTE 1<<<the model of the headset that came with my phone is >>> MH4010c
>>> NOTE 2<<< my headset work on other device
>>> NOTE 3<<< I try more than one headset but problem still
please help me to solve this problem

Re-install the latest update with PCC and check again, if that doesn't work then take it back to the store
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Phone USB disconnect not detected

On my one PC, PC Suite does not detect when I disconnect my E51 phone from the USB cable in PC Sync mode.
This one happens on this specific PC, so it must be a setup problem there.
I am running PC suite 6.85.14.1 on WinXP SP2 patched up to date. No problem on another box with same motherboard and software using the same phone.
If I connect in data transfer mode, I use the "safely remove hardware" function of WinXP before I disconnect and all is fine. This is not available in PC Suite mode.
If I unplug the cable from the phone in PC suite mode, PC Suite does not detect that the phone is disconnected, no matter how long I wait.
After this, the whole USB system seems to be confused. No other USB devices are detected when plugged into any other USB port. After reboot all is fine again.
I guess this is a Windows problem rather than a PC suite problem.
Any idea what is going wrong and how to correct this?

i had other similar problem with usb devices, maybe when we use more usb devices could be a conflict on system, does exist a tool that clean up all old usb connection?
bye.

Error: USB Headset not recognized

HP Pavilion dv7 Notebook PC WV703AV
OS: Windows 7 Home Premium - 64bytes
Error: No error... just not working
Hello, I just bought an USB headset SOMIC and after plugging it to the PC I realize it wasn't working. At the beginning I got mad thinking that it was about the headset, however after testing it in several computers with different Operative Systems(windows 7 x64, windows XP x32 & x64) I realize that actually they worked perfectly... so whats is coming on with my PC? - I thought.
I tried by doing the following:
    1st - Changing it of USB Port - I tried the 4 of them.
    2nd - Updating the sound Drivers.
    3rd - Installing the Headset's drivers.
    4th - Downloading & Reinstalling the sound drivers.
    5th - Disabling the computers drivers in order to only use the headset's drivers.
I am getting so angry that I am planning to reinstall my OS, however before doing it I would like to know if you could help me in this matter . It is clear that it is ABOUT THE USB CONDITION OF THE HEADSET as I have others with normal connectors and they work perfectly. Moreover, I JUST REALIZE that AUDIO BEATS monitor the sound settings and it has NO USB CONNECTOR COMPATIBILITY (only HDMI or NORMAL MALE CONNECTORS).
So I tried disabling/uninstalling HP BEATS however it doesn't appear anywhere. Now I dont know what can I do to sort out this issue I am having please help me before I burned my PC . Pleasee I really need your help.
I look forward to hearing from you, thanks in advance.
Santiago.

I too have this problem. Bump.

Hp Pavilion DV4-1235ee No sound & Usb port not detecting.

In my laptop Hp Pavilion dv4-1235ee there is no sound coming from the internal speakers. If I connect external speaker its works fine. Usb port is not detecting now. any help will be appreciated.

What is the current Operating system on your notebook? I suspect we have issue with internal speaker on hand...but would like to reinstall the Audio Driver and check...
Again for the USB, we can try and install Chipset driver and check...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Logitech USB Headsets non-responsive without reboot.

When I plug certain USB headsets (Logitech) into my MacBook Pro, despite the device being recognised in the Sound Control panel and the microphone working, no sound comes through the headset speakers, unless the MacBook Pro is rebooted WITH the headset plugged in. Since no device driver is supplied or needed with it I assume this is a bug in OS-X.
I can go to the Sound control panel and toggle between built in and the headset as much as I like, unless the headset it plugged in when the Mac starts up, there's no sound from the headset (internal speakers work fine when selected).
Anyone else had this problem?

I found the exact same problem. My Logitech headset has been working flawlessly for over a year, even when I changed to MacBook Pro. Recently, however, I need to plug it in before restart to have it working at all. Additionally, as soon as I unplug und replug it, it stops responding and restart is the only remedy.
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)

Logitech c920 Webcam not Detected in Skype 7.6.0.103

My Logitech C920 Webcam was working perfectly...and still works on all other apps on my PC (Windows 8.1) desktop.....but now Skype does not detect the webcam at all so no video calls. I'm missing my grandsons... Can anyone help me? Thanks.Michael...

WHOBRADIO wrote:
My Logitech C920 Webcam was working perfectly...and still works on all other apps on my PC (Windows 8.1) desktop.....but now Skype does not detect the webcam at all so no video calls. I'm missing my grandsons... Can anyone help me? Thanks.Michael...Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

Logitech USB headset not detected

Similar Messages

Maybe you are looking for