Logon Failed

I have 12 years of working with Crystal Reports and have never seen this error. Version of Crystal is 2008 and the data is in SQL Server. The database connection is OLEDB and the report is connecting to the database using the sa account. The sa account has full rights to the database.
The report was written and was working great with no issues.
Recently it only works about 20% of the time. The other 80% of the time this error occurs after entering the user sa login and password
Login failed
Details : ADO Error Code 0X800004005
Source: Microsofr OLE BD Provider for SQL Server
Description : [DBNETLIB][Connection Open
(SEC Create Credentials()).]SSL Security error.
SQL State:08001
Native Error : 18 [Database Vendor Code :18]
When I am in a period of time when this error is showing I cannot create ans ODBC connection either. BUT when the report is running fine I can create the ODBC.
Any ideas and help as to what is going on there would be greatly appreciated.

Hi,
It looks like something to do with your SQL server. Try to connect this report to a different SQL server and see whether this issue exist. Then you can narrow down the source of the problem.
From SQL server 2005, there is a setting in the server (surface area settings) to allow or deny any remote (client) connections. Again the chances are far to get this setting change automatically.
Regards,
Munir

Similar Messages

"Program terminated in remote system NONE: Logon failed" when adding a new table

Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
Christian

First thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
 One monitoring job (master job)
 One master controller job
 At least one data load job
 One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
 At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
 Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
 The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
 Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
 The Number of required data transfer jobs ,
 plus one background work process for Central Master (Monitoring) Job (only one per system!),
 plus one background work process for Master Controller Job,
 plus 3-5 additional empty background work processes (recommended per configuration),
 plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian

Getting Logon Failed error connecting to SAP R/3 with Crystal

I have Crystal Reports 2008 and also the SAP Integration Kit installed on my desktop. I've imported the transports into my DEV and QAS systems and am trying to connect directly to R/3 from Crystal using the SAP Table, Cluster or Function choice.
I receive the error:
Logon failed. Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
I'm using a logon that has full rights within SAP. It recognizes my password because when I try a password that I know is wrong I get a different error message: Logon failed. Detail: Name or password is incorrect. I receive the same error in PRD even though I have not imported the transports into that client.
I have Crystal Server but am not trying to use that at the moment. Just Crystal Reports as a standalone product. If I've left something out please let me know.
Thank you,
Kevin Scheeler

Hi Kevin,
take a look at the Installation Guide for the SAP Integration Kit which includes a detailed list of authorizations per use case in the appendix
the documentation is available on help.sap.com
Ingo Hilgefort

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Database Logon Failed after first report

I have a Windows Server 2003 x86 server running IIS6 and ASP.NET. On this server, I have two different web forms set up to export Crystal Reports to PDF.
My problem is that only one of these reports can run. For example, I open report 1 and can then reopen (generate PDF of) report1 as many times as I want. I cannot open report 2 - I get a "Database Logon Failed" error message. If I restart the server, I can generate a PDF of report 2 successfully and as many times as I want but report 1 will get a "Database Logon Failed" error message.
Has anyone seen this behavior before? My code is very concise and manually closes the report document (and forces the garbage collection to run) once the PDF has been generated. However, for some reason, the report is staying in memory and is trying to run again even though it has been closed. It is driving me crazy.
Thanks in advance for any assistance you can offer.

Let's get the server confusion out of the way.
A "server" runtime install is an msi file called CrystalReports11_5_NET_2005.msi.
The msi is in a download called Crystal Reports XI Release 2 - FP x.x .NET Server Install (where x.x refers to SP or FP version (e.g.; Crystal Reports XI Release 2 - FP 5.6 .NET Server Install)
So, this gives you an easy way of installing the CR runtime on a server (e.g.. Win 2003 server). No CR server (RAS) implication here. To install the runtime, all you have to do is run the msi, provide the keycode when prompted and the runtime is installed. You should see the directory C:\Program Files\Business Objects\Common\3.5\bin created. No pretty interface, etc. If you want a pretty interface, you create your own setup project or msi using the CR msm files.
Hopefully this clears up the "server" confusion.
To the actual issue on hand.
You say this works with older "Crystal Reports viewers" installed on a WIN 2003 64 bit server. My question is; does this CR XI r2 based app work anywhere? Your dev box? Staging server?
Ludek

Crystal Report 10 and Visual Basic 6 - logon failed in crystal report viewe

Guyz,.
Report viewer is showing logon failed, pelase help me, i can able to view the data from rs1(recorset).
please hellp me to fix this issue, i need to pass the sql query to my pre designed Crystal report which has all the field as same as SQL query.
Please suggest me if any other alternate way to do this , my code is below.
Environment : Crystal Report 10, Visual Basic 6
cr_preview -> CrystalActiveXReportViewer
RepName -> Fiename and path of the Crystal report is designed from Crystal Report Designer.
Function show_rep(Sql As String, RepName As String)
Dim crystal As CRAXDRT.Application
Dim report As New CRAXDRT.report
Dim rs1 As New ADODB.Recordset
    If rs1.State Then rs1.Close
    rs1.Open Sql, cn, adOpenStatic, adLockReadOnly
    Set crystal = New CRAXDRT.Application
    Set report = crystal.OpenReport(RepName)
    report.DiscardSavedData
    report.Database.SetDataSource rs1
    'cr_preview.Refresh
    cr_preview.ReportSource = report
    cr_preview.Visible = True
    cr_preview.ViewReport
    Do While cr_preview.IsBusy
        DoEvents
    Loop
    cr_preview.Zoom 100
    If rs1.State Then rs1.Close
    Set rs1 = Nothing
Set crystal = Nothing
Set report = Nothing
End Function

Hi,
Please refer to the link for the list of example, [click here|http://pscode.com/vb/scripts/BrowseCategoryOrSearchResults.asp?optSort=Alphabetical&lngWId=1&B1=QuickSearch&txtCriteria=crystalreport+10&blnWorldDropDownUsed=TRUE&txtMaxNumberOfEntriesPerPage=10&blnResetAllVariables=TRUE]
Regards,
Clint

Crystal report logon Failed Error

Dear All
We have installed BOBJ Edge 3.1 Server at Windows Server.
We insalled Crystal Report 2008 at one of our Laptop. (Client).
When we tried to create a sample report,
we selected a existing universe from the BOBJ Server. When we selected it ask me for the server connection details. It connected and showed me the existing unverses.
I selected say eFashion - and picked some fields and Click OK.
Then it givs logon failed error.
Can some one explian me where i am missing
REgards,
Venkat

Hi Venkat,
If the Universe is based off an ODBC connection, then the same ODBC connection (with the same name) needs to be present on the client machine too.
So, like Don suggested, the client machine would need the same DB client too.
Open the Universe in the Universe Designer. Go to File > Parameters > Edit. This is where you see all the connection information of the Universe.
-Abhilash

Logon Failed when exporting crystal report to PDF

Hi, I am Teguh
i want to ask about error when export crystal report to pdf
error message
CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed
[LogOnException: Logon failed.]
   .I(String , EngineExceptionErrorID ) +506
   .D(Int16 , Int32 ) +537
   .C(Int16 ) +10
   CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +577
   CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType) +141
   Falcon.CRTransferSlip.Page_Load(Object sender, EventArgs e) in C:\inetpub\wwwroot\Falcon\CRTransferSlip.aspx.vb:77
   System.Web.UI.Control.OnLoad(EventArgs e) +67
   System.Web.UI.Control.LoadRecursive() +35
   System.Web.UI.Page.ProcessRequestMain() +750
environment:
OS : Windows server 2008 standard SP1
IIS: Version 7.0
SQL: Sql server 2000
VS : Visual studio 2003
i really confused with this error,
please help me for this problem
many thank's

Hi Ludek
Thank you for your response. I have installed SP3 and ProcMon and still the same result.
I applied a filter on ProcMon to filter out items where the path contains 'export'.
There are a few items where the result is 'NAME NOT FOUND' but I don't think it necessarly had anything to do with the barcode. These include items such as 'EXPORT\MailDestType','EXPORT\DisableExportLiveOfficeSupport'','EXPORT\ExportDirectory' to name a few.
What drew my attention was the ACCESS DENIED result on specifically the EXPORT\PDF folders. The detail for these are Desired Access : All access, however the very same entry appears a little futher on as a SUCCESS but this is detailed as Desired Access: Query Value.
So in summary it looks something like this:
User : Server\XXX
Operation : RegOpenKey
Path : HKU\.DEFAULT\Software\Business Objects\Suite 12.0\Crystal Reports\Export\Pdf
Result : ACCESS DENIED
Desired Access : All Access
User : Server\XXX
Operation : RegOpenKey
Path : HKU\.DEFAULT\Software\Business Objects\Suite 12.0\Crystal Reports\Export\Pdf
Result : SUCCESS
Desired Access : Query Value
There are a few other entries that follow this pattern that exists in other locations such as HKLM\Software...
Could this 'ACCESS DENIED' be the problem? and If so how do I, and should I give user XXX this ALL Access its looking for.
Regards
Elroy

Logon failed. Details: mscorlib (Crystal report error during print &export)

Hi,
I'm encountering the problem that the crystal report is working fine in the staging server I developed.
However, after I transported to live server the report having problems when printing and exporting.
Below is the error message prompts to me.
Logon failed. Details: mscorlib : Could not find file 'C:\Inetpub\wwwroot\rptPrintSummaryConfineSpace.xml'. Error in File C:\WINDOWS\TEMP\rptPrintSummaryConfineSpace {2D72226E-816A-4D9B-BF93-C9077001F09C}.rpt: Unable to connect: incorrect log on parameters.
I hit this error when I click OK button on export or print option page.
My temp folder at windows is given full permission for IIS_WPG and ASPUSER.
Please help to resolve my problem thank you very much.

What version of Crystal Reports?
What CR Service Pack are you on?
What is the database?
How are you connecting to the databse (ODBC, OLE DB, etc.)?
- Ludek

Logon failed, with some Chinese description

Dears,
We are running the SAP Crystal Reports 2011 client (on a Windows PC) to
built reports on DB tables residing on ERP ECC 6.0 EhP5 system,
installed on IBM Power System i V7R1.
Going through the necessary steps after starting the Crystal Reports
client :
Report Wizard -> Create New Connection -> SAP Table, Cluster, or
Function, I get a list of all the SAP systems, which are configured in
the conventional SAP GUI installed on the Windows PC (730, patch level 1).
After choosing the ERP PRO system for example, I receive a dialog
through which I enter the client no., user & password.
When I click the 'Finish' button, I get a dialog depicting two lines :
The first line = 'Logon failed.'
The second line = 'Details:...' then a sequence of some Chinese (I
asssume) characters !
Kindly advise on how to solve this problem.
(Note : please find below a screen shot depicting the last dialog encountered.)
Thank you in advance for your cooperation.
Regards.
Reda

Dears,
The following is the solution for the above mentioned problem :
Right Click on the entry of interest among the list of entries in SAP GUI, select 'Properties', click the 'Code Page' tab, select the 'Default' option in the drop down list labeled : 'Language'
( The previous option chosen in the drop down list was 'English')
Thanks.
Reda

Logon fail when creating Connection in Crystal Reports SP3

Greetings,
I am working on an issue where we have installed the SAP GUI 7.10, Crystal reports 2008 SP3, and SAP IK FP 3.1.
We are testing the access to ECC. We have setup the server in the GUI and can successfully logon to the server in the GUI. We open Crystal Reports, select File -> New -> Standard Report, scroll down to SAP Table, Cluster, or Function, and the SAP System Logon window pops up.
Select the ECC system, click Next, and input the logon info for the system. Click Next and do not check the box for generating a RFC trace file, then click finish.
This results in a new window popping up. The title is Crystal Reports, and the contents of the window are as follows...
Logon failed.
Details: <bunch of Chinese characters>.<more Chinese characters>
We are using the language setting of EN on the SAP server, and in the GUI configuration. Not sure why we are getting Chinese (we have verified it as Chinese with a person here who can read some Chinese. he says that the first part is "something about server not valid")
We asked a user who does have a working install using CR 2K8 SP2 and SAP IK SP2 to try the login and he had the same results on this system.
We can use the same SAP account to login to InfoView without an issue.
Any suggestions?

i had the same problem.
it has something to do with the sap gui logon settings.
1. go to your SAP logon ECC-properties (start sap-logon; right-click on your ecc connection)
2. go to the Codepage-Tab
3. set Language to default (standard)
then it should work.
br
thomas

Database logon failed. Database Vendor Error Code: 0

Hi all,
I'm running a java web application and use crystal report XI.
It works normally. One thing is : i would like to change the "Connection URL" when runtime.
These are my config:
_CRConfig.xml :
<?xml version="1.0" encoding="utf-8"?><CrystalReportEngine-configuration>
    <reportlocation>../..</reportlocation>
    <timeout>10</timeout>
    <ExternalFunctionLibraryClassNames>
          <classname> </classname>
          <classname> </classname>
    </ExternalFunctionLibraryClassNames>
<keycode>B6W60-01CS200-00GEGC0-0EX1</keycode>
<Javaserver-configuration>
<DataDriverCommon>
     <JavaDir>C:\Business Objects\j2sdk1.4.2_08\bin</JavaDir>
    <Classpath>C:\Business Objects\Common\3.5\java/lib/crlovmanifest.jar;C:\Business Objects\Common\3.5\java/lib/CRLOVExternal.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaServerCommon.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJDBCServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBXMLServer.jar;C:\Business Objects\Common\3.5\java/lib/CRDBJavaBeansServer.jar;C:\Business Objects\Common\3.5\java/lib/external/CRDBXMLExternal.jar;C:\Business Objects\Common\3.5\java/lib/external/log4j.jar;C:\Business Objects\Common\3.5\java/lib/cecore.jar;C:\Business Objects\Common\3.5\java/lib/celib.jar;C:\Business Objects\Common\3.5\java/lib/ebus405.jar;C:\Business Objects\Common\3.5\java/lib/corbaidl.jar;C:\Business Objects\Common\3.5\java/lib/external/freessl201.jar;C:\Business Objects\Common\3.5\java/lib/external/asn1.jar;C:\Business Objects\Common\3.5\java/lib/external/certj.jar;C:\Program Files\Business Objects\Common\3.5\java/lib/external/jsafe.jar;C:\Business Objects\Common\3.5\java/lib/external/sslj.jar;C:\tomcat\common\lib\oracle-driver.jar${CLASSPATH}</Classpath>
     <IORFileLocation>${TEMP}</IORFileLocation>
     <JavaServerTimeout>1800</JavaServerTimeout>
     <JVMMaxHeap>256000000</JVMMaxHeap>
     <JVMMinHeap>32000000</JVMMinHeap>
     <NumberOfThreads>100</NumberOfThreads>
</DataDriverCommon>
<JDBC>
     <CacheRowSetSize>100</CacheRowSetSize>
     <JDBCURL>jdbc:mysql://Komodo-vmw:3306/warcraft</JDBCURL>
     <JDBCClassName>com.mysql.jdbc.Driver</JDBCClassName>
     <JDBCUserName>root</JDBCUserName>
     <JNDIURL></JNDIURL>
     <JNDIConnectionFactory></JNDIConnectionFactory>
     <JNDIInitContext>/</JNDIInitContext>
     <JNDIUserName>weblogic</JNDIUserName>
     <GenericJDBCDriver>
          <Default>
               <ServerType>UNKNOWN</ServerType>
               <QuoteIdentifierOnOff>ON</QuoteIdentifierOnOff>
               <StoredProcType>Standard</StoredProcType>
               <LogonStyle>Standard</LogonStyle>
          </Default>
          <Sybase>
               <ServerType>SYBASE</ServerType>
               <QuoteIdentifierOnOff>OFF</QuoteIdentifierOnOff>
               <DriverClassName>com.sybase.jdbc2.jdbc.SybDriver</DriverClassName>
               <StoredProcType>Standard</StoredProcType>
               <LogonStyle>MySQL</LogonStyle>
          </Sybase>
     </GenericJDBCDriver>
</JDBC>
<XML>
     <CacheRowSetSize>100</CacheRowSetSize>
     <PreReadNBytes>4096</PreReadNBytes>
     <XMLLocalURL></XMLLocalURL>
     <SchemaLocalURL></SchemaLocalURL>
     <XMLHttpURL></XMLHttpURL>
     <SchemaHttpURL></SchemaHttpURL>
</XML>
<JavaBeans>
    <CacheRowSetSize>100</CacheRowSetSize>
     <JavaBeansClassPath></JavaBeansClassPath>
</JavaBeans>
</Javaserver-configuration>
</CrystalReportEngine-configuration>
_JSP file :
public ConnectionInfos setLogon() {
          String dbUser = "root";
          String dbPassword ="root";
          ConnectionInfos oConnectionInfos=null;
           try
                //Create a new ConnectionInfos and ConnectionInfo object;
                oConnectionInfos = new ConnectionInfos();
              ConnectionInfo oConnectionInfo = new ConnectionInfo();
              //Set username and password for the report's database
              oConnectionInfo.setUserName(dbUser);
              oConnectionInfo.setPassword(dbPassword);
          PropertyBag pro = new PropertyBag();
              Map<String, String> bag = new HashMap<String, String>();
               bag.put("Connection URL", "jdbc:mysql://Komodo-vmw:3306/warcraft");
               bag.put("Server Type", "JDBC (JNDI)");
               bag.put("Database DLL", "crdb_jdbc.dll");
               bag.put("Database Class Name", "com.mysql.jdbc.Driver");
              oConnectionInfo.setAttributes(new PropertyBag(bag));
              //Add object to collection
              oConnectionInfos.add(oConnectionInfo);
          } catch(Exception se) {
               se.printStackTrace();
               System.out.println("[error in setLogon ]");
          return oConnectionInfos;
And i got error every times i run the report :
Database logon failed. Database Vendor Error Code: 0
Please help me.Thank you so much!

Hi quang.
can u tell me how to solve this issue? on trying to open a report am facing this issue!
TIA

Logon Failed using Crystal Report XI

I wrote a VB 6 app that has the CRViewer and calls (.rpt's). The ".rpt's" use a MS Access 2003 database. This database DOES NOT have any security in the way of passwords. This application runs on a "stand-alone" system NO SERVER IS INVOLVED.
The program and Crystal Reports work fine on my system. About a week ago, I tried to install Crystal Reports Release 2. I had a lot of problems. I deleted it and re-installed CR from my install cd's. Ever since then, I have had the following problem:
I use MS Package and Deployment system to create the "Setup and Install" package. Ever since the above problem with Release 2, when I install and run the package on a different system, when I try to access the reports, I am getting a "Logon Failed" error message. PRIOR to trying to install Release 2, I never had this error message. I have no idea what is causing the problem.
I even deleted and recreated the database--same problem exist.
I have a very small scale-down version of this app. Is there any way I can send a "zip" file to you?
Please, I have a deadline on this project. I need some serious help ASAP.
In an effort to help resolve this problem, here is code from the scaled-down version: Prior to running this code, ReportPath = App.Path and ReportName = "Report1.rpt"
This code is from my CRVIEWER form:
Private Sub Form_Activate()
Set craxreport = craxapp.OpenReport(ReportPath & "\" & ReportName)
    If ReportName = "Report1.rpt" Then
    End If
DoReport:
    DoEvents
' ==============================================================================
    Screen.MousePointer = vbHourglass
    crviewer1.Refresh
    crviewer1.Zoom "100"
    While crviewer1.IsBusy
        DoEvents
    Wend
    crviewer1.ReportSource = craxreport
    crviewer1.Refresh
    crviewer1.ViewReport
    crviewer1.Refresh
    Set craxreport = Nothing
    Screen.MousePointer = vbDefault
End Sub
Private Sub Form_Load()
Set craxapp = CreateObject("Crystalruntime.application.11")
End Sub
Private Sub Form_Resize()
Me.Height = Screen.Height
Me.Width = Screen.Width
Me.Top = 0
Me.Left = 0
crviewer1.Top = 0
crviewer1.Height = Me.ScaleHeight
crviewer1.Width = Me.ScaleWidth
frmCRPrint.Refresh
End Sub
This code is the "Connection" string:
Public ReportPath As String
Public craxapp As New CRAXDRT.Application
Public craxreport As CRAXDRT.Report
Public CRXDatabaseField As CRAXDRT.DatabaseFieldDefinition
Public ReportName As String
Public pconSports As ADODB.Connection
Public Sub OpenConnections()
Set pconSports = New ADODB.Connection
        pconSports.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & App.Path & "\Sports.mdb" & ";Persist Security Info=False"
        ReportPath = App.Path
    pconSports.Mode = adModeReadWrite
    pconSports.Open

OK, a few details to go over.
You do not need all of the below references:
Crystal ActiveX Report Viewer Library 11.0
Crystal Reports ActiveX Designer Design and Runtime Library 11.0
Crystal Reports ActiveX Designer Library 11.0
Crystal Reports ActiveX Designer Run Time Library 11.0
As long as you are not using report creation APIs, you only need
Crystal ActiveX Report Viewer Library 11.0
Crystal Reports ActiveX Designer Run Time Library 11.0
Which means you'd be using the craxdrt.dll (Dim myApp as New Craxdrt.Application), and the MSM files you need would be; crystalreports11_RDC_Runtime.msm, crystalreports11_RDC_license.msm (you need to add the keycode to this) and crystalreports11_RDC_reportEngine.msm.
If you are using report creation APIs, you do not need Crystal Reports ActiveX Designer Run Time Library 11.0.
Re. creation of deployment package:
I reloaded CR XI on my Development System Build 11.0.0.895
I installed CR XI on my other PC(Test) Build 11.0.0.895
During the creation of the Install Package using MS Package and Deployment System
I do not believe the MS Package and Deployment Wizard that came with VB 6 can handle MSM files(?). To use MS files, you have to use something like MS Visual Installer, InstallShield, Wise, etc.
Ludek
Edited by: Ludek Uher on Oct 23, 2008 6:30 AM

Xcelsius - Database logon failed. (LO 26603)

Hi Expert,
I have a error when run .swf file.
The first, I create new query from SAP toolbar integration in Crystal Report 2008. The Crystal Query is called from a BW Query . The query have not variables, the data get directly from BW Query.
I saved Crystal Report file into BOE (File -->Save -->Enterprise, not save on BW).
In Infoview, I setup schedule for this .rpt file with information database logon below (default as inform in Set Database Location of Crystal Report):
- Database server: xxx.xxx.xxx.xxx (BW server)
- User name: User in BW
- Password: Password in BW
In Xcelsius, I use Live Office to get data from crystal on BOE to Excel sheet on Xcelsius.
In data-->Connection, I changed <server:8080> by <IP BOE System:8080>.
When I preview or export to swf file, a message box appear require input user name and password of BW server (Database logon). After I input correct password, a message box User Identification appear, I input System, User name, Password on BOE server and chose Authentication Enterprise. And final, I get error message " Database logon failed. (LO 26603)".
I try opening Crystal Report file on Infoview and Refresh data, I also input database logon by BW User, the data refresh correctly.
Why do crystal report file update data from BW correct, while .swf file is not and return error Database Logon failed.
Please explain for me what step I missed to get data through Live Office.
Thanks

Hi Priya,
Thanks for your support.
I have set the default credentials in database configuration.
But my dashboard still can't work. When I preview dashboard, A prompt for database logon information appear, I can logon sucess and refresh data. But after I logon username and password on BOE for BOE User Identification with Authentication Enterprise, I still get error " Database logon failed".
Who can explain for me what steps I miss.
Thanks

LO 26603 (missing parameter and db logon failed)

Hi Experts,
I am getting a known error discussed on the forum many times,this is my first stint with CR_LO-Xcelsius,getting stuck at the Error LO 26603.
The dashboard is having a tab sets (3 CR in each tab) and out of three, I am getting u201CParameter Value Missing for oneu201D and u201CDatabase Login Failed for two tabsu201D.
I have already referred the following threads but none of them is answered..
error LO 26603 crystal reports - live office - xcelsius
Error Code: LO 26603
Xcelsius missing parameter values (LO 26603)
Database logon failed (LO 26603)
The Task:
Get CR into the embedded excel using Live Office. To show charts.
The Problem:
Once i preview the Dashboard, data is displayed for the default date.
The CR Server login is popped upon refresh request (triggers from the dashboard) and providing the correct info (Admin user name and pwd) also the error is thrown Lo 26603.
The parameters (3 in no.) are common for all the three reports: (All setting done from Prompt settings)
1.     Date u2013 Data in the charts refreshes when the date is changed (I/P from Calendar in Xcelsius). Cell Binding (Option from Choose Excel Data Range)
2.     Region u2013 Selected (All) from prompt setting in LO Excel (Choose Value List).
3.     Products u2013 Selected (All) from prompt setting in LO Excel (Choose Value List).
I have set the DB logon information for processing the report in CMC and not sure of using SSO to bypass the DB logon prompt.
Please help, how I can troubleshoot this problem.
Config.
Crystal Server XI 3.1 SP2
Xcelsius 2008 5.3.3.0
SAP Integration Kit SP2
Live Office XI 3.1 SP2
Rgds
Sam

Go to CMC
Go to your CR
Right-click and select database configuration
Hardcode logon credentials
This should solve your issue.
Regards,
Rohan

Data Services 4.0 logon failed

Hi everybody
after a very difficult but succesfull installation of DS 4.0 server con AIX, I'm trying to connect to a Repository already created, from a DESIGNER 4.0 installed over a Windows PC, and got the following error message:
LOGON FAILED TO THE SPECIFIED SYSTEM
Check system name, port number, user name, password, authentication method, and try again.
Additional information: <Session: SDK failure>
For the DS 4.0 installation, I used a CMS of sap IPS , for which I can connect perfectly, so I believe the System Name is not the problem.
thanks for your help!

Hi Ricardo, Vineeth,
Another think you can check is that the network can resolve your CMC Server name (the one you are using in the login window.)
I do not remember the details now, but if you use a sniffer (like wireshark ) you will see that:
- The client will connect with the CMC server
- the server will answer with a packet with its server name (not IP)
- the client will try to connect with the CMC server with that name.
Make sure you have those hosts and name in the /etc/hosts file
For example what happened to me is that my test Red Hat systems were not registered in my DNS server. I assumed it was just about network-connectivity and tried to login the Designer with the CMC IP Address.
This does not work, the CMC Server name has to be resolvable. Adding that into the hosts file solved it.
Regards
Norbert

Logon Failed

Similar Messages

Maybe you are looking for