Long time connecting to server

Hello, recently installing snow leo & have some network problem.
MacPro 4.1 / 10.6.2
I setup network & everything is work good, internet speed is ok - but when i try to connect to server near me (in my local subnet) it takes really long time before login window comes up. Already tried change network interface order - did not work for me. BTW - when i try reach my local server i use comm + K, then IP address (no DNS) - so I think it cant be DNS problem. Also I disable IP6. It seams problem in my system or just miss-configuration something
ping to this server works fast, traceroute -n - fast too, but without "-n" - takes long time (about 10 sec)
Any suggestion ?

Hello, thanks for answering
there is my simple cfg
macpro has 192.168.19.2/28
stockserver 192.168.19.3/28
I added to /etc/hosts the following
192.168.19.2 lacalhost
192.168.19.3 stockserver
when I did it - everything works fine & fast, but I can not add every computer to hosts, course some times I bring some new & it takes IP from DHCP, I think it is clear.
And about your last question -
It takes about 25 sec from i hit enter until it takes back to the shell prompt.
but when it done it display that traceroute done for less 1 sec!
Because traceroute is diagnostic tool, usually people don't use it to really work, the same delay happen when I try to connect to file share. It does not matter afp / smb / nfs / even ftp.
When first time I looked this I was try trace route for diagnostic porpoise - it delayed too.
So - now it is clear that it is dns/netbios/dejavue problem - but how I can fix it?!
I have not any Idea.
Some Addition - I thougt when I try reach anything by IP it makes reverse lookup
Because I use ISP DNS there are not records to my local subnet
lacalhost:~ alexpronin$ nslookup 192.168.19.3
Server: 77.50.0.3
Address: 77.50.0.3#53
** server can't find 3.19.168.192.in-addr.arpa: REFUSED
lacalhost:~ alexpronin$
but answer become imidetely !
it seems system try get answer some other way
PS
sorry my poor english, it is not my native language

Similar Messages

Analyze a Query which takes longer time in Production server with ST03 only

Hi,
I want to Analyze a Query which takes longer time in Production server with ST03 t-code only.
Please provide me with detail steps as to perform the same with ST03
ST03 - Expert mode- then I need to know the steps after this. I have checked many threads. So please don't send me the links.
Write steps in detail please.
<REMOVED BY MODERATOR>
Regards,
Sameer
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 12:14 PM

Then please close the thread.
Greetings,
Blag.

Pull large amounts of data using odata, client API and so takes a long time in project server 2013

We are trying to pull large amounts of data in project server 2013 using both client API and odata calls, but it seem to take a long time. How is this done
In project server 2010 we did this creating SQL views in both the reporting database and for list creating a view in the content database. Our IT dept is saying we can't do this anymore. How does a view in Project database or content database create issues?
As long as we don't add a field in the table. So how's one to do this with creating a view?

Hello,
If you are using Project Server 2013 on premise I would recommend using T-SQL against the dbo. schema in the Project Web Database for your reports, this will be far quicker that the APIs. You can create custom objects in the dbo. schema, see the link below:
https://msdn.microsoft.com/en-us/library/office/ee767687.aspx#pj15_Architecture_DAL
It is not supported to query the SharePoint content database directly with T-SQL or add any custom objects to the content database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Error in ODBC after long time connection (MS.SQL Server 2000)

i' using windows XP
and create MS.SQL Server connection through SYSTEM DSN of ODBC DATA SOURCE ADMINISTRATOR in WinXP Control Panel
using jdbc.odbc connection to make connection to database.
it's working, but after many request of data transaction with database.
my program closed it self.
an a error file appear in the path of program.
i don't remember all what the error file contain exactly - it's about ODBC connection ( i already remove the error file long day a go, if i got it again i will post it here)
is java cannot connect database with ODBC properly?
thanks.

this is the error:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7c901010, pid=2528, tid=3508
# Java VM: Java HotSpot(TM) Client VM (1.4.2_15-b02 mixed mode)
# Problematic frame:
# C [ntdll.dll+0x1010]
--------------- T H R E A D ---------------
Current thread (0x02e64358): JavaThread "ServerBeritaThread" [_thread_in_native, id=3508]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000018
Registers:
EAX=0x00000004, EBX=0x0355f9b4, ECX=0x7ffaf000, EDX=0x00000004
ESP=0x0355f950, EBP=0x0355f968, ESI=0x00000000, EDI=0x039414e8
EIP=0x7c901010, EFLAGS=0x00010297
Top of Stack: (sp=0x0355f950)
0x0355f950: 74355a16 00000004 0394150c 7432139f
0x0355f960: 0394150c 00000000 0355f980 7432a244
0x0355f970: 0394150c 74350000 02e643f4 02e64358
0x0355f980: 0355f994 7432a653 02fbde98 02e643f4
0x0355f990: 143aff08 0355f9ac 03711157 039414e8
0x0355f9a0: 0355f9b4 02e64358 143aff50 0355f9e4
0x0355f9b0: 00a881a6 00000000 0355fa00 039414e8
0x0355f9c0: 00000000 0355f9f4 0355f9c8 00000000
Instructions: (pc=0x7c901010)
0x7c901000: 90 90 90 90 90 64 8b 0d 18 00 00 00 8b 54 24 04
0x7c901010: 83 7a 14 00 75 4f f0 ff 42 04 75 19 8b 41 24 89
Stack: [0x03520000,0x03560000), sp=0x0355f950, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [ntdll.dll+0x1010]
C [ODBC32.dll+0xa244]
C [ODBC32.dll+0xa653]
C [JdbcOdbc.dll+0x1157]
j sun.jdbc.odbc.JdbcOdbc.allocConnect(J[B)J+0
j sun.jdbc.odbc.JdbcOdbc.SQLAllocConnect(J)J+30
j sun.jdbc.odbc.JdbcOdbcDriver.allocConnection(J)J+6
j sun.jdbc.odbc.JdbcOdbcConnection.initialize(Ljava/lang/String;Ljava/util/Properties;I)V+37
j sun.jdbc.odbc.JdbcOdbcDriver.connect(Ljava/lang/String;Ljava/util/Properties;)Ljava/sql/Connection;+129
j java.sql.DriverManager.getConnection(Ljava/lang/String;Ljava/util/Properties;Ljava/lang/ClassLoader;)Ljava/sql/Connection;+154
j java.sql.DriverManager.getConnection(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Ljava/sql/Connection;+41
j Prosesor.processInput(Ljava/lang/String;)Ljava/lang/String;+51
j ServerBeritaThread.run()V+35
v ~StubRoutines::call_stub
V [jvm.dll+0x752e6]
V [jvm.dll+0xaf627]
V [jvm.dll+0x751f3]
V [jvm.dll+0x74eef]
V [jvm.dll+0x74f28]
V [jvm.dll+0x8ce4f]
V [jvm.dll+0xd3b07]
V [jvm.dll+0xd3ad5]
C [MSVCRT.dll+0x2a3b0]
C [kernel32.dll+0xb50b]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.jdbc.odbc.JdbcOdbc.allocConnect(J[B)J+0
j sun.jdbc.odbc.JdbcOdbc.SQLAllocConnect(J)J+30
j sun.jdbc.odbc.JdbcOdbcDriver.allocConnection(J)J+6
j sun.jdbc.odbc.JdbcOdbcConnection.initialize(Ljava/lang/String;Ljava/util/Properties;I)V+37
j sun.jdbc.odbc.JdbcOdbcDriver.connect(Ljava/lang/String;Ljava/util/Properties;)Ljava/sql/Connection;+129
j java.sql.DriverManager.getConnection(Ljava/lang/String;Ljava/util/Properties;Ljava/lang/ClassLoader;)Ljava/sql/Connection;+154
j java.sql.DriverManager.getConnection(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Ljava/sql/Connection;+41
j Prosesor.processInput(Ljava/lang/String;)Ljava/lang/String;+51
j ServerBeritaThread.run()V+35
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x02e64358 JavaThread "ServerBeritaThread" [_thread_in_native, id=3508]
0x02facf38 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1048]
0x02fadc20 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=2028]
0x02e61db0 JavaThread "AWT-Windows" daemon [_thread_in_native, id=728]
0x02e20e48 JavaThread "AWT-Shutdown" [_thread_blocked, id=4056]
0x009d03c0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1568]
0x009cf630 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1572]
0x009ccba0 JavaThread "Finalizer" daemon [_thread_blocked, id=2580]
0x009cb818 JavaThread "Reference Handler" daemon [_thread_blocked, id=980]
0x00035aa8 JavaThread "main" [_thread_in_native, id=1684]
Other Threads:
0x00a0b6c0 VMThread [id=1256]
0x00a0cab8 WatcherThread [id=2276]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 43K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 1% used [0x10010000, 0x10012448, 0x10090000)
from space 64K, 53% used [0x10090000, 0x10098930, 0x100a0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 1408K, used 665K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 47% used [0x104f0000, 0x105967e8, 0x10596800, 0x10650000)
compacting perm gen total 4096K, used 4065K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 99% used [0x14010000, 0x14408580, 0x14408600, 0x14410000)
Dynamic libraries:
0x00400000 - 0x0040b000      C:\java\bin\java.exe
0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f4000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000      C:\WINDOWS\system32\RPCRT4.dll
0x77c10000 - 0x77c68000      C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08144000      C:\java\jre\bin\client\jvm.dll
0x77d40000 - 0x77dd0000      C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f56000      C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000      C:\java\jre\bin\hpi.dll
0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
0x00390000 - 0x0039e000      C:\java\jre\bin\verify.dll
0x003b0000 - 0x003c9000      C:\java\jre\bin\java.dll
0x003d0000 - 0x003de000      C:\java\jre\bin\zip.dll
0x02e70000 - 0x02f84000      C:\java\jre\bin\awt.dll
0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
0x774e0000 - 0x7761c000      C:\WINDOWS\system32\ole32.dll
0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
0x033e0000 - 0x03432000      C:\java\jre\bin\fontmanager.dll
0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
0x73940000 - 0x73a10000      C:\WINDOWS\system32\D3DIM700.DLL
0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
0x035e0000 - 0x035ef000      C:\java\jre\bin\net.dll
0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
0x605d0000 - 0x605d9000      C:\WINDOWS\system32\mslbui.dll
0x77120000 - 0x771ac000      C:\WINDOWS\system32\OLEAUT32.DLL
0x20b00000 - 0x20b4b000      C:\WINDOWS\system32\imon.dll
0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
0x71a50000 - 0x71a8f000      C:\WINDOWS\system32\mswsock.dll
0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
0x03710000 - 0x0371c000      C:\java\jre\bin\JdbcOdbc.dll
0x74320000 - 0x7435d000      C:\WINDOWS\system32\ODBC32.dll
0x5d090000 - 0x5d127000      C:\WINDOWS\system32\COMCTL32.dll
0x7c9c0000 - 0x7d1d4000      C:\WINDOWS\system32\SHELL32.dll
0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
0x763b0000 - 0x763f9000      C:\WINDOWS\system32\comdlg32.dll
0x773d0000 - 0x774d2000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
0x20000000 - 0x20017000      C:\WINDOWS\system32\odbcint.dll
0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
0x5fe80000 - 0x5fe9b000      C:\WINDOWS\system32\odbccp32.dll
0x77c70000 - 0x77c93000      C:\WINDOWS\system32\msv1_0.dll
0x76d60000 - 0x76d79000      C:\WINDOWS\system32\iphlpapi.dll
VM Arguments:
java_command: ServerBerita
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=.;C:\PROGRA~1\JMF\lib\sound.jar;C:\PROGRA~1\JMF\lib\jmf.jar;C:\PROGRA~1\JMF\lib;.;.;d:\PROGRA~1\JMF21~1.1E\lib\sound.jar;d:\PROGRA~1\JMF21~1.1E\lib\jmf.jar;d:\PROGRA~1\JMF21~1.1E\lib;
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;c:\java\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft Visual Studio\Common\Tools\WinNT;C:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;C:\Program Files\Microsoft Visual Studio\Common\Tools;C:\Program Files\Microsoft Visual Studio\VC98\bin;c:\apache\mysql\bin;;C:\PROGRA~1\COMMON~1\MUVEET~1\030625
USERNAME=acer
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 2 family 6, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 1038440k(478648k free), swap 1712796k(1228644k free)
vm_info: Java HotSpot(TM) Client VM (1.4.2_15-b02) for windows-x86, built on May 22 2007 17:01:47 by "java_re" with MS VC++ 6.0

Long time connecting to the USB modem

Hello.
I have nokia 6220 classic and I'm using it as a 3G modem. Everything works fine, but when I'm connecting it it takes about 60 (!) seconds to detect modem by NetworkManager and be able to estabilish connection. A little bit of research showed that the main problem is that two times during modem recognition procedure serial port is being closed, which takes 30 seconds each:
Apr 28 17:35:07 nucleon kernel: [ 1266.639944] usb 2-1: new high-speed USB device number 8 using ehci_hcd
Apr 28 17:35:08 nucleon kernel: [ 1266.765731] cdc_acm 2-1:1.0: ttyACM0: USB ACM device
Apr 28 17:35:08 nucleon kernel: [ 1266.770234] usb 2-1: bad CDC descriptors
Apr 28 17:35:08 nucleon kernel: [ 1266.770366] cdc_acm 2-1:1.2: ttyACM1: USB ACM device
Apr 28 17:35:08 nucleon mtp-probe: checking bus 2, device 8: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1"
Apr 28 17:35:08 nucleon mtp-probe: bus: 2, device: 8 was not an MTP device
Apr 28 17:35:08 nucleon modem-manager[4122]: <info> (ttyACM0) opening serial port...
Apr 28 17:35:08 nucleon modem-manager[4122]: <info> (ttyACM1) opening serial port...
Apr 28 17:35:09 nucleon modem-manager[4122]: <info> (ttyACM0) closing serial port...
Apr 28 17:35:09 nucleon modem-manager[4122]: <info> (ttyACM0) serial port closed
Apr 28 17:35:09 nucleon modem-manager[4122]: <info> (ttyACM0) opening serial port...
Apr 28 17:35:09 nucleon modem-manager[4122]: <info> (Nokia): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1 claimed port ttyACM0
Apr 28 17:35:09 nucleon modem-manager[4122]: <info> (ttyACM0) closing serial port...
Apr 28 17:35:09 nucleon modem-manager[4122]: <info> (ttyACM0) serial port closed
Apr 28 17:35:43 nucleon modem-manager[4122]: <info> (ttyACM1) closing serial port...
Apr 28 17:36:13 nucleon modem-manager[4122]: <info> (ttyACM1) serial port closed
Apr 28 17:36:13 nucleon NetworkManager[4791]: <warn> (ttyACM0): failed to look up interface index
Apr 28 17:36:13 nucleon NetworkManager[4791]: <info> (ttyACM0): new GSM/UMTS device (driver: 'cdc_acm' ifindex: 0)
Apr 28 17:36:13 nucleon NetworkManager[4791]: <info> (ttyACM0): exported as /org/freedesktop/NetworkManager/Devices/3
Apr 28 17:36:13 nucleon NetworkManager[4791]: <info> (ttyACM0): now managed
Apr 28 17:36:13 nucleon NetworkManager[4791]: <info> (ttyACM0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Apr 28 17:36:13 nucleon NetworkManager[4791]: <info> (ttyACM0): deactivating device (reason 'managed') [2]
Apr 28 17:36:13 nucleon NetworkManager[4791]: <info> (ttyACM0): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
I've found also this:
http://permalink.gmane.org/gmane.linux.kernel/1056812
How can I improve speed of modem detection?

Hello, thanks for answering
there is my simple cfg
macpro has 192.168.19.2/28
stockserver 192.168.19.3/28
I added to /etc/hosts the following
192.168.19.2 lacalhost
192.168.19.3 stockserver
when I did it - everything works fine & fast, but I can not add every computer to hosts, course some times I bring some new & it takes IP from DHCP, I think it is clear.
And about your last question -
It takes about 25 sec from i hit enter until it takes back to the shell prompt.
but when it done it display that traceroute done for less 1 sec!
Because traceroute is diagnostic tool, usually people don't use it to really work, the same delay happen when I try to connect to file share. It does not matter afp / smb / nfs / even ftp.
When first time I looked this I was try trace route for diagnostic porpoise - it delayed too.
So - now it is clear that it is dns/netbios/dejavue problem - but how I can fix it?!
I have not any Idea.
Some Addition - I thougt when I try reach anything by IP it makes reverse lookup
Because I use ISP DNS there are not records to my local subnet
lacalhost:~ alexpronin$ nslookup 192.168.19.3
Server: 77.50.0.3
Address: 77.50.0.3#53
** server can't find 3.19.168.192.in-addr.arpa: REFUSED
lacalhost:~ alexpronin$
but answer become imidetely !
it seems system try get answer some other way
PS
sorry my poor english, it is not my native language

No Longer Can Connect to Server on Apple TV?

Hi Everyone,
Where to begin. My Apple TV stopped working approximately three weeks ago. I remember it well. I had just purchased an album on iTunes using my Apple TV and the screen blinked about six times. Then, it turned off. I'm honestly not sure what happend right after that. Now, when I turn it on from sleep mode, I get a screen with just two icons showing after hitting the back button: Computers and Settings.
I've tried unplugging power cords and connecting cables (for both Apple TV and television). I've also already read some of the discussions here and tried Reset, Restore, and Restart. No good.
I've also noticed, at the same time, that I could not download the album I bought on iTunes using my Macbook. iTunes would ask me multiple times to sign in, yet it would not let me download the purchase. I even tried to do this on my iMac at my parents' house. No good. I was told I had to authorize the computer when it was already authorized and the only option was to deauthorize it. Even that didn't work.
This is also the exact same time where I stopped using Verizon as my Internet provider and started using the Xfinity hotspot. In the Settings tab, I have the Xfinity hotspot chosen and it's showing full strength. The hotspot works for my Macbook and iPhone perfectly, full bars.
The only progress I've made, about two days ago, was that iTunes finally let me download the album I purchased onto my Macbook. I'm not sure how or why.
I really need help. SOS.

You have a network issue. ATV can not connect to the internet. The fact that you also could not download to your Macbook until recently means more than just the ATV was effected. The fact that NONE of the icons are there means that there is no internet access at all. Meaning that iTunes, Netflix, Hulu, etc. are all not able to connect. The service strength indicator is just showing the WiFi single strength. It is not an indication of actual internet access.
You mentioned you used to use Verizon. Was this cellular internet service? You might try contacting this new service provider and asking if they limit or throtal some online services like Netflix or iTunes. Some service providers do. Since the problem started with this new service provider you might contact them and ask them to look into the problem.

Ipod dissapearing from itunes after long time connected?

I am not sure on the time it takes.. or if there is a set time... but my ipod dissappears from my Itunes list (i have to unplug/replug to get it to resynch)
Its still seen in windows as connected via USB.
Its the latest 7.0.70 itunes and 1.2 for my 5th gen gen 1 ipod

Just a quick update. (and possible quick fix) I checked "enable disk use" on both of my ipods. I then enjected my nano and hooked it back up and my 5.5G iPod did remain on the source list as did the Nano. I suspect if I did the same thing but only ejecting the 5.5G iPod that the Nano would also remain connected. I just did this, so I don't know if this quick fix will help keep your iPod connected to the source list or not. I'll post back later if one of my iPods drops off the source list again. I have a sneaky suspician disk use won't allow the iPod to drop off the source list.

Long time setting up Server after Restore

Used Time Machine to restore my computer to the boot drive and all seemed to go well except for
the Server. When starting it, it starts to update which says it should take a few mins, but its been stuck
on checking DNS configuration since last night.
Any ideas?
Lobo59

I didnt get the exact problem. Time Machine should not take this time to restore. Try to do things again hope it will work else try deep freeze server restore software for the same.

Take long time to change server and log on

Hi,
I am useing vb.net and crystal report 8.5 for rpt
i am trying to load report in vb.net windows i useing SQL server 2005 exp. my code heare i is wroking but still its take 1 to 2 mintus to log on i any idia please help me
Dim myconnectioninfo As ConnectionInfo = New ConnectionInfo
Dim cs_os as new billout.rpt
crystalreportview.ReportSource = CS_OS
CS_OS.DataSourceConnections(0).SetConnection(server01, database, userxx, passxx)
Thanks

Please have a look at the Rules of Engagement before posting to these forums. The link is here:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement
Once you have read the above, please provide the neccessary information.
BTW., since you are using .NET and CR for .NET code, you are not using CR 8.5. It may be that the reports were created in CR 8.5, but CR 8.5 SDK did not have the .NET SDK.
Ludek

Lost long time connection to HP photosmart 2600

I have been using an HP Photosmart 2600 all in one with my airport for 3 years with out a problem. Since the last security update and update of my airport software I have not been able to reestablish a connection between printer and airport. I have the latest software. Have tried every trick and tip on this site. HP wanted 65 dollars to chat with me and suggested I buy a new HP printer. The thing is, this set up has worked fine for years. Any ideas. My printer in not listed as one on the HP printer options but it used to be there under other. I cannot figure how to get it back. Printing via usb is fine and airport is fine. I have been patient and worked on this for 2 weeks before posting. Any thoughts?

I could not add my hp laserjet 2600dtn because the default automatic set up could not find the configuration. It would just spin trying to add the printer, but not ever actually do anything. I hit on the manual set up and then selected any additional features for my printer. Then hit the add printer. Other suggestions, since I do not know what you have already tried are; 1. select a generic IP configuration? 2. go to cups.org find the driver for your printer and add it to your list of printer drivers. Then repeat the system preference printer set up. I was able to add an old scanner using this method. Hope this helps, as it is frustrating to have a perfectly good printer not work with your set up. I have found over the years that HP does not always play nice whether it is Microsoft or Apple. My next printer will most likely be another brand.

Upgrade R/3 4.7 to EHP 5 - Long time pause at Step 6.Downtime - TABIM_POST!

At the step 6 . Downtime on TABIM_POST (import of additional requests) phase upgrade processed very long time now! Server time: 24/02/2012 10:30
Status is: "Phase MAIN_NEWBAS/TABIM_POST is running..."
Last log's files stoppped yestoday at time : 23/02/2012 20:25!
Edited by: Baurzhan Lekerov on Feb 24, 2012 6:16 AM

I'm create message to SAP that we 're don 't 've 2 methods at this step during Upgrade process:
- GET_COMPS_FOR_ENH
- GET_COMPS_FOR_SPOT
for class CL_WB_ENH_UTILITIES.
Can we're copy source code from another ECC 6.0 system to our upgrade system manually?
So, our upgrade R3 system - is a homogeneous copy from source R3 4.7 system.
This test-trial upgrade system is not present in the system landscape with SolMan and now we're have a problem with Change request management - When I'm try activate corrections from note 1369430, next message occured:
"You cannot assign any requests to project SID_P00001.
Diagnosis
You want to create a request in project SID_P00001, or assign an existing request to this project. However, you are not currently allowed to use this function for this project."
How we can reset this requirement from ChaRM?
Edited by: Baurzhan Lekerov on Feb 25, 2012 7:54 AM

Connecting to the database taking long time to connect database server

Hi
When I execute procedure i am getting the below message at bottom of the Oracle SQL Developer
"Connecting to the database"
it is taking more than 10 min plz guide

Hi
have you installed a normal Oracle Client also on your Host? normal Oracle Client
Did you connect with host:port:sid or with a Oracle Naming Service? through TNS Service
Can you test tnsping <alias> yes, It is working fine
Did other user have the same problem? yes
Did you connect through WAN or LAN connection? LAN (Intranet)
Can you tell more about you client/database setup?
Database setup:
OS: Window 2008 server
version: 11.1.0
Client: 11.1.0
OS: Window 2008 server
Now I am not able to execute single select query which table contains 6 records and 15 columns it is taking long time I have waited 30 min still no resutls
only one table is behaving like this remaining is working fine
Edited by: user9235224 on Oct 6, 2012 7:06 PM

[Solved] MPD clients connect to server too long first time

When my system start mpd clients cannot connect to server a long(10-15 seconds or more) for some reason.
Same time internet connection and network seems to be ok.
So, It's look like I run mpc for example and it get stuck. This problem is new. 2-4 weeks or less.
I've tried use user and global config without any success.
Mpd config now look like this:
music_directory "/home/neg/music"
playlist_directory "/home/neg/.mpd/playlists"
db_file "/home/neg/.mpd/mpd.db"
log_file "/home/neg/.mpd/mpd.log"
pid_file "/home/neg/.mpd/mpd.pid"
state_file "/home/neg/.mpd/mpdstate"
sticker_file "/home/neg/.mpd/sticker.sql"
user "neg"
bind_to_address "localhost"
port "6600"
input {
plugin "curl"
save_absolute_paths_in_playlists "yes"
metadata_to_use "artist,album,title,track,name,genre,date"
follow_inside_symlinks "yes"
connection_timeout "2"
filesystem_charset "UTF-8"
input {
plugin "curl"
audio_output {
type "pulse"
name "Local Music Player Daemon"
mixer_type "hardware"
server "127.0.0.1"
My netctl profile looks like this:
Description='A basic dhcp ethernet connection'
Interface=enp6s0
Connection=ethernet
SkipNoCarrier=yes
IP=static
DNS=('192.168.1.1')
Address=('192.168.1.35/24')
Gateway='192.168.1.1'
## for DHCPv6
#IP6=dhcp
## for IPv6 autoconfiguration
#IP6=stateless
System start looks almost normal. USB reinit after uefi takes a lot of time sometimes, but it's not critical.
[~] >> PAGER= systemd-analyze blame
7.483s systemd-udev-settle.service
543ms zfs-mount.service
443ms systemd-modules-load.service
121ms [email protected]
100ms [email protected]
83ms [email protected]
68ms systemd-logind.service
68ms lm_sensors.service
59ms alsa-restore.service
57ms zfs-share.service
38ms systemd-vconsole-setup.service
25ms polkit.service
24ms [email protected]
18ms ntpd.service
14ms systemd-udev-trigger.service
14ms avahi-daemon.service
13ms systemd-binfmt.service
13ms mnt-home.mount
12ms systemd-tmpfiles-setup-dev.service
12ms dev-hugepages.mount
10ms dev-mqueue.mount
10ms systemd-remount-fs.service
10ms sys-kernel-debug.mount
9ms proc-sys-fs-binfmt_misc.mount
8ms systemd-tmpfiles-setup.service
6ms systemd-update-utmp.service
5ms systemd-journal-flush.service
5ms boot-efi.mount
5ms systemd-random-seed.service
4ms kmod-static-nodes.service
4ms systemd-udevd.service
3ms var-cache-davfs2.mount
3ms var-cache-pkgfile.mount
3ms udisks.service
3ms var-cache-pacman.mount
2ms rtkit-daemon.service
1ms var-tmp.mount
1ms systemd-sysctl.service
1ms zfs-import-cache.service
1ms systemd-user-sessions.service
937us sys-kernel-config.mount
911us tmp.mount
Whole system config
[~] >> inxi -FC
System: Host: unreal Kernel: 3.18.2-2-ARCH x86_64 (64 bit) Desktop: N/A Distro: Arch Linux
Machine: System: ASUS product: All Series
Mobo: ASUSTeK model: SABERTOOTH Z97 MARK 1 version: Rev 1.xx
Bios: American Megatrends version: 0901 date: 05/08/2014
CPU: Quad core Intel Core i7-4790K CPU (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
Clock Speeds: 1: 4000.00 MHz 2: 4000.312 MHz 3: 4000.625 MHz 4: 4000.00 MHz 5: 4005.156 MHz 6: 4000.156 MHz 7: 4000.781 MHz 8: 4001.718 MHz
Graphics: Card: NVIDIA GM204 [GeForce GTX 980] X.Org: 1.16.3 driver: nvidia Resolution: [email protected]
GLX Renderer: GeForce GTX 980/PCIe/SSE2 GLX Version: 4.4.0 NVIDIA 343.36
Audio: Card-1: NVIDIA GM204 High Definition Audio Controller Sound: ALSA ver: k3.18.2-2-ARCH
Card-3: Creative driver: USB Audio
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: 10:c3:7b:96:22:ef
Card-2: Intel Ethernet Connection (2) I218-V driver: e1000e
IF: eno1 state: down mac: 40:16:7e:e9:08:e1
Drives: HDD Total Size: 2378.5GB (20.0% used) 1: id: /dev/sda model: WDC_WD1003FZEX size: 1000.2GB
2: id: /dev/sdb model: PLEXTOR_PX size: 128.0GB 3: id: /dev/sdc model: ST3250312AS size: 250.1GB
4: id: /dev/sdd model: WDC_WD1003FZEX size: 1000.2GB
Partition: ID: / size: 89G used: 29G (35%) fs: ext4
Sensors: System Temperatures: cpu: 32.0C mobo: 34.0C gpu: 40C
Fan Speeds (in rpm): cpu: N/A fan-1: 0 fan-2: 0 fan-3: 0 fan-4: 0 fan-5: 0 fan-6: 0
Info: Processes: 424 Uptime: 2 min Memory: 2166.0/15993.2MB Client: Shell (zsh) inxi: 1.9.14
I've tried ::1 addr, sockets etc, nothing gets better.
Also I've tried to upgrade mpd to git or downgrade.
Last edited by Neg (2015-01-28 11:36:46)

Rasi wrote:have you checked, if pulseaudio was running at that time already?
Yes, pulseaudio seems to be ok at that moment.
Also I have such thing in the log ~2 minutes
Jan 19 09:17 : client: [142] opened from 127.0.0.1:38434
Jan 19 09:17 : client: [142] closed
Jan 19 09:17 : client: [143] opened from 127.0.0.1:38435
Jan 19 09:17 : client: [143] closed
Jan 19 09:17 : client: [144] opened from 127.0.0.1:38436
Jan 19 09:17 : client: [144] closed
Jan 19 09:17 : client: [145] opened from 127.0.0.1:38437
Jan 19 09:17 : client: [145] closed
Jan 19 09:17 : client: [146] opened from 127.0.0.1:38438
Jan 19 09:17 : client: [146] closed
Jan 19 09:17 : client: [147] opened from 127.0.0.1:38439
Jan 19 09:17 : client: [147] closed
When daemon seems to be ok
[~] >> systemctl --user status mpd2
● mpd2.service - Music Player Daemon
Loaded: loaded (/home/neg/.config/systemd/user/mpd2.service; disabled)
Active: active (running) since Mon 2015-01-19 09:15:59 MSK; 1min 59s ago
Main PID: 1947 (mpd)
CGroup: /user.slice/user-1000.slice/[email protected]/mpd2.service
└─1947 /usr/bin/mpd --no-daemon /home/neg/.mpd.conf
Jan 19 09:15:59 unreal systemd[953]: Started Music Player Daemon.
Also I've tried to set port manually in ncmpcpp, then log messages are NOT gone.
I've already tried alsa-only config. Same issue.
When daemon is "running" clients of it are not response ~1-2 minute.
Last edited by Neg (2015-01-19 06:26:15)

Long time for a Mail Client to verify connection to server normal?

Server: Tiger (G4)
Client: Leopard Mail.app (G5 iMac)
Local network.
When adding an imap account it takes a long time to verify the inbound and outbound (same server) connection. I don't have actual time but it seems like a long time and is much longer than it takes to get a cup of java.
Does it do a lot of checking or do I have a mail server problem is what my concern is.
It (mail app) always carries on, I.e. is happy to use the server eventually.

H,
my first guess would be at DNS. Are you using internal DNS? If so is it the first on the list at the client (system prefs---network).
There are several different schools of thought on this (network geeks can have serious religious disagreements about this, just add beer and we'll argue it for days) but where possible, run internal DNS on the mailserver that, at least, knows about itself and point your clients at it. DNS is virtually no load on the server (even with a LOT of clients hitting it, its pretty lightweight) and can speed up a number of things. Just remember to point the server at itself as its first DNS as well by using 127.0.0.1 and giving it a valid search domain (your domain.com).
My $.02 Hope it Helps
Sean

Retreive External data from SQL making connection to SQL server take a long time

I have an Excel pivottable based on a view from SQL server. The view gets data from 2 databases on the sames server. I have the sames login for both databases and also the same rights (datareader, datawriter and owner). When running the view from within
the SQL Server management tool it goes quick. In Excel once the connection is made everything goes fast. Only making the connection takes a very long time. When I use a view with data from a single database then everything is fine and goes fast.
Example of the situation: I use the example view below in an excel pivot. This gives as result that the connection takes very long.
SQLServer A
View CustomerInfo which contains the following query.
Select * FROM databaseA.dbo.Customers as Customers
CROSS APPLY
SELECT *
FROM databaseB.dbo.Contacts as Contacts
Where Customers.Number = Contacts.CustomerNumber
) AS Contactdata
When I remove the CROSS APPLY part, the connection is made directly
We login to SQL with normal logon (not windows security) The user has the same rights on both databases.
I hope the problem is clear. Does anyone have an idea of how I can solve this problem?

-1* ( prior dataid ) = parentid
is it multiplying -1 times the prior dataid ?that's exactly what it's doing
you need:
prior dataid = ABS(parentid);
not knowing you're data, and therefore assuming that dataid is always positive (since it doesn't have an ABS), and that parentid can be positive or negative, your criteria becomes
parentid = prior dataid (handles both are positive)
or parentid = negative of prior dataid (handles parentid is neg, dataid is pos)
since the "prior" must be right next to the column (dataid), I put parens around the whole thing, and then mult by -1

Long time connecting to server

Similar Messages

Maybe you are looking for