Looking for a better validation, for GT

Hello folks,
I have to make a validation on PT60 Transaction, I have to validate te schedule for the employees, I create a function on pe04 for TM and I have a form in the include RPTMOZ00 where I get the table P2011 where I have the schedule, so what I have to do is check the pairs of the hour like this, I identificate the entry like a P10 out to lunch like P15 entry for lunch P25 and out of the work like P20, so I have to check that the order is correct, it can have another entry(P10) and another exit (P20) it's optional ,I can sort by the hour and I got an order but it can came duplicate or triplicate, etc. I can't use delete adjacent duplicates because it depends if is an entry i delete all the P10 except the first one, and if it is and out of work I delete all the P20 except the last one, and I have to do some validation like this.
Ex.
If came P10-P25-P20 ERROR
If came P10-P15-P20 ERROR
If came P15-P25 ERROR
If came P10-P25 ERROR
If came P10 ERROR
ETC.
The correct order is
P10-P15-P25-P20
OR
P10-P20
OR
P10-P15-P25-P20-P10-P20
I think it could have a simple validation that cover that ranges and another ones, but I accept suggestions..
Because my confusion is each code (P10,P20,etc) came in line of the table not in just one.
Let me know if you have some opinion.
Thanks
Bye.

Yes, agree with SAB, zalman 7000 is a good one, however I´ve got 2 very simular K8N Neo2-systems but with 2 different cpu coolers.
One with zalman 7000alcu and one with Thermalright XP-90 and a zalman 92mm fan ( you can use what ever 80/92mm fan you like high speed, low speed, led colored, etc).
Both are equal regarding cooling to my experience, but I prefered the XP-90 because I did not have to remove the backplate ( I think zalman recommends mounting it´s own backplate to get the right distance/pressure between the cooler and cpu ).
With the XP-90 you just switch the retension mechanism which is easy ( even with the MoBo in the case ).

Similar Messages

Looking for a better Piano for EXS

I have been looking to get a better Piano sound out of logic. I am trying to make this happen without having to buy Ivory or some other plug that is out there. Is this a cheaper one that sounds really great?

I have been looking to get a better Piano sound out
of logic. I am trying to make this happen without
having to buy Ivory or some other plug that is out
there. Is this a cheaper one that sounds really
great?
http://www.sampletekk.com/proddetail.php?prod=STCD-033
And it's on sale!
Listen to my "Eleanor Rigby" demo.

Searching for a better design for function in sql where clause

We are using for a while a parameter management framework based on parameter hierarchy and matrix fully internazionalized. For implementation flexibility we never use primary key to access directly the parameter but used a function that return the corresponding primary key by selecting it in an array in a package with a parameter name or external identification number that never change.
All is working well ... the system is very flexible ... we are as developper very happy because we can offer a centralized management parameter system for the whole application.
Our problem is regarding the lack of sql performance when the packaged function are used in sql ... it seem that they are executed each time for earch row instead of only once and bind to the sql (as a bind variable). This is really a big issue. We solve the problem in PL/SQL by getting the parameter in variable and bind it the sql but it is not possible everythere and we will be interesting to know if somebody had similar problem and how we may solve the problem.
Thanks a lot

    select contractdate.contract_i
                            , contractdate.contractdate
                    from    contractdate
                            ,     (     select     contractdate.contract_i
                              , max( nvl( contractdate.dateto, sysdate) ) dateto
                         from     contractdate
                         where     contractdate.t_contractdate_i = firstexpiry
                         group by contract_i
                    ) contractdatelast
                    where     contractdate.contract_i = contractdatelast.contract_i
                    and     nvl( contractdate.dateto, sysdate ) = nvl( contractdatelast.dateto, sysdate )
                    and     contractdate.t_contractdate_i = t_contractdate_ipar.fgetflextypologyclassitem_i( t_contractdate_ipar.fis1stexpiry )t_contractdate_ipar.fgetflextypologyclassitem_i is the function that return the primary key corresponding to the internal identification number
t_contractdate_ipar.fis1stexpiry is the function that return the internal identification number
An array in a package contains class and items internal identification number with the corresponding primary key used in the whole application (label, description in the user language also). All data for item (parameters) are stored in the flextypologyclassitem table that is referred by all parameters in the application. An application manage this table as a centralized parameter system.

Is Using the COM API for Integration still valid for UCM 11g?

Dear All,
One of our partners is trying to implement integration to UCM by using the COM API (described http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10807/c08_com.htm#i1084682).
However, they cannot follow the manual, because the environment does not correspond to the written text:
-     8.2.1 To set up IdcCommandUX, run the IdcCommandUX setup file, which is stored in extras/IdcCommandUX/setup.exe in the media. – no such directory exists (neither extras, nor IdcCommandUX); ‘extras’ used to be in 10g, though
-     8.2.3 1. Add the IdcCommandUX control to the project . – according to the partner, this is supposed to mean that IdcCommandUX.ocx must exists somewhere – there is no such file to be found
-     8.4 speaks about “IntradocClient OCX component”, 8.5 speaks about “IdcClientOCX Component” – the system has only IdcClient component, which contains only idcclient.jar
Could anyone confirm that COM API is still available in 11g? If so, what steps need to be followed to make it running?
Thanks in advance, Jiri

For what it's worth, I had no problems migrating an authentication plugin from 4 to 5. This is really good, because otherwise I wouldn't be able to use 5.1.

"key not valid for use in specified state" when installing itunes

I recently uninstalled an older version of itunes, and every time i try to install the newest version it wont work.
I just keep getting the message "key not valid for use in specified state". If you know what to do could you
please make it simple. also do not send me to apple's help section, it does not have ANY answers.
thanks.

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
There is a link to 7-zip in the Install missing components section of the user tip Troubleshooting issues with iTunes for Windows updates, but if you have the key not valid error the advice above should work, and there is no need to break down the setup file.
tt2

Key not valid for use in specified state error message

I did the update for my iPhone and also tried to update iTunes. I kept getting an error message of "key not valid for use in specified state" error message. I thought that if I uninstalled iTunes and re-installed it, that it would be fine. I'm still getting the message and now I don't have iTunes. When my phone updated, I couldn't download anything/backup my phone to iTunes. Please help. Thank you in advance.

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For further problems installing iTunes see Troubleshooting issues with iTunes for Windows updates.
tt2

Issue installing ITunes : error key not valid for use in specified state

On the latest update for iTunes for Windows the updated couldn't complete as it gave me the following message " key not valid for use in specified state". I then completly uninstalled iTunes and its components in the order advised, rebooted my system, ran the latest ITunes setup and still get the message " key not valid for use in specified state".
I have checked all the directories to ensure no remnants.
Any one got an answer to this issue as I no longer have access to ITunes. I have a Laptop running Windows Vista Business
Thanks,
Stones of Gold

It seems we may have a more targeted solution. Based on posts in the thread key not valid for use in specified state I've just added the following to the user tip.
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

Consistent Error Message: Key not valid for use in specified state

For several years I have been trying to use iTunes. Without success, I decided to try to reinstall the program and now I am getting the above error message.

It seems we may have a more targeted solution. Based on posts in the thread key not valid for use in specified state I've just added the following to the user tip.
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

When trying to download Itunes this pops up " key not valid for use in specified state" what does this mean and how can I fix it?

When trying to download Itunes this pops up " key not valid for use in specified state" what does this mean and how can I fix it? I am using a pc laptop if that makes any difference.

Try reading through this thread: key not valid for use in specified state. Possible solution involves moving the RSA folder. Rather than deleting it as aniwack suggested I'd try this:
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

Tried updating to 11.4 Itunes and it says "key not valid for use in specified state"

when I tried to update ITunes to 11.4 I get an error message saying " key not valid for use in specified state" I tried uninstalling iTunes and downloading the new version but it still won't download. I also tried syncing my Iphone 6 and it wouldn't let me until I updated to 11.4 which brings me back to my problem???

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For further problems installing iTunes see Troubleshooting issues with iTunes for Windows updates.
tt2

Exits for serial numbers validation

I need to validate the serial number ie i need to check whether the user entered the serial number or not. So i am searching for badi or customer exists.
please tell me the exists that work for serial number validations for this transactions.
MIGO
MB01
MB1C
PGI
MI04
I checked the below exits but of no use..
MB_CF001
MBCF0002
MBCF0005
MBCF0006
MBCF0007
MBCF0009
MBCF0010
MBCF0011
thank you for all the help

How does it accept blank serial no, if the stock is there the serial no must be specified right ?
Serial number inventory is performed for all materials with serial number requirement. For this, you must maintain the following settings:
In the material master record, a serial number profile must be entered containing the serialization procedure MMSL (Maintain goods receipt and goods issue document), with the indicator for Serial number usage configured in such a way that serial numbers must be assigned.
The stock check indicator in the serial number profile should be configured in such a way that an error message is displayed in the event of inconsistencies in inventory management.
Edited by: Keshav.T on Jan 28, 2010 8:57 PM

Every time i try to install itunes on my laptop for windows i get the message''key not valid for use in specified state'' any clue? '

every time i try to install itunes on my laptop for windows i get the message''key not valid for use in specified state'' any clue?

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\<User>\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Looking for a better resource to get a handle on using effects in after effects (CS6 BTW)

Hello thanks for looking in,
I would like to get better control over Zooming. The Zooming I found in AE did not function when
dragged it into my effects controller...Is the only Zoom control really the "Scale" as found in Prem-Pro?
I could not find it in AE. I wanted to zoom over the shoulder of my actor and concentrate on what my Actor is looking at/pointing at. I could not find where that effect is at in AE.
If you know of a couple good tutorials to watch that show how to control the effecst in After-Effects it would be welcomed and appreciated. If you know the specific path to use to pan and
zoom for my desired shot mentioned, that too would be appreciated. One other ? I skimmed through "Creative Cow" but there are many videos and after watching a couple that were titled what
I want, were not what I was looking for. Spent an hour plus surfing before I came here to ask.
Are some of the effects only applicable to one or the other? IE: Movies or stills? If so is there a
manual that states what can be used with what? I tried dragging some of the effects into my effects area and they would not populate. IE: Zoom Forward. Only used for Text?
Thanks for your time with this in advance.

Start here to learn After Effects: http://adobe.ly/bjBT3P
(That link is the direct link to the resources recommended on the thread that shooternz gave.)

Looking for a better solution that tunnel interface

Hi
acctualy I have a Vsat connection between my remote site and central office
on both site we have router and sat modem
I have now a tunnel interface between my two routers,I am looking for a better idea,,

hi...
so you have tunnel interface between your two router so now what are you looking for...?
secure IPsec connection or what???
please explaine in details
regards
Devang

Looking for a better heatsink help....K8N NEO2

Im looking for a better heatsink....any suggestions? I may oc it but for now I wont....it idles at 40-41 and stays at 60 when im gaming 58 if i turn off cool n quiet.....and thats with some ocz ultra5 Thermal compund....ThX

Yes, agree with SAB, zalman 7000 is a good one, however I´ve got 2 very simular K8N Neo2-systems but with 2 different cpu coolers.
One with zalman 7000alcu and one with Thermalright XP-90 and a zalman 92mm fan ( you can use what ever 80/92mm fan you like high speed, low speed, led colored, etc).
Both are equal regarding cooling to my experience, but I prefered the XP-90 because I did not have to remove the backplate ( I think zalman recommends mounting it´s own backplate to get the right distance/pressure between the cooler and cpu ).
With the XP-90 you just switch the retension mechanism which is easy ( even with the MoBo in the case ).

Looking for a better validation, for GT

Similar Messages

Maybe you are looking for