Looking for best way to select a list of components

I have a button that checks user input to make sure it's the right format.
I want this button to extend a debugger type window... I was wondering if there was a class that someone could recommend to me.
Inside the window being extended I want there to be a table with columns labeled "Error Message", "Input", "At", "ReplaceWith". The first three will be disabled text fields, but the fourth one i want to hold a textfield with a button... Any recommendations as to how to most efficiently implement a selectable row of components would be greatly appreciated. Thanks.

i could always just fake a table via a class
extending a JPanel with all the data in it & just
have an array of this class & throw those into a
bigger JPanel... if anyone knows of a better, cleaner
way to do this, please let me know.Possibly better to use JDialog with a JTable rather than JPanel since my guess is that you want to present this information in a modal way (though I could be wrong).

Similar Messages

Looking for best way to filter status or meter data from differently formatted text.

With the product we design we are able to communicate via RS-232 ports. What I'm trying to do is filter out the data that is given by multiple differnt types of products that will give similar data back, but in a differnt format. Such that in a status command I'm looking for everything to be in a non failed state. But some items will show warning, failure, #.##w(for warning), or #.##f (for fail). But the format of each product is different. Also for a meter command I'm looking for a way to filter out just the numeric value for each phase amplitude, but once again the format will be different for each product. I have been able to pull this data out easy enough for an individual product but not on a wide product range with the same VI.

"Service is not available at this time
Try back later"
Bye...
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Looking for best way to set up multiple iPhone accounts

I already have an iPhone. Planning on getting one for my wife. I need to know the best way to setup both phones on my computer. We have separate Windows accounts on our home computer. I currently have an iTunes account on my Windows user account with some apps and the music library - with some, but not a lot of purchased music.
We also both use separate Outlook accounts for Calendar, Contacts, etc.
Should I:
- Sync both phones on my iTunes account? I imagine that would allow us to share any purchased music and apps. If so, can I point her phone to sync to her Outlook account?
- Set up a new iTunes account on her Windows account? I would import my music into her library, but I would guess that she would not be able to share my purchased music or apps
- Do something else?
Please let me know the best approach. Thanks.

Keep your separate logins, itunes accounts, outlook, etc., you can still share itunes content, as permitted under the EUSLA.
Launch itunes under your WIFE"S computer login. Disable auto sync when an ipod/iphone is connected, under preferences(under the edit menu), in itunes. Log your WIFE out of her itunes account, log in using YOUR account details, connect YOUR phone, DO NOT SYNC. Go up to Store>Authorize This Computer. Then, File>Transfer Purchases. Once complete, EJECT YOUR phone. Log out of itunes, log your WIFE back in. Connect HER phone, select what content you want on HER phone, hit the sync button. She likewise can transfer purchases to your account, thus you both can share content. All updates to Apps must be done using the same account originally used to obtain them. Log in, update, log out.

Looking for best way to edit 29.97 and 25 fps footage together.

Hi everyone.
I've looked on the boards, but haven't found exactly what I'm looking for.. any help is appreciated.
I'm starting a job shot in Argentina, and they shot both 25fps and 29.97fps. I believe they used DSLR cameras.
I think the delivery format is web only, but am awaiting final word.
Questions-
Do I need to convert the footage to one frame rate, or will PPro handle the different rates in the same timeline without the footage looking awkward?
Can I just have PPro interpret the media as a different frame rate?
If I need to convert, would you please recommend best software?
Would you recommend converting to 29.97 or 25?
Thanks all. Much appreciated.
Michael

I am inclined to say edit 25fps and then the dropped frames of the 29.97 should not look too bad with most footage. You mileage may vary. It really depends on the footage. It could make it look choppy. But maybe better than 25 played at 29.97 using frame blending to make new frames out of thin air.
Create your 25fps sequence from the 25fps footage. Then when you drop the 29.97 on it, it will automatically drop the frames necessary to make it 25fps.
If, however, you are going to write it to DVD, you want to do that in the PAL or NTSC settings you would normally use for wherever it is that you live.
By the way, if you interpret the 29.97 as 25 it will play back slower. Slightly slow motion. If you interpret the 25 as 29.97 it will appear fast. Once again, it depends on the footage. If you shot objects (like travel stuff), then speed is not a huge deal, but if you shot people or animals it could make a huge difference.

Looking for best way to convert 35 mm slides to digital images

Hello Apple Community,
Am researching best ways to convert several hundred 35 mm slides into digital images. There are numerous scanners/converters out there but want to ensure I get the best unit compatable with my iMac (27 inch, Late 2009). Any suggestions welcome.

For scanning 35mm slides you need a scanner with a good photometric resolution and geometric resolution.
For the photometric resolution: Get a scanner with a high density range (D-max) value, to get a good resolution of highlights and shadows.
For the geometric resolution - sharpness and detail - try to get at least 3200 dp,i to be able to get good 8"x10" prints from your scanned slides, a higher dpi value, if you want to be able to print larger images.

Looking for best way to test for a program

I like test path better. My problem is through all the different versions of office they cant all install to the same directory. Research time.

I'm writing a script that will automatically install Outlook 2010 if Office 2013, 2010, 2007, or 2003 are not installed. It's part of a script I already have each tech has to run locally due to management decisions(that I have no control over). Right now I prompt the tech if they want to install it. Then test for the installer and install it.
PowershellDo{$outlook = read-host "Would you like to install Outlook 2010? y/n" IF ($outlook -eq "y") { If (Test-Path -Path C:\Update\outlook2010) { saps -filepath C:\update\outlook2010\setup.exe -wait } Else { Write-host "Outlook is not in the update folder!" -ForegroundColor Red } }ElseIF ($outlook -eq "n") { Write-Host "Please make sure there is an email client." -ForegroundColor Yellow }}While ('y','n' -notcontains $outlook)What I would like to do is remove the prompt as it's a volume license...
This topic first appeared in the Spiceworks Community

Looking for best way to display thumbnail images

i am new to dreamweaver. I can get my thumbnail images to
open, but I want them to open in a new window and preferably one
that is sized according to the picture. how do i do that?

James Shook wrote:
> I just haven't seen any sites lately
> that use pop-ups specifically requested by the viewer.
Really? I see them all the time. Random examples I just found
now:
https://www.econsumer.equifax.com/otc/showmyequifax.ehtml :
click on the
"Terms of Use" link at bottom of page.
http://www.portlandonline.com/
: click the "Disclaimer & Privacy Policy"
link at very bottom of page.
http://naturemade.com/UserAccount/uar_reward.asp?tab=Rewards
: click on
the "Forgot your password?" link next to Go button.
and my own
http://sethshulman.com/seth_shulman_bio.php
: you'll see
icons indicating which links will open in a new window.
http://www.platinummtb.com/team.htm
: click on the team image.
I think popup windows are in fact used quite frequently,
often to good
effect.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

What is the best way to make a list of addresses for envelopes or labels? Address book, numbers or pages?

What is the best way to make a list of addresses for envelopes and labels? Address book, Pages or Numbers?

I liek your idea of having multiple images in a grid. I think
that would be the best bet as you mentioned. Having one big picture
would be hard to distinguish the sub-areas with mouse coordinates.
I think checking the coordinates for the mouse would be very
tedious because I would have to check for the left boundary, the
right, top, and bottom for each sub-area!
What do you mean by using button components and reskinning.
Is this simply using buttons and changing the way they look? I'm
just trying to save time and memory, because if I had a 10 by 10
grid, thats a hundred buttons. Wouldn't that slow down the machine
alot? And for that matter wouldn't having a grid of 10 by 10 images
also by the same deal?
Thanks for the input, I'm just trying to find the most
efficient way to do it.

Looking for best apple software for image extraction i.e. select an image from one photo and place it on another photo

looking for best apple software for image extraction i.e. select an image from one photo and place it on another phot

Cannot guarantee it's the best, but it certainly is the least expensive:
http://www.gimp.org/downloads/

We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter

We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter who on our network opens the design file.

The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Looking for a way to directly choose keyboard layout.

I'm looking for a way to organise separated keyboard keys combinations (or single keys - the best) for every keyboard layout. I want to be able to choose layout directly. One unique key (keys combination) for each layout.
One way may be smth. like setting a key to execute a command:
setxkbmap -layout "us,ru"
and
setxkbmap -layout "ru,us"
For keys setup in OpenBox may be used obkey, for example.
In general it works. But in such a case, when not latin/english layout is the first one, or even single one, in the command's layout list, applications will not react on Ctrl-S, Ctrl-Z and so on. It do not depend on current layout, it depend on the first entry in last sequence to be used in the layouts list.
I'm shure there are some other better ways to implement the idea. Please, give me advise: what a tool, or tool set to study and use?

Stack wrote:
the sad clown wrote:
(just make sure that the changed layout doesn't break your keybind):
setxkbmap -rules xorg -model pc104 -layout us -option
Just change the layout parameters (and any other changes you need) for as many layouts as you want.
Unfortunately, if the single layout, or first in the list layout is not 'us', but my national, GUI applications will stop to react on Ctrl-S, Ctrl-Z and similar things.
Can it be fixed?
Is it that Ctrl-[S,Z] don't work or that they change locations because the keyboard layout has been modified? The first is a problem, the second is to be expected if you are changing the keyboard layout.
Stack wrote:
As I catch, for testing there is no difference between setxkbmap and xorg.conf. Also, there is no way to specify there layout specific switch combinations. In coma separated list of values for XKbOptions there is not binds to corresponding position in layouts list. All the combinations will do the same - cycle between layouts. http://www.xfree86.org/current/XKB-Config2.html#5
Layout itself and layout switching mechanics are too different objects (or classes) in terms of programming. I'm not shure I'll be on a right way, if I'll decide to dive deeply into syntax of '/usr/share/X11/xkb/rules/xorg' and '/usr/share/X11/xkb/symbols/*' (mentioned at https://wiki.archlinux.org/index.php/Co … _xorg.conf ) and hacking of ready to use layouts. If I'm searching for a way to switch them only. Am I right?
My suggestion isn't that you use the XkbOptions switch since this won't work for what you are asking. Instead, I'm recommending you use a little keyboard shortcut utility, xbindkeys and use that to issue the setxkbmap command I mentioned earlier. All you have to do is bind the shortcut to keys that don't change across keyboard layout changes (if you have a number pad, an easy solution is to use a modifier + one of these keys as it won't change). This isn't a toggle like the xorg.conf edit, but can switch to any layout you choose to bind in any order you choose to perform.

Looking for a way to Export Still Image to iPhoto

Hi I'm looking for a way to export a still image from iMovie 08 to iPhoto 08? The simple drag, help, web search etc doesn't seem to come up with an answer but it's been a long day.
Thanks

Find the still within an event clip, right mouse, select add still frame to project. Repeat for all the stills you want.
In Finder under pictures, you should find files for all the stills you created. Import them into Iphoto and there you have it.
There is probably an easier way but this is not too bad.

Looking for best practice on application scope beans

Hey â€“ a portal newbie here. Iâ€™ve got some application scope beans that need to be initialized on startup. First thought was to create a servlet that would set the bean. Then I saw the GlobalApp setting, but I think that looks like it is more session scope than applicationâ€¦ Looking to be corrected here if I am wrong.
Is there a place where these type of things traditionally happen? Read only, so no cluster worries (I think) Using WLP 8.1 SP4 and looking for best practices. Thanks for the help!

To support "code sharing" you need an integrated source code control system. Several options are out there but CVS (https://www.cvshome.org/) is a nice choice, and it's completely free and it runs on Windows, Linux, and most UNIX variants.
Your next decision is on IDE and application server. These are usually from a single "source". For instance, you can choose Oracle's JDeveloper and Deploy to Oracle Application Server; or go with free NetBeans IDE and Jakarta Tomcat; or IBM's WebSphere and their application server. Selection of IDE and AppServer will likely result in heated debates.

Looking for best practice on J2EE development environment

Hi,
We are starting to develope with J2EE. We are looking for best practice on J2EE development environment. Our concern is mainly on code sharing and deployment.
Thanks, Charles

To support "code sharing" you need an integrated source code control system. Several options are out there but CVS (https://www.cvshome.org/) is a nice choice, and it's completely free and it runs on Windows, Linux, and most UNIX variants.
Your next decision is on IDE and application server. These are usually from a single "source". For instance, you can choose Oracle's JDeveloper and Deploy to Oracle Application Server; or go with free NetBeans IDE and Jakarta Tomcat; or IBM's WebSphere and their application server. Selection of IDE and AppServer will likely result in heated debates.

Looking for a way to switch views using Javascript

Hi ! I'm currently studying Acrobat 3D. I've got a PDF document with a 3D Annotation, which was imported from a U3D file. I defined 3 views : "initial", "front" and "top". My problem is that I'm looking for a way to switch views using Javascript. In fact, when I list cameras using the following code, I only get one camera called "DefaultView". So my question is : where has my "initial", "front" and "top" views been ? Is there a way I can switch between them using Javascript ? for(i=1;i<scene.cameras.count;++i) { Cam = scene.cameras.getByIndex(i); console.println("camera " + i + " : " + Cam.name); } Thank you very much in advance. françois

Are the dates on these entries correct??!! Doesn't seem like it. Anyway, just in case, here's some code to help:
//=========================================================
backgrounder = new RenderEventHandler();
backgrounder.onEvent = function(event)
runtime.removeEventHandler(this);
canvas = event.canvas;
background = canvas.background;
keyer = new KeyEventHandler();
keyer.onEvent = function(event)
switch (event.characterCode)
case 49:
cam = scene.cameras.getByIndex( 0 );
canvas.setCamera( cam );
break;
case 50:
cam = scene.cameras.getByIndex( 2 );
canvas.setCamera( cam );
break;
case 51:
cam = scene.cameras.getByIndex( 3 );
canvas.setCamera( cam );
break;
runtime.addEventHandler( keyer );
runtime.addEventHandler(backgrounder);
//inform user
console.println("Use the 1,2,3 Keys to toggle between cameras");
//===============================================

Looking for best way to select a list of components

Similar Messages

Maybe you are looking for