Looking for choir/vocal samples

I have a MacPro and am learning the basics of Logic 7. I compose classical and orchestral types of scores and am looking for some choir/vocal samples that I can use to lay down tracks for vocalists (so they can learn the parts) and as alternatives to 'live performers'.
The only two that I have found on the threads here are:
1. Bela D Media's Diva Voices/ Children's Choir
2. EastWest/Quantum Leap Symphonic Choirs
I haven't heard to many good things about NI compatibility with logic and am wondering if there are samples that may be used in Logic's native exs24 sampler.
Much of the music is for church and for small vocal groups.
Any suggestions for other vocal samples or insight from users who are actually using these samples successfully in Logic would be greatly appreciated.

Hey Green,
1. Yes, AKAI converts ok to EXS, no sweat!
2. Logic! Open the EXS, drag the 4 CD-Roms to A Folder on the HD,
if this folder is on a different partition from Logic, make an Alias
of that folder and drag it to the Library (have a peak on the manual
to know where to drop it, probably: System>Library>Application Support>Logic>Sampler Instruments).
Then in EXS (top right) Click on options AKAI Convert.
Simple.
3. I have my samples on a 5400rpm drive (Powerbook).
I have a dedicated drive for audio (7200 rpm LACie).
To convert and load samples for the first time it may took you a bit.
but once you have load a bank it's pretty fast.
I've just Loading say, the London Choir Ahs Bank (boys & girls),
in 2 to 3 secounds! :o)
Once it's loaded it's just like a preset, don't worry.
Best regards,
Jorge

Similar Messages

  • Looking for Education Related Sample Pages

    I am looking for "Education" related sample pages or sites to
    use for our districts. The current sample pages in Dreamweaver 8
    only have business related pages.
    Mr. Tony Amsler
    Monticello Community Schools
    850 East Oak St
    Monticello, Iowa 52310
    Email: [email protected]

    A quick Google search will give you one and a quarter billion
    "school" pages
    to inspire you.
    "TonyAmsler" <[email protected]> wrote in
    message
    news:frs0on$e9u$[email protected]..
    >I am looking for "Education" related sample pages or
    sites to use for our
    > districts. The current sample pages in Dreamweaver 8
    only have business
    > related pages.
    >
    > Mr. Tony Amsler
    > Monticello Community Schools
    > 850 East Oak St
    > Monticello, Iowa 52310
    > Email: [email protected]
    >

  • Looking for updateTask, delegateTask samples

    Hi all,
    I'm looking for some complete and good samples of how to use updateTask, deletegateTask, ... in workflow context (BPEL manager or java API).
    The scenario is quite simple:
    - a user U1 has to complete a task
    - after a while, if U1 does not complete it, the task will be transfer to user U2
    - ... etc
    U2 is a random user. There is no hierarchical link between U1 and U2 so it's not a "real" escalation scenario ...
    I hope somebody can help me ...
    Cyryl

    Hey Green,
    1. Yes, AKAI converts ok to EXS, no sweat!
    2. Logic! Open the EXS, drag the 4 CD-Roms to A Folder on the HD,
    if this folder is on a different partition from Logic, make an Alias
    of that folder and drag it to the Library (have a peak on the manual
    to know where to drop it, probably: System>Library>Application Support>Logic>Sampler Instruments).
    Then in EXS (top right) Click on options AKAI Convert.
    Simple.
    3. I have my samples on a 5400rpm drive (Powerbook).
    I have a dedicated drive for audio (7200 rpm LACie).
    To convert and load samples for the first time it may took you a bit.
    but once you have load a bank it's pretty fast.
    I've just Loading say, the London Choir Ahs Bank (boys & girls),
    in 2 to 3 secounds! :o)
    Once it's loaded it's just like a preset, don't worry.
    Best regards,
    Jorge

  • Looking for SQL*Loader sample file

    Hi all,
    I'm looking for a sample SQL*Loader file that I could use to populate the Bank Statement Interface in Cash Management (Receivables Lockbox Receipts) - specifically CE_STATEMENT_HEADERS_INT_ALL and CE_STATEMENT_LINES_INTERFACE.
    I'm trying to put together an interface from Bank of America's Lockbox into our Oracle Receivables system (11.0.3), and don't have access to anything from which to start from.
    Thanks in Advance,
    Cam

    check it
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch10.htm#1656
    kuljeet pal singh

  • Looking for SATSA-APDU sample

    Hi,
    hope you can find few minutes to help me out.
    I've developed a J2ME application that runs on Cellulars.
    I'm asked to do one of the following 2 things for additional security:
    - Store the application data on a SIM card.
    - Store the whole application on a SIM card in a way that the user can open it form the Cellular menu. The application will manage the data on the SIM.
    I have some basic questions like:
    - What is needed in order for me to access the SIM and creating a data store on the SIM.
    - Does the J2ME application need some authority from the cellular provider to actually access the SIM ? If not, what prevents others from accessing the same data store ?
    - How do I "load/import" a J2ME application to my own Cellular SIM card ? I know how to download OTA a J2ME application, but not to the SIM card.
    I'm also looking for a sample code.
    I'd be very grateful if you could either support me - or put me in the right direction.
    Regards,
    Arnnei
    [email protected]

    Support for (U)SIM Application Toolkit
    If an implementation allows J2ME applications to
    communicate with (U)SAT, support for communication
    with (U)SAT should be implemented as specified
    below.
    The main technical constraints are
    The APDUConnection can be used to communicate with
    (U)SAT applications on channel 0. The following
    sections describe the constraints and methods in
    supporting communicating with (U)SAT applications.
    Technical Constraints
    1.     The operator domain has full and exclusive access
    to this connection.
    2.     Only ENVELOPE APDUs may be sent. For
    all other APDUs IllegalArgumentException is thrown.
    3.     The class byte MUST be set by the implementation
    which will be either A0 or 80 depending on whether
    the phone is running GSM or UMTS. The class byte
    supplied by the J2ME application will be ignored.
    4.     In the case when (U)SIM responds with status word
    '9E XX' or '9F XX', the behavior of APDUConnection
    would be the same as when status word '61 XX' is
    received from the card.
    5.     In the case when (U)SIM responds with status word
    '62 XX' or '63 XX' the implementation MUST send GET
    RESPONSE to the card with Le set to '00' before any
    other command is sent. The implementation MUST make
    sure that between sending the ENVELOPE APDU,
    receiving status word '62 XX' or '63 XX', and sending
    GET RESPONSE APDU with Le set to '00', there MUST not
    be any other APDU exchange on any logical channel
    with the card.
    6.     When the J2ME application sends an ENVELOPE APDU
    to the (U)SIM, the native application may be
    performing a proactive session. In this case the
    (U)SIM MUST manage the synchronization issue. The
    (U)SIM may respond with status word '93 00' (SIM
    Application Toolkit is busy) when the (U)SIM is
    performing another proactive session.
    From this we can identify that Only ENVELOPE commands
    can be send to SIM card.But there is no document
    about ENVELOPE commands and what are they ?
    For accessing the SIM card we need to know these
    things.
    Guys do have any idea on this or where can i get info
    on this.
    regards
    Abhijith V RHi,
    A way to send Envelope in windows mobile is using RIL
    http://www.itsx.com/index.html?pocketpc-ril.html~mainFrame
    I know that if the operating system is windows mobile 2005 you can send directly APDU while if you have windows mobile 2003 you need to use envelope.
    I have found some info regarding envelope in:
    http://webapp.etsi.org/action/PU/20050510/ts_102223v060800p.pdf
    I have a pocket PC 2003 so I am trying to use envelope to send command to an applet in the SIM.
    Are you sure that if the card has a GSM module the only way to comunicate with an applet installed in the card is using Envelope, i.e. if I use an external reader or similar can I use APDU?
    thanks,
    M.

  • Looking For Ludwig Drum Sample

    I am currently in the midst of a project of recording Beatles covers and while I love practically everything about Logic, I can't say I'm all that keen on the drum samples, especially as I'm not too interested in the electronic stuff, etc. However, I figured, as I am doing Beatles covers, and with the litany of stuff available, I was wondering if someone could guide me as to where I could find some nice, vintage Ludwig drums, if it's possible. Help is greatly appreciated. Thanks!

    The only difference between the two products are the kits that were sampled. Custom and vintage is, well, "custom and vintage kits", where as the superior is more "modern."
    Here is more info on both kits:
    http://www.toontrack.com/custom_vintage.shtml
    http://www.toontrack.com/superior.shtml
    Have a listen to the demos and see which one will work best for your projects. I'm sure you'll love either one you go with! Best of luck with the project!
    edit: BTW, I dont know how much of a drummer/programer you are, but if your not into creating your drums from scratch and would rather use pre-created drum parts played by real drummers, check out http://www.ezdrummer.com/prodinfo_ezd.asp They even have one called "Vintage Rock" which maybe right up your alley! In fact, if I were to do it over again, I would probably pick this option as its seems much quicker to produce realistic results (Though I'm very happy with DKFH Superior).

  • Looking for Helicopter sound effect

    Ive come close to creating it by altering a synth basic sound, but its still off a little. Any ideas?

    Are you looking for a helicopter sample, or an AU that makes your pre-existing sound into a helicopter effect?
    If it is the former, Hang and Christoph gave you some nice examples, and you can do a google search for "Helicopter Sound Effects."
    If it is the latter, this free au plug in does a nice job of simulating it.
    http://www.twofloorsrecords.com/?page_id=49
    X

  • Looking for sample code of HOW-TO use EntityFacadeImpl class

    I have created the following using JDeveloper Ver 9.0.3.1:
    1. Entity Bean
    Localinterface: userLocal.java
    Local home interface: userLocalHome.java
    Remote interface: user.java
    Remote home interface: userHome.java
    Bean implementation: userBean.java
    2. Facade Session Bean (auto generated by JDeveloper)
    userFacade.xml
    userFacadeColImpl.java
    userFacadeImpl.java
    I am looking for sample client code on how to make use the facade session bean.
    Thanks in advance.

    repost

  • Looking for samples of JKM and RKM

    Hello everyone!
    I'm looking for samples of JKM and RKM.
    Do You have it?
    Best regards

    Hello
    Now I have found them.
    It was placed on oracledi\impexp.
    Thank You for right direction!
    Best regards

  • Looking for sample code to create my own pub/sub!

    I am a new bee in JMS. So I would really appreciate if
    some one could give me some hint to start up with my school project. I am looking for a sample Java code that will:
    For the Publisher:
    1. Connect to a broker [create it, if it does not exist]
    2. Create a publisher/destination.
    3. Create a pub-sub queue
    4. Publish a message
    5. Ack or Nak depending on if the subscriber got or did not get the message.
    For the Subscriber:
    1. Connect to a broker [create it, if it does not exist]
    2. Subscribe to the broker
    3. Subscribe to the Queue
    4. Show an received messages on the console.
    Here are the command line params for both the Publisher and subscriber:
    runPub 127.0.0.1:7676 myTestBroker myQueue "this is my message"
    runSub 127.0.0.1:7676 myTestBroker myQueue
    Please tell me if there are similar java code that will do all this and work with ANY JMS compatible client. i.e. I should not have to use the Admin tool of any JMS Server (MQSeries, iPlanet, SonicMQ etc etc). The code should follow the JMS spec and do this programmatically.
    Thank you very very much in advance for doing this great favor.
    With regards,
    Amir.

    Thanks a lot for that hint. I think that's a great tutorial for a beginner. I could compile those sample codes from chapter 4 with out any problem, but could not run it. I also installed j2sdkee1.3.1 and updated my classpath according to the spec. But when I tried to run the "j2ee -verbose" command it was giving me the following error message:
    ERROR: Set J2EE_HOME before running this script.
    Any advise for me that I should follow next. Thanks again.

  • Look for JDeveloper Tutorial with samples code

    Hello All ,
    my name is Ron ,
    i'm new user of JDeveloper i'm looking for a place to start a tutorial "How to use
    the JDeveloper ? " with samples code .
    from very basic use ( Hello world program ) to addvanced programming ( Like GUI Forms and Database )
    please show me links where to start learning from
    thanks in advance

    The tutorials in the JDeveloper help system are a very good place to start. Choose Help | Help Topics from the JDeveloper menu then click the Tutorials book in the Help navigator. The tutorials are also available on OTN, see:
    http://otn.oracle.com:8877/jdeveloper/help/
    You may also find the 'how to' documents and samples on OTN helpful:
    Oracle9i JDeveloper How To Documents
    http://otn.oracle.com/products/jdev/howtos/content.html
    Oracle9i JDeveloper Sample Code
    http://otn.oracle.com/sample_code/products/jdev/content.html
    Hope this helps.
    - jon

  • Looking for sample code using "first_tab" and "next_tab"

    Looking for sample code using "first_tab" and "next_tab". How is it used with ItemID within a dialog box? I've read the reference books - don't understand it.

    Hi Ray,
    There are several ways to do this, and in the example I created, I actually did not end up using shift registers. I've attached some example code that basically multiplies the period by the duty cycle percentage to achieve the number of milliseconds to be high and low.
    You would just need to insert your DIO code in each frame of the sequence structure.
    Hope that helps. Kind regards,
    -Sam F, DAQ Marketing Manager
    Learn about measuring temperature
    Learn how to take voltage measurements
    Learn how to measure current
    Attachments:
    70_PWM_Example.vi ‏23 KB

  • Looking for sample code of pwm output with Labview 7

    we are looking for sample code in LabView 7 for producing a pwm output. We are current using a 3rd party digital I/O board and just want to generate a pwm output on several of the bits.

    Hi Ray,
    There are several ways to do this, and in the example I created, I actually did not end up using shift registers. I've attached some example code that basically multiplies the period by the duty cycle percentage to achieve the number of milliseconds to be high and low.
    You would just need to insert your DIO code in each frame of the sequence structure.
    Hope that helps. Kind regards,
    -Sam F, DAQ Marketing Manager
    Learn about measuring temperature
    Learn how to take voltage measurements
    Learn how to measure current
    Attachments:
    70_PWM_Example.vi ‏23 KB

  • Looking for Analog Out example using DMA and C++; cannot find sample "GenMultVoltUpdates_SWTimed"

    Looking for example for Analog Out to multiple channels using DMA and C++.  Found reference to sample "GenMultVoltUpdates_SWTimed" which I do not have and cannot find.

    Hello Gerry,
    When you install DAQmx, there is an option to install
    support for Measurement Studio.  When you
    select this option, it will install these examples onto your hard drive.  All of the examples can be found at the
    following location: (C:\Documents and Settings\All Users\Documents\National
    Instruments\NI-DAQ\Examples\DotNET2.0\Analog Out\Generate Voltage)
    Respectfully,
    Rob F
    Test Engineer
    Condition Measurements
    National Instruments

  • Looking for an advanced prototype sample

    Hey,
    I'm an Interaction Designer at a digital full service agency
    in Scandinavia, and I'm trying to find examples showing how
    suitable Fireworks CS3 is when working with clickable website
    prototypes. I'm looking for examples of interactive prototypes made
    with Fireworks CS3. And I would lik all this to show:
    - clicking between subpages
    - drop-down menus
    - roll-over buttons
    - creative and advanced menu design
    - AJAX-imitating interactions
    - animations
    Does anyone know of such a sample?

    Is Devil's Pie what you're looking for?

Maybe you are looking for