Looking for hdd, which mark n model ?

What hard drives do you recommend for a raid of two disks of 500gb?
I can not spend too much money ...

Actually in the benchmarks we have run the 2 drive raid 0 gives you optimal performance with most codecs. The export times are slower with the media on a single drive. The risk is greater but backups are required whether you run 1 disk or 2 in a raid zero. So the failure rate is the same concern.
Eric
ADK

Similar Messages

  • HT204266 i am looking for Apps, which can automatically record all the incoming & outgoing calls, which later on can be emailed.

    I am looking for App, which can do automatically record all the incoming & outgoing calls & later on same conversation should be whatsapp or emailed.

    I actually figured it out......  this was the answer:
    dial-peer voice 1 pots
    destination-pattern 1..........
    no digit-strip
    port 0/0/0
    forward-digits all

  • Looking for Fm which display Blocked status

    Hi ,
    I was looking for a function module which displays the  blocked status in GTS system, i know one '/SAPSLL/CD_STATUS_GET' which exist ECC system, but i am looking for which is in GTS system.
    Could you plz help me out with this issue.

    Hi Ashok
    To answer your question some more context would be useful.  What inputs do you have to identify the document?  The reference document -OR- GTS customs document?  There are lots of standard function modules available such as /SAPSLL/CUHDSTA_DB_SGL_READ which provides the customs document header statuses for SPL, License and Embargo checks from the document header status table directly.  The inputs for this would be the GUID from table CUHD.
    The function module used when ECC calls GTS using /SAPSLL/CD_STATUS_GET is /SAPSLL/API_6800_STATUS_GET, this is another possibility. 
    Hope that helps.
    Rachael

  • Looking for BAPI which can post condition records.

    Hi ,
    I am looking for a bapi which can post the condition records. I need to post Maximum Condition Base Value KONP-MXKBAS along with other fields. I found already one bapi BAPI_PRICES_CONDITIONS which has this field but if I execute
    the bapi with BAPI_TRANSACTION_COMMIT it is not posting any data at all. So could any one please help me out of this or if any other alternate BAPI* or any other solution is possible here. But one thing to mention here that LSMW,BDC is not possible to use.
    Thanks in advance.
    Best Regs
    Somnath

    Hi!
    In most common, standard BAPIs are working correctly.
    Here are a the following cases if they aren't:
    - standard fault, mostly has a correction note at OSS (very rare case)
    - the BAPI is not finishing succesfully. In this case, you always have to check the return table of the BAPI (BAPIRET2, or RETURN, etc...). In this table there is the error. Mostly it occurs due to incorrect customizing settings.
    Please check the return table of your BAPI, and you'll find out the problem.
    Regards
    Tamá

  • Hello, I'm looking for software which allows me to create purchase orders in front of the customers with digital signature

    Also, it would be great if I could make my purchase order by indicating my product and adjusting the quantity.
    Once, order is made that my quantity in stock is also adjusted.  Hope you'll know what I mean ?

    And also the possibility to have my orders converted in packing slips and invoices... :-)

  • How the transactional replication work for simple recovery database (looking for some internal concept)

    How the transactional replication work for simple recovery database (looking for some internal concept)
    Rahul

    There seems to be a new myth going around recently. I’ve had at least three people tell me, in the last month, that SQL’s transactional replication requires the database to be in full recovery.
    This is complete fabrication. Replication (SQL native replication, that is) can work with the databases in any of the recovery models.
    Transactional replication does involve the transaction log, as that’s where it picks up changes from. The log reader scans over the transaction log looking for log records marked for replication, copies those to the distribution database and then marks them
    as replicated. When the checkpoint (for simple recovery) or log backup (for full or bulk logged) occur, the log will only be truncated up to the oldest inactive, replicated transaction.
    Because transactional replication has its own way of ensuring log records aren’t discarded before been picked up by the log reader, there’s no requirement for a specific recovery model.
    Refer this link
    http://sqlinthewild.co.za/index.php/2008/12/05/a-new-sql-myth/
    --Prashanth

  • Mac Pro App crashes while looking for server that no longer exists

    PROBLEM:
    Motion crashes every time I try to launch. Before it crashes, a window appears with the message: "Looking for "G4MDD"--which is my old G4 machine.
    BACKGROUND:
    I kept my old G4MDD networked to my MacPro Intel machine for a while during my hardware migration due to Motion app instabilities I was experiencing.
    Finally, with Motion v2.1.2, I was able to run Motion on my MacPro reliably.
    I disconnected G4MDD from the network, deploying it to another building, dedicated to other non-FCP purposes.
    I have not been able to launch Motion 2 on the MacPro since. It goes out looking for G4MDD, then crashes every time.
    REMEDIES I'VE TRIED:
    Everything Apple suggests on the Motion troubleshooting page, including re-install of the app following all instructions meticulously.
    QUESTIONS TO GROUP:
    1) Is there some server-related preference file I can try trashing?
    2) Any other suggestions?

    The location should be /Users/your name/Pictures. You can change this by holding down the option or alt key (the ones immediately to the left or right of the cmd keys either side of the spacebar) whilst clicking on the iPhoto application icon in your dock and making an informed choice from the options you see.
    By default iPhoto creates an iPhoto Library (the folder where all your data in iPhoto is stored) in the /Users/your name/Pictures folder. It seems that in the past you must have selected an externally or network attached volume named TOSHIBA as the location for the iPhoto Library instead using the instructions I've given you. All you have to do is revert it back to the location you now want.

  • Looking to buy a refurbished MacBook Pro for video editing. Need suggestions on what to look for.

    Hey Everyone,
    I already own a 2012 Mac Pro Desktop. I do some pretty advanced video editing on it, using FCPX and After Effects, with FXFactory and many other plugins.
    I need to invest in a MacBook Pro so I can transfer my projects and edit at different locations.
    I'm looking for a refurbished or used model to save some money where I can.
    My budget is not too large, but I can probably manage $1,000 - $1,500
    Can anyone suggest a good model (im guessing 2011-2012) and a good graphics card to look for, so it can handle this type of stuff. I will obviously max out my RAM also.
    Thank you so much for all the suggestions in advance!!

    Hey BobRzand OGELTHORPE
    Thanks for your reply! BobRzJust looking to clarify.. When you said "Also, that's typically not on the 13" models but is on the 15" (or the 17..." were you referring to the onboard graphics memory? Should I stay away from a 13 inch? I'm going to follow OGELTHORP''sadvice and go for the 2011 model. The 13 inch are the most affordable and I've found ones with a 2.8GHz Processor that is right in my price range. Thanks again for your help guys!

  • Is there a good video available for beginners which will show what Photoshop can do?

    I'm trying to find a good video which will give a general introduction to what Photoshop can do - not how to do it - for a group of beginners at our local photographic society.
    Ideally I'm looking for something which lasts 15 - 20 minutes and will demonstrate how Photoshop can be used for correcting and manipulating images, plus a short section on how it can be used more creatively.
    Is anyone aware of such a video which is preferably free to use (with obvious credits), and where it's available from?

    There are multiuser/multiplatform apps that you can use to manage your photos that can view multiple source photos.  I use  Media Pro 1.  However, you can't use iPhoto and MP on the same set of original/source image files.
    I use MP as my primary DAM (digital asset management) application and iPhoto just for special projects like books, calendars, cards, etc.
    OT

  • Looking for change BADI in CRMD_ORDER tcode

    Hi,
    I have a scenario in CRMD_ORDER, when user changes quantity for an existing Sales Order a BADI should trigger. I should do some validations at item level and display error message.
    I tried CRM_ORDERADM_I_BADI and CRM_SALES_BADI . they didn't work as needed.
    I'm looking for a which should trigger for each and every click of a change BADI. The change can be on any tab.
    Thanks,
    Lalitha.

    Hi Lalitha,
    Please take a look at the vision CRMV_FIELDCHECK thru transaction SM30.
    Into this vision, you can assign a customized Function Module for a specific field of transaction order.
    I hope it helps.
    Regards,
    Gabriel Santana

  • Looking for an advice

    Hello, my name is Tom.
    I bought three other producers webcams, looking for one, which I could fully control from my applications. Especially, I would like to control camera's gain and exposure time (shutter speed) at runtime. That means - NOT through webcam's property dialog, but directly from code (using DirectShow's IAMCameraControl and IAMVideoProcAmp interfaces).
    If anyone could help me by pointing one or more webcams (maybe Creative), that will allow me to steer their GAIN and EXPOSURE parameters manually and from code (NOT from dialog box).
    Thanks in advance.

    Hi Tomasz,
    If you are looking for information on other brands, I would recommend looking at other forums aswell, or generic hardware forums. Please keep information on this board related to only Creative webcams.
    Ivan, I have removed your post, please do not advertise other brands on this forum.
    Cat

  • Looking for video effect...

    Hi All,
    I'm looking for a particular effect. I'm sure it's not available as a plugin.. I may have to look for an independent application, but if you have any ideas:
    I'm looking for something which will create a particular image, and on closer inspection, and at closer range, it's composed of many very small images. Ideally, I'd be able to animate it. Any one have any idea how to apporach this?
    THANKS

    This can be done to a limited extent in most graphics animation applications. Theoretically you could do it in FCE but it would be an enormous amount of work. Basically you do it the way you describe it. Get lots and lots of images of the right shade and tone and stack them in sequences and multiple sequences within them till you make up the image you want.
    One significant issue is the limited ability of the DV format to have sufficiently good resolution to be able to make this without turn the scaled images to mush.

  • Agent 10.2.0.3 install on OEL5 looking for OEL4 packages?

    We are trying to install Oracle grid control management agent 10.2.0.3 on OEL5 x86_64. The install is looking for packages which are not contained in OEL5. It is looking for pdksh, openmotif21, xscreensaver. These packages are available for OEL4. How do I install the agent?

    Please check the metalink certification.10203 agent is not supported against 64 bit OEL, it certfied only on 32 bit OEL.

  • Looking for pictures...

    Recently my MB when coming out of "sleep", shows the message "looking for pictures" which remains in view for a couple of seconds and then disappears. While its not a big deal, it is a trifle annoying. Anyone know what might be causing this message to appear.

    This sounds like it may be the screen saver you have selected (one that may display photos). Sometimes your display may be set to blank out before the screen saver kicks in so you won't see the message when it comes up... then if your machine goes to sleep... when you wake it, you'll see the message. If you select a different screen saver do you still get the message?

  • Looking for a ergonomic keyboard for my iMac

    I've used up (3) MS #4000 usb wired ergonomic keyboards since getting my Intel iMac 24".  I was a Mac to pc-user , but crossed back over in late 2006.  I had issues with the 4000 used with the pc and seem to use them up, getting only a year or so out of them before they go kaput. 
    Am looking for a wired or wireless model compatible with the iMac.  I just cannot get used to the regular keyboard again, I'm always hitting the wrong keys.  I hate to look down, rather look at the screen or other stuff; definitely not the keys.
    Any advice would be welcome.

    Something here? These are all Mac compatible
    http://www.macally.com/EN/Product/inputkeymouse.asp

Maybe you are looking for