Loose FP connection after Windows XP update

After completing Windows XP update, I always loose the connection to the FP-2000. I've had this problem several times and it always happened after windoews update completed.
To reconnect to the FP-2000, I've tried all thinkable things: restarting Ethernet Card, other driver, changing parameters, restarting XP, restarting FP-2000 and and and. But there is only one solution: Turn off the whole test system (PC, PXI with MXI, FP-2000, Hub...) for at least 4 hours, then it will work again. I know it sounds strange, but that's how it is!
Does anybody know similar problems? Is there an other solution than waiting 4 hours after each update?
Thanks for answering
Sparti

I have searched all available resources but I couldn't find any hints about a behavior like that. All PCs in our office have the automatic Windows update option enabled but no one has ever experienced a behavior like that so it's a bit hard for me to suggest a reasonable solution.
Here are some general ideas:
Is the Windows firewall activated (but if this was the case why should the issue be resolved after 4 hours???)?
Please check you PC's IP-configuration after the Windows update. Maybe the IP address got lost and for some reason your DHCP server reassigns a new one with a delay of several hours. If this was the case all network communication should be lost after the Windows update.
Try to reconfigure your IP settings in a command window with "ipconfig /renew".
Does the problem occurr with another PC, too?
I hope this gives you at least some ideas.
Best regards,
Jochen Klier
National Instruments Germany

Similar Messages

  • Loosing internet connection after Mountain Lion update

    Hi,
    I'm working with a MBP 2012 model.
    After the update to Mountain Lion, the MBP is loosing the internet connection now and then.
    I've did a PRAM reset, but the issue is still present.
    Are there any tips oder way to solve the issue?
    Thank so far

    I'm having the same problem on my brand new 2012 Macbook Pro with Mountain Loin. After being online for a while, Safari or Chrome will just stop connecting to the interent, even though everything says it's connected. I don't have this problem with other computers on the same network that are not upgraded to Mountain Lion yet.
    If I restart the computer, it works again for a while.
    Very frustrating.

  • I have serious problems with I OS 6 - I am loosing internet connection after a few seconds or minutes. What can I do? Can I come back IO S 5.1.1.?

    I am experiencing serious problems after downloading iOS 6. I am loosing my connection after a few seconds/minutes. What can I do? Can you come back to 5.1.1.? How can I do that?

    You can't downgrade the iOS.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • InDesign CS6 crashes at startup after windows 7 update

    InDesign crashes at startup after windows 7 update: Faulting module path: C:\Windows\system32\MSVCR100.dll (Microsoft Visual C runtime and update KB2538243 and KB2565063)
    Reinstalling did not help
    Also Adobe Encore CS6 seems to be affected

    I looked at the recovery files in:
    C:\Users\MyName\AppData\Local\Adobe\InDesign\Version 8.0\en_US\Caches\InDesign
    I deleted all the files and Indesign started up fine.  feeling good I closed Indesign and restarted.
    Indesign Crashed again.
    Deleted all files again and reloaded. 
    I went to "Edit:Preferences:File Handling:Document Recovery Data"  to:
    G:\Adobe\Indesign\Cache\Recovery
    Interestingly, the Indesign application recovery files still reside in the user directory above.   But the document recovery data moves to the G drive above.
    There is no clear reason why Indesign quit loading today.  It worked fine since initial installation last year.  But separating the document recovery data from the application recovery data seems to fix the problem for now.

  • Firefox does not open after Windows 7 updates

    After Windows 7 updates installed, Firefox 4.0.1 refuses to start. I click on the shortcut, the hourglass (blue circle in Windows 7) pops up for a couple of seconds, then it goes away, and no Firefox.
    Chrome and IE work fine.
    I have followed the tips on the "Firefox won't start" pages.
    In Task Manager, there is a 4,796k Firefox process, which I then end. If I attempt to start Firefox multiple times, I get different processes in Task Manager, of different sizes.
    I removed and re-installed Firefox 4.0.1. It made no difference. I even chose to have it delete all my customizations. No luck.
    I cannot start Firefox in Safe Mode. When I try, the same thing happens (hourglass, then nothing)
    I cannot start the Profile Manager. I created a new user in Windows, logged in as that user, and tried starting Firefox, but the same thing happened. This leads me to believe that it is not a profile issue.
    I do not get a crash report.
    Thank you for your help!

    Which Windows 7 updates were installed? Were these rated as "Critical"?
    Microsoft usually releases updates on 'Patch Tuesday' which always takes place on the second Tuesday of the month. That won't take place for another two weeks yet. I'm not aware of any out-of-band updates.

  • No network connection after windows 10 install

    No internet connection after windows 10 install- laptop wont recognize any wi-fi networks- repair option on MY ATT has no option for windows 10 system

    Hi,
    Sorry about that. One other thing to try is to try this in the command prompt:
    Start - All Programs - Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt. [For Windows 8 or 10: <Windows Logo> + x - Command Prompt(Admin)]
    Reset WINSOCK entries to installation defaults: netsh winsock reset catalog
    Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log
    Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log
    Reboot the machine
    If still having issues, you may need to uninstall your network adapter and install it again.
    -ATTU-verseCare

  • Safari can't connect after latest Lion update

    Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
    Safari Version 5.1.5 (7534.55.3)
    Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.

    Linc Davis
    Currently Being Moderated  Re: Safari can't connect after latest Lion update
    Apr 2, 2012 5:35 AM (in response to rtorca)
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down. 
    Press the power button. 
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone. 
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
    Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure?

  • Black screen after windows auto update

    New laptop in use for 3 weeks.  After Windows auto update restart I get to splash screen and am able to enter Windows password to log onto desktop.  After successfully entering password I am not able to view my desktop; I get the black screen with cursor function; cursor disappears when moved within an inch of left or right of screen (seems to go behind something).  I believe I am at the desktop but just not able to view it, because I receive app popups on the black screen (need to update McAfee, etc).
    In safe mode I restored to pre auto update date; manually installed all Windows updates;  worked fine until NEXT auto update, same problem.
    Graphics Card:  Stock Intel HD Graphics
    Monitor:  Generic PnP
    Why would it be fine with the manual update and not after auto update?
    I do not have an external monitor to attach this laptop for diagnosis.  I have run windows partition checks and hard drive partition checks with no issues to resolve.
    I did get an error message once when running a diagnosis (can't remember which) : Windows Update Error 0x80070490
    No real luck finding anyway for me (the average Joe) to resolve this issue.
    If this is a harddrive issue I don't want to keep pussyfooting around while my warranty window shrinks. 
    I have downloaded driver updates from HP, but cannot get the Synaptics Touchpad driver to download.  I don't think this is my issue though.
    I am going to manually update all my drivers then manually update Windows.  We will see what happens on the next auto update.
    Please advise if this is an issue I need to just give up on and return this laptop for replacement.  It seems like this is not a completely unheard of issue, but I'm shocked at what we are asked to do to attempt to resolve it.  Out of my depth.

    Hi @Justanothermom 
    Welcome to the HP Support Forums!
    I understand that you are having troubles with a black screen after an update. I am happy to help you with this.
    Firstly, there is nothing wrong with modifiying your update settings. I was going to suggest it myself as I read through your post, and then saw you ask the question. Sometimes updates can have unintended results by the creator. With all the different combinations of  hardware, and the fact that updates come from different sources, it is one of those things that is hard to completely control.
    Please see the following for how to make adjustments to your update settings.
    Turn automatic updating on or off - windows.microsoft.com 
    Or if you know which update seems to be causing the issue you can take a look at this page:
    win 8.1 August 12 updates - black screen after 2nd reboot - answers.microsoft.com
    Let me know if this helps at all.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Lenovo Y50 Not connecting to Internet after windows 10 update

    Just as the title says.
    I was able to install some windows 10 updates with wifi as my usb modem would not work
    After that i can't connect to the internet. I can connect to wifi and it shows internet access but i can't still connect to internet.
    One funny thing though i typed ipconfig in cmd and no ip address was found it shows something like media no connected.
    All my drivers are upto date. Downloaded directly from lenovo website. And they are all working perfectly according to device manager

    Also worked on 10.4.11. I installed an Airport Express and updated all the software and firmware on my MacBook. After Safari, Itunes store, Google earth could not connect but Firefox was connecting fine. Followed your tip. Disableing the proxies on the Network config does the trick. Very simple but very helpful, thanks.
    JC

  • Unable to connect after windows update

    window 7 updates and AVG updates occurred. Windows firewall is off and AVG firewall is not active. AVG was disable completely with not affect.

    Is your whole network down, or just Firefox? Are there any error messages?
    Contact your provider and have them test your service. Also, unplug your
    modem. Wait about 30 seconds before plugging it in.
    Some problems occurs when your Internet security program was set to trust the
    previous version of Firefox, but no longer recognizes your updated version as
    trusted. Now how to fix the problem: To allow Firefox to connect to the Internet
    again;
    * Make sure your Internet security software is up-to-date (i.e. you are running the latest version)
    * Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see
    '''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet?esab=a&s=Configure+firewalls+&r=0&as=s Configure firewalls so that Firefox can access the Internet.]''' {web link}

  • CD/DVD completely disappears after Windows XP updates

    I had this happen twice now, on my 3 year old Toshiba Satellite P35-s605.
    The internal CD/DVD drive works fine, then all of a sudden, it completely disappears from the system. Discs do not play, and the drive does not show up in Explorer.
    Likewise, it's the same with my external USB CD/DVD drive; it works fine, then it no longer shows up even though the USB "boing" indicates that the computer reads that a device has been connected.
    The last time it happened, I reinstalled the original recovery disk. That seemed to correct the problem. It disappeared again after a Windows XP update (I have not yet added any software besides the OS).
    Has anyone had this problem, and has anyone solved it?

    Satellite P35-S605 
    The last time it happened, I reinstalled the original recovery disk. That seemed to correct the problem. It disappeared again after a Windows XP update (I have not yet added any software besides the OS).
    I have never heard of a Windows Update causing that sort of problem. It sounds like hardware.
    Have you ever tried this fix?
       CD / DVD drive missing from 'My Computer' (Windows Explorer)
    -Jerry

  • Certain keys not working on Equium A200-196 after Windows 7 update

    Hi all, I've just upgrade my partner's laptop (a Toshiba Equium A200-196) to Windows 7 after initially installing Windows XP on it (it came with Vista).
    After the XP update, I noticed certain keys weren't working. I can't remember the process I used to fix the issue, but fix it I did, and they were all soon working perfectly. So it was a software issue, rather than hardware. I think it may have had something to do with the FN key - but I can't be sure.
    Now I've just upgraded the same machine and I have exactly the same problem. The keys that don't work are Backspace, W, P, F, H, K and L.
    Can anyone help please? I've tried reinstalling Win7 and the problem is still there.
    Many thanks,
    Andy

    >The keys that don't work are Backspace, W, P, F, H, K and L.
    These keys have nothing to do with the missing software.
    Indeed, the function key (FN key) needs an installation of particular Toshiba utility / software to get it working but the Backspace, W, P, F, H, K and L keys are common keyboard keys which dont needs any special software.
    Therefore I think the issue is hardware related: simple keyboard malfunction.
    I guess all these keys would work properly if you connect and use external USB keyboard.

  • 7510 e printer looses wifi connection after each print job;

    7510 e printer looses the wifi connection after each print job; only switching wifi off and back on at the printer touch screen makes it reconnect. Tried more or less everything, including downloading updated software for the printer. Wifi router (unfortunately) is provided by internet provider. WPA2.

    It sounds like the printer may have an unstable wireless connection.
    What brand and model is the router?
    Have you tried setting a static IP address?  I recommend setting a static IP address as it can resolve a lot of networking issues with printers in general.
    The steps to do this are located in step 6 of this document from HP.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • After Windows 7 update DRVLOAD.EXE error

    Hello,
    I have a problem. After an automatic update from the Microsoft site is my Windows 7 Home Premium not running anymore. At startup the following appaers: the error x: \ windows \ system32 \ drvload.exe and will not start up. I can not bring him to an old system date and the system doesn`t restart and the only solution is a reinstall.
    Did this and it works well he gets back within 81 updates and the problem occurs again. For the second time and reinstall the updates a bluescreen with irq problem. Now back to old date for updates again just works. At close, he installed the updates and restart the laptop again nothing works and the fault appers again.
    Now I installed him again and update SP1 manually. He starts normal up and after doing 41 updates the same happened.
    I will be a rather desperate and do not know what to do. I really hope that someone can help me here.
    Rayman76

    Hello,
    it is an Toshiba Satellite C650-15J.
    I did the recovery with the standard Toshiba disk rescue. On the recovery mode(F10). The operating system is Windows 7 Home Premium 64-Bit.
    I really dont know what to do. On my other laptop i have no problems.
    So i hope that anyone can help me
    rayman76

  • T61 no sound after Windows (Vista) update (?)

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds.
    i realize now that it has happened after a Windows (Vista) update.  I have done every step but 6.
    I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable). 
    http://support.microsoft.com/kb/948481
    >> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
    Message Edited by Suntea on 06-27-2008 12:50 PM

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds.
    i realize now that it has happened after a Windows (Vista) update.  I have done every step but 6.
    I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable). 
    http://support.microsoft.com/kb/948481
    >> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
    Message Edited by Suntea on 06-27-2008 12:50 PM

Maybe you are looking for