Losing the wireless network

I am using my Apple TV wireless on a g network to a mac mini via a b/g hub. So far three times in the last week i've come home and turned on the tv connected to the apple tv and noticed that the connection to the network is off. When I look at the network settings I can see my home n/w on the list but its just not connected and I have to reenter my WPA password for it to reconnect. After doing this all seems to work great... until the next time it fails a day or two later.
I've got 2 other mac's connected wirelessly to the mini on the hub and have no issues there at all.
Anyone else seeing this kind of issue, or have any idea what could be causing it?

I agree. I am having the same problem. For whatever reason, the AppleTV drops the wireless connection (even though it's literally 4 feet from the AP) and when I go to reconnect to the network, I have to re-input the key.
Apple, please update this function to retain the security key so that when we tell it to reconnect to the network we don't have to input the key again. VERY annoying.
Not terribly happy about it losing the wireless connection, but that is less annoying than the AppleTV not remembering the security key.
AppleTV AppleTV dropping wireless connection

Similar Messages

Need help here! I'm out of options. Computer can't see the wireless network

Sorry for the novel, but I have to tell you what is going on with my computer. I also need to vent because I’m extremely frustrated. I want to make sure I give as much info as I can we can get this fixed. I’m done with trying to figure this out on my own!!!
I’m having a major issue with the wireless network connection on my desktop. I’ve tried everything and I can’t figure out what it’s doing.
First of all, my wireless router is set up correctly (according to the Sticky), has active security, and works fine. It has nothing to do with the router. I’m sure of it.
Here’s a quick history:
When I was at my first residence in Chicago and bought a Linksys wireless N router in May 2008. My computer was about 30 feet away from the router and everything worked fine. Always found the router and never lost connection.
I moved to a new place in September 2008 and used the same router, computer, etc. at my new place. The computer was only about 7 feet away from the router this time, but I used the wireless connection instead so I wouldn’t have a network cable lying across the floor. At first everything worked fine. No issues. Then, one day out of the blue, my desktop lost connection with the router. My router didn’t even appear as an Available Wireless Network. I rebooted everything and that seemed to fix it. OK, issue fixed, right? Wrong. It did it again the next day. I rebooted everything, but it still couldn’t find my router. It did see lots of other wireless routers in the area though so I know the wireless card was working. It just didn’t see my router.
This went on for a while. Sometimes it would see my router and connect then it would lose it again. I thought maybe it was the router going bad. Well, I have a notebook computer too so I tried it. It has found my router every time and has never lost connection. I had it sitting on top of my desktop even to see if there was some sort of dead spot in my condo, but the notebook found my router just fine.
Sometimes my desktop would see my router, but it wouldn’t be my network name. It would call it “Home” or something. I know it was my network because it was the only network with maximum (Excellent) signal strength. I’m thinking it must be some sort of association issue. For some reason it doesn’t associate my router as an available network. I don’t understand that.
I tried everything: Ad Aware, Live OneCare, registry cleaners, driver updates, restore points, pretty much anything I found in the forums. Nothing worked for long if at all. It’s like my desktop only finds my router when it wants to. Note: The only thing that would work sometimes was if I clicked “Repair.” Sometimes that would work. I finally gave up and connected my desktop via network cable and unhooked my wireless card. I never lost connection as long as it was hard-wired.
The drama continues. I recently moved to Iowa and set up my network here. I’m using the same router, same desktop and wireless card, same notebook computer, etc. I went ahead and tried the wireless card on my desktop again. It worked just fine! No connection issues at all. It connected and stayed connected. I thought, “Well, that’s strange. It must have been something with the condo in Chicago. Oh well!” It worked fine from February 5 until March 10. Now it’s doing it again!!!! The notebook is about 3 feet away and sees the router just fine.
Here are the facts:
I’m using a Linksys WRT300N Wireless-N router.
I’m using a Linksys Wireless-N PCI WMP300N Adapter (about 18 months old).
I’m running Windows XP on the custom built desktop and Windows Vista on the HP notebook.
I built this computer about 5 years ago and have not done any major upgrades for 2-3 years. The only thing I added was the wireless card. I also changed out the HD in January 2009 and did a data migration right before I moved to Iowa in February. All of the networking issues were going on well before I did the data migration though so it has nothing to do with that. In fact, I had my computer hard-wired into my router at the time of the data migration and the wireless worked fine (for a little while) after I moved to Iowa. So if anything, the data migration seemed to help with my wireless connection.
All drivers are up to date.
Using Windows Live OneCare and have run complete scan: nothing found.
Using Ad Aware and have run complete scan: only found cookies and deleted them but didn’t fix issue.
Ran WinsockxpFix but that didn’t help.
Ran TweakNow RegCleaner Standard but that didn’t help.
Right-clicking the wireless icon, I try to view Available Wireless Networks. The window comes up and shows me other wireless networks in the area (2 available right now), but doesn’t show my network at all. I click “Refresh network list” and 1 or 2 of the other networks will come up, but mine is still not shown.
I’ve clicked “Repair” and get this message: “Windows could not finish repairing the problem because the following action cannot be completed: Connecting to the wireless network.”
If I go to Control Panel, there is a Wireless Configuration Utility program from Broadcom. When I open that here is what I find:
It is not managing my wireless networks.
Under the “Wireless Networks” tab I see my Network with an “X” over the router icon to the left of it and a locked security icon to the right of it.
No information under the “Link Status” or “Statistics” tabs.
The “Site Monitor” tab shows my wireless network and the other 2 networks in the area (although they drop in and out because of signal strength). My network is always present even though the signal strength bounces up and down. This tab shows that my network is secure, 802.11 is g and n, speed is 270 mbps, Channel is 9, and Signal bounces from orange/red to green. Data encryption is (m)TKIP, TKIP, WPA-PSK.
I was going to use my notebook to post this message since it has been connected for 2 days without ever losing connection. It shows Very Good signal strength and is about 3 feet away from my desktop.
Update: My desktop just connected to my network after sitting there for 2 hours. Good to Very Good signal. Broadcom tool shows the connection and now has information in the Link Status and Statistics tabs.
Cancel that. It just lost connection again. It was only connected for about 5 minutes. There is no change in signal strength according to Broadcom though. In fact, Broadcom shows better signal now that I lost connection.
Now, it just connected again (on its own) after sitting there for 10 minutes! I’ve been surfing the web on my desktop for 45 minutes now and I’m using my desktop to post this message. What the heck?!!! This is what it’s like. Aggravating huh?
Well, that’s all I can think to write. What else do you need? Can anybody help me with this?
I’m confused. Please help!
Thanks a lot!!!
Jake
Message Edited by JakeT on 03-12-2009 02:54 PM

Thanks but it's just my desktop that doesn't see it though. My notebook sees it everytime, even at the same exact time that my desktop doesn't see it. For example yesterday when I was typing up this post, I was typing up the post on my notebook because my desktop didn't see the router. I don't think it has anything to do with the router actually, but I wanted to see if anyone on here has encountered this issue before. Other forums have similar issues but I've tried all of the fixes I found elsewhere and they didn't work.
Any other ideas?
Thanks!

Why does wireless on my Time Capsule (2TB, 3rd Gen) drop the wireless network now?

Starting a couple of weeks ago, my Apple Time Capsule (2TB, 3rd Gen) has been dropping the wireless network almost daily. I end up pulling the power cord to restart it. I've had the device for what I think has to be about a year and a half already, and it's been working flawlessly until now. I have it on 802.11N (dual-band), using WPA2, with an average of about 7-8 client devices at any one time throughout our home. The problem doesn't appear to be any one client, since all lose connectivity at the very same time. The Time Capsule LED is still green when it's down, and again restarting it solves the problem. The device is out in a well ventilated area, and doesn't feel like its overheating. Devices using Ethernet to connect are unaffected (other than losing visibility to wireless network elements). It can occurn at any time, day or night, seemingly at random. The Airport Utilty advises that I have the latest firmware version (7.5.2).
Anyone have any idea whats going on? Having similar problems? Fix, workaround, suggestion?

Try setting the wireless to manual and fixed channels.. the auto channel swapping does cause issues.. I would also give different names to 2.4ghz and 5ghz so you know clearly which wireless you are connected to.
But sometimes they do just go bad.. power supply is not robust. They do become unreliable.

How do I use a wired computer on the wireless network?

I want to hardwire my desktop to my wireless router. I have a wireless adapter and my computers work fine on the wireless network. If I try to plug in the ethernet cable to the router and disable the wireless adapter, it doesn't work. The light lights up on the front of the router saying that the ethernet cable is plugged in and the 1394 network connection is enabled in the "network connections." However, I cannot ping the router when using the ethernet. On the desktop computer, I look in "view workgroup computers" and there are no computers listed there. On the back of the computer, there is a light that lights up when I insert the cable, so I know the computer has detected there is a cable plugged in there.
They way I set up my wireless network is by using XP's tool under network tasks called "set up a wireless network for a home or small office" (which is found in "My Network Places." I don't know how to combine a wireless network with a wired network. Please help me.
I am using WRT54G. We don't have broadband installed yet.

Correct…I would not mess w/ the bios. Do you have an extra cat5 cable long enough to plug into the back of your router to the back of your PC? Hopefully, it was not taken out when the wireless NIC was installed. Do you see a place to plug in the cable on the back of your PC? It looks like a phone connection jack/ modem, only bigger. If not, what kind of machine, OS (Win 2K, Win XP, etc).

Sharing files with other members of my family on the wireless network

I would like to share my files with other members of my family on the wireless network. Unfortunately, their pcs are MS Windows OS and connected in workgroup type while I am on Mac. I can access internet via the same wireless router but cannot see other members. Can someone advise How I can accomplish it. Thanks!

I don't have personal experience with this, but I was reading this article earlier today, and it seems to address your situation. I think the solution is on page 2.
http://bx.businessweek.com/microsoft-vs-apple/view?url=http%3A%2F%2Fwww.computer world.com%2Faction%2Farticle.do%3Fcommand%3DviewArticleBasic%26articleId%3D91315 58
Hope this helps.

My Epson XP - 400 will not print wirelessly or via USB. The documents just sits in the print queue while the computer is "searching for the printer". I set up the printer on the computer and it is connected to the wireless network.

I'm unable to print wirelessly or connected via USB with my Epson XP-400. The computer continues to say it's searching for the printer even though the printer is set up on the computer, the printer is connected to the wireless network and the USB is plugged into the computer.

Try resetting your Mac's printing system as shown here:
http://support.apple.com/kb/PH14141

HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

I have an airport extreme and am trying to extend the range of the wireless network with an airport express. I set it up with the help of apple support, both lights are green on both airports, but the range didn't change. What could be wrong?

I am trying to extend the range of my wireless network by adding an airport express to an airport extreme. I configured it with the help of apple support, but it hasn't changed the range that I can access the internet wirelessly in my house. What could be the problem? Does weather affect the wireless network??

So, on the Extreme you checked the box to "allow this network to be extened" ?
Correct?
And on the Express, you set it up to "Extend a wireless network" ?
Correct?
See this Apple article and see if you missed anything...
http://support.apple.com/kb/HT4145
To learn about other options for expanding your Wi-Fi base station wireless network and things you should consider before expanding your network, click here.
Set up: Components of an extended network
➊ Primary Wi-Fi base station (this is the base station connected directly to the Internet)
➋ Extended base station
Configuring a wireless extended network
To create a wireless extended network, you must place any extended Wi-Fi base stations within range of the primary Wi-Fi base station.
Start with the device that will be configured as the primary Wi-Fi base station. Then configure your extended Wi-Fi base stations, ensuring that each is within direct range of the primary Wi-Fi base station.The physical location of extended Wi-Fi base stations will vary according to the building environment and may require some experimentation.
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.

Why Can't I use BT when I am using the wireless Network?????

Why Can't I use BT when I am using the wireless Network?????
I am using airport extreme.....

In an inline renderer, the compiler knows which document will be the “outerDocument” so it sets up special code to assign that value. I think you can use parentDocument or owner.document

Disable the wireless network card upon connection.

Has anyone done the following, if so can you provide some insite on how to do it and how well it works....If wireless networking is not being used in the organization, it is possible for CSA to disable
the wireless network card when it is connected to the corporate network. I'm assuming by using the system
state variable with the rule, you can allow laptop users the ability to use wireless when they are
not connected to the corporate network.

I dont' see a system state "ethernet active" do I create this? I'm on CSA version 5.1.0.103. I have a system state called network which has the description of All users who are logged on via a network connection. Is that the same thing you mean? Then how do I create the rule? I get to where I have a NAC rule but I'm not for sure what to choose after that.

Cannot connect to the wireless networking

My Toshiba Laptop was preinstalled with Windows 7 Home premium 64-bit OS, and it had been working quite well with the wireless BB. However, the wireless internet connection was on and off within recent weeks, while the other mobile devices, such as iphone, ipad, or laptop, in my household had no such problem. The wireless signal was so strong, but the error message always said 'Windows cannot connect to the wireless networking'. It seemed there was something wrong with the wireless adapter.
I got a new TP-Link wireless adapter properly installed. Luckily, this worked; but unluckily, this worked for less than 24 hours. It was really frustrating that I, as a full-time student, depended so much on wireless networking.
Please help!!! Harry

Hi there
You may want to enlighten us with:
- What model are You using (f.ex. L300-123)
- What BIOS version is installed?
- What WLAN driver are You using?
All these questions are answered in PC Diagnostics found under Toshiba app folder in the start menu.
BR
Tom

This AirPort base station was unable to extend the wireless network.

I have an AirPort Extreme in the lounge connected to BT infinity.
I also have an airport express in the kitchen connected to a stereo system.
I have had this set up for around 12 months.
The airport express will not extend the wireless network.
I reset it, restart, factory reset etc and it will work fine for around 3 days, then I get the same error message saying
This AirPort base station was unable to extend the wireless network. Make sure the wireless network you’re trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
The express is situated easily within range of the extreme. And the airplay between those two, my iMac and two apple tv's works pretty much as it should.
Can someone please shed some light on this?
Maybe I have it in a wrong setting or summut....

G Beach wrote:
I am also experiencing a recent failure in my Airport devices no longer extending my wireless network.
My Aiport Express and second Airport Extreme were extending my wireless network for more than a year
The only change that has taken place lately is that the firmware for both devices was upgraded to 7.6.4, however the upgrade was only in response to trying to resolve this problem. Needless to say, the firmware upgrade did not resolve anything.
If I didn't know better, I'd have thought I wrote the above.
I have a TC from a few years ago (last one before the tower, I think), plus the older AEBS that it replaced extending the network, plus a 1-year-old Express also extending. I had upgraded them all to 7.6.3/4 when it came out, but reverted them all to 7.6.1 when everything went crapways (others having the same issues of the LAN regularly croaking), and didn't bother upgrading again since.
Today I just tried 7.6.4 on all of them, and it seemed OK at first with green lights all around in Airport Utility. Then I made one change, which was to enable 5Ghz on the main AEBS/TC only (the express doesn't need it, and the older AEBS can't do it).
The latter two started flasing amber and giving the "unable to extend wireless network" error message.
So I'm wondering if you are similarly using 5Ghz?

Finding the wireless network manager utility

how do i access and open the wireless network manager on my imac?

On my 10.6.8 iMac there's an inverted triangle at the top right section of the screen. Click on it, and a drop down menu will appear. Click on network preferences> a window will appear>click "Turn Airport on" and start managing. Hopefully,your Mid 2007 is similar. NOTE: These instructions are for managing the internal wi fi system within your iMac computer
Wuz

How do I fix the wireless network button on my acer 5532?

The wireless network button on my Acer Aspire 5532 has recently stopped working and I was wondering what the quickest solution was to fixing it was?

Make sure you have not set the maximum volume limit of your nano. For details, check page 25 of the manual. Cheers!

HT1595 Trying to connect my new apple tv to the wireless network. When I try to use the remote, the Apple TV doesn't respond (doesn't go to the next screen). Could this be caused by a weak wireless signal?

Trying to connect my new Apple TV to the wireless network. When I try to use the remote the Apple Tv doesn't respond ( doesn't go to the next screen). Could this be caused by a weak wireless signal?

It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

Losing the wireless network

Similar Messages

Maybe you are looking for