Lost calendar 2 years in a row

For the second year, I have lost all my calendar events. I have upgraded the OS twice. I have reset the iPad by holding the two buttons. Not sure if either of those things erased it. Very frustrating. Had important dates for events at work.

Saw another discussion and fixed the problem.

Similar Messages

Query row structure to restrict on multiple ranges of Calendar Year /Month using Custom exit

Hi All,
I have written 2 queries in Bex 7.x which have similar requirement. One uses 0CALMONTH and other 0FISCPER. I will describe scenario with Calendar Year month query.
Query to have user entry screen for 0CALMONTH. Added 0CALMONTH in Filters section and restricted on mandatory user entry variable.
Key figures restricted in four ways by creating a row structure with four selections
Current Month User entered value on selection screen (Restricted on User entry variable)
Previous Month / Period (Above value offset -1)
YTD value Range from Previous July / 07.YYYY to current user entered month value (Custom exit)
LYTD value - Above value for previous year (Above value offset -12)
For YTD value wrote a custom exit code which uses the user entry variable on 0CALMONTH to retrieve the current month value and then give output range value for YTD.
The custom exit code when debugged seems to calculate the correct range. However the query output is not working and gives out the same data for Current month and YTD range. Also LYTD value and Previous month value don't show up with any data at all.
Any tips on where we are going wrong would be helpful.
Thanks!
Custom Exit code:
WHEN 'ZGB_FP_AYTD_PTNR'.
     IF i_step EQ '2'.
       READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZFP_AYTD_PRTNR'
                                                            iobjnm = '0CALMONTH'.
       IF sy-subrc EQ 0.
         CLEAR: l_month_curr, l_month_low, l_year_curr, l_year_low,
                l_calmonth_low, l_calmonth_high.
         l_month_curr = loc_var_range-low+4(3).
         l_year_curr = loc_var_range-low+0(4).
         l_month_low = 001.
         l_year_low = l_year_curr.
         CONCATENATE l_year_low l_month_low INTO l_calmonth_low.
         CONCATENATE l_year_curr l_month_curr INTO l_calmonth_high.
         l_s_range-low = l_calmonth_low.
         l_s_range-high = l_calmonth_high.
         l_s_range-sign = 'I'.
         l_s_range-opt = 'BT'.
         APPEND l_s_range TO e_t_range.
       ENDIF.
     ENDIF.

Hi
try this code
WHEN '0CALMONTH'.
CLEAR: l_month_curr, l_month_low, l_year_curr, l_year_low,
                l_calmonth_low, l_calmonth_high.
     IF i_step EQ '2'.
loop at i_t_var_range INTO loc_var_range where vnam = 'ZFP_AYTD_PRTNR'.
         l_month_curr = loc_var_range-low+4(2).
         l_year_curr = loc_var_range-low+0(4).
         concatinate '0' l_month_curr into l_month_low.
         CONCATENATE l_year_low '001' INTO l_calmonth_low.
         CONCATENATE l_year_curr l_month_low INTO l_calmonth_high.
         l_s_range-low = l_calmonth_low.
         l_s_range-high = l_calmonth_high.
         l_s_range-sign = 'I'.
         l_s_range-opt = 'BT'.
         APPEND l_s_range TO e_t_range.
       endloop.
     ENDIF.
This code used for calculate fiscal period interval from your input month.
For Ex
user input is 05.2014
customer exit result as 001.2014 - 005.2014.
Note: Fiscal year period is Jan - Dec otherwise need to convert the input month details.
Regards
Sureshkumar

Ios 7 Calendar year view lost gradient colours

Noticed that on ios 7 the calendar year view no longer shows the gradient colours.
This was very cool feature so you could have an overview of how busy was my agenda.
Any idea if this is a setting that needs to be activated somewhere or is it totally gone?
If not year view seems pretty useless...

When you restarted the app did you quit it first?
I would first quit the app then reset the phone.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app.
Then press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

How to create offset for calendar year/month in BEx Reporting

HI ALL,
    i have a requirement of creating offset for calendar year/month.Basically i have a characteristic in Rows and volume key figure in Column and i have to put that volume under the calender year /month which is shown below ..
                         Previous Volume           Present Volume
                                 01.2010                             01.2011
material                    10000                               20000
how can i create a report for this . by using volume key figure i am creating previous volume and present volume,. how can i put them in key figure do i have to create any structure, selections for that.... and "" how can i get the present year volume and previous year volume. If i use cal year/month how can i create offset for that.....
please do let me know in brief...
Thank you.

Hi ,
I think you need data year wise .
Instead of creating a variable for calmonth and using it in the RKF , you can just drag calyear in columns and keep the Volume keyfigure below it . Keep only one keyfigure Volume and do not restrict it with calmonth or any other variable .
In this case calyear should not be present in rows or free characteristics .
You would be able to see the data year wise ..
Try this and check whether it is according to your requirement
If You need to show the data as Volume (01.2011) and Volume(01.2010)
It means you are only showing data for Jan 2011 and Jan 2010 in the report
In this case you can retrict Volume keyfigure with a variable and create a customer exit variable
for 0calmonth as an offset of -1 will bring the data of 12.2010 for Previous Volume(01.2010) key figure which is incorrect .
For your output you can create 2 customer exit variables :
One will restrict 0calmonth to current year and another to previous year .
Check whether this works .
Also , if you want to show current calendar months data , you can either use a mandatory variable on 0calmonth
and restrict the same in volume keyfigure or there are std customer exit variable provided by SAP to give current cal month .
You can restrict the char 0calmonth with this std exit variable if you do not want 0calmonth variable to be mandatory.

Help I've just lost 8 years worth of iCal data

I've just lost 8 years worth of iCal data. Does Apple still have the data? My HD died. My Mac mini will not support the new "Cloud" portal. Does anyone have any ideas how I can retrieve my data from Apple? Thanks

When you say "I can see all of my calendars", I'm assuming you mean in iCal, yes? If so, my two suggestions would be:
1) Go into Time Machine and go back to a date when you had all your calendar info, and restore the calendar from there.
Or ...
2) If you were using MobileMe, access your MobileMe account through your web browser, open the Calendar in there and see if there's any data in that calendar. If there is, you should be able to sync through Mobile Me, choosing let MobileMe overwrite the hard drive.
But I'd definitely try Time Machine first.
Good luck.

Calendar Year variable is not showing listed values

Hi,
I have a query which I am running based on the standard variable ( 0CALYEAR ) input. When I run first time it shows the list of values in the selection editor and displays the result. But after executing when I am trying to change filter values in the output, it doesn't show list values as well if I enter manually, I am not getting the result. I am getting out put no data available....
I created new variables on 0CALYEAR info object, but same problem. My query structure is
In rows I just defined Calendar Year / Month ( so that I can get all months for that user entered Year ).
In Columns I defined one Key Figure.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Mar 8, 2012 8:39 AM

Problem is resolved my self. Removed 0CALYEAR from Char Restrictions to Default.
Thanks
Ganesh Reddy.

After updating to IOS7 I have lost a years worth of pictures and my wi-fi keeps dropping out. Anyone have any suggestions?

After updating to IOS7 I have lost a years worth of pictures and my wi-fi keeps dropping out. Anyone have any similar problems or suggestions?

Re wifi:
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Re Photos:
Get them from your backup. You do backup frequently don't you?
iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Wondershare Dr.Fone for iOS
http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
iPad Data Recovery Software (PC & Mac)
http://www.anysoftwaretools.com/ipad-data-recovery.html
 Cheers, Tom

Quota credit on 1st of calendar year for existing employees and for new joinees on prorata basis

Dear All,
we are having an issue in quota generation, where casual leave quota should get credited on 1st of every calendar year and for mid month joiners on prorate basis. If we select calendar year it is crediting on 31st of calendar year, but we need it to be credited on 1st of January and also checking the prorate condition for new joiners.
So please guide on whether it is possible through standard or any work around solution. If so how can it be achieved.
Thanks
Vijaya

Hi,
check this one prorate basis -
http://scn.sap.com/docs/DOC-52928
for you quota on 1st day of calender year, check the settings in the table V_T559L
- Validity/deduction interval
- Validity period for default values
Best Regards.

Formula for calculating Quarter value in current calendar Year

Hi All,
I have a requirement where in i need to display values for Q1 of Current Calendar Year, Q1 of Previous Calendar Year,Variance in Value and % Variance in Value...Similarly for Q2,Q3,Q4.
We have built the report directly from Bex Query from the SAP tab in Crystal Reports. The formula for Quarter1,Variances etc are defined in Bex Structures and i am unable to get 'em individually here rather i am getting them as a whole in a single object with the structure name. Now is there a way that i can define my own formula in Crystal Reports so that i can get the values for the constraints defined above???
If yes please give me the syntax or an example formula so that i can work around.
please Help,
Thanks & regards,
R.N

What fields are you getting?
or what is the data you are working with is it
transID, date, value......
or is it
Q1, Year1, Value.......

Absence Quota Generation begining of Calendar Year

Hello Experts,
Although the said requirment has been already posted in SDN, could not see any solution for this from the threads.
I have a requirment to Generate Absence Quota i.e Annual Leave at the begining of the year, precisely when i run Time Evaluation on 01.01.2011 system should generate the Quota in advance for the Calenday year.
I could generate via Report RPTQTA00 but the same is not happening in TE, even i tried with all Accrual options like Calendar Year, Monthly, Payroll Period, Base Period etc but system picking only the last day of the month or year.
I am wondering if some potential solution would have released from SAP during EHP 4 and 5
Kindly help me with your expertise
thanks
Gita

Hi Vivek,
i am facing the following senio can you please provide and document with pcr. I dint find the solution in SCN so please provide solution ASAP...
I have one senario in TIme management ....
Employee have 1year probation period ,but he is entiteled for taking leave after 1 year . that to leave should be accured for calender years after probation period. & henceforth it should accur per calender year.
For Example: Employee have joined on April 2011 ,Then his leave should be accured after April2012 upto Dec 2012 & then for next year 2013 leave should accure from Jan 2013 to Dec 2013.
Please help me to map the senario with detailed configuration steps
Pls help me out here the requirement is immediate.

The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

Unfortunately, that's the way the cookie crumbles nowadays. Sir Jony Ive's GUI design for iOS7 has been met with much skepticism (to say the least). But until the company sees the compelling need for an adjustment or reversal, it "ain't happenin' ". So amble over to the feedback page ( http://www.apple.com/feedback/ ) and make your displeasure known to the company, OR make it known by not purchasing its products. Because as long as the iGadgets continue selling as fast as they can make them, they will see no need for change.
BTW, do note you are NOT talking to Apple here. This is just a user-to-user forum.
Edit: for now, you can also try out any of the alternate calendaring apps available in the App Store.

Calendar day and Calendar Year/Week mapping

Dear SDN,
I am unable to view Calendar Year/Week and Calendar Day ...Data..
I have observed that they have not mapped in the Update rules of 0SD_C03 InfoCube...
I have checked all the InfoSources (2LIS_11_VAHDR, 2LIS_11_VAITM, 2LIS_11_V_ITM, 2LIS_12_VCHDR, 2LIS_12_VCITM, 2LIS_13_VDHDR, 2LIS_13_VDITM)...
There in all the Update Rules...
Update Rules -- Details -- Time Ref.---
Time Characteristic of Fiscal Year Variant is mapped with Source fields of Fiscal Year variant
similarly,
Calendar Year/Month is mapped with Update Date Statistics
But Calendar Year/Week and Calendar Day are Blanck...
I am thinking they also should be mapped..
Please suggest me how to resolve this...
Help will be greatly appreciated with points..
Thanks in advance..
This is very urgent...

Thanks...
But i have already assigned my self...
0calyear/week to Update date statistics...
and
0calendarday to Update date statistics..
I have assigned points to you...
Thanks for your informatioon

Unable to view the Calendar Year/Month in the Query

Hi All,
We are having a standard query on Customer InfoCube 0sd_c01_q0003.
I was able to get the data. But I am unable to view the Calendar Year/month. In that place I am getting '#'.
I am able to view the details in the InfoCube. There aren't any errors while executing the error.
Regards
YJ

hi,
U r Problem is not clear...if u r getting # for characteristic values means..u don't have data in Infoprovider...try to view data in InfoProvider with the same selections that u r executing the Query with.
thnaks

Fiscal year variant is not maintained for calendar year 2009

Hi,
After upgrade to BI 7.0 we are getting error: "Fiscal year variant & is not maintained for calendar year 2009" while opening a query through Bex Analyzer.
Basically it is happening like when we open a particular query, the Variable selection screen comes up, then on clicking the exection button (after selection) it shows SYSTEM_FAILURE exception & clicking the details button, shows the message ""Fiscal year variant is not maintained for calendar year 2009"
Please provide some information/resolution to this.
Thanks,
Shantanu.

HI,
Please ensure that you have defined your fiscal year variant in OB29
correctly. It is necessary that:
1. the previous year has been maintained,
2. an entry for Dec 31 exists in each fiscal year,
3. the following fiscal year has been maintained.
Hope this helps.
Regards,
Nitin

Only activities of the current calendar year are shown in plannend act.

Hello Techies,
We are using the 2007 UI and I have the following problem. Only activities of the current calendar year are shown in plannend activities and interaction history.
SAP probably made a query only showing a set of data (current year) for performance reasons. I would like to change this in the last 6 months. My users can not see there activities of last week since it only shows 2009.
How can this be changed?
Kind regards.
Frederik

Frederik
You can control this by maintaining the view:
CRMV_ACC_1O_CUST
Or in the IMG:
CRM->Master Data->Business partner->Specify Display Options for Business Transactions
Take care,
Stephen

Selective deletion based on Calendar Year/Month in process chains

Hi all,
I have a requirement from the business wherein I have to delete the past months data before I load the same data into 6 infocubes using a process chain.
I checked the forums to understand how selective deletion is used in a process chain and I have come to know that RSDRD_DELETE_FACTS program or DELETE_FACTS Tcode can be used to generata a G* program that performs the deletion.
I am to integrate this generated program in my process chain. I have 0CALMONTH(Calendar Year/Month) as the time characteristic in all my infocubes and therefore the only time characteristic available for selective deletion.
My problem is that I am unable to create a dynamic selection for the Calendar Year/Month such that it takes the previous month.To be exact I am unable to use the "D" option in the Selection Variable column for this characteristic.
Please can somebody help me out with this.

Hi,
Use this ABAP program code in your Process Chain...
Type Pools
    TYPE-POOLS: rsdrd, rsdq, rssg.
Local Internal Tables
    DATA: lit_msg     TYPE rs_t_msg,
                lit_sel     TYPE rsdrd_thx_sel.
Local Work Area
    DATA : lwa_sel_kf1     TYPE rsdrd_sx_sel,
               lwa_range_kf1 TYPE rsdrd_s_range.
Local Constants
    CONSTANTS :    lc_i(1)      TYPE c VALUE 'I',
                             lc_x(1)      TYPE c VALUE 'X',
                             lc_eq(2)     TYPE c VALUE 'EQ',
                             lc_kf1(11)   TYPE c VALUE '0CALMONTH'.
    CONSTANTS :   lc_cube      TYPE rsddatatarget VALUE 'Z_C21'.
Delete Existing cube records
Key Field 1 (CALMONTH)
      lwa_range_kf1-sign    = lc_i.
      lwa_range_kf1-option = lc_eq.
      lwa_range_kf1-high    = space.
      lwa_range_kf1-keyfl   = lc_x.
      lwa_range_kf1-low     = <Value of CALMONTH>.
      APPEND lwa_range_kf1 TO lwa_sel_kf1-t_range.
      CLEAR lwa_range_kf1.
       lwa_sel_kf1-iobjnm = lc_kf1.
      INSERT lwa_sel_kf1 INTO TABLE lit_sel.
      CLEAR : lwa_sel_kf1.
Selective Deletion through FM
      CALL FUNCTION 'RSDRD_SEL_DELETION'
        EXPORTING
          i_datatarget      = lc_cube
          i_thx_sel         = lit_sel
          i_authority_check = space
          i_mode            = lc_c
          i_no_enqueue      = lc_x
        CHANGING
          c_t_msg           = lit_msg
        EXCEPTIONS
          x_message         = 1
          inherited_error   = 2
          invalid_type      = 3
          OTHERS            = 4.
      IF sy-subrc = 0.
        REFRESH : lit_sel[],
                  lit_msg[].
      ENDIF.
Thanks,
Saru

Lost calendar 2 years in a row

Similar Messages

Maybe you are looking for