Lost instruments after computer and GB upgrade.

Recently upgrade to a used G5 and attempted to migrate from my old G4 eMac to a 4 year old PowerMac G5. When I tried to open GB got a message that the instrument library was not valid. So, I attempted to upgrade from iLife 5 to iLife 8. Now all the instruments show up in the list, but most of them don't make any sound. Some do. I go to the App Support/GB and everything is where it's supposed to be, it just doesn't work.

Did you repair permissions? Maybe GB has problems accessing that folder.

Similar Messages

  • Upgraded both computers in the household and found Lion is too disruptive to workflow.  Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return computer and get upgraded memory to improve performance of existing MacBookPro?

    Upgraded both computers in the household and found Lion is too disruptive to workflow. 
    Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return new computer and get upgraded memory to improve performance of existing MacBookPro?  I'm mostly still happy with existing MacBookPro, but Aperture doesn't work, the computer can't handle it.
    Other possibility is setting up virtual machine with Snow Leopard server software on new computer.
    Any opinions on what would allow moving forward with the least hassle and best workflow continuity?

    hi,
    what year and specs does the MBP have

  • Opening a new window after computations and validations

    Hi all
    I want to open a new popUp window after a submit button is clicked but this window should open only after all the validations assosiated with this button are executed. Please note that, I want to open this window before the process associated with this button can fire
    Any thoughts??
    Message was edited by:
    Shantanu

    Heres what I did
    I created a process called status bar to execute on submit and after computatuions and validations. This process contained the javascript to launch my new popup. This is the first process in after submit catagory. Logically it is supposed to execute before any other process but the problem is ...
    The status bar process is not executing on submit after computations and validations.I tried changing its process point to before computations and validatuions. No problems on before computations and validations if I have some validations error on that page. But if everything is validated in this case as well, We don't get the status window.
    If this is any help, here r the contents of the process in question :
    htp.p('<script language=javascript>');
    htp.p('function statusbar(page)');
    htp.p('{');
    htp.p('url = "http://flexfareserver:7777/pls/apex/f?p=101:" + page + ":&APP_SESSION.";');
    htp.p('win = window.open(url,"","Scrollbars=0,resizable=0,width=600,height=500");');
    htp.p('}');
    htp.p('statusbar(4)');
    htp.p('</script>');
    rout(11);
    end
    Notice the last statement in the process. This is a call to an external procedure called rout. This executes fine but just the htp.p is giving me problem, only in the particular case I spotted out.
    Please help

  • After APTV and itunes upgrade on mac, streaming from itunes to Apple TV is very slow.

    After APTV and itunes upgrade on mac to latest on 02/15, streaming from itunes to Apple TV is very slow. even 5 mins song takes 10-15 mins to start. Netflix/Youtube work fine on Apple TV. restarted Mac, router, modem, appletv. reset Appletv to factory setting and re-start.

    Apple TV 2 does not appear in iTunes (exception being when connected via micro-usb for restore) as it has no sync capabilities.
    See if this helps
    http://support.apple.com/kb/TS2845

  • Iphoto will not launch after lion and iPhoto upgrade

    "your iPhoto library is either in use by another application or has become unreadable
    Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
    This is the message i get after paying apple3 0 dollars for the lion upgrade and 14.99 iphoto upgrade. Can you now help fix?? you have my money. Now give me back my computer

    Do as the instructions tell you.
    Hold down the Option and Command keys and launch iPhoto at the same time.
    You'll see a dialog box open.
    Select:   Repair Database
    Or, restore from a backup.
    FYI, Apple's policy states that, "all sales are final" >  iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS

  • Thinking about new computer and Adobe upgrades

    Hi,
    I'm contemplating a new computer and upgrading InDesign. I bought Photoshop cs3 to replace 7.01 but it was crash prone and cumbersome so I removed it from my computer and went back to 7.01 (never crashes - has never crashed).
    I use OS 10.4.11 on the old non intel mac. If I get a new intel mac with 10.5 I will need to upgrade from ID2.
    Is it possible to load the latest versions of ID and Illustrator without the bridge?
    and
    What is your favorite imposition software that works well with ID4?
    Garrett

    Thanks Eric,
    Your idea is the surprising kind of reason I would like to upgrade to a newer machine than a g4 with os 10.4.11. And I totally agree that auto update is a real drag if you don't want it, that's partly why I unloaded photoshop cs3 and stuck with 7.01, and now gimp. Still, there is no way to replace indesign or illustrator, they are the best.
    I avoided cs3 because of all the controversy around command z doing weird stuff and I'm hoping things get back to normal on that score with cs4.
    Yes, the ability to install the exact functionality one wants rather than bloated-evolutionary-drift-to-complexity is the vector to sustainability on all intellectual vectors.
    Tim, you are working in a way that bridge helps, a few of us are more sedate and struggle with a story that builds around limited or no graphic selections, from this perspective, bridge is a bother when it suddenly starts up. It would be nice to be able to take or leave it, rather than be forced to accept what is an added function that may be the cause of crashing.
    Cordially,
    Garrett

  • Step by step computer and software upgrade, please?

    I will be upgrading my hardware and my software within the next couple of months. I currently use PSE 3.0 on my Windows XP computer and I regularly save a backup of my Organizer (throught the backup function) on an external hard drive. I plan on upgrading to Vista and to PSE 5.0. Could you please direct me or give me dummy proof step by step instructions for the migration. The old computer will stay in the family and I will not need to delete or move anything from it. Please advise. Will PSE 5.0 do a reconnect with the 3.0 backup? All the photos are in the same single place.

    You should be able to install PSE 5 - apply the 5.0.2 update - and restore your catalog. If you run into problems, here's the place to ask for help.

  • Recovery of lost printers after Archive and Install

    Hi,
    I just finished an Archive and Install of Leopard, and I discovered that one of the side-effects of doing this is that my printers are all gone. I sort of expected this, and I have a full system backup of the system I rebuilt, so if all else fails, I can boot off the backup, and print or take notes on the printer settings, and then go back to my active installation of Leopard and re-enter them all. But I'm wondering if there's an easier way. Would anyone know if all of the printer info might be contained in a few discrete sections of the "Previous System" folder that I could just drag into the current system folder to get all of my printers back? I do consulting work at a number of companies, so I have about ten printers that I routinely print to, so it's a bit of a bother to rebuild the list by hand.
    Thanks,
    Ken

    Usually, when no additional printer software had been installed into the Mac
    (assuming the printers are among the many supported printers already in it)
    all you'd have to do in order to use one of those attached or available printers
    would be to have them turned on and attached to the computer or the network
    they'd normally be accessed through. Unless they require newer driver software.
    At times, the choices of available printers would appear in the print setup in an
    open application; at others, you may have to go into the setup utility to see if
    the printers could be added to the list - pulling drivers from the installed OS X
    and putting them into a position to be used, if compatible with the printers there.
    The system's installer and updated files available to it include many drivers,
    and these are not all turned on by default.
    So, if there is no chance of the printers being recognized by the OS X version
    you have (assuming archive & install and update) even after being given any
    new drivers available through Software Update, you may have to seek out the
    latest drivers from the printer manufacturers web site downloads pages.
    There may be some other way to make the printers work through the OS; if
    they otherwise should appear and be available. Some of the printer setups
    & CUPS printing options or settings should be explored if they haven't been.
    Although I don't have OS X 10.5.x running in my computers now, I have tried
    it and decided to stay awhile longer in 10.4.11; some of the same kinds of
    issues can occur, between these slightly different systems. You may be able
    to re-use the printer drivers from the Previous System, unless their installer
    had an instruction set to put various parts for the printer software in different
    locations, in which case, the drag-n-drop may not be suitable to reinstall them.
    Hopefully someone with more restore experience (short of manually reinstalling
    drivers, if these are not already a part of the OSX and its 10.5 install/updates)
    will contribute a bit more and direct you as per the specific demands of Leopard.
    PS:
    When you get your system back in order, you may wish to consider making a
    full computer drive clone on an externally enclosed FireWire drive unit capable
    of booting Mac OS X and running your PPC-based Mac (and also Intel-based)
    so that unit may be something in the way of a FW400/800 + USB2.0 drive with
    its own AC power adapter. OWC sells a mercury drive enclosure with HDD in it.
    That may be a way to avoid doing Archive & Installs + updates; just restore from
    a full drive clone and be on your way. And do other backups if needed, too.
    Good luck & happy computing!
    { edited 2x }

  • 3 Beep when i try to boot Snow Leopard (after memory and sad upgrade)

    Good night,
    I have a Macbook Pro Later 2011 with Yosemite installed and today i tried to upgrade memory and SSD.
    Memory: 16GB 1600MHz DDR3 (2x8) Corsair 11-11-11-30 1.35v
    SSD: Corsair 120GB Sata 3 Force GT
    After installation of my new gear, i tried to install OS X Snow Leopard through DVD and i get this 3 beep when boot start.
    So i reinstalled the original hard drive, keep the new 16gb and started correctly.
    Tried boot DVD again with the original hard drive and new 16gb but the 3 beep continues...
    Then i removed the 16gb, but still doing this 3 beep stuff when i try boot from DVD.
    I tried all combinations with new and old hardware but nothing more works...
    I have changed the slots with both, the 16gb and old 4gb.
    Could be the DVD corrupted?
    Now im running my Yosemite with the original hard drive and the new 16gb memory without any issue.
    Im already do the memory test nothing wrong appear in results
    My configuration:
    MacBook Pro (17 polegadas, Final de 2011)
    Processador 2,4 GHz Omte; Cpre i7
    Memória 16 GB 1600 MHz DDR3
    Gráficos Intel HD Graphics 3000 512 MB
    Could anyone help me plz?
    ps. sorry for my english

    The DVD's too old for that Mac. If you need to install an OS on it, connect it to the Internet and start it up with the Option, Command, and R keys held down.
    (110037)

  • Activation issues after restore and OS upgrade

    IPAD was disabled. Only option I had was restore. After restore, it offered to upgrade the OS which I accepted. Now, Activating IPAD requires my apple id which is ******@icloud.com. I don't even remember creating any account on icloud.com. I have tried to retrieve it unsuccessfully from Forgot Apple ID link. Any suggestions? workarounds? Many Thanks in advance.

    You will not be able to re-activate your iPad if you do not remember the old Apple ID and Password.
    This is the new security feature of IOS 7.

  • Computer and Software Upgrade Dilemma

    I recently bought a MacBook Pro with Leopard. All works fine and I'm happy. I hope to use photoshop cs3 Extended extensively.
    My old computer was/is running Photoshop CS. I want to upgrade to CS3 Extended.
    Question: Do I need to purchase a whole new version of Photoshop if I'm installing app onto a new Leopard OS-based computer?
    Thanks, in advance. It's $650+ for a complete version and about $199 for an upgrade. I like the second price best.

    The license is for one user and two computers that cannot be used at the same tine, e.g. a laptop and a desktop computer

  • Lost Password After 10.4.5 Upgrade? Do This:

    If the password you've been using for the past, oh, five years or so suddenly doesn't work after upgrading to 10.4.5, as it happened to me and a lot of other people, do this:
    Boot up with the Tiger installation disk. Under Utilities, click on Reset Password, type in your original password (or a new one if you want) and restart.

    I rebooted my Mac after coming up to the login screen (that refused my password) and it seems to work fine after that.
    I also tried to SSH in remotely and I have a feeling there was a slight issue with PAM (or the Mac equiv) as my Mac has my SSH keys on it and they weren't working (asked me for a password which would point to something else being wrong.)
    I think the secondary boot fixes this problem more than the password change with the Install media does.
    Sam

  • Zen Xtra 40G - PC Not Recognizing Unit after Firmware and Driver upgrade

    I own a Zen Xtra 40G unit and have just recently upgraded the firmware to the latest version (.20.08). I then proceeded to upgrade to the latest Windows XP driver (.26.02) and after reboot, the system no longer recognized my jukebox.
    I tried my room mates, still on an older version of the firmware, and his worked without a problem.
    In order to check and see if it was a one time fluke, I uninstalled both the driver and Creative MediaSource and re-installed from the original CD.
    Again, my jukebox (still with the new firmware) worked flawlessly. I then upgraded Media Source to the latest version (2.03.09) and rebooted only to find my jukebox still worked perfectly.
    I then downloaded and installed the latest Windows driver again (.26.02) and rebooted. My PC stopped recognizing my jukebox again but my buddie's still worked without a problem.
    Is there a known flaw with the Windows driver and the latest firmware version.
    Could Creative fix the problem or let me know if there is a setting I need to change in order for my PC to recognize my jukebox under the latest software and drivers?

    So am I to assume from that message you think I should revert back to the old driver?
    Of course Technical Support was no help. Sometimes I think they either a) don't read English very well or b) don't read the entire e-mail.
    Here's what they wrote:
    <EM>With regards to the issue you are having, may I enquire on the programwhich you used after applying the Windows update that informed you thatthe player is not connected. In the meantime, please try downloading these two files and see if ithelps:Below is the link for the latest drivers/applications updates.</EM><A href="]<EM>http://us.creative.com/support/downloads/</EM>[/url]<EM>Select MP3 Players -> Zen -> Zen XtraSelect Windows XPThe files are Creative MediaSource Software Update version 2.03.29 (39.46 MB)Filename: CMS_PCAPP_LB_2_03_29.exeThis software update allows you to manage your Creative NOMAD? playerwith the latest version of Creative MediaSource?, an advancedfull-featured media player.2) NOMAD JukeBox Type 2 Version .0.03 (English) Web Release (7.70 MB)Filename: JBTII_PCAPP_LB__0_03.exeThis software update is for Creative Zen and Creative NOMAD? Jukeboxowners who have installed Creative MediaSource? (version .00.54 orlater) on their computers.Please email us if you have any further questions or comments. Thankyou.For faster service please reply with previous correspondence whenreplying to this email.</EM>
    Had they read my e-mail, they wouldn't have pointed my to software I had already DOWNLOADED and INSTALLED!!! Oh well... we'll see what tomorrow's answer brings.

  • ITouch stuck in recovery mode after iTunes and firmware upgrades

    my iTouch has hung in recovery mode and will not restore after I updated to iTunes 7.7.1.11 and tried to update the firmware suggested on iTunes Summary screen after launching the new iTunes. The firmware I was at was 1.1.4 and iTunes was offering the update to 1.1.5. Now the iTouch is stuck.
    i have tried the restore function, removed/reinstalled all Apple software, the iTouch resetting procedure (hold power & home buttons together), NOTHING WORKS.
    HELP
    Thanks,
    nitefisher

    I am having problems similar to this. After the ITUNES 7.7.1 upgrade and the ITOUCH 2.0.1 upgrade, ITUNES thinks the ITOUCH is is recovery mode and it must be restored. If you use the ITOUCH it works fine. I have recovered at least 10 times over the last 2 days. The ITUNES syncs sometimes and says restore is necessary sometimes. Various other errors pop up too. "The Ipod could not be restored. An unknown error occurred(6)" is just one of the errors. I wish I could back out the software because the hardware is fine. I suspect bugs in ITUNES. It's bad enough you have to pay for the ITOUCH upgrades but they have errors in them too. I've read numerous variations of this in the last 7 days with no clear fixes. Even the problems I am having are not consistant. If anyone has a clue let me know. Thanks.

  • If I have Microsoft Office installed on my computer and I upgrade the OS, will I lose that program?

    I downloaded Office using an internet purchase through school and am not sure if I have the capabilities to log back in to download it since I graduated.  I want to upgrade to the new operating system, but do not want to have to purchase Office again. Thank you!

    You should not lose the program, but make sure you have the installation code as you may have to re-enter it to activate Office after the upgrade.

Maybe you are looking for