Lost of profit center with posting Bill of exchange

Dear all,
When we are posting bill of exchange a new document is created with a default profit center, is this case we losing the offsetting profit center of the original document..
is there any solution to avoid this problem ??
Thanks in advance
MN

If document split active and real time integration between fi and co active, then you can do profit center reposting through KB61.
based on the CO entry system will create FI entry automatically for the adjustment.
e.g.
GL account 1Dr 200(PC-1)
GL account 1Cr 200(PC-2)
Rgds
Murali. N

Similar Messages

How to update profit center in posted document without profit center ?

HI,
I want to know,
How to update profit center in posted document without profit center ?
So that i can get my profit center accouting report proper.
Thanks
Nilesh

There is a long story about profit center accounting. I assume you are using Classic PCA, this means you can see the PCA documents. And the solutions is below:
For P/L account, even you don't maintain cost element for it, if you maintain the profit center in the application (Frontend transaction), then PCA line items will be generated for this account.
For B/S account, if you maintain the default Profit Center with transaction 3KEH/3KEI, the PCA line items will generated for this account also.
Hints, don't maintain default profit center for AR/AP accounts, these accounts to be treated in periodic processing.
First, calculate the distribution/adjust by F.5D, then transfer it by 1KEK. for others account rather than AR/AP, use F.5E
For you case, if this account is P/L account, but you don't maintain profit center in the transaction, you can maintain default profit center as B/S account in 3KEH and 3KEI, then transfer it subsequently by transaction 1KE8.
Good Lucky!
Flex Yang

Distribution of Profit Center with JV Documents.

The new GL Profit Center distribution cycle does not create JV Document. Requirement is to distribute Profit Center with JV Documents.
Need to distribute Revenue booked under different profit centers based on the percentage. The combination for distribution can be Co. Code, Posting Period, Fiscal Year, G/L Account and Profit Center. Want to post documents for each line item posted. While running Profit Center distribution cycle, cycle should take the same amount which was posted while generating Sales Invoice.
How this can be resolved.
Thanks
anya

Hi,
Instead of editing the cycles every now and then, better to have ratios by way of SKF. Pl elaborate the ratios, we can suggest how to capture it in SKF.
Trust this helps much!
Cheers!

** Balance sheet at Profit center with Inventory valuation at CoCd level **

Scenario:
Inventory valuation is at CoCd level. Moving Average costing.
There are 2 plants in CoCd 3000.
1.     I created material 1234 in plant P1 (profit ctr P1) & in plant P2 (profit ctr P2)
2.     Then, I received a PO - $1000 (100 qty @ $10) in plant P1 & $1100 (100 qty @ $11) in plant P2
3.     So the Moving average at CoCd is $10.50
4.     I created a Sales order to ship out 100 qty from plant P1. The PGI posted at moving average at CoCd level i.e.
        Dr COGS $1050
        Cr Inventory $1050
5.     Now, Inventory GL account value becomes -ve 50 at plant P1
6.     MB52 looks wrong as below. It doesnu2019t show -50 in P1 & 1100 in P2
Question:
Is there any standard way to accomplish Balance sheets at Profit center with Inventory valuation at CoCd level?
- We can do custom development to distribute Inventory balance on profit centers upon receipts or Invoice receipts (i.e. anything that updates the Moving Avg at CoCd) eg in step 2, when $1100 (100 qty @ $11) in plant P2 is received, then post +500 to inventory in P1 & -500 in P2, to make both P1 & P2 at 1050.
However, this would be huge effort on Development, Testing & ongoing maintenance.
- Another custom way would be to post to Profit centers a periodic entry to correct Inventory balance to (Qty on hand x Moving Avg at CoCd)
Please let me know your thoughts. Thanks.

Hi,
I don't think so it's happen at valuation at Company code level.
Inventory Valuation always at plant level only not at Profit center and company code level.
In your case 2 Plants and 2 Profit centers. There is no chance to different the value at Profit center . Check once in Dev. server with example.
Regards,
Kishroe

Profit center is posted to asset account??

Hello experts,
I wonder it is correct that profit center is posted to asset account.
Now our B1 2005B does that.
For example,
In AR credit memo (or Sales return) , we input profit center XX into the documents.
Then B1 create Journal Entry as below;
Dr
Sales Revenue 100 , profit center XX
Inventory 50, profit center XX
Cr
AR 100,
Cost of Goods Sold 50, profit center XX
Inventory account is asset account, so I'd like to know this is correct and SAP's spec ? or SAP's bug?
Please give your advise,
Kaori

Hi Kaori,
The functionality is slightly different in the B version so I can tell you how it working in the A version and maybe you can verify this.
The Profit Center should only be allocated to accounts that has been defined as Account type 'Sales' or 'Expenditure'. If the Inventory account is given this definition it will allocate the profit center to the inventory as well.
Normally by default P&L account are set as 'Sales' or 'Expenditure' and Balance Sheet accounts set as Account type 'Other'.
Hope it helps.
Jesper

Substituion of profit center while posting to internal orders

Dear experts
Can anyone guide me to substitute a different profit center while posting to a real internal order.
I tried substitution rules, user exits, etc. Eventhough the control goes there, substituion is ineffective since profit center assigned to the internal order in its master data is getting replaced again.
Any other work around is possible to achieve this.
Thanks

Find below your clarification for the points
Why we assign cost center while posting to any G/L, even though we have been assign cost center to the cost element it will post the co entry through cost element.: Once you have assigned cost center to cost element in T.code OKB9 or KA01, no need of manually entering the cost center for the respecting primary cost GL while passing enteris.
Please any one make me understand the internal logic and process of how cost element and cost center works.: Whenever you post a cost to primary cost element , you require an object in Controlling , such as cost center to identify the costs. This primary costs are only created when the respective GL exist in the operational chart. Cost center is the location where cost incurs. Thus when you assign the cost to cost center , the cost will be booked against that particular location .

Access Profit Center with DI

Hi all,
It is possible to create or update Profit Center with the DI API in SAP B1 2005 or 2007 ?
Thanks for your responses.
Regards,
Michael

Hi Michael,
CostingCode is the attribute for Profit Center. The following code snippet might be some help:
SAPbobsCOM.Documents delivery = (SAPbobsCOM.Documents)GlobalSAP.oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes);
delivery.Lines.CostingCode = ProfitCenter; // Profit Center Can be select via select PrcCode, PrcName from OPRC;

FGI0 - FGI5 Issues with Some Profit Center with Line Items

Hi Experts,
I am running with some issue, not sure if im missing something. I have created a report form thru FGI4 (with FAGLFLEXT), i have two line items which are related to expenses which are going to cost center and another line item which are related to revenue which is goint to PA segment. In expense line items i just added two characteristics one is chart of accounts and another one is account group for revenue items i have added chart of accounts, account group, profit center group and CO area. later i created a report thru this form and executed, i dont get any values for expense line items, where as for revenue i get the values, i dont why.
If i remove the profit center group in revenue line items, i get value for both expense and revenue. and i tried this option adding all profit center group for expense line items, then i get nothing for both exp and revenue.
The reason for having profit center group in line items, is to show reveneue from different profit centers.
I dont know what i am messing up, can anybody help me out please
Best Regards
gj

Dear Mr Saurab
Thanks for nice reply . As suggested I passed entry using Tcode 9KE0 and incorporated the Profit Center correction .The document also got posted as type A0 .
However when we are taking the report for the reference GL & Profit-Center using Tcode S_ALR_86000030 , there is no change in the figure . The figure remain same as appeared before posting of Document using Tcode 9KE0 .
Kindly guide us on the above please .
Regards
B Mittal

Profit center with AUC

Hi Gurus.
1) What is the linkage between Profit centre and AUC with respect to WBS element?
Example: If I activated AUC then the respective WBS element is not taking Profit center automatically/Manually??(In the case of Invoice doc. creation the error is like --"Balancing field "Segment" in line item 001 is not filled"?
2) What is the document splitting? How can we know the functionality of splitting ?can any one tell me about the topic or send me some supporting docs to sanjaykumar.ps at gmail dot com
Thanks in advance,
Sanju...

Dear
you need to use automatci assignments. Use ACSET and in that for Ord Dper and APC give * for all transaction types and select dep run. Here you need to give COst center.
In Auc youi might have suppressed the Cost center in time dependent data. You make it optional or mandatory. The link is in Asset Master in time dependent data you have teh project assignment.
On Doucment splitting
You can use the document splitting procedure to split up line items for selected dimensions (such as receivable lines by profit center) or to effect a zero balance setting in the document for selected dimensions (such as segment). This generates additional clearing lines in the document. Using the document splitting procedure is the prerequisite for as well as an essential tool for drawing up complete financial statements for the selected dimensions at any time.
You can choose between displaying the document with the generated clearing lines either in its original form in the entry view or from the perspective of a ledger in the general ledger view.
For document splitting to be possible, the individual document items and the documents must be classified. Each classification corresponds to a rule in which it is specified how document splitting is to occur and for which line items.
SAP delivers a set of standard rules that should usually prove sufficient. If not, you can define your own set of rules and adapt these according to your needs.
Example
Example 1: Invoice
Suppose a vendor invoice containing the following items is entered:
Posting Key Account Segment Amount
31 Payables -100
40 Expense 0001    40
40 Expense 0002   60
Document splitting then creates the following document in the General Ledger view:
Posting Key Account Segment Amount
31 Payables 0001   -40
31 Payables 0002   -60
40 Expense 0001   40
40 Expense 0002   60
Example 2: Payment
The payment for the above vendor invoice then contains the following items when entered:
Posting Key Account Segment Amount
50 Bank -95
25 Payables   100
50 Cash Discount Received -5
Document splitting then creates the following document in the General Ledger view:
Posting Key Account Segment Amount
50 Bank 0001   -38
50 Bank 0002   -57
25 Payables 0001   40
25 Payables 0002   60
50 Cash Discount Received 0001     -2
50 Cash Discount Received 0002     -3
And don't request the users with personal IDs as moderator will lock the thread and even though you give me points he will withdraw at a later date.
You need to search the forum first.
Reward if useful
sarma

Repost between profit center with new GL

Hi,
We had the wrong profit center assigned to one of our cost center. now, we corrected the assignment, but we need to move the posting from the 'wrong' PC to the 'right' PC for previous months.
Except for a regular journal entry to reclassify between the two profit centers, is there a better way to move or repost the line items?
Thanks,
Yoel.

Hi,
if you are able to assign (temporarily) the old wrong Profit Center to this cost center:
1: credit the cost center with old profit center for all the postings to be corrected, debit a CO-object assigned to any other PC (or even dummy PC).
2: change the PC in the cost center to the new one
3: credit the temporary used CO-object and debit again the cost center with the new profit center.
4:post it periodically, the balance of the intermediate object must be zero for all periods.
The cost appear on the cost center assigned to the new profit center.
Sounds painfull...
Best regards, Christian

Default profit center when posting vendor invoices thru MIRO, FB60 and FB65

Hi,
My requirement is to default profit center at item level while posting vendor invoices using transactions MIRO, FB60 and FB65.
can anyone please provide some inputs on this.
Thanks for your help.
Lucky

Hi,you need to customize doc splitting.
1.You need to clasify all accounts from future document in Document Splitting-Classify G/L Accounts for Document Splitting(e.g. all accounts 2000) 03000-VENDOR.
2.in IMG: Classify Document Types for Document Splitting check for Document type transaction and Variant (e.g. Doc=KR, Trans.=1010, Variant= 0001)
3.In IMG: Activate Document Splitting check assigned method(e.g. 000012)
4. in IMG- Document Splitting-Extended Document Splitting-Define Document Splitting Rule
For find your method and transaction(e.g. Method=00012, trans.=1010) and double click on Item categories(on left of the top of screen)
There'd be record with category from first step (e.g. Cat.=0300), select one and double click on Base item cat. - there'd be Category 0300 and with check box Automatically split.
I hope it'd be helpful

Avoiding DUMMY value for profit center while posting COPA document

Hi All,
I have a requirement where I post a document using BAPI_COPAACTUALS_POSTCOSTDATA using a Z Program.
Everything works fine , but if we do not mention the profit center explicitly, it takes the value as "DUMMY". Same happens with KE21N.
I want to find a user exit where I can change this dummy value to blank again. I do not want posts with DUMMY profit center values.
Can you please suggest where can add my custom code. I think this should happen just before the document is posted.
Kindly suggest where should I add my code.
Regards,
Barkha

Hi Gangadhar,
Thanks for the input.
But for now our requirement is still the same.
So what can be the other way round for this?
Anyone, any more inputs pls.

Issue in Profit Center genereated during billing

Dear Friends,
When billing document is done and in accounting document system is picking wrong profit center.
The flow is ( Sales Contract (profit Center - 600000 in line item of materila) --> sales order ( profit center 600000 in item level) --> PO --> Billing document --> (Profit Center - 900000)
Kindly advice user wants 600000 to be picked insted of 900000.
Regards.

Hi,
Check in 3KEH or FAGL3KEH, if some P.Cntr assignment is maintained..
Also let us know, whether 900000 is a Dummy profit center?
Regards,
SAPFICO

Relation Between Dummy Profit Center and Posting Keys.

Hello Gurus,
It will be a valuable feed back for below mentioned Scenario.
One of our client is on SAP Version 4.7 and New GL is not activated. In COCD one Customer Invoice entry is booked as below.
PK     Account           Amount      Profit Center
01     SURXXX1            100.00         ABCD
50     REVENUE A/c      50.00         ABCD
50     ENT TAX               20.00         ABCD
50     SERVICE TAX       30.00         ABCD
After running t codes 1KEK, F.5D, and KE5T for customer line item system picks same profit center as mentioned in other line items i.e ABCD.
But when we reverse the above document system picks DUMMY Profit center instead of ABCD.
PK     Account           Amount      Profit Center
12     SURXXX1            100.00         DUMMY
40     REVENUE A/c      50.00         ABCD
40     ENT TAX               20.00         ABCD
40     SERVICE TAX       30.00         ABCD
Basically we have checked field status variant for Posting Key 01 and 12 in which Profit Center field is Required and field status for profit center for reconciliation account is also required. This is unusual behavior which we are facing right now.
Regards,
Ajinkya Ahire

Profit Center :
A profit center is a management-oriented organizational unit used for internal controlling purposes. Dividing your company up into profit centers allows you to analyze areas of responsibility and to delegate responsibility to decentralized units, thus treating them as "companies within the company". EC-PCA lets you set up your profit centers according to product (product lines, divisions), geographical areas (regions, offices or production sites) or function (production, sales).
Profit Center Accounting (PCA) allows you to calculate internal measurements of profitability. This internal view of profitability, then, reflects the success of a given profit center at meeting the profitability goal for which it was given responsibility.
Cost Center :
The cost center is an organizational unit in a controlling area. Cost centers can be defined according to several different design approaches. A typical approach could be for an enterprise to define a cost center for each low-level organizational unit that has responsibility for managing costs. As costs are incurred, they are assigned or posted to the appropriate cost center. These costs could include payroll costs, rent and utility costs, or any other costs assignable to a given cost center.
Each cost center is assigned to a category, e.g. Administration cost center, production cost center, etc. Each cost center master record has a field for the name of the person responsible for the cost center.
For detailed information go thru the below article
https://wiki.sdn.sap.com/wiki/display/ERPFI/BasicConceptsof+Controlling
Hope this helps.
Cheers,
Srinath.

How to undefined generated Profit Center in SAP Billing

Hi Expert,
Is it possible to undefined and not generated profit center in Billing Document? Cause I'm not set Profit and Loss G/L account (I'am setting Balance Sheet G/L Account)
In Sales Order we didn't input WBS Element, Internal Order, and Profit Center.
We can create Billing Document, but can't release billing document.
Need your response.
Thanks and Regards,

For this problem I'am create substitution and create profit center dummy..
Thx

Lost of profit center with posting Bill of exchange

Similar Messages

Maybe you are looking for