Lost video file from a flash drive using iMac

I played a video file that was saved on a flash drive on my iMac. After the video played, it was automatically deleted from the flash drive. I did not physically delete the file. When I closed the file, it simply vanished. Is there anyway to recover the file?

Thanks for your response. I didn't notice the file in the trash after this occurred. If it was there, it is long gone by now anyway since I've emptied the trash several times since the incident (unless someone has an answer for recovering files that have been deleted from trash?). If it happens again, I'll pay closer attention to what is in the trash and see if this works. Thanks again.

Similar Messages

How do I transfer files from a flash drive to iMac. I get a folder with "no name" which I can live with but I can't find any way to make the actual physical transfer of the files to the iMac.

How do I transfer files from a flash drive to my new iMac? I get a folder with "no name" that I can live with but I can't find a way to transfer the flass drive files to to iMac hard drive.

What happens when you try to drag & drop the files?
~Lyssa

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; I also have Microsoft Word installed on the Mac as well.

How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

How do I import music files from a flash drive to my iTunes library on my laptop

How can I import music files from a flash drive to my iTunes library? I put the flash drive into my laptop, selected " add file to library", selected the songs I wanted from the flash drive, and it looked like they were added as the names show under " recently added". Then I removed the flash drive from my laptop But when I select one of the songs and try to play it a message saying "the song could not be used because the original file could not be found. Would you like to locate it?" So it seems the actual files did not transfer. What do I do? I have done this. With a cd in the past with nsomproble,.

Suncadia wrote:
Thank you!! This worked. It does seem there should be an easier way but this did work.
Dragging the files to "Automatically Add..." is pretty easy once you know where to look. Just make sure iTunes is running when you do it; otherwise the files will just sit there until the next time you open iTunes.
(Interestingly, the way you originally tried to do would have worked fine except for one little detail: you have to first go into Edit > Preferences > Advanced, and check the box for "Copy files..." If that is not done, iTunes will reference the files on the flash drive, which of course are not accessible once the drive is removed, as you saw.)
Anyway, glad that all is now sorted. Enjoy the music!

Toshiba 40SL733g - How to play video files from USB flash memory

When I plug my USB flash memory in USB port, Media Player menu shows up with two options : Photos and Settings.
How do I make my TV recognize and play video files from USB flash memory?
Flash is on FAT32.
I have tried to play avi, mp4 and mkv files but nothing happens. It looks like flash is empty.
Could you please help me solve this problem.
Thanks!

bzunic, have you updated the firmware for your model?.
With my own set, (32RL900A), the instruction manual said that certain buttons on the remote control were "unused", however, after the first firmware update, the previously "unused" buttons were used, (In our case, Time Shift, Record, and so on).
The reason I talk about this is, these features became available after a firmware upgrade, and were not mentioned in the user manual, in our case, and a later download of the instruction manual for our model actually gave the instructions for the use of these features, which were shown as "not available", in the original instruction manual supplied with the TV, but became available after the firmware upgrade.
Let us know how it all works out ............
donhe7

How do I transfer files from a flash drive to my iPad? Do I need an adapter?

How do I transfer data from a flash drive to my iPad 2? Do I have to have an adapter or special device to do this?

You can use the camera connection kit to plug in a flash drive. But there are a lot of 'buts'.
First, most flash drives will trigger a 'device requires too much power' warning and will not work. (I had a 50/50 success rate)
Second, the iPad will only import properly named photo and video files. You cannot transfer music or documents.
Third, there is zero support for the export of files.
You can look into wireless flash drives. The Kingston WiDrive is just one example. They generate a localized wifi hotspot that you can connect your iPad to and then use an app to transfer files.

ITunes 11 won't import .mov video files from external hard drive but will from internal.

Hi Everyone
I'm having a problem with iTunes 11.0.1. I can't import .mov video files stored on an external hard drive. I can however import .m4v files from the same external drive. Using either the add to library option or dragging files from the finder.
I can add .mov files from the internal though. Strange I know.
The reason behind this posting is that I'm using iFlicks to convert my TV and movies from my external drive for Apple TV and add all relevent meta data, keeping the files on the external drive and having iTunes link to them.
I would like to be able to simply create a general iTune compatiable file using iFlicks which only takes a minute or two per file to convert. I'm currently converting them to .m4v just for the sack of being able to import them into iTunes from an external drive takes 45 minutes per file.
Has anybody else had this problem? Any ideas on a fix to allow me to import .mov files from an external drive into iTunes without copying it to the iTune library file.
Many Thanks
Dave

This might be worth a shot - basically seeing if Vista permissions could be the culprit.
Give yourself FULL control and ownership of the exHD, let's call it M:
How to Take Ownership and Grant Permissions in Windows Vista
Take control of the top level folder and ALL subfolders.
Try creating a new blank ITL file on M: by pressing *and holding* the shift key while itunes starts. See if you can add everything again.

How do I copy a file from a flash drive to my iMac

I am trying to import my contacts from my old PC to my new iMac. I had all my files transfered by an Apple store tech. My contacts went to my Address Book. Which is fine, but I now want to import them into Office for iMac 2011 Outlook. So I exported them out of Outlook 2007 for Windows into a file on a flash drive. I am now trying to import them from the flash drive into Outlook on my iMac. I can't figure out how to find the flash drive on the iMac to import the file. HELP!!!

By default, all drives are hidden from the desktop. Pretty dumb in my opinion, but that's the default.
From the desktop, choose Finder > Preferences. Turn on the check boxes for all drive types you want to always appear on the desktop.

How can I move a large video file from my iphone ... iMac / PC

I have a large iPhone Video File that I cannot transfer from my iphone to my flashdrive as it is too big.
I realize that I can reformat an empty flash drive using Disk Utilities and I should then be able to transfer the file.
My question: What do I select when reformating the flash drive so that it will be accepted by both a PC and an iMac?

ExFAT would be the best file system format, as it will handle files greater than 4GB.
If exFAT is not available, go for FAT32.
Just FAT is too limiting, so avoid that

Copying video files from one external drive to another

Hello! I am very new to Apple and FCP, so please forgive my ignorance. I have looked through the other topics and have not found one that addresses my question, so please forgive me if this has been addressed in the past.
I am working on a project and have all of my video clips saved to a G-Tech G-Raid 320 GB extenal hard drive. I captured much of my footage using "capture now" instead of logging individual clips for various reasons (i.e.: some tape sources did not have timecode), so if I ever have a problem, simply recapturing the footage does not appear to me to be a valid option.
With this weighing heavily on my mind, I thought it would be best to copy the poject to a second G-RAID external hard drive.
However, the G-RAID uses an 800 firewire and my G5 computer only has one such port.
What would be the best way to copy from the one external drive to the other? Will I have to copy the files to my internal hard drive first? And if so, how do I do that? Thanks!!

Crystal,
Please reply to a specific post, not to your orignial one. This keeps the threaded discussion in order.
To see the format for a drive. Open Disk Utility. It is located in your /Applications/Utilities folder.
You should see all your connected drives on the left side of the window. Click on the icon of the drive you want information on. Select the Volume icon, not the Drive icon ( the volume icon is the one under and slightly indented to the right of the drive icon)
Look at the bottom of the window. You'll see an item FORMAT: it should say Mac OS Extended. If it says MS-DOS, you'll need to ERASE the disk. When you do that, you'll have the option of changing the format.
Do not right click and COPY. Simply drag the icon of the folder containing your media files from one disk to the other. It will copy by default.
good luck.
x

How do i run a file from my flash drive on my macbook air?

I haven't got a clue what I'm doing. I have saved content from a papercrafting software CD to my flash drive and am trying to open/run it on my new Macbook Air. When I try to run it I get a promp saying it can't open the application because Microsoft Wondows applications are not supported on OS X. It's a .exe file ... Do I need to buy an app to run it??

You need to use CrossOver Mac, WineSkin, or Windows. CrossOver Mac has a free trial.
(82997)

How to import video files from external hard drive?

I receive an error "You're trying to import a file from a DVD or Removable Media. Please use Video Importer for importing Videos..." however when I try this I still cannot import video files. This is extremely frustrating as we have 32 copies of this software and this is sarting to become a common issue. Please help and many thanks.
Attached is a screenshot...

jasonkmtr
Premiere Elements 12 Mac
A few more questions for now.
Taking your particular .avi files out of the equation, can you import any other format from Add Media/Files and Folders pointed to this external hard drive? What is the format of the external hard drive? NTFS or FAT32?
It is my recollection that AVCHD.avi has always been reported as highly problematic. Yet you seem to be saying that you have no problem importing them in to the project from the desktop with the program's Add Media/Files and Folders/Project Assets to Expert workspace Timeline.
Did you purchase your Premiere Elements 12 from the Mac App Store or from Adobe? If Mac Store, what do you have Adobe Premiere Elements Editor or Adobe Premiere Elements Quick Editor or some variation thereof?
You wrote
A number of users are experiencing this issue - they connect their hard drive, load Elements, start a new project and go to add media (from the ext hard drive) using the files and folders option.
Could you supply more information on this via link(s) which have reported this issue.
Thanks.
ATR

How do I load PDF files from my flash drive to my iPad

just go an iPad and need to transfer several PDF files from flash drive to the iPad. I get an error message,not enough power

You can't! If you have a computer you can send them bij email to your iPad or use the free Dropbox; http://db.tt/VCNzkXr

How can I open encrypted files from a flash drive?

I moved transferred files from my work PC to a flash drive and had to encrypt them using Credant. I know the password but can't find a way to decrypt the files on my mac...

You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

Restoring lost video files from iPod Classic

I was recently trying to move my Video Files (last three seasons of Cops all downloaded from Itunes) to a different location on my computer. To put a long story short they somehow disappeared and I’m not sure how. I have searched my hard drive and I didn’t even have them in my recycle bin.
Fortunatly I still have them on my iPod Classic (160 GB) and I’m trying to figure out how to recover them from it, but I’m not sure if I have it set up to sync video files automatically or if it even works that way and I’m afraid to plug it into my computer or it might sync and delete the files.
The first thing I tried was to plug it into a different computer (already authorized) so it would upload the files downloaded then I could use an external drive to transfer the files back to my regular computer. I was able to get the most recent season uploaded, but then I got an error message saying that it couldn’t upoload some of the protected files unless my computer was authorized (even though it was). I re-authorised my computer and it still didn’t work.
I read that you can press Ctrl-Shift and hold it down while you plug your iPod in that it will prevent auto-syncing. I tried this but as soon as my iPod said “synchronizing” I unplugged it.
Does anyone know how I could pull these files from my iPod to get them back on my computer?
Message was edited by: WarHawkJAH

To prevent auto sync, before you connect the iPod go to the iTunes preferences and select "devices", then select "disable automatic syncing for iPhones and iPods".
Then see: How to copy iTunes purchases from an iPod or iPhone to a computer.

Lost video file from a flash drive using iMac

Similar Messages

Maybe you are looking for