LOV in UIX setting searchAreaMode="advanced"

Hello,
It appears by default if the searchAreaMode is set to advance a button "Simple Search" button is rendered.
What property do i set to not render that button since I only want the user to have one search mode...

Hi Serry,
I am assuming that you know how to "advanced" search in lov window in UIX.
If you know, could you please let me know how to use "advanced" search (searching by multiple fields).
I would appreciate if you could forward me any tutorial or help URL if there is any.
Thanks in advance
Syed

Similar Messages

Just set up advanced calling 1.0 and restarted my phone but "Video Calling" is not in my groups under contacts

Just set up advanced calling 1.0 and restarted my phone but "Video Calling" is not in my groups under contacts

iphone 6/6P do not support AC 1.0 HD video calling at this time. It does support HD voice, but there is no HD indicator, but you can immediately hear the difference.

LOV /ADF UIX pages does not work on the older version od UIX page

Hi
I have recently migrated UIX project from the Jdeveoper 9i to Jdev10g version 1.0.1.2, everything work without any issue, however when I try to create a LOV or any component that are ADF-UIX based, but it does not work I don't even get any error, it just does not work based on the ADF-UIX (Expression base component),
Any help to resolve this issue will be greatly appericated
Thanks

I too have problems with LOVs in UIX pages. I have
some that you have to run twice to get back a value.To solve this problem,
1) open your UIX page where you create a new row
2) in the Structure window, click third tab "UI Model"
3) double-click the control action binding corresponding to Create
4) select CreateInsert from the list
The problem is related to the fix we introduced for the "Blank Row Issue" (see http://www.oracle.com/technology/products/jdev/tips/muench/blankrow/index.html).
If you have access to MetaLink, please refer to Note 299860.1 and Bug 4201020.
Regards,
Didier.

UIX LOV default query setting

When clicking on a flashlight next to an empty or blank âmessageLovInputâ, its "inputValue" being blank, the resulting LOV popup will show no records found. How can I set either the "inputValue" of the âmessageLovInputâ or search field in the LOV popup to a default value of â%â?
The LOV uix source is set to:
<listOfValues title="Data Source ID" searchText="${param.searchText}" searchAreaMode="filter">
I need to either set the âmessageLovInputâ, its "inputValue", to â%â or when the LOV popup is initiated to set its âsearchTextâ to â%â. When set to â%â the LOV will show all records available in the LOV.

Hi Ed and Karyn,
Ed, in your example you add <parameters> tag for every search column of the table. I just use one in my application and it works. I hope my example will help :)
<messageChoice name="filterBy">
<contents>
<option text="Department ID" value="DEPARTMENT_ID"/>
<option text="Department name" value="DEPARTMENT_NAME"/>
</contents>
</messageChoice>
<event name="lovFilter">
<compound>
<null/>
<invoke method="setWhereClause" instance="${bindings.DepartmentsView1.viewObject}" javaType="oracle.jbo.ViewObject">
<parameters>
<parameter javaType="string" value="${empty param.filterBy ? 'DEPARTMENT_ID' : param.filterBy} LIKE '%${param.searchText}%'"/>
</parameters>
</invoke>
<invoke method="executeQuery" instance="${bindings.CustId.viewObject}" javaType="oracle.jbo.ViewObject"/>
</compound>
</event>
'DEPARTMENT_ID' in <parameter> is just a default value in case param.filterBy is null.
Note that I use value property of Choice to assign a table column for whereclause and text property for choice description. So you can write whatever in text to help user.
Also I have a question. I need my LOV window to be called from different UIX pages. Do you have an example of this? The problem is in updating different UIModels from one LOV window. At forum I was advised to write event handler to update provider depending on source parameter. But unfortunatly I don't know how to do so.
Thank you in advance.

How can I get a LOV to work in the advanced search area

I am using JHeadstart 10.1.3.3.
We are doing a LOV lookup on User-id. When the user selects a user-id or just starts keying in a user-id I have my Jheadstart code to pull in the full-name whenever the client selects a new user-id or starts keying a userid.
Under UserId we have the following definition
PersonIdentitiesLOV
UserId <= UserId
FullName <= CombinedName
We set up PersonIdentitiesLOV so that "Use LOV for validation" is set to true.
When I tested my code, in the advanced search this is what happened:
1) When the client selects a user-id the FullName field gets populated
2) When the client just keys in the user-id then the FullName DOES NOT get populated.
Someone told me that there is a bug in JHeadstart in 10.1.3.3 where if you turn on the "Use LOV for validation" then it does not get executed in the Advanced Search.
How do I get around this problem.
If this does not work then how would it be best to display the full name whenever someone keys in a user-id. We are using this full name display for auditing purposes at the cashiers wicket whenever someone keys in a userid and does not recognize the person. We want the full name displayed along with userid for verification purposes.
Any idea on how to get this working?

This is not a bug, it is intended behavior.
In search fields you might want to search for parts of the name, using a wildcard, that's why the auto-complete is not working there.
If an end user wants to search the complete name, he can use the LOV to pick a value.
Steven Davelaar,
JHeadstart Team.

Quoting strings in message lov input (uix)

Hi, I used a message lov input to replace a field in the regular search form (uix). The problem is that the input isn't backslashed properly. Is there a setting I have to toggle to enable this?

Hi John Fitzgerald,
Sorry for taking a long time to respond.
I am not able to get your question clearly.
Can you kindly rephrase it and be more elaborate.
Can you kindly let me know what you are really expecting and what is happening?
Thanks,
Vijay V
Team UIX

Command to set modify Advanced Security Settings (Audit Settings for folders) on windows 2008

Hello,
We have requirement to modify Advanced Security Settings (Audit Settings for folders) on windows 2008. I am looking for a command which does this job.
I know, using group policies I can do this; in fact I had done this using group policies. However, I need to do this on number of servers which are not in domain. There are around 15 folders on which I need to enable Auditing; manual editing folder advanced
permissions is a cumbersome job. Hence, I am looking for a command line options.
I need to know how command can be utilised to enable Audit option on a folder. Please share a command which can do this; once I get the command, I will create a batch file for other necessary folders. (BTW, this is not a scripting question, I just need to
know the command hence, please do not re-direct me to scripting forum)
Manually through GUI, I am setting following.. snaps are given below
Thanks !

You can try using Auditpol.exe: http://technet.microsoft.com/en-us/library/cc731451%28v=ws.10%29.aspx
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer
Thanks but I guess, auditpol ca be used only to manipulate system audit policies. how do I specify a folder and user in auditpol ? I could not find or understand how folder can be included with auditpol command line options.
Thanks !

Windows 8.1-No UEFI firmware setting in advance option. Can't access BIOS with F2-Lenovo B575

There was Windows 7 Home Premium on my machine before (Lenovo B575)and I could access the BIOS and Boot Menu pressing F2 and F12. I installed Windows 8 Enterprise version first and lost the ability to go into the BIOS. I upgraded this version to 8.1 with
same results. In advanced option I don't have UEFI firmware setting tile. So I can't choose to get to the BIOS with this method. I have tried to go into the BIOS at the boot pressing F2 and many other keys with no result. The OS in both cases 8 and 8.1 hung
several times during the installation process. I had to manually reboot machine during installation several times. After the windows were installed the system still can't shut down or restart normally and I have played with different settings in power / shutdown
option. Please help. I need to be able to access my BIOS at boot or Windows level. Any help will be greatly appreciated. Thanks.

Hi,
The method to enter into advanced boot option in Windows 8\8.1 is different from Windows 7, pressing F12 during boot may not work because the booting process in Windows 8\8.1 is too fast. Here's an document from Lenovo website:
http://support.lenovo.com/en/documents/ht081446
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Please Note the sentence at the end: Lenovo preloaded Windows 8/8.1 is set up with UEFI boot. If your computer is not fitted with UEFI boot, you can only enter BIOS setup or UEFI firmware via the traditional method.
that means If you installed Windows 8\8.1 the U/EFI way you should be able to access UEFI options,
To check if you boot UEFI way, run in admin command prompt:
bcdedit
for example:
If path ends in
.efi - you boot U/EFI way, and path ends in .exe - you boot normal BIOS way.
Yolanda Zhu
TechNet Community Support

Copying or exporting an application - bug? LOVs not getting set in reports

Hi all, I apologize if this has been on here before, I thought I may have seen something about it before, but my search turned up empty.
When I copy an application, or export/import it -- it seems all the LOV based items in my reports (IR or otherwise I think) don't get set. For example if I have a query returning a data value back as 1 or 2, and I have an LOV to translate that to 1 = Male, 2 = Female -- and I have it set to display the value of the LOV for the value -- that is seemingly getting lost in the copy.
It's extremely painful to have to go to my new copied app and set everything manually again. And this is horrendous for an import/export from dev/test/production moving.
Any thoughts/ideas how to resolve? Is it an APEX bug?
Thanks
David

I just upgrade to 4.0.2 in hopes it would solve my problem, but unfortunately it doesn't. What could it be about my app? Again, here's what is happening: it seems that anywhere I'm using a "display based on LOV" column in a report (maybe just on IRs, can't find any on non IR reports) -- when I either export/import my app, or simply copy it in the same workspace, the Named LOV attribute is not set in the copy/import -- so the reports don't show my display values.
Could it be something about my LOVs? Maybe I should try to recreate some of them?
I wonder is there somewhere in the export file that I could look to see what's missing/going on? Weird thing is that when I ran a copy of my app, there was at least ONE report column that as showing correctly, but when I go and edit that column, I can see the LOV is NOT selected, and I can't save it without selecting one! So it's very strange, and unfortunately 4.0.2 doesn't solve it.
I'll have to try to create a new lov and do a test. But this is a big deal because I can't move my app to from DEV to TEST or PROD if I have to go into it afterwards and change all the LOV based columns. I suppose a work-around would be to change all my queries to get the display value themselves instead of relying on the LOVs....I wonder if that would be more or less efficient?
No one else has seen this issue?
Thanks
David

How can set custom advanced print setting to default?

Hi
I am using job automation program called enfocus switch and
Every time it automatically print out PDF file, i wanted it to be printed out with bleed mark and page information.
As i go to advanced print setup, i can achieve this by set setting to custom setting that has checked bleed mark and page info.
Is there any way to set custom setting as default so Evey time enfocus program print out PDF, it is printed out with bleed marks and page info.
Thanks

this is what i wanted it to be default. checked bleed marks & page information
went to setting-adobePDF. coudn't find any thing related to bleedmark and page info.
Hope this give you more detail thank you for your time.

Can Captivate be set to advance when only a certain key is pressed

I am doing software training simulation. I am trying to teach the user how to do a set of tasks. In the software you must press certain key to accomplish certain steps so I want to set captivate to advance to the next slide only when the correct key is pressed such as the delete key. I am fairly new with captivate. Is this possible? Will I need an advanced action to do this? Thanks

Each interactive object, like a Click box, can be assigned a shortcut key. If you are capturing the software training simulation (Automatic), those click boxes are created for you. In the Properties panel of the Click box you can assign the shortcut key. Normally you do not need an advanced action for that. And be sure to give Infinite Attempts if the user can only proceed when that shortcut key is pressed (but avoid frustration, maybe with the Hint caption?)
Lilybiri

LOV switcher and set current Row

Hi
I have a LOV switcher attached to one of the columns in the view object.
It works fine while switching the LOV's in mostly all conditions.
But its failing for one case.
We are using checkboxex to select a row , and do a operation in the row.
To do this, the button on which the operation is performed ...
1)we have checked which row has the transient value of check box as checked
2) Set the current row of the iterator to the row that comes from the selected check box index..
3) Called the operation.
But as the code go to step two and the current row is set to the required row, all the LOV 's in all the rows start showing the Default LOV which is selected in the LOV switcher, if i do a f5 fr the page, the original values are restored.
Also if the VO fecth size is 25 , it gives wrong value for 25 rows, if i scroll through the table again it automatically shows the correct value.
This has been taking a lot of out time to debug the issue.
I guess its somethng to do with LOV switcher , set current row and the table getting refreshed incorrectly on set current row

Hi Timo ,
Thanks fr the reply..
Jdev 11.1.1.4
Code for checkbox selection
DCBindingContainer dcbindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding iterator =
dcbindings.findIteratorBinding(iteratorName);
Row[] rowSet = iterator.getAllRowsInRange();
Integer selectCount = 0;
for (Row row : rowSet) {
Object selAtt = row.getAttribute(selectAttribName);
if (selAtt != null && (Boolean)selAtt == true) {
System.out.println("Row selected");
selectCount++;
if (selectCount > 1) {
System.out.println("More than one row selected!");
throw new ValidationException("More than one row selected");
else{
iterator.setCurrentRowWithKey(row.getKey().toStringFormat(true));
} else {System.out.println("Row not selected");}
I actually sorted the issue out
had to write
iterator.refresh(Row.REFRESH_CONTAINEES); after iterator.setCurrentRowWithKey(row.getKey().toStringFormat(true));
But not sure if thts correct ...

Set Page Advance Time to Length of MP3

Hi
I have a document (2500+) that have some pages with 1 mp3 file attached to the page.
I would like to set the page advance default to .5 second but for the pages that contain a single mp3 file I would like to set the page advance time to the length of the mp3 file (which I would need to script to calculate).
I am not looking for a complete script just some basic guidelines of the relevant properties and methods I would use.
Also I would like to know if this could be done or integrated with the actions wizard.
Thanks
Trevor

Check out the following links. Let us know if helpful.
BOL 2008:
Page Breaks
In some reports, you may want to place a page break at the end of a specified number of rows instead of, or in addition to, on groups or report items. To do this, create a group in a data region (typically a group immediately outside the detail), add a page break to the group, and then add a group expression to group by a specified number of rows.
The following expression, when placed in the group expression, assigns a number to each set of 25 rows. When a page break is defined for the group, this expression results in a page break every 25 rows.
=Int((RowNumber(Nothing)-1)/25)
http://www.spacefold.com/lisa/post/2009/03/08/Dynamic-Page-Breaks-in-SSRS-Going-to-Eleven.aspx
Kalman Toth SQL SERVER 2012 & BI TRAINING
New Book: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2012

I need help setting Win7 Advanced attributes for the USB drive connected to my EA4500 router

I can drill down to the Permission Entry for [foldername] window for a folder on the USB drive. There I learn that user group Everyone does not have the Full Control permission box checked. When I check the box and then click Apply, I get an Error Applying Security window. If I click Continue there, I get a Windows Security window that says "Unable to save permission changes on [foldername]. Access is denied." with no way out but an OK button.
I have Administrative authority in Win7, but maybe I need to know some Unix voodoo to come to terms with my router-mounted drive. I put the drive on the router to make always available, and I'd like to get it to work. For example, I can't turn the archive bit off for any file or folder on that drive when it's mounted on the router. Not with ATTRIB -A and not with XCOPY /M.
Just to stuff it in my face, XCOPY /M returns a two-line error message for every sub-folder that exists in the target folder:
Access denied
Unable to create directory - foldername
Help! And thanks in advance.
:+)
Solved!
Go to Solution.

Bill Dennes,
(Solutions/Work-Arounds below this paragraph, but sets up some useful information.)
As for the Security tab, I'm unsure of exactly why it doesn't appear on the tab itself for folders; however, clicking "Advanced -> Change Permissions -> Edit" will display the permissions; although, this doesn't appear to be a part of the problem in a sense. Additionally, “Everyone” always only has read & execute and is also not a part of the issue. To go further with this, the only users that have delete permission are “0” and “root” and since we can delete, we “should” be logged in as one of them and as such have “Full Control.”
As for the drive type, I'm unsure of why it "changes" it from FAT32 to NTFS (probably something to do with how it handles permissions); however, this is also not a part of the issue.
I have a flash drive formatted to FAT32, albeit only a 4GB and on an EA6500 with secure sharing enabled, that it does these both to and "xcopy testfolder Y:\ /e /m" works on it when all files and folders have the A attribute; however, disabling secure sharing makes it fail.
I’ve looked further into this and there are three ways I know of, as of right now, to make copying files with the bat file work for you:
The first way is to enable secure sharing and map the drives using it, once that is done you won’t need to enter the password again and your script will work as you currently have it coded. Given you have no need for the secure sharing, but it’s a simple solution. This is also the only way to be able to modify any attributes, although the only ones I know of that it will accept are R and A.
The second way is to instead use ROBOCOPY with the options /e, /m, and /copy:dt.
For example: "robocopy testfolder Y:\ /e /m /copy:dt"
/e = Copy subdirectories, including empty ones. (or use /S which will not copy empty folders)
/m = Copy only files with the Archive attribute and reset it.
/copy:dt = Copy data and timestamps, does not copy attributes, security, owner info, or auditing info.
The only important option to use is /copy:dt, the others can be replaced with whatever you need. Note that things like Song Author will still get copied as they are a part of the data section. I don’t believe XCOPY supports doing this, and in either case robocopy is a better solution that comes with Windows Vista and up, and can be gotten for those below Vista.
The third way is to add a section to the script to remove attributes from all folders before using xcopy to copy to the NAS, or modify the section that is causing the folders to have the A attribute as xcopy will gladly still copy them with /E or /S enabled.
The issue seems to be that when secure sharing is off, the server refuses attribute changing of folders, which is what is causing XCOPY to fail, as I suspect it attempts to change the attributes on the folders. Similarly, using robocopy without /copy:dt will also fail but gives you “Error 5 … changing file attributes [folder/path] Access is denied”. This is why I suspect that when XCOPY says “unable to create directory” that it is actually trying to change the attributes of the directory. Furthermore, it seems that the reason this works while secure sharing is on is that while it is on, the server pretends to accept the attributes but in reality ignores all attributes besides R. The server then adds the A attribute to all files put onto it, which you can only modify when secure sharing is enabled for some reason. The exception to this is that in either case, any file with the “H” (hidden) attribute, will not be copied, even if explicitly told to copy it. (This is true for both robocopy and xcopy; you also cannot manually add it afterwards.)
Is there an issue with the files on the NAS having the A attribute? If so the only way I currently know of to get rid of it is to enable secure sharing and have the script remove the attribute after copying. For example, when you look at the permissions, the user "0" and “root” have full control as I've previously stated. You can tell Windows to specifically use one of them when mapping the drive, which in turn should give you full control; however, the server still refuses modifying attributes without secure sharing on for some strange unknown reason. Although, I am no "UNIX gearhead," so there may in fact be another way that I do not know of. The only time they are not listed as “Full Control” on my end is when a file was previously marked Read-Only, in which case they all share the same limited control. When I said in the beginning that the permissions are not a part of the problem in a sense, it’s more of that for the general case of what you need to do, they aren’t the problem as long as you don't need the R attribute and having the A isn't an issue, as it seems to be more of the server is refusing attributes even though we should have permission; however, they do appear to be a bit weird and are possibly displaying incorrect when secure sharing is disabled.
I'd like to apologize in advance for any unclear, weirdly stated, or just plain odd things said in this post as I was pulled away to do a bunch of things and ended up editing, adding things, and finishing it late into the night and hope that one of the above is an acceptable resolution to your issue.

Can I set up advanced boolean strings for rules?

I want to set up Mac Mail so that it automatically deletes certain kinds of Bacn after 30 days... but the "rules" in Preferences only give me the option of "Any of these conditions" or "All of these conditions." What I'd ideally like is to be able to set up a boolean search that would read something like...
content="unsubscribe" NOT sender=("list i want to keep" OR "other list i want to keep") AND age>30
...in order to capture just about all email list items (they all have "unsubscribe" somewhere in there), remove the few lists I do want to archive (the NOT argument), and get only those messages over 30 days old.
Is there an advanced way to work with email rules in Mail - maybe manually edit - so that I can combine the boolean AND, OR, and NOT arguments in rules?

Rules are only applied manually or to new incoming messages, so this will not be a way to automatically remove items after 30 days. You should be able to achieve what you want with something like an AppleScript that runs periodically, though I'm not an AppleScript expert, so I can't give you a script to do that. Alternately, you could create a smart mailbox that matches messages that you want to delete, and then just go to that mailbox periodically, select all messages and delete them.

LOV in UIX setting searchAreaMode="advanced"

Similar Messages

Maybe you are looking for