Low fax quality using fax as a system printer

1. The fax quality and resolution using the original setup as a printer is very low.
I can't see the reason because it's all done without printing, a digital file format tranforming.
2. How can I approach the fax manager not when printing a new fax?

Hey there @Kroi!
Thank you for posting on the HP Forums!
I would be happy to provide some help regarding your Officejet 4500 and the fax resolution. On the printer you should be able to set the fax resolution to fine or very fine and make the fax lighter or darker. Once those settings are inputted you should be able to save them as a default on the printer.
To change the fax settings press the fax icon on the printer. In the fax menu you should be able to scroll to fax resolution and press OK. Under fax resolution you should be able to choose from fine, very fine, photo and standard. I recommend choosing fine or very fine. You should then be able to scroll to lighter/darker to adjust those settings. Once the settings are set scroll to "Set New Default and confirm.
Test by sending a fax and see how it goes!
Thanks again for posting and have a great day!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Similar Messages

Lower audio quality using iphone

listen to this quite strange thing: some of my mp3 files, played with my iphone 4s, have busted/broked low tones. then i tried to see if a friend's iphone had the same problem: with an usb, i put one of the files in his computer, then through itunes inside the iphone and: same thing. low tones are distorted.
not surrender, i tried to send to another friend's iphone 4s the file in question by email. misterriously the sound was pretty good. as final test, i auto sent the file by email to me and: my iphone played it good (it appears on the screen a quicktime logo, and he plays the song remaining in the email app).
i specify that not all the song with many low tones have the problem on my (and my friends) iphone. just some of them.
any explanation or solution?!?!?!
thanks to you all.

I have new Factory Unlocked iPhone 5 with new earphones. These earphones are pretty smooth while listening to music. When it comes to making calls there is lot of noise background or a sort of amplifier sound and both the ends the audio is not clear. Did any one face this issue with new earphones with iPhone 5? if so, what is the solution for this? Can any one help me resolving this issue as I am the extensive user of iPhone 5 with new earphones? Thanks in advance.

Faxing using a officejet 4500 wireless printer and a verizon wireless phone system

can I fax using a officejet 4500 wireless printer from a Verizon wireless home phone?

How do I set up send fax and receive fax with my Officejet 4635?

I want to fax from my mac using a Brother MFC-7220 Printer/fax

I'm currently using a Brother MFC-7220 Printer/Fax machine with my Mac Mini, attached via USB.
It works great as a printer, but I want to fax from within Mac Applications using the 7220.
I tried going "File/Print, then selecting the PDF pull down menu in the lower left corner of the print management window. I selected "Fax PDF..." but the system comes back with a "No Fax Modems Found.." message.
Any suggestions/solutions ?
Thanks

You may need to install the Brother drivers.
By default, Mac OS X only installs the printer drivers, ignoring other features of multi-function devices. By installing the vendor's driver you gain access to the other features.
In this case you should find that installing the driver enables a new printer option - Brother MFC-7220 (Fax) - which can be used to send your fax. So now faxing is as simple as choosing 'Print' and selecting the 'Fax' option from the list of available printers.

How to send fax thru sap system

Hi all,
I need to send a fax thru sap system. In the given parameter I need to give email address & fax number. The result is the content I shud receive as both email & fax.
As far as email is concerned no problem. But I am not receiving the content fax. I am getting the following error as email. Pls find below the error message.
Your message did not reach some or all of the intended recipients.
      Subject:     000000002008
      Sent:     4/5/2007 11:47 AM
The following recipient(s) could not be reached:
      FAX3D2B918041396976@75 on 4/6/2007 2:31 AM
            The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.The MTS-ID of the original message is:ADR32000000006890
< sap.corp #5.1.1 SMTP; 553 <FAX=+918041396976@75>... only FQDN names will be accepted>
The fax number I typed is +918041396976 but the system itself is adding @75 behind it. I am not getting the fax message.
Can anyone help me in this regard.
Thanks in advance.
Vijay.

Hi Vijay,
The fax nio. parameter can be handled thru the program. I mean remove those extra characters... and try this code below for ref (its from sap-img.com)
The following program shows you how to send a fax from within ABAP/4. The report is delivered
in the standard system and is used in Transaction SCOM for the function "Send test fax".
Only the method via the call of SAPscript with DEVICE='TELEFAX', described below, ensures the
generation of a correct transmission request, independent of the R/3 release and of the used
fax server solution and its configuration.
The regular printing (for example, with NEW-PAGE PRINT ON...) on an output device created in
the spool administration of the device class 'Telefax' does generally not work!
REPORT RSKSENDF MESSAGE-ID SK.
Test report to send a test fax
sends a fax to the number <TO_CNTRY>-<TO_NMBER>
containing an automatically generated message text.
TABLES: USR03.
PARAMETERS: TO_CNTRY LIKE T005-LAND1 OBLIGATORY,
TO_NMBER LIKE TSP01-RQTELENUM OBLIGATORY,
FROM_USR(30) TYPE C DEFAULT SY-UNAME,
TO_RECIP(30) TYPE C DEFAULT SY-UNAME.
SAPscript content ITAB
DATA: BEGIN OF TEST_DOC OCCURS 10.
INCLUDE STRUCTURE TLINE.
DATA: END OF TEST_DOC.
SAPscript header struct
DATA BEGIN OF HEADER.
INCLUDE STRUCTURE THEAD.
DATA END OF HEADER.
INITIALIZATION.
get county from user addres in usr03
system->user profile->user address
check if not empty
SELECT SINGLE * FROM USR03 WHERE BNAME = SY-UNAME.
IF SY-SUBRC = 0 AND USR03-LAND1 <> SPACE.
TO_CNTRY = USR03-LAND1.
ENDIF.
START-OF-SELECTION.
PERFORM FILL_UP_TEST_DOC.
PERFORM SHOW_TEST_DOC.
AT PF08.
PERFORM SEND_FAX TABLES TEST_DOC USING TO_CNTRY
TO_NMBER.
AT SELECTION-SCREEN ON TO_NMBER.
PERFORM CHECK_NUMBER USING TO_CNTRY TO_NMBER.
*& Form CHECK_NUMBER
FORM CHECK_NUMBER USING
COUNTRY
NUMBER.
DATA: SERVICE LIKE TSKPA-SERVICE VALUE 'TELEFAX',
LEN LIKE SY-FDPOS.
FIELD-SYMBOLS <P>.
windows GUI push the ? from mandatory input instead
of overwriting it
LEN = STRLEN( TO_NMBER ).
IF LEN > 1.
SUBTRACT 1 FROM LEN.
ASSIGN TO_NMBER+LEN(1) TO <P>.
IF <P> = '?'.
<P> = SPACE.
ENDIF.
ENDIF.
official check FM
CALL FUNCTION 'TELECOMMUNICATION_NUMBER_CHECK'
EXPORTING
COUNTRY = COUNTRY
NUMBER = NUMBER
SERVICE = SERVICE.
on old 21?/22? release you may have to handle the
exception
because the Function uses RAISE instead of
MESSAGE... RAISING....
ENDFORM. " CHECK_NUMBER
*& Form FILL_UP_TEST_DOC
fills test text in itab TEST_DOC *
real life example needs to get real life data *
FORM FILL_UP_TEST_DOC.
DATA: DATUM(12) TYPE C,
UZEIT(10) TYPE C.
SAPscript initialization
of course, you may want to set a few parameter
(FORM,LAYOUT,....)
CALL FUNCTION 'INIT_TEXT'
EXPORTING
ID = 'ST '
LANGUAGE = SY-LANGU
NAME = 'FOO-BAR'
OBJECT = 'TEXT'
IMPORTING
HEADER = HEADER
TABLES
LINES = TEST_DOC
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC <> 0.
MESSAGE A400 WITH 'INIT_TEXT'.
ENDIF.
PERFORM ADD_EMPTY_LINE.
WRITE: SY-DATUM TO DATUM.
WRITE: SY-UZEIT TO UZEIT.
PERFORM ADD_LINES USING 'This is test Telefax'(001)
DATUM UZEIT.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING 'From: &'(002) FROM_USR SPACE.
PERFORM ADD_LINES USING 'To: &'(003) TO_RECIP SPACE.
PERFORM ADD_LINES USING 'Fax number: & &'(004)
TO_CNTRY TO_NMBER.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING
'This is a test fax send by Report RSKSENDF'(005)
SPACE SPACE.
PERFORM ADD_LINES USING 'on SAP system & '(006)
SY-SYSID SPACE.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING
'the quick brown fox jumps over the lazy dog.'(101)
SPACE SAPCE.
PERFORM ADD_LINES USING
'THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG.'(102)
SPACE SAPCE.
PERFORM ADD_EMPTY_LINE.
PERFORM ADD_LINES USING 'End of test'(007) SPACE
SPACE.
ENDFORM. " FILL_UP_TEST_DOC
*& Form ADD_LINES
printf a line an appends it in test_doc *
--> cformat format.
--> p1 param1
--> p2 param2
FORM ADD_LINES USING CFORMAT P1 P2.
TEST_DOC-TDFORMAT = '/'.
TEST_DOC-TDLINE = CFORMAT.
IF TEST_DOC-TDLINE CA '&'.
REPLACE '&' WITH P1 INTO TEST_DOC-TDLINE.
IF TEST_DOC-TDLINE CA '&'.
REPLACE '&' WITH P2 INTO TEST_DOC-TDLINE.
ENDIF.
ENDIF.
APPEND TEST_DOC.
ENDFORM. " ADD_LINES
*& Form ADD_EMPTY_LINE
appends an empty line to test_doc *
FORM ADD_EMPTY_LINE.
TEST_DOC-TDFORMAT = '/'.
CLEAR TEST_DOC-TDLINE.
APPEND TEST_DOC.
ENDFORM. " ADD_EMPTY_LINE
*& Form SHOW_TEST_DOC
lists the test doc for aproval *
*>>>> this is for fun only because PRINT_TEXT also
offers a preview *
FORM SHOW_TEST_DOC.
FORMAT COLOR COL_BACKGROUND INTENSIFIED OFF.
WRITE: / 'Test fax would look like this:'(020).
ULINE.
SKIP.
LOOP AT TEST_DOC.
IF TEST_DOC-TDLINE <> SPACE.
WRITE:/ TEST_DOC-TDLINE.
ELSE.
SKIP.
ENDIF.
ENDLOOP.
SKIP.
ULINE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE: 'Press PF8 to send it'(021).
ENDFORM. " SHOW_TEST_DOC
*& Form SEND_FAX
send fax by calling SAPscript *
Note: Instead of using PRINT_TEXT you may also *
call OPEN_FORM / WRITE_FORM_LINES / CLOSE_FORM, *
this allows you to use a similar program structure *
as with NEW-PAGE PRINT ON / WRITE / NEW-PAGE PRINT
OFF *
FORM SEND_FAX
TABLES DOC2FAX STRUCTURE TEST_DOC
USING COUNTRY
NUMBER.
DATA: SID(5) TYPE N.
DATA BEGIN OF POPT.
INCLUDE STRUCTURE ITCPO.
DATA END OF POPT.
DATA BEGIN OF PRES.
INCLUDE STRUCTURE ITCPP.
DATA END OF PRES.
CLEAR POPT.
POPT-TDCOPIES = 1. " one copy
POPT-TDDEST = " done internaly by script,
POPT-TDPRINTER = " do not fill !!!
POPT-TDNEWID = 'X'. " do not reuse old spool request
POPT-TDDATASET = 'TEST'(022). " fill as you want
POPT-TDSUFFIX1 = 'FAX'(023). " fill as you want
POPT-TDSUFFIX2 = SY-UNAME. " fill as you want
POPT-TDIMMED = 'X'. " send now
POPT-TDLIFETIME = 8. " keep 8 days in spool
POPT-TDTELENUM = NUMBER. " number without country code
POPT-TDTELELAND = COUNTRY. " country of recipient
POPT-TDCOVER = 'test fax'(024).
POPT-TDCOVTITLE = 'test fax'(024).
POPT-TDIEXIT = 'X'.
CALL FUNCTION 'PRINT_TEXT'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'TELEFAX' "<<< here we say: fax it !
DIALOG = 'X'
HEADER = HEADER
OPTIONS = POPT
IMPORTING
RESULT = PRES
TABLES
LINES = DOC2FAX
EXCEPTIONS
OTHERS = 01.
do not bother with exception in sample code
CANCELED = 01
DEVICE = 02
FORM = 03
OPTIONS = 04
UNCLOSED = 05
UNKNOWN = 06
FORMAT = 07
TEXTFORMAT = 08
EXTERNAL = 09.
IF SY-SUBRC = 0.
arriving here means we could send:
SID = PRES-TDSPOOLID.
IF SID > '00000'.
MESSAGE S433 WITH SID.
ENDIF.
LEAVE .
ELSE.
do not bother with exception in sample code
MESSAGE A400 WITH 'PRIN_TEXT'.
ENDIF.
ENDFORM. " SEND_FAX

When using Lightroom Book module for Blurb book making, why do I keep getting a low image quality message if it's supposedly accessing my large raw files in my library?

When using Lightroom Book module for Blurb book making, why do I keep getting a low image quality message if it's supposedly accessing my large raw files in my library?

I think I've solved my problem with a Google Search. I came across a free slide show generator
(contributions requested) that shows much higher quality slide shows than either iPhoto or Aperture 3.
You click on a folder of jpegs and it almost immediately generates thumbnails and within a few seconds
I can be viewing a full screen, tack sharp, slideshow of all of the files in the folder. Much sharper than
I'm used to seeing.
I think I'll keep the Aperture 3 and use if for the purpose it's intended for in the future. I'll also redo the
image preview files to the small size it started with and then I'll copy all of the files I'm interested in from
iPhoto into a separate folder on another disk. I'll use Aperture to catalog and to perform image manipulations
on but I won't try to use it as an iPhoto replacement. I don't think I'll be using iPhoto much as an image
viewer in the future either after I finish moving my favorite pictures to the Phoenix Slides folder.
The name of the free program is Phoenix Slides. It's free to download and try, free to keep (though I
think you'd want to pay the small amount requested) and fast. My pictures have never looked so good
before.
http://blyt.net/phxslides/
Message was edited by: Jimbo2001

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

How do I use a NAS file system attached to my router to store iTunes purchases?

We have four Windows devices networked in our house. They all run iTunes with the same Apple ID so when any one of them has iTunes running, we can see that computer on our Apple TV. Two run Windows XP, one runs Vista Business, and the newest runs Windows 7. Upgrading all to the same Windows software is out of the question. Our NAS is hung on an "off warranty" Linksys E3000 router which communicates via USB with a 1TB NTFS formatted Western Digital hard drive. Our plan when we set up this little network, not cheaply, in our 1939 baloon construction tank of a house, was to build our library of digital images, music, and video primarily on that device. It supports a variant of Windows streaming support, but poorly. The best streaming support for our environment seems to be our ethernet connected Apple TV which is hung off the big TV in our family room, and has access to the surround sound "Home Theater" in that room. We've incrementally built up collections of photos, digitized music, and most recently educational materialsd, podcasts, etc. which threaten storage limits on a couple of default C: drives on these windows systems. iTunes, before the latest upgrades, gave us some feedback on the file system connections it established without going to the properties of the individual files, but the latest one has yet to be figured out. MP3's and photos behave fairly well, including the recently available connection between Adobe software and iTunes which magically appeared, allowing JPEG files indexed by Adobe Photoshop Elements running on the two fastest computers to show up under control on the Apple TV attached 56' Samsung screen!
Problems arose when we started trying to set things up so that purchases downloaded from the iTunes store ended up directly on the NAS, and when things downloaded to a specific iTunes library on one of the Windows boxes caused storage "issues" on that box. A bigger problem looming in the immediate future is the "housecleaning" effort which is part of my set of "new years resolutions." How do I get control of all of my collections and merge them on the NAS without duplicate files, or when, for example, we have .ACC and .MP3 versions, only the required "best" option for the specific piece of music becomes a candidate for streaming?
I envission this consolidation effort as a "once in a lifetime" effort. I'm 70, my wife is 68 and not as "technical" as I am, so documented procedures will be required.
I plan to keep this thread updated with progress and questions as this project proceeds. Links to "how to" experiences which are well documented, etc. may be appreciated by those who follow it. I plan to post progress reports and detailed issues going forward. Please help?

Step 1 - by trial and error...
So far, I have been able to create physical files containing MP3 and JPG on the NAS using the Windows XP systems to copy from shared locations on the Vista and Win7 boxes. This process has been aided by the use of a 600 GB SATA 2 capable hard drive enclosure. I first attach to Win 7 or Win Vista and reboot to see the local drive spaces formatted on the portable device. Then I copy files from the user's private directories to the public drive space. When the portable drive is wired to an XP box, I can use Windows to move the files from the portable device to the NAS without any of the more advanced file attributes being copied to the NAS. Once the files are on the NAS, I can add the new folder(s) to iTunes on any of the computers and voila, the data becomes sharable via iTunes. So far, this works for anything that I have completely purchased, or for MP3's I made from the AIC files created when I purchased alblums via iTunes.
I have three huge boxes full of vynl records I've accumulated. The ones that I've successfully digitized via a turntable attached to the sound card on one of my computers and third party software, have found their way to the NAS after being imported into iTunes and using it to bring down available album art work. In general I've been reasonably well pleased with the sound quality of digital MP3 files created this way, but the software I've been using sometimes has serious problems automatically separating individual songs from the album tracks and re-converting "one at a time" isn't very efficient.

Need to fax from my hp printer

Faxing

Hey @Barbdeak !
Thanks for chatting on the HP forums!
I would be happy to assist you with fax setup!
Fax setup is relatively the same on all HP printers but some HP printers use a feature called eFax. EFax is only supported by the HP Cloud Services department. I can provide you with information regarding Setting Up the All-in-One to Send and Receive Faxes.
If your printer is using the eFax feature then you will need to call HP Cloud Services. Please call our Cloud Services at 855-785-2777. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Here is a link to the Supported Printers for eFax. This should help you determine if you need to call HP Cloud Services or follow the document provided.
Let me know if this was useful information and please post back with the results of your troubleshooting.I hope this was helpful.
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Low image quality in pics

Hi: I have a ipad 2 and when taking are blurry photos in low image quality. I have to do something to improve the image quality?
I wait your comments...Thanks.

Two main points:
1. Use good lighting.
2. Remember the photo is actually taken when you release the shutter ("take photo") button. Make sure you do not move the iPad when you release the button.

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿c

I'm having problems with the reproduction of documents in Adobe X due to low reproduction quality ¿can you help me

Some things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
If you cannot open Reader by itself, try to disable Protected Mode in the registry; download, unzip, then run the attached registry script
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Fax confirmation sheet prints too small.

Every time I send a fax, the returning fax confirmation sheet appears printed in an extremely small, approximately 4-point type. I have two questions concerning this:
1. Is it possible to increase the confirmed fax type size to the same type size used when typing
a message?
2. Does the original fax reach the recipient in the same small type, or is it delivered the way it
was typed?
Thank you.
RipeRoman

Hi@RipeRoman ,
I see by your post that you would like to know if you can change the size of the text for the Fax Confirmation information and whether the recipient receives the fax in that same size. I can help you.
A confirmation report is a brief report that indicates the product successfully sent or received a fax job.
There wouldn't be any option to change the size that it prints and the recipient will receive the fax at a normal printed size.
The Fax Confirmation can be set to print after the following events:
Every fax job
Send fax
Receive fax
Never (the factory-set default)
To change this setting, go to Setup, Reports, Fax Reports, Fax Confirmation.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

PhotoSmart Premium fax C309 won't print black ink

Windows Xp series 2. Had been refilling ink cartriges when problem first occured. Installed two new black ink cartriges and still wouldn't print black ink. Cleaned print heads several times using the menu on the printer. Still did not correct the problem. Color is fine. Did a print test report and all color ink shows fine but no black. Alignment is fine. Do I need a new print head? Printer only gets occasional use.

Hi there blackcat61,
This article covers print quality issues like missing colors and others. Give the steps listed under your operating system a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Lower graphics quality after updating 2.2.1.

Is it just me, or any body else has notice that some of the buttons and transparencies on the iPhone are lower in quality than the early 2.2. version of the firmware? I just update to 2.2.1 yesterday but ever since I've notice this, for example, *look closely on the keyboard of the phone app, check the green button to place the call, it looks blur!* I don't remember if this looks the same on the previous 2.2. version, but I don't remember notice it before. Is like if they use a lower render bitmap here.
Am I becoming very demanding with the graphics or just been paranoid?
By the way, have no trouble with battery or dropped calls. Everything seems to work fine, except for the lack of quality in some graphics and some minor bug when I wake the phone, the click sound does not sound louder all the times, sometimes it sound very low.

I hope I'm just been paranoid, I'll hate to see the quality of the graphics on the iPhone dropped, because the interface is just so beautiful and well care in every detail. And well after all, Apple has always been in the market of graphics ever since they came up with the first graphic interface for the Mac back in 1984. I'll always think that mac os graphics look better that other OS, and now the iPhone looks like nothing before, so, that's what I'm been so demanding on the graphic quality issue. Right now, my iPhone is what keeps me close to Apple Computer, because right now, I'm stuck with a windows pc computer for the moment, and the iPhone is my Mac right now, so I don't want to lose high quality graphics, imagine how will you feel, if all of the sudden your mac os X desktop looks like Windows desktop? That's a nightmare! Right?

Why we use logger instead of System.out.println for debugging?

Hi,
why we use logger instead of System.out.println for debugging?
Regard
Sankar

Ya Basha,
good question....
You can use the idoc method to transfer the data when you are having an interface between the sap system and the legacy system......
All the times BDC is not preferable like take the case you developed on upload program with bdc after some days your company thought to go for upgrade the sap vesion from lower version to upper version... in that upgraded version the application may change like sequence of fields or screens at that time you previous bdc program will not work here so u have to develop a new program and and you have to take the things into consideration again...
where as if you use bapi or idoc method it will support the upgradations...
in the case of bdc you have to take the data into flat files.... and then upload it to sap system after all the validations done some times the data which is in the flat file is confidential so there is no security if u take such data in flat file any user can chang the data even though if u maintain the data in application server super user can change the data
where is idoc is fully secured... you can easily establich the interface between the systems and once it is done you can transfer the data with full security because idoc r generated by a program... so there is no manual interaction.....
I think i gave some useful answer to you
~~Guduri

Low fax quality using fax as a system printer

Similar Messages

Maybe you are looking for