Lpr printing fails

Configured iPrint with a printer. According to iManager 2.7LPR/LPD Client
Support is enabled for this printer object. Printer Control shows that the
printer is ready.
novell-idsd and novell-ipsmd services are running
Nonetheless, I can't seem to get it to accept any print jobs. Changed a
windows client to print to the server ip address with the printer object
name. It errors while queuing the job. This is the same test that I've
used in the past for lpr printing through NDPS printers.
I'd love to debug it further. Unfortunately, I can't enable CUPS printing
on the OES2 server that I'm using for iPrint since CUPS and iPrint can't run
simultaneously.
Where do I start looking for the printing problem?

I was testing with OES2. If I remember correctly, I responded to my own
question when I found my stupid mistake. I hadn't opened the tcp/ip port
through the firewall for lpr printing.
Thanks for trying to help.
.....Gregg
"Dan Sadaka" <[email protected]> wrote in message
news:Fmk6j.6720$[email protected]..
> Gregg,
>
> What version of SLES?
> What version of OES?
>
> Are you tring to print from the Linux command line (using lp) or are you
> printing from a Windows PC using the printer iPrint created. If so, did
> you create the printer using iPrint (http://server/ipp)?
>
> let us know...
> -Dan
>
> Gregg Nicholas wrote:
> > Configured iPrint with a printer. According to iManager 2.7LPR/LPD
Client
> > Support is enabled for this printer object. Printer Control shows that
the
> > printer is ready.
> >
> > novell-idsd and novell-ipsmd services are running
> >
> > Nonetheless, I can't seem to get it to accept any print jobs. Changed a
> > windows client to print to the server ip address with the printer object
> > name. It errors while queuing the job. This is the same test that I've
> > used in the past for lpr printing through NDPS printers.
> >
> > I'd love to debug it further. Unfortunately, I can't enable CUPS
printing
> > on the OES2 server that I'm using for iPrint since CUPS and iPrint can't
run
> > simultaneously.
> >
> > Where do I start looking for the printing problem?
> >
> >

Similar Messages

Report printing failed with "Servlet error: An exception occurred. "

Hi,
I use Apex 3.1 in Oracle Express edition develop few applications. In one of the application, when I enable report printing in stardard reports and try to print to PDF/Excel, the servlet error occur.
I had configured FOP in my server and I can download PDF in "interative report", but for stardard report, the report printing failed.
I can successfully print the reports in my others applications. Anyone know what could be the reason which cause an application failed to print the report.
Thanks
Vincent

Does your application name have special characters? I heard that the app name has to be just letters and numbers for this to work...actually testing right now.

HP Laserjet 1100 - print fails

Hi
I have an OLD HP Laserjet 1100 which I used to be able to print from fine on my old XP (SP2) machine. I have recently set the printer up on a new laptop running XP (SP3) using a parallel to USB converter. It's using the same drivers. However, now, whenever I try print I get an immediate message saying "Print failed". Doesnt give me a reason. Just won't print!! If there is anyone out there who can help me I'd appreciate it!
Regards,
AEC
p.s. Buying a new printer is unfortunately not really an option.

Hi there. This is funny, or sad really. I have the exxact problem. When it doesn't print it says this printer is not connected.
That just can't be. What about firmware? While nosing around the HP site I noticed it says firmware needs to be updated.
I'm not sure how to do this.
Have a great day,
Zarifa

PDF Printer fails to create document

I have Adobe Acrobat 8.1.2 Standard and today suddenly I cannot create a PDF file from Word 2007. It will create PDF files of up to 5-6 pages but when I try the file that contains 657 pages it will only go to page 90 before I get this error message: Adobe PDF printer failed to create the PDF file.
I have tried this a couple of times (shut down computer in between each try) and every time I get the same error at the same page. The last attempt was 2 1/2 hours ago and I still have the little Acrobat icon turning circles in my toolbar. Can anyone tell me how to correct this problem?
I am working on a Dell Inspiron E1505 running Windows XP SP2. I bought Acrobat back in May and this is the first time I've had a problem with it.

Hi DJ, what is on page 90 (or 91) that is keeping the PDF printer from completing? Any half tones in any graphics? Any intense tables? Graphs?
Have you tried just making a PDF from that one page? Drill down to the page that is causing the problem, try removing one element at a time, printing to PDF, until you discover what one element is creating this issue.
We had some snow flakes with gradient half tones in one of our documents that was causing an issue much like you are experiencing.
J.R.

Use of lpr printing in Windows 2008 InfoView.

Is there anyway of using lpr printing from the Print Settings or other method for sending report output to a printer from a scheduled report. The reason I ask is we are having issues with using the "Specify the printer" option with the printer specified directly. The BOBJ server has to have the print drivers installed on it for this to work. The scheduled jobs hang if the printer is does not print the job. The server may be trying to install the print driver or the printer queue may be hung for some reason. If we use lpr print it sends the printout to the queue and returns immediately no need to have the print driver installed on the bobj server.
I am interested in others solution to this problem.
Thanks for your help,
Bill

Hi,
im not aware of any other solution. as you already said, the print driver needs to be installed on the BOE Server and the printer needs to be mapped to the BOE Server.
Regards
-Seb.

Printing fails on Epson C62 using OS 10.6 but successful using OS 10.4

When I tried to print a document using Gutenprint 5.2.3.99.1 as driver for my Epson C62 printing failed with a message: "The PPD version is not compatible with Gutenprint 5.2 3.99.1". I tried printing a jpeg photo and got the same message. I successfully printed the document and photo on another iMac using OS 10.4.11. This problem started after I upgraded from OS 10.5 to OS 10.6.
Please help.

You've probably tried, but their site suggests:
Q: I don’t see my printer driver on the Epson Macintosh Snow Leopard Support page. Where can I find a Mac OS 10.6.x driver for my product?
A: Try the following:
Rosetta needs to be installed in Snow Leopard. If necessary, install Rosetta.
Go to Drivers & Support, select your product category, then select your product name.
Select Drivers & Downloads, then select Macintosh Operating Systems from the drop-down list and click Go.
Download the Macintosh 10.5.x drivers for your product.
Note: If there are no Macintosh OS X 10.5.x drivers available for your product, download and install the Macintosh OS X 10.4.x drivers and the Common Updater software for your product.
Follow the on screen instructions to finish the driver installation.
Make sure Rosetta is intstalled.
Joe

Printing failed because PMSessionBeginCGDocumentNoDialog() returned -108.

I have the following eror when trying to print multiple emails to PDF in mail, does anyone have any idea how to resolve it?
Printing failed because PMSessionBeginCGDocumentNoDialog() returned -108.
Thanks,
DM

I'm having this identical issue. Additional symptoms I've noted:
printing from Word or Excel produces a "Word could not communicate with the printer." or "Excel could not communicate with the printer." dialog box.
Printing from PowerPoint produces a "There was a printing problem. You may need to print again or adjust your printer settings."
Printing from Photoshop appears to work, but nothing ever comes out.
Printing from Safari produces a "Error while printing." dialog box. In the console, I get a log entry for Safari that reads "Printing failed because PMSessionBeginPageNoDialog() returned -30871."
Printing from TextEdit produces a "Error while printing." dialog box. In the console, I get a log entry for TextEdit that reads "Printing failed because PMSessionBeginCGDocumentNoDialog() returned -30870."
Switching "auth-info-required" from "negotiate" back to "username,password" throws up a username/password dialog box when printing - but printing works. Switching back to "negotiate" causes a printing failure again.
CUPS access_log shows a series of "Create-Job successful-ok" for everything attempted to be printed. Nothing in error_log or page_log.
Printing to a local or an IP printer works.
trev_f, have you made any progress on the issue?

Acrobat X on OS X 10.6.8 Printing Fails

I am printing to an Epson Stylus Photo 280, and have installed the lastest Epson Printer Update 2.7 via software update.
Whenever I try and print the printer starts to make noise, but then the printing fails and I get the following error message every time:
"Error: /Library/Printers/Epson/InkjetPrinter2/Filter/rastertoescpll.app/contents/MacOS/rasteroes cpll failed"
I can print any PDF using preview, but nothing prints via Acrobat X. Any PDF I try instantly fails.
Does anyone have any ideas on this, as bascially this makes Acrobat X pretty useless.

Jonah_Lee wrote:
Well it certainly seems to be driver related.
After looking at the console logs, I decided to try out the latest Gutenprint CUPS drivers and I installed Gutenprint 5.2.7 for my Epson Stylues R280, and low and behold, if I use the Gutenprint driver, I can get Acrobat to Print. So bascially this looks like something incompatible with the Epson driver. Is anyone able to print to an R280 using Acrobat X with the Apple installed Epson drivers? Am I the only one with this problem?
The problem of asking that question is that it's probably pretty unlikely that anyone else actually running an Epson Stylus R280 and Acrobat X under 10.6.8 will actually read your question. There are just too many variables...too many printers out there. Among the dozens of people who will read the post, almost all will be running other printers or other configurations.
You might see if there are any Epson user forums to finder other users of that printer.

Printer fail with Snow Leopard 10.6.1

I have two GCC Elite printers (XL 20/600 & XL 12/600) connected on our office network. Upgraded to Snow Leopard, got them to print by using LPD process but now find that printing fails intermittently if there are a number of files in the queue.
We are design studio, using Adobe CS4. The files are no bigger or detailed than when we were on Leopard.
Any ideas?

Hi TDCP - welcome to the forums.
Printer drivers have taken a hit with SL.
Unless you know for certain that your current drivers are fully compatible with SL, you may need to look for updates in that regard. Same goes for your Adobe products.
Anything in CUPS that helps?
http://localhost:631

HP 1300 printer fails to print certain PDF documents with OSX 10.7.5.

HP 1300 printer fails to print certain PDF documents with OSX 10.7.5.

I solved this through the phone call help ( which cost me $25 ...) - there was some name colusion in the printer name - the rep basicallt uninstalled everything, did hard resent to all devices - printer, router and Mac, then installed the printer again under new name , seems to solve the problem .

[Gnome 3] cant print from USB printer, Fail to add new printer

HI all!
I installed the following:
cups
libcups
gutenprint
Then add your CUPS server's IP address or hostname into /etc/cups/client.conf, after ServerName. That is all you need. Every application should quickly find the printer(s) shared by that CUPS server.
did not understand what am i suppose to write in the client.conf: 127.0.0.1 or my hostname (thegrid)
it says that later version on cups does not require to blocklist the usblp but i did anyways
but it didnt work
i restarted the computer too
any suggestion

entodoays wrote:I have similar issue. Whenever I try adding a USB printer in Gnome Settings, it is recognised but when I click add, I get a "Adding printer failed" popup. However, I can add printers through the CUPS web interface http://localhost:631/admin.
Hi, you can install "system-config-printer" ( i think resolve your issue).
sudo pacman -S system-config-printer.
I have a Cannon PIXMA 280. My steps to install the drivers( may be help you ) :
$ sudo pacman -S cups ghostscript gsfonts
$ sudo pacman -S kdeutils-print-manager gutenprint */KDE.
$ sudo pacman -S system-config-printer gutenprint */GNOME.
$ sudo systemctl start cups.service
$ sudo systemctl enable cups.service
Best Regards.

I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

I am trying to print off some work on my advent AW10 printer by connecting it with a usb cable to my macbook pro 13" 2011. On my laptop it keeps on saying printer failed. What do i do??

Hello molad,
Welcome to Apple Support Communities.
Take a look at the article linked below, it provides troubleshooting tips that can help you solve the issue printing from your MacBook Pro.
Troubleshooting printer issues in OS X - Apple Support
So long,
-Jason

Dell C1760NW wireless print fail

Trying to get a Dell C1760nw printer to work wirelessly with OS10.6.8 laptops. Printer works fine via USB cable. It also connects and prints wirelessly via WinOS laptops, but not the Macs. Drivers are updated on all laptops. The printer firmware is updated via the WinOS laptops (no option to update the firmware via the MacOS units. grrrr).
Macs are configured for both the USB printer version and the network with IP address version, with both icons showing in the Mac printer list. MacOS seems to be connecting to the printer, because during a wireless print job attempt, the printer list icon shows a yellow "busy" light, and the text shows "Connecting to Printer with the spinning dial - it never makes the connection. The printer widget in the Doc shows a red error dot. If the print job is deleted, the printer icon status changes to green "idle" light.
Currently using the default Dell IP address for the wireless operation.
Router is Netgear N300 with WPA encryption.
Macs & Win units all successfully access the router for www and email.
The push button connection btw printer and router did not work, even for the WinOS laptops.
Printer setting report shows port9100. Is that an open port on the Mac? Where do I configure ports in OS10.6.8
Mac Firewall is on. Print sharing (and all other sharing) is disabled.
Mac can ethernet cable into the router to connect to printer via the Dell interface. Settings can be adjusted, but printing fails via ethernet - same as wireless.
Any ideas or experience?
Thanks
-B

Bit of an update:
The router successfully pings the printer as follows. Ethernet cable or wireless access via Safari from Mac laptop to the router IP address brings up the router interface. Use the router interface to ping IP address of the printer - it's a wireless ping, because the printer is not cabled to the router.
Router interface lists the printer's IP in the Attached Devices screen and identifies it as the Dell Printer.
Ping report shows 4 packets sent, 4 replys received. I think this, and the fact that the Win Laptops can print wirelessly is proof that the printer is definitely on the router's wireless network. Can anyone confirm?
Printer Report shows printer operating through port 9100 and all the other port status items are marked enable (LPD, WSD, SNMP/UPD, EWS)
Printer report also shows these Network items:
Bonjour (mDNS)=enabled
IP Filter=Off
SSid= correct network name
Network mode=Infrastructure
Wireless Status=Good
Link Chanel=6
Encryption=WPA-PSK-AES/WPA2-PSK-AES
Any thoughts? things to try?
Some 801.xxx mismatch between Mac & Router? (but the Mac connects to router for www and email)
Is a port not open on the Mac?
Is there a Link Channel setting on the Mac?
-B

How do I LPR print to an LPD printer?

Hi All,
Google has not been helpful here. How do I LPR print to an LPD printer?
Many thanks,
-T

Hi Mark, not positive, but I think this is how you'd have to do it...
Set the new printer up with an IP in the same range as the Router, but higher than any IP that would be haned oout. Say The Router is 10.0.1.1 & hands out 10 IPs in the range of 10.0.1.2 to 10.0.11, give the printer an IP of 10.0.1.50.
Then add the Printer as an IPP to the computers, or likely hp IP printer.

Samsung printer fails after update to CUPS 1.7.5

On July 31 I updated my system and cups-1.7.4-1-x86_64, cups-filters-1.0.54-1-x86_64 and libcups-1.7.4-1-x86_64 got updated to cups-1.7.5-1-x86_64, cups-filters-1.0.55-1-x86_64 and libcups-1.7.5-1-x86_64, respectively. I just tried to print something, but instead of the page that should be printed, my printer, a Samsung ML-2165, printed:
INTERNAL ERROR - Incomplete Session by time out
POSITION: 0x9eee (40686)
SYSTEM: h6fw_5.53/os_hook
LINE: 1353
VERSION: SPL 5.53 07-22-2011
I'm using the Samsung ML-2160 printer driver, which worked flawlessly until recently (note that in the beginning I had problems printing more than 1 job without resetting the printer, as stated in the comments, but this issue magically went away).
I decided to set LogLevel to 'debug' and now my /var/log/cups/error_log reads:
D [04/Aug/2014:17:56:20 +0200] [Job 73] The following messages were recorded from 17:44:25 to 17:56:20
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Unloading...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading attributes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Job restarted by user.
D [04/Aug/2014:17:56:20 +0200] [Job 73] time-at-processing=1407167771
D [04/Aug/2014:17:56:20 +0200] [Job 73] 3 filters for job:
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [04/Aug/2014:17:56:20 +0200] [Job 73] rastertosamsungspl (application/vnd.cups-postscript to printer/Samsung_ML-2160_Series, cost 0)
D [04/Aug/2014:17:56:20 +0200] [Job 73] job-sheets=none,none
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[0]="Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[1]="73"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[2]="****"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[3]="****straat 4 - Google Maps"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[4]="1"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[5]="EdgeControl=Fine number-up=1 JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771"
D [04/Aug/2014:17:56:20 +0200] [Job 73] argv[6]="/var/spool/cups/d00073-001"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[7]="CUPS_STATEDIR=/run/cups"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[8]="HOME=/var/spool/cups/tmp"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/bin:/bin:/usr/bin"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[10]="SERVER_ADMIN=root@dc7800"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[11]="SOFTWARE=CUPS/1.7.5"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[13]="USER=root"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[14]="CUPS_MAX_MESSAGE=2047"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[17]="IPP_PORT=631"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[18]="CHARSET=utf-8"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[19]="LANG=en_US.UTF-8"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[20]="PPD=/etc/cups/ppd/Samsung_ML-2160_Series.ppd"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[21]="RIP_MAX_CACHE=128m"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[22]="CONTENT_TYPE=application/pdf"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[23]="DEVICE_URI=usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[24]="PRINTER_INFO=Samsung ML-2160 Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[25]="PRINTER_LOCATION="
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[26]="PRINTER=Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[27]="PRINTER_STATE_REASONS=none"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[28]="CUPS_FILETYPE=document"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[29]="FINAL_CONTENT_TYPE=printer/Samsung_ML-2160_Series"
D [04/Aug/2014:17:56:20 +0200] [Job 73] envp[30]="AUTH_I****"
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftopdf (PID 4266)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/pdftops (PID 4267)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter /usr/lib/cups/filter/rastertosamsungspl (PID 4268)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started backend /usr/lib/cups/backend/usb (PID 4269)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Restarted by "root".
D [04/Aug/2014:17:56:20 +0200] [Job 73] pdftops - copying to temp print file "/var/spool/cups/tmp/010ab53e725fc"
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loading USB quirks from "/usr/share/cups/usb".
D [04/Aug/2014:17:56:20 +0200] [Job 73] Loaded 68 quirks.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printing on printer with URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
D [04/Aug/2014:17:56:20 +0200] [Job 73] libusb_get_device_list=11
D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: +connecting-to-device
D [04/Aug/2014:17:56:20 +0200] [Job 73] STATE: -connecting-to-device
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer found with device ID: MFG:Samsung;CMD:SPL,FWV,PIC,EXT;MDL:ML-2160 Series;CLS:PRINTER;MODE:SPL5,R0STATUS:BUSY; Device URI: usb://Samsung/ML-2160%20Series?serial=Z7CYB8GCAA003YK
D [04/Aug/2014:17:56:20 +0200] [Job 73] Device protocol: 2
D [04/Aug/2014:17:56:20 +0200] [Job 73] Sending data to printer.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [04/Aug/2014:17:56:20 +0200] [Job 73] Printer make and model: Samsung LaserPrinter
D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for pstops: pstops 73 mk '****straat 4 - Google Maps' 1 'EdgeControl=Fine JCLDarkness=NORMAL PageSize=A4 Resolution=600dpi noJCLSkipBlankPages InputSlot=Auto TonerSaveMode=Save MediaType=None job-uuid=urn:uuid:124f4d31-4e75-303a-5dd2-9da2273f0de5 job-originating-host-name=localhost time-at-creation=1407167054 time-at-processing=1407167771'
D [04/Aug/2014:17:56:20 +0200] [Job 73] Using image rendering resolution 600 dpi
D [04/Aug/2014:17:56:20 +0200] [Job 73] Running command line for gs: gs -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=ps2write -sOUTPUTFILE=%stdout -dLanguageLevel=3 -r600 -dCompressFonts=false -dNoT3CCITT -dNOINTERPOLATE -c 'save pop' -f /var/spool/cups/tmp/010ab53e725fc
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter gs (PID 4275)
D [04/Aug/2014:17:56:20 +0200] [Job 73] Started filter pstops (PID 4276)
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4266 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Page = 595x842; 12,12 to 582,830
D [04/Aug/2014:17:56:20 +0200] [Job 73] slow_collate=0, slow_duplex=0, slow_order=0
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_comments - %!PS-Adobe-3.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] %!PS-Adobe-3.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%BoundingBox: 0 0 596 842
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%HiResBoundingBox: 0 0 596.00 842.00
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Creator: GPL Ghostscript 914 (ps2write)
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%LanguageLevel: 2
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%CreationDate: D:20140804175611+02'00'
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%Pages: 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] %%EndComments
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_prolog - %%BeginProlog
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before copy_setup - %%Page: 1 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] Before page loop - %%Page: 1 1
D [04/Aug/2014:17:56:20 +0200] [Job 73] Copying page 1...
D [04/Aug/2014:17:56:20 +0200] [Job 73] pagew = 570.0, pagel = 817.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageLeft = 12.5, PageRight = 582.5
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageTop = 829.5, PageBottom = 12.5
D [04/Aug/2014:17:56:20 +0200] [Job 73] PageWidth = 595.0, PageLength = 842.0
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1 pages...
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4276 (pstops) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4275 (gs) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4267 (/usr/lib/cups/filter/pdftops) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 158 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 158 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 519 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7963 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7963 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4901 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4901 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 4442 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 4442 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 8192 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 1679 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 1679 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read 7846 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Wrote 7846 bytes of print data...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Samsung_ML-2160_Series: spl2.c:1322: RenderGDI: Assertion `ul_comp_size < ul_band_size' failed.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Sent 44411 bytes...
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4268 (/usr/lib/cups/filter/rastertosamsungspl) crashed on signal 6.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Hint: Try setting the LogLevel to "debug" to find out more.
D [04/Aug/2014:17:56:20 +0200] [Job 73] Waiting for read thread to exit...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Read thread still active, aborting the pending read...
D [04/Aug/2014:17:56:20 +0200] [Job 73] Resetting printer.
D [04/Aug/2014:17:56:20 +0200] [Job 73] PID 4269 (/usr/lib/cups/backend/usb) exited with no errors.
D [04/Aug/2014:17:56:20 +0200] [Job 73] End of messages
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state=3(idle)
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-message="Filter failed"
D [04/Aug/2014:17:56:20 +0200] [Job 73] printer-state-reasons=none
(I wiped out some confidential information)
Notice the failure of the RenderCGI assertion, likely causing the crash of rastertosamsungspl. I searched on the net, but didn't find a solution. However, I remembered that the CUPS packages were updated a few days ago and I manually downgraded to the previous releases. This solved the problem for now.
Can someone see what's changed in the last release, especially regarding communication with a printer driver?

Some older servers don't know what to do with unknown extensions. They are supposed to ignore them, but some actually close the connections with an error. By encapsulating, you are essentially stripping off any extensions because there is no such thing in the SSLv2 format. Suggest upgrading server if possible.

Lpr printing fails

Similar Messages

Maybe you are looking for