LR Enfuse Problem - Batch Processing Doesn't work
Hi,
I'm relativley new to Lightroom - and am trying to learn about Enfusing multiple different exposures.
I've followed all the instructions to the letter, and I'm able to enfuse great looking shots if I do them 1 group at a time. However, I've taken heaps of bracketed shots, and want to 'Batch Process' them.
LR/Enfuse appears to have the functionality, and plenty of people online seem to be able to make it work. But even when I stack each bracketed shot, and select all. It still comes up with the error message below:
"No Stacks
No Stacks containing selected photos were found. If you are trying to blend the selected images then please turn off the batch mode option."
Any ideas? I'm using Lightroom 5.2
Cheers, Thomas
Hi,
I am not sure what operating system you are using, I don't have any problems with Win 7 x64, but if you are using Apple OS there may be issues with permissions on the folders you are using e.g. the folder for temporary files.
You may also want to look at his tutorial http://digital-photography-school.com/save-time-with-batch-exposure-blending but disregard the Auto Stacking explained as it is difficult to get it to work.
I am not sure but it looks as though the stacks in the image you posted are expanded. Make sure the individual stacks are collapsed.
Apart from that I just don't know as it works fine for me.
Similar Messages
-
Batch process does not work in one service, but worked in another.
Hi Fellows,
We have here a batch process with a code encrypted, that runs daily in a production environment.
Tonight this batch process did not work.
It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
Here is the tnsnames that the batch process uses:
bat =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bat)
(FAILOVER_MODE =
(BACKUP = dba)
(TYPE = NONE)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 5)
dba =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dba)
Do you guys know what could be the reason?
Thanks in advance.We set the service which the app should connect.
These services are set in srvctl:
ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
ora.cms.bat.cs ONLINE ONLINE on fastora1
ora.cms.cms1.inst ONLINE ONLINE on fastora1
ora.cms.cms2.inst ONLINE ONLINE on fastora2
ora.cms.cms3.inst ONLINE ONLINE on fastora3
ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
ora.cms.db ONLINE ONLINE on fastora1
ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
Connected to DB [issr@bat ]
PAYware CMS Version 8.0 - Module : E352 Release : 000000002
Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
Release: 2
PARAMETERS OK !!!
NUMBER OF PROC.: 000001
Number of transactions : +000047570
Number of parallel processes: 000001
Transactions by process: 000000000000047570
Transactions Processed: 000010000 -
Batch processing does not work with action
Here is the thing. I have implementes several action on Photoshop. SOme of the include several sub actions and different saving locations. For example, I open a file, then I hit my prefered key combo for that action, and I have:
1) convert to cmyk
2)save copy as JPG with 11 quality level
3) save to folder A
4) image size to 72 dpi
5) covert to RGB
6) save as JPG 6 quality level
7) save to folder B
8) close file and discard cahnges.
Everything runs like heaven, but the moment I want to batch several files everything stalls.
I choose file > Batch > Choose my set > choose my action
Source > I choose where my files are (usually a PDF)
then I use "Supress file open options dialogs"
Destination> Since I already have set destinations y my actions, I choose here a "dump" folder
On errors > I hit Save As... and put a name for that log.
Then photohop opens my PDF on Photoshop and does nothing! It keeps my file open.
I m gettting frustated here, because I ma about to work with 400 files to batch, and this batch system does not work.
I am using CS6
Any cluesYour action doesn't to seem to include any Open actions. Why do you have the "Supress" option enabled?
Also, since your action has the two save commands, you would just leave the Destination set to None. Setting a Destination means that is going to save the files again.
The problem you'll run into though is that the action also saves the file name as part of the action, so that you'll end up just saving over the one file each time the action is played back on your 400 files. So Photoshop will process all the files, but each time it will overwrite the first file, so you'll end up with one file in each folder. Normally, in these situations, you'd use the Destination setting and use the "Overrride Action "Save As" Commands", which would substitute the Destination folder for whenever a Save command is used. The problem here is that you can only choose a single destination folder, so all files would be saved to the same location.
Short of scripting this, it may be best to break this into two separate actions. -
Leave to list-processing doesn't work
Hi 2 all!
I have a problem with LEAVE TO LIST-PROCESSING. I have developed a module pool (type M) and screen with the screen painter of type Normal. Now I want to go to the report from my screen with LEAVE TO LIST-PROCESSING, but it doesn't work. I am trying to do this when the button is pressed ( at my application status). The operation is performed but then the Init_screen_xxxx module is called again. Highly appreciate your help.Hi Nata
Yes U can do it.
We go from module pool program to report program and vice-versa.
1. From report to screen (transaction)
Call transaction
Leave to list-processing and return to screen
2. From screen to list (report)
we can write a report program for fuction key available in the screen.
for example.
case sy-ucomm.
when 'fctcode'.
select .......... from tabl into ..
write:/.........,
endcase.
reward if useful. -
Problem batch processing in CS2, CS3 and CS4e
I have all the above named programs and have tried unsuccessfully to get the batch process to work. I currently run it in CS with no problems. We want to upgrade to CS5e and actually be able to use it to process our web gifs without constantly going back to the old version.
I have an action set up with the following steps:
Start Record
Open File
Save for Web - Set Width to 150 pixels - Apply - Save (I select a folder called 150)
I repeat process for a 300 pixel image.
Close the file
Stop record.
Go to batch process:
Choose Action
Select Source Folder
Override Action "Open" Command is checked
Choose Destination Folder (150 from above)
I select OK.
This runs fine in PS CS and no matter how many files I have in the source I end of with the same number in both the 150 and 300 folder I have created, named correctly and in the correct 150 or 300 pixel width I need as gif files.
I repeat the same procedure in CS2, CS3 or CS4e and all I get is a folder with one image in it when done. the batch runs and you can see it opening files but it just constantly overwrites the original file.
I have tried to check other boxes such as the Override Action Save As Command and other things I have found on these forums but nothing is working.
I even called Adobe and was on the phone for 99 minutes and let them view my desktop while I ran the procedure in both PS CS and PS CS4e and they were stumped. I was told they would pass it on to supervisors and someone would call me back. I called back after a week since I had not heard from anyone and was told my call was recorded as a mis-dircted call and they had no record.
If someone could please help I would really appreciate it. I have spent the last three evenings combing websites and watching videos to no avail.
Thanks in advance.Thanks, but I have checked all those and am using the same settings from program to program without success. It always work
s in PS CS. -
Bridge - Batch Processing has stopped working...help
I am using Photoshop for Windows in CS2. Have been for years. Work with batch processing and Web Gallery all the time...for years.
Batch Processing and Web Gallery stopped working (along with other Photoshop features). I upgraded to Windows 7, and photoshop/bridge/indesign, etc work once again.
Batch Processing and Web Gallery still don't work. When I select items Bridge and click "Tools", "Photoshop", "Web Photo Gallery" it clicks over to photoshop, as if the process is about to begin. But then Photoshop lies there doing nothing. No action menu pops up if I select "Batch" no "Web Photo Gallery" dialog box initiates if I select the gallery.
Any assistance, that can save me the $1000 on a CS upgrade, will be greatly apprecieated.
Thank you for your time.Look in edit/preferences/scripts and make sure there is a checkmark for both Bridge and Photoshop. Without that they can't talk.
-
Outlook 2007 - Automatic processing doesn't work unless logged in
Hi guys,
I'm working with an equipment mailbox in an Exchange 2007 / Office 2007 and am having some difficulty getting it to work properly.
Basically, I've set the equipment mailbox up appropriately and have checked all three of the 'Resource Scheduling' tasks to automatically accept meeting requests and process cancellations as well as to decline conflicting and recurring meeting requests
As long as I am logged in 'as' the user account of the equipment mailbox (for example, 'PipetteBalance') meeting requests are processed automatically from my own account (and other users)
However, as soon as I log out of the PipetteBalance account the automation halts until I log back in to it again (and thus connect to Exchange via Outlook)
I've disabled cached exchange mode and have forced the 'AutoAccept' powershell cmdlet against the mailbox to no avail
Even adding the mailbox as a shared mailbox doesn't work. I have to log in as the account directly and have an 'active' connection with Exchange for the automation to work
This is the full list of properties set against the equipment mailbox:
AutomateProcessing : AutoUpdate
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : True
DisableReminders : True
AddOrganizerToSubject : True
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
ResourceDelegates : {}
RequestOutOfPolicy :
AllRequestOutOfPolicy : False
BookInPolicy :
AllBookInPolicy : True
RequestInPolicy :
AllRequestInPolicy : False
AddAdditionalResponse : False
AdditionalResponse :
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : True
ProcessExternalMeetingMessages : False
DefaultReminderTime : 15
RemoveForwardedMeetingNotifications : False
Is there something I may have overlooked or not set up properly?
Thanks,
AdamHi,
Please try to use Windows Search to search for words or phrases that you expect to find in email messages. In this way, we can determine if Outlook data is being indexed.
If no results were returned, please try to search other files (not Outlook emails) with Windows Search to check if the Windows search feature is broken. If so, we can try to reinstall the Windows search feature to check if it helps. To do this, please follow:
1. Go to Control Panel > Programs > Turn Windows features on or off.
2. Untick "Windows Search".
3. Press OK and wait until the installer is finished.
4. Reboot your computer.
5. Repeat steps 1-3 to enable it again.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support -
Hello all,
I created the following PLSQL Trigger but it doesn't work as it should.
If there is a change in the colomn "stunden" in table cn_pl_std_peplanung, the trigger should write the attributes (pl_id, l_art_id, pe_id, idee_id, abt_id, version_id) from cn_pl_std_peplanung into the table cn_pl_aenderungen.
The problem is that this trigger doesn't just write the row where attribute "stunden" was changed into cn_pl_aenderungen, it writes all rows into cn_pl_aenderungen where the attributes (pl_id, l_art_id, pe_id, idee_id, abt_id, version_id) are matched. I just need the row where attribute "stunden" was changed. cn_pl_aenderungen is a table to log the changes made on cn_pl_peplanung.
I hope you understood the problem... :-)
create or replace trigger "CN_PL_STD_PEPLANUNG_T1"
AFTER
insert or update on "CN_PL_STD_PEPLANUNG"
for each row
DECLARE
pragma autonomous_transaction;
cursor c_peplanung(in_stunden number)
is select pl_id, l_art_id, pe_id, idee_id, abt_id, version_id, stunden FROM cn_pl_std_peplanung
WHERE stunden = in_stunden;
rec_plan c_peplanung%rowtype;
BEGIN
OPEN c_peplanung (:old.stunden);
LOOP
FETCH c_peplanung INTO rec_plan;
exit when c_peplanung%NOTFOUND OR c_peplanung%NOTFOUNd is Null;
IF rec_plan.stunden != :new.stunden THEN
INSERT INTO CN_PL_AENDERUNGEN (l_art_id, pe_id, idee_id, version_id, benutzer, datum)
VALUES
(rec_plan.l_art_id, rec_plan.pe_id, rec_plan.idee_id, rec_plan.version_id, v('APP_USER'), sysdate);
COMMIT;
END IF;
END LOOP;
CLOSE c_peplanung;
END;All you need is just this
CREATE OR REPLACE TRIGGER CN_PL_STD_PEPLANUNG_T1 AFTER INSERT OR UPDATE ON CN_PL_STD_PEPLANUNG FOR EACH ROW
BEGIN
IF :NEW.student != :OLD.student
THEN
INSERT INTO CN_PL_AENDERUNGEN (l_art_id, pe_id, idee_id, version_id, benutzer, datum)
VALUES (:NEW.l_art_id, :NEW.pe_id, :NEW.idee_id, :NEW.version_id, v('APP_USER'), sysdate);
END IF;
END;Don't use ATONOMOUS_TRANSACTION. You dont want to log if nothing happens to the Main table right? Think what happens if the main transaction rolls back.
Note: Code not tested. -
Page level process doesn't works for tabular form.....
I am developing an application on inventory of an chemical factory.......
I have an master-detail form where detail table is in tabular form.......
I have an LOCATION1 AND QUANTITY1 COLUMN in detail table..........
I have location say...LT01A02 AND limit of each location to hold an quantity is .....say 1000.
I wrote an process for these but it doesn't work.......
declare
x NUMBER(6);
z number(6);
begin
selecT NVL(SUM(QUANTITY1),0) INTO x from RM_LOCATION1 where LOCATION1 = :P3_LOCATION1;
z := x;
if :P3_LOCATION1 LIKE'%1)' or :P3_LOCATION1 LIKE'%2)' then
if z > 1200 then
raise_application_error(-20101,'LOCATION YOU HAVE SELECTED IN LOCATION1 IS 1ST OR 2ND PALLETE ,WHICH CAN HAVE MAXIMUM 1200KG,PLEASE CHECK IT PHYSICALLY');
end if;
elsif :P3_LOCATION1 LIKE'%3)' or :P3_LOCATION1 LIKE'%4)' then
if z > 800 then
raise_application_error(-20101,'LOCATION YOU HAVE SELECTED IN LOCATION1 IS 3RD OR 4TH PALLETE ,WHICH CAN HAVE MAXIMUM 800KG,PLEASE CHECK IT PHYSICALLY');
end if;
elsif :P3_LOCATION1 LIKE'%5)' or :P3_LOCATION1 LIKE'%6)' then
if z > 750 then
raise_application_error(-20101,'LOCATION YOU HAVE SELECTED IN LOCATION1 IS 5TH OR 6TH PALLETE ,WHICH CAN HAVE MAXIMUM 750KG,PLEASE CHECK IT PHYSICALLY');
end if;
elsif :P3_LOCATION1 LIKE'%7)' or :P3_LOCATION1 LIKE'%8)' OR :P3_LOCATION1 LIKE'%9)' or :P3_LOCATION1 LIKE'%10)' OR :P3_LOCATION1 LIKE'%11)' or :P3_LOCATION1 LIKE'%12)' then
if z > 600 then
raise_application_error(-20101,'LOCATION YOU HAVE SELECTED IN LOCATION1 IS 7TH OR 8TH OR HIGHER PALLETE ,WHICH CAN HAVE MAXIMUM 600KG,PLEASE CHECK IT PHYSICALLY');
end if;
end if;
end;
I HAVE SEEN THAT APEX DOESN'T PICKS VALUE CALLED... _:P3_LOCATION1_*
NOW WHAT TO DO ,CAN ANY ONE HELP ME....HOW TO RUN THESE PROCESS......Hi User XY,
tabular forms do not have Page Items. The values you entered in the tabular form are stored in arrays like APEX_APPLICATION.g_f01 to g_f50.
Here are some links you might find helpful: http://www.talkapex.com/2008/07/manually-creating-tabular-form.html
http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21676/apex_app.htm#CHDICJDA
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at and http://www.wirsindapex.at -
Batch Processing doesn't update files in Premiere Pro CS5.5
Hi,
I'm not sure if this question should be under 'Audition' or 'Premiere Pro', but I'm selecting a large range of audio clips (from a wedding ceremony) and sending to Audition from Premiere (selecting 'Edit in Adobe Audition')
When the clips appear in the files section of Audition I select 'Batch Process', drop them in and make the batch process start. When everything is finished and the files are automatically saved, I head over to Premiere to see if the wav's have updated - but nothing. Everything is exactly the same.
Any help would be great?
I'm not adding any prefix's etc to the filename, and I'm selecting 'overwrite existing files' and 'same location as original files'.
Cheers,
ThomasHi Durin,
Sorry for the delay, had a couple of deadlines to meet and ended up doing the hundred-or-so clips one-by-one in audition to get it done.
That's the issue exactly, I go back to Premiere after doing the batch process (and they all auto-save) but Premiere doesn't update the waveform or in fact the audio doesn't show the changes I've just made. The strange thing is that if I do them one by one, then Premiere recognizes the changes and I can get on with it.
The steps I take are: 1) Drop the clip in the timeline, do a bunch of editing (occasionally nesting and multi-cam editing a sequence). 2) Right click and Edit in Audition 3) Open Batch Process in Audition 4) Drag drop all the files just sent to Audition from Premiere, into the Batch Process section 5) Run batch process 6) Go back to Premiere and see if it's updated in the timeline. I wait, and wait, but nothing. Everytime.
I'm thinking it's something simple I've clicked, but have no idea what. Either that or it's some sort of bug issue.
I will be upgrading to CS6 creative cloud soon, hopefully that'll fix it.
If you have any ideas, I'd love to hear them. Otherwise, thanks for trying. -
Weird problem: apple-F doesn't work in Finder anymore!
I've just noticed 2 really weird problems. When in Finder, hitting apple-F (to "Find") doesn't work - I see the File menu blink for a second but the window to search for files never comes up. Also (and perhaps related?), since the latest set of Apple upgrades, when I run iTunes, it doesn't see my library. The newest version runs, but never brings up its main window. The older version does bring out its window but my music doesn't appear there. What the heck is going on?!? Anyone have any suggestions? Thanks,
MikeWell, first, the likely fix for your Command-F problem (and other problems you've probably been lucky enough not to stumble upon just yet) is to fix permissions. But you'll probably find you can't do that in the first place until you do the main fix discussed in that large thread.
Join the crew.
owen -
Batch processing: Action not working - Photoshop CC
I've created an action to apply a watermark. I want to apply this to a folder of jpeg pics.
I've gone to:
File>Automate>batch - see pic below
I ok this.
The batching looks as though it's taking place since I can see it running through the steps of the action. But when finished, nothing has changed.
I've also tried changing the 'Destination' to 'Folder' and using '4 digit serial number + extension' but this doesn't work either.
Many thanks for help in advance.
PS. I've tried using File>Scripts>Image processor and this works. Why this and not Batching?Your terminology seems to be pretty jumbled.
Please focus one one issue/tool for now and post a screenshot/s with the pertinent Panels (Layers, Channels, Options Bar …) visible. -
LMS25 / Common Services 3.0 problem (dbpasswd.pl doesn't work)
Hi.
During CS3.0 installation I got an error:
ERROR: Unable to Change password for DSN cmf
ERROR: After install you can change the database password
ERROR: by running /opt/CSCOpx/bin/dbpasswd.pl
I tried to run /opt/CSCOpx/bin/dbpasswd.pl script, but got error again:
bash-2.03# /opt/CSCOpx/bin/dbpasswd.pl all
Please enter the new password for database cmf:
Please enter the new password again for verification:
INFO: Start changing password for database 'cmf'...
Starting database engine cmfEng
ld.so.1: perl: fatal: relocation error: file /opt/CSCOpx/objects/db/lib/libdblib9.so.1: symbol UnixForkProtection_Init: referenced symbol not found
Killed
I tried to set up LD_LIBRARY_PATH, tried to remove .profile, tried even to install solaris 8 from the scratch. It doesn't work even on fresh installation with 8_Recommended and all required Solaris patches. I tried also different installation disks with May 05 patches and without.
ldd doesn't show anything strange:
bash-2.03# ldd /opt/CSCOpx/objects/db/lib/libdblib9.so.1
libdbtasks9.so.1 => /opt/CSCOpx/objects/db/lib/libdbtasks9.so.1
librt.so.1 => /usr/lib/librt.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libc.so.1 => /usr/lib/libc.so.1
libxnet.so.1 => /usr/lib/libxnet.so.1
libm.so.1 => /usr/lib/libm.so.1
libaio.so.1 => /usr/lib/libaio.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/SUNW,Sun-Fire-V440/lib/libc_psr.so.1
libsocket.so.1 => /usr/lib/libsocket.so.1
bash-2.03#
We have same LMS 2.5 on another server ( same model, same operating system, same patches) and it looks fine.
Could somebody explain how to debug and solve this issue?Hi.
Also /opt/CSCOpx/selftest/database.pl didn't work with same error message.
I found the cause of problem. I have reproduced this error in test environment. The problem was in 8_Recommended patch cluster for Solaris 8. Patch cluster downloaded in September doesn't cause any errors, but after new patch cluster installing ( late October) CiscoWorks stops working. The reason for it is 109147-39 patch ( linker patch for Solaris). Older version 109147-37 doesn't cause an error in database manipulation. It is enough to run roll back this patch and 2 patches depended on it ( 108652-92, 108773-19). So command "patchrm 108652-92;patchrm 108773-19;patchrm 109147-39" solves the problem. -
CS5 Batch Processing Photo Editing work flow
I am relatively new to CS5 and I am intested in automating the correct gross photo editing work flow process [ie., levels contrast, color , noise, sharpening etc] once I have made RAW corrections for each photo.I hope this is as simple as refering me to a tutorial
TankNot sure exactly your are looking for, a template or an action to apply to other images. In Bridge/tools/photoshop there are a number of options. The image processor is quite powerful. There is also the option to make a metadata template to apply settings to other images.
Do a google search for batch process edits Bridge and see what suits your fancy. -
FileXtra4 problem - default folder doesn't work.
Don't know why this doesn't work, but the default folder
setting in the
FileXtra open/save dialogues doesn't seem to work as
advertised. My code
goes like so:
currentLevel = fxObj.fx_FileOpenDialog(the moviePath &
"\Levels\","*.lvl","Load Level",False,True)
the moviePath & "\Levels\"
should be the correct folder, but instead, it always defaults
to My
Documents for some reason. (When running as a projector. In
Authoring
mode, it defaults to the moviePath, but ignores my
sub-folder.) Either way,
it never gets it right the first time. The second time and
subsequent
times, it always goes to wherever you last opened something,
but the first
time is always wrong. I did notice that the example in their
documentation:
put fxObj.fx_FileOpenDialog("C:\My Documents\", "Text
Files/*.TXT","Choose a
text file", True, True)
does use My Documents as its default, but I've changed that,
so it should be
going to the folder I pointed it at.Without looking too deeply, I think I remember that, yes, it
doesn't work.
I usually end up using BuddyAPI for this.
Craig
"Darrel Hoffman" <[email protected]> wrote in message
news:fm362a$ep7$[email protected]..
> Don't know why this doesn't work, but the default folder
setting in the
> FileXtra open/save dialogues doesn't seem to work as
advertised. My code
> goes like so:
>
> currentLevel = fxObj.fx_FileOpenDialog(the moviePath
> "\Levels\","*.lvl","Load Level",False,True)
>
> the moviePath & "\Levels\"
> should be the correct folder, but instead, it always
defaults to My
> Documents for some reason. (When running as a projector.
In Authoring
> mode, it defaults to the moviePath, but ignores my
sub-folder.) Either
> way, it never gets it right the first time. The second
time and
> subsequent times, it always goes to wherever you last
opened something,
> but the first time is always wrong. I did notice that
the example in
> their documentation:
>
> put fxObj.fx_FileOpenDialog("C:\My Documents\", "Text
Files/*.TXT","Choose
> a text file", True, True)
>
> does use My Documents as its default, but I've changed
that, so it should
> be going to the folder I pointed it at.
>
Maybe you are looking for
-
ISE VPN Posturing NAC Failing to initialize
My customer is experiencing intermittent VPN issues in which the NAC agent will not pop-up upon connecting to the VPN. It works fine on the LAN however. The problem is not experienced by everyone. for example, it never happens to me, and has never
-
Will only print one page of four page document
I have an HP LaserJet M1212nf and it will only print the first page of a four page document. I tried to check the preview settings and inserted "pages 1 to 4" and print "all", but neither works. What to do?
-
Three Finger Swipe to change Spaces
Hi, I was wondering if there's any way to set up my macbook air to change spaces using a three finger swipe in the finder. I know I can use a three finger swipe to go forward and backward in safari as well as do some other things and I want to be abl
-
Diffrence betwn. - TAXINN and TAXINJ
Hi All, Whatz the difference between TAXINJ and TAXINN If I use TAXINN no need to maintain different, different Tax codes is this correct? Regards, MS
-
Quality Intergrtion with other Modules
Dear Gurus, I have activated quality inspection for all the incoming raw material. GRN is carried out in two step i.e.103+105. At 105 inspections lot are generated. 1. When the Material is accepted what is effect on the MM+FI Module? 2. When