Lsdaq doesn't list any card but i have one in the system.daqmx installed ok.
I have installed Daqmxbase8 in my RHEL5 system.All installation went ok.After restarting the machine while running lsdaq, i have seen it not displaying any NI boards.But I have ,
one NI4461 card, which is listed in 'lspci command ' , as Unknow device fronm NI.Why lsdaq is not giving any listing?
more data... well I tried various BIOS settings (after borrowing a keyboard that could get into BIOS) but it doesn't look like it's a BIOS issue alone. it looks that at some point the system GRUB might be involved.
it looks like as soon as both kingstongs are in only one gets recognised by the BIOS. when I stick in the no name Chinese USB I can choose in BIOS the boot priority of the two. probably Toshiba would also provide such an options. so I guess I need to get a Toshiba or something and then set it up as secondary boot?! but why won't it work with 2 Kingstons?
By the way can I sue 64 GB FAT USB 32 to do system backups with rdiff-backup? I am guessing that not but I am not sure if backups get compressed - do they keep the file ownership and permissions?
I tried various options (removed all flags from Kingston, reformatted it as fat32) - Kingston 8GB is where the OS is installed - google docs sheet of results:https://docs.google.com/spreadsheets/d/1IzcvabodrpaQKqiZDT0rPhBfn2DSutcCRCerWOVc0DE/edit?usp=sharing
Similar Messages
-
Hi, I am trying to install 4 Adobe apps onto a new iMac but Apps in Creative Cloud doesn't list any apps but says there is a download error and to contact customer support.
I can sign in fine with my username and password.
RickHi daveforrestaid,
Please refer to the threads below where this issue has been addressed:
1. Creative Cloud "Download Error" message
2. Creative Cloud - Download error - stubborn error
Regards,
Sheena -
We are using SharePoint 2010 and Excel 2010. In SharePoint, we have created a custom content type that uses an Excel workbook template along with a Document Information Panel (DIP -- an InfoPath form) that always displays when a workbook of this custom
content type is opened. That's all working fine. However, if one of those Workbooks is open with the DIP displayed and the user opens another Excel workbook, a DIP displays for the 2nd workbook even if it's just a regular workbook,
i.e. not one of the custom content type. If the user closes one of the DIPs, both close. And if the user displays one of the DIPs again, both display.
Is there any way to separate out the DIP display for specific workbooks during the same Excel instance so that it shows in one but not in the other? Or is this just something we have to live with (and train our users on)?
Thanks in advance. Carol.Whether the DIP shows or not is a client side toggle, not something tied to an individual workbook. So if you are using the same client instance then the DIP will display or hide based on what you did in the other workbook. YOu might be able
to create a macro that would display or hide it, but that's a lot of work for little advantage. I would train the users and live with it.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
How do I get the code to download the software???
if you purchased a cc subscription, download the cc desktop app, https://creative.adobe.com/products/creative-cloud
and use the app to install your programs.
otherwise:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
HT3702 apple is decline all my purchases with my master card but i have money on the card
tried to purchase some apps like fifa 14 and bolt in temple run 2 and apple decline my purchase. that i should contact apple.com.support/ww
If you are getting a message to contact Support then have you done so ? If not then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why you are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
What sort of MasterCard is it ? If it's a debit card then I don't think that they are still accepted as a valid payment method.
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? And have you checked to see if it's your card issuer that is declining it ? -
Is it possible to have multiple lines on a phone but only have one of the number ring on that phone?
I have a client who has four number on his phone. Extension 4709 is the clients number. He also has 4715,4725 and 4712 on his phone. Is it possible to make it so only 4709 will ring on his phone? The client is running CME 10.0
New here and new CME so any help would be greatly appreciatedHi Joseph,
This would be configured using the "button" (s=silent separator) command;
From;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/cme_b1ht.html#wp1050318
Cheers!
Rob
button
To associate ephone-dns with individual buttons on a Cisco Unified IP phone and to specify line type or ring behavior, use the button command in ephone configuration mode. To remove an ephone-dn association from a button, use the no form of this command.
button button-number {separator} dn-tag [,dn-tag...] [button-number{x}overlay-button-number] [button-number...]
no button button-number {separator} dn-tag [,dn-tag...] [button-number{x}overlay-button-number] [button-number...]
Syntax Description
button-number
Number of a line button on a Cisco Unified IP phone that is to be associated with an extension (ephone-dn). The maximum number of button-ephone-dn pairs is determined by the phone type. Note The Cisco Unified IP Phone 7910G has only one physical line button, but you can assign it two button-ephone-dn pairs.
separator
Single character that denotes the characteristics to be associated with this phone button. Valid entries are as follows: •: (colon)—Normal ring. For incoming calls on this extension, the phone produces audible ringing, a flashing icon in the phone display, and a flashing red light on the handset. On the Cisco IP Phone 7914 Expansion Module, a flashing yellow light also accompanies incoming calls. •b—Beep but no ring. Audible ring is suppressed for incoming calls, but call-waiting beeps are allowed. Visible cues are the same as those described for a normal ring. •c—Call waiting. Provides call waiting for secondary calls to an overlaid ephone-dn. See also the o keyword. •f—Feature ring. Differentiates incoming calls on a special line from incoming calls on other lines on the phone. The feature-ring cadence is a triple pulse, as opposed to a single pulse for normal internal calls and a double pulse for normal external calls.
•m—Monitor mode for a shared line. Visible line status indicates whether the line is in-use or not. Monitored lines cannot be used on this phone for incoming or outgoing calls. •o—Overlay line. Multiple ephone-dns share a single button, up to a maximum of 25 on a button. See also the c keyword. •s—Silent ring. Audible ring and call-waiting beep are suppressed for incoming calls. The only visible cue is a flashing ((< icon in the phone display. Note In Cisco IOS Release 12.4(4)XC and later releases, the silent ringing behavior is overridden during active night-service periods. Silent ringing does not apply during designated night-service periods when the s keyword is used. •w—Watch mode for all lines on the phone for which this directory number is the primary line. Visible line status indicates whether watched phone is idle or not.
dn-tag
Ephone-dn tag that was previously defined using the ephone-dn command. When used with the c and o keywords, the dn-tag argument can contain up to 25 individual dn-tags, separated by commas.
x
Separator that creates an overlay rollover button. When the overlay button specified in this command is occupied by an active call, a second call to one of its ephone-dns will appear on this button. This button is also known as an overlay expansion button.
overlay-button-number
Number of the overlay button that should overflow to this button. -
I installed iphone 5 from itunes back up and get a pop up [ ! ] app not installed can not find file. I have looked through everything that have with "CANADA" in the app title. That is the only info there is.
If you haven't found out which app it is then if you go into list view in the Apps part of your library do any of the apps have an exclamantion mark against them ? If they do then they are the one(s) that iTunes can't find the actual app file(s) for - if you delete that app from your library then if it is still in then you should be able to re-download it via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes, or you can just download it directly on your phone via the Purchased tab in its App Store app
-
I have os 10.5.8 software on my mac and I need to update the software on my mac so I can update my iphone 4s, every time I try to update my mac with the 6.0 it says it doesn't need any updates, but my mac still has 10.5.8.... any help?? Please...
You must first buy Snow Leopard from Apple: 800-MY-APPLE (in the US)
Make sure your system meets Snow Leopard's requirements:
Mac OS X 10.6 "Snow Leopard" System Requirements
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools -
I currently have 57 songs listed under downloads and all have been in the processing stage. I have already been charged but cannot get the song to finish. Any suggestions?
Hi Little Orchard,
Welcome to the Support Communities!
Are you downloading to a computer or an iPhone, iPad or iPod Touch? I would first suggest signing out of the iTunes Store and restarting your computer or device. Then log in and look for your purchases again. If you are still not able to access your content the article below will get you connected with the iTunes Store Support.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
- Judy -
my iPhone 5 doesn't send any text messages or i messages and the problem isn't with the sim card as i tried it with another iPhone 5 and it worked fine.
OK. Thanks for sharing.
Have a nice day. -
I use my credit card every time but this time it say disline But I have money in the card? And I don't have any other card
Hello Ismailbusherin,
From what I can gather, you are receiving a message stating your payment is being declined. You may want to revisit the payment information associated with your Apple ID to make sure the data is correct:
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Audition CS6 doesn't seem to recognize that I have a 5.1 system while mapping channels. Any ideas?
Hi there everyone. I'm trying to mix in 5.1 surround sound. I started a project and set it to 5.1, and I can edit everything just fine. The problem is that I can't monitor my results, because Audition doesn't seem to recognize that I have a 5.1 system (Logitech Z-5500 5.1 Digital) hooked up via 6-channel direct. It's not recognizing more than two channels. Does anyone know what's going on?
I have an Alienware M17x-R4 laptop running Win 8 Pro 64-bit. My sound card is a Creative Sound Blaster Recon3Di.
Here's what my preferences look like.GrizzlyAK wrote:
I think there is something else going on.
I think you're correct, although I can understand entirely why ryclark said what he did - there are at least two reasons! Firstly, Creative Labs have history with piss-poor driver software (and hardware), and secondly (as an extension of this), it's quite normal for a lot of sound device manufacturers to provide only the minimum MME requirement as far as Microsoft is concerned - and that's just a two channel stereo output.
MME is obviously quite capable of supporting multichannel devices, albeit at higher latency values. If you are looking at just a playback situation though, this doesn't really matter. What may have happened here is that the driver software on your machine, and on the OPs, are simply at different version levels, and that all that's required is for the OP to update it.
For anybody serious about this though, I'd still recommend upgrading to an external sound device as any internal device, whoever made it, is inevitably going to be compromised in terms of performance. There are several reasons for this, but primarily they are too close to a load of digital noise within the machine, and this limits their signal to noise ratio. External devices are a lot better from this point of view, and usually you aren't limited by ridiculously flimsy 3.5mm jack connectors either. And inevitably, internal sound devices are built down to a price, not a performance point - not so good. -
I cant create account because i dont have credit card but I have ipod touch and I need it to download free games and other stuff.Is there any option i can write i dont have any credit card?
Sorry abaot my englishHi...
Click None in the Payment Information window.
Instructions for either using your iPhone or a computer > Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
When logging into iCloud in Safari, Calendar doesn't display any events. They are displayed on the iPad, iPhone on even the iCal. What is wrong ?
:S,
Sorry, missed that fact. My memory is good, but short.
Try moving the "Calendar Cache" file to your Desktop. Quit iCal, and find the "Calendar Cache" file in your Macintosh HD/Users/yourusername/Library/Calendars. Move that file to your Desktop. After that, (I remember that I recommended this before), as long as you are moving files to the Desktop, repeat the plist removal procedure once again, log out/in or restart.
You should also consider removing the "To Do's" from Mail before restarting iCal. When you open iCal turn off "Show Birthdays calendar" in iCal>Preferences...>General.
Are you syncing any data? If so, what method(s) are you using?
;~) -
I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.
Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.
Maybe you are looking for
-
Hello, In the new requirements, i need to set up mail to proxy scenario in sap PI. The mail comes in with a txt attachment. I can set up a sender mail adapter to fetch the mail and attachment. There are 5 columns in this file attachment. I need to re
-
Hi I have JDBC-RFC-JDBC Scenario.Now i have complated JDBC-RFC part but for the RFC response i dont want to use BPM . We are on PI 7.0 SP 11 . What changes needs to be done in module level to achieve this . Regards Vijay
-
Dear all. I have some question for using MD09 to peg initial reservation. I have 3 production order at the same day. Run MRP and the system will generate only one purchase requisition for 3 production order. I'm in progress by convert PR to PO, good
-
How do I know Firefox has the latest phishing/attack database?
I want to make sure that the phishing database is up to date, because my firewall or sandbox might be blocking it.
-
Hi.... Do any of the BusinesssObjects applications support the generation of statistical process control (SPC) charts like x-bar charts and histograms? Which one.... I need a software application that can pull data out of a MS SQL 2005 database and