LSMW Create Batch Input Session

Hi all
when I use LSMW to upload data. every step is OK, but at the NO. 13 step ' 13 Create Batch Input Session', it always set the 'Display Trnacts per BI Folder' field a default value '1' .I must clear the defautl value and let the field to black so I can create ONE session.
why it always set a default value '1' in the 'Display Trnacts per BI Folder' field ??
anybody can help me?

It shows the no. of transactions covered in a particular session. Like if you have 1000 records in your load file and if u put 500 transactions as value then it will create 2 sessions of 500 each. And if you leave it blank then by default also it will create 1 session......
Best Luck,
Ravin

Similar Messages

LSMW Create Batch Input Session question

Hi all
when I use LSMW to upload data. every step is OK, but at the NO. 13 step ' 13 Create Batch Input Session', it always set the 'Display Trnacts per BI Folder' field a default value '1' .I must clear the defautl value and let the field to black so I can create ONE session.
why it always set a default value '1' in the 'Display Trnacts per BI Folder' field ??
anybody can help me?
thanks a lot!!

Hi,
=> Looks like you havent mentioned the TCODE that you are using whilst recording. There is a field specific to TCODE in the step 'Maintain Field Mapping and Conversion Rules'. Double Click on the field, a dialog opens, give your TCODE in capitals.
=> Check if you have mapped all the fields that you want to upload using LSMW. You could have missed mapping few target fields with their source fields.
=> Remove any unnecessary structure relations in step 4 - 'Maintain Structure Relations'.

LSMW Routing Standard Batch Input Create Batch Input Session

Hello All,
I am using LSMW for routing upload, using standard batch input method. Program RCPTRA01.
I am facing this quite peculiar problem.
I have tried first with separate text file for every source structure. Everything works fine till convert data step.
But when I go for 'Create Batch Input Session' it creates session for tables MAPL, PLKO, PLPO, PLMZ, PLMK. Other tables remain balnk (EAPL, PLFL, PLAB, PLFH, PLPH, PLFT, PLFV, PLWP). Because of this while running the session only the header and material assignment to task list get uploaded. Rest data, operation, MIC, component allocation do not get uploaded.
I have also tried for one text file for multiple structure. In that I face porblem for BDC creation. While debugging I faced th same thing in this also.
Could anyone please explain me the soution for this? Do I need to amend any progrm fior this?
Expecting lightning fast replies from Gurus....
Mimiri

Hello All,
I am awaiting your reply on this.......
Mimiri

PIR - LSWM Error in create batch input session

Hi
i made a conversion program Purchasing info record through Standard object / Direct Input in that Step 13 : Create Batch input session when i execute the Batch Input session i am getting the following error message
Transaction 00000001 : no transaction code transfered.
Please help me to solve this issue
Thanks & Regards,
mani.

Hi
Everything is working perfectly till STEP 10 : " Display Read Data"
once if i convert it it was not populating the correct one. i cant find the T.Code ,Material Number & Indictor for Purchasing Info record.
Please help me to solve thi s issue
Thanks & Regards,
Mani.

LSMW - Error in Inventory - Create batch input session

Hello good day.
I'm trying to create a batch input session for inventory upload (Standard Batch Input program - RM07MMBL) and when I select the Name of logical file = "MM_INVENTORY_MANAGEMENT_GOODS_MOVEMENT" and press F8, the following error occurs:
Sequential file mmgoods cannot be opened
Message no. M7 850
Now as the legend says.... I've contacted my system administrator and he keeps telling me everything is ok, but the error keeps appearing, where can I see if I have authorization for this "file" ???
Where is it created ??
I need more info on this.
Your help is very much appreciated.
Thank you.
Juan

go to file transaction n check for the logical file path and logical file weather it is defined correctly r not?
if it is correctly defined check for the file, weather the flat file is defined at the correct location which is defined in the logical file path
u can refer the below link also
Re: Logical file
Regards,
Naveen

Create batch input, does not include all records

Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.

I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs.

Batch input session for Recurring Entry

Hello All,
i have created Batch input session for Posting document's for recurring entries creted and job executed in background through SM35 and done successfully, but i am unable to find the Batch input session in SM35 which i have created to run the job.
i want to see the log file for this Batch Input session.
Please help me how to get the batch Input Session.
Thanks
Shankar

Hi Murali...
Thank you a lot for your answer, i have created the Batch input session without selecting the "HOLD Session" Check box..
Issue Resolved
Thanks Again
Shankar

Batch Input Session empty while posting Manual Bank Statement T.Code FF67

Hi Experts,
I am trying to do the Bank Reconciliation by T.Code FF67.
The statement is getting saved but I could not see the Batch Insput Session (T.Code SM35) to post the entries.
Please help me in this issue.
Thanks in advance
Priya

Hi,
Saving Bank Statement Data and Posting Statement are two different transactions.
Once both amounts (in FF67, Amounts Entered, Statement Amount at the bottom) are matched then if you save, it will save the data in FF67 format. In that screen only if you save again then it will post statement and create batch input session. Similarly you also processed or differently?
Check again in FF67 statement screen & revert back.
Sarma BH

Table control lines cannot be controlled in Batch Input session ?

I am using a program which creates Batch Input sessions for the transaction FCHR (Online cashed checks) . The second screen is that of a table control where the check number is entered.
I observed that while doing SHDB, if we tick the default size then changing the desktop resolution has no effect on the number of lines in table control - we see 14 lines in both cases.However, when the batch input session is processed, the number of table control lines varies according to the resoution(9 lines for 800600 and approx 15 for 1024768). Selecting the 'Dynpro standard size' option while processing the session has no effect.
I know call transaction with 'default' parameter in optparam will take care of this problem. But I want to know whether Batch Input Session is known to have a problem with different resolutions.

HI..
i had the same problem once.... i dealt in the following way
while entering values in table control
1) enter value in the first line
2) look for button on application toolbar using which you can increment line
3) you will not find difference for first line but you will find it when you insert second line and go for next line.
4) now for every increment you will get table conrol as (02) if you are going for recording.
this will surely solve all issue related to table control as it solved for me
regards
Edited by: Mohit Kumar on Feb 19, 2009 12:04 PM

Problem while executing Batch Input session

HI All,
I am creating batch input session for transaction FB01.After creating the sesson when I am trying to execute it, its giving me the pop up "Session XYZ is being processed by user" and doesnt allow to excute it.
Pease suggest me the solution on this.
I have tried using "COMMIT WORK" , " COMMIT WORK AND WAIT", but it is not working.
Regards
Saurabh

HI Saurabh
I guess you are trying to process a session which already being processed. You can check the session that are currently in processing state via tab "In Processing". We an process the sessions that are in "New" or "Incorrect" State.
Kind Regards
Eswar

LSMW- Batch Input session getting error

Hi All,
I created LSMW object for Tcode KO01 and its creating the Internal order as expceted.But even after creating the document the Batch Input session status is showing incorrect.No messages are also displayed in the log.
Please let me know why this is happening.
Thanks in Advance,
Savitha

Hi,
Detail Error Message is as follows:
No batch input data for screen SAPLIMR0 1110
Message no. 00344
Diagnosis
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
Possible reasons:
1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.
System Response
None.
Procedure
For 1: Either re-create the session or process it in expert mode. Correct the batch input program.
For 2. It is very difficult to analyze this problem, particularly in the case that the screen sequence or the display-only options of fields differ according to whether the transaction is being processed in the background or as an online dialog. It could also be that this kind of transaction cannot run with batch input.
For 3: Have the creator of the session process it. If no error occurs now, then this is a program with user-specific Customizing.
Regards,
ababfk

How do I create a data set ready for a batch input session

Hi:
I don't know how to create a data set ready for an BATCH-INPUT SESSION.I know that with the function BDC_INSERT make de input online, but my requirement is that generate the data set and left to the user get in de SM35 transaccion and decide to him if it's execute or not. I have all the information in a BDCDATA table.
Any clue would be great!!

You just have to do:
BDC_OPEN_GROUP (Open new batch)
BUILD BDC DATA (Your own code)
BDC_INSERT (Insert BDC data you have built in step 2)
BDC_CLOSE_GROUP (Close batch)
This will just create a new batch and it can be processed in SM35.
To build BDC data:
LOOP AT your_input_table.
<<here you have to use the code generated from recording in trasaction SHDB>> (i.e. bdc_dynpro and bdc_field performs)
ENDLOOP.

LSMW Issue at step -Run Batch Input Session

Dear gurus,
While uploading service master through lSMW while processing the system prompts a message specifying "Buffertable not upto date" at Run Batch Input Session step .So please investigate what is missing/wrong.
Wirth regards,
Raj

I dont think that this has directly something to do with LSMW.
It is more related to the transaction your try to post in the batch input.
Search OSS with the error message number. I had seen some notes for number SE001, but your message is actually twice in the message table, and you did not tell the message number.
If it is message SE001, then you may find programm corrections in OSS.
Otherwise just log out and in again and try, or open a message at OSS yourself if the problem still persists

Batch Input Session not getting created at FF67 level

Hi,
I have posted two transactions at FF67 level - One check deposit ( + Rs. 40000/-) and One Check Issue (- Rs. 30000/-). After saving twice, message is shown statement listed and posted. When I go to overview, It says manual posting incomplete. When I try to look for batch input session, it has not been created. Can anybody in the forum guide me in this regard?
Regards,
V RAjeshwari

Hi
To resolve this problem, again go to the same T.code FF67, and in the overview, select the statement and press transfer.
After coming back to the main window, go to Settings - Specifications and ensure that you have selected processing type as '2'. Then try to post the statement.
If this does not work, please check whether any batch job scheduled/pending in SM37.
Regards

Batch input session is not created

hello iam migrating inventory balance using standard batch input method .when iam running batch input session it is not created so nothing getting transfered.
and also when i uploaded the flat file and execute step read data it is showing 10 items but when execute next step show read data is showing only 1 item record.
can any one help with this thanks in advance.
Regards
priya

i got the answer i dint execute process overview after creating seesion

LSMW Create Batch Input Session

Similar Messages

Maybe you are looking for