LSMW PO/SO Text
Hello,
I need help with a code for loading Sales Order / Purchase Order Text from a file with multiple lines.
In LSMW I'm using object 0020 (Material Master). The object itself is working correctly however, the file that was provided to me by the businees has multiple lines for one material.
Example:
MATNR......TDSPRAS......TDLINE
ABA320.......EN.......AAAAAAAAAAA
ABA320.......EN.......BBBBBBBBBBB
ABA320.......EN.......CCCCCCCCCCC
With using direct mapping in the LSMW, only the last line gets uploaded.
I would need your help in writing a code to be able to load all of the lines.
Thanks a lot for your help in advance.
Regards,
Eugene
Hi,
Try this way,
In the Field Mapping part.
1)Declare the following <b>global variables</b>.
* __GLOBAL_DATA__
DATA : indx TYPE sy-tabix,
tdline TYPE tdline.
2)In the source and target field mapping for <b>tdline</b>
Put this code considering it_mara is your source structure.
<b>CLEAR tdline.</b>
READ TABLE it_mara WITH KEY matnr = <matnr value>
tdspras = 'EN'.
IF sy-subrc EQ 0.
CONCATENATE it_mara-tdline tdline INTO tdline SEPARATED BY space.
indx = sy-tabix.
ELSE.
EXIT.
ENDIF.
DO .
indx = indx + sy-index.
READ TABLE it_mara index indx <b>COMPARING matnr</b>.
IF sy-subrc EQ 0.
CONCATENATE tdline it_mara-tdline INTO tdline SEPARATED BY space.
endif.
ENDDO.
clear indx.
Regards,
AS
Message was edited by: Arun Sambargi
Similar Messages
-
LSMW - Purchase Order Text in Material Master
All MM Experts,
I tired to create simple Batch Input Recording but the screen does not get recorded for Purchase Order text maintenance in mass for article master data. we are maintaining Purchase Order Text in article master data in basic data screen on additional data button under purchase order text tab.
Any suggestion on creating LSMW for purchase order text.LSMW has a standard direct input for long texts, hence it is not necessary to do a recording.
help.sap.com gives real good help for loading loading long texts with LSMW, further has this been discussed many many times here in MM and in the data migration forum.
try to search a bit, you dont really need more than the words you already have used on the subject to get a good variety of answers -
LSMW Customer Master text load- screen to small
Hello!
I am loading customer texts via LSMW.
Some of the texts are very long (up to 29 paragraphs/lines), though during LSMW batch run, the screen shows only 20 paragraphs/lines, so 21 onwards are not loaded...
How to expand the quantity of lines so it is eg 30 on the screen?
Thanks!
Cheers
BeaHi,
You can try to increase the resolution of your screen and make the screen to look smaller.
Or you can try to use FM 'SPLIT_TEXTLINE' to split those text which cant upload to your master data.
Thanks. -
LSMW loading Sales Text to Material Master
My BI recording is not showing the Long Text for Sales Text at all. Can anybody help?
MM02 Change Material &
SAPLMGMM 0060
BDC_CURSOR RMMG1-MATNR
BDC_OKCODE =ENTR
RMMG1-MATNR 17783622846 MATNR Material Number
SAPLMGMM 0070
BDC_CURSOR MSICHTAUSW-DYTXT(08)
BDC_OKCODE =ENTR
MSICHTAUSW-KZSEL(08) X KZSEL_08 Checkbox
SAPLMGMM 0080
BDC_CURSOR RMMG1-VTWEG
BDC_OKCODE =ENTR
RMMG1-VKORG jp01 VKORG Sales Organization
RMMG1-VTWEG 01 VTWEG Distribution Channel
SAPLMGMM 4040
BDC_OKCODE =TEAN
BDC_SUBSCR SAPLMGMM
BDC_SUBSCR SAPLMGD1
MAKT-MAKTX POLYSILAZANE NP110-0 MAKTX Material Description (Short Text)
BDC_SUBSCR SAPLMGD1
SAPLMG19 1000
BDC_CURSOR DESC_LANGU_NEW
BDC_OKCODE =ENTR
DESC_LANGU_NEW ;
SAPLMGMM 4040
BDC_OKCODE =BU
BDC_SUBSCR SAPLMGMM
BDC_SUBSCR SAPLMGD1
MAKT-MAKTX POLYSILAZANE NP110-0 MAKTX Material Description (Short Text)
BDC_SUBSCR SAPLMGD1
BDC_CURSOR LANG_TC_TAB_TC-SPTXT(
SAPLSEUO 0300
BDC_CURSOR G_LINE_1
BDC_OKCODE =YESInstead of BDC Recording, why don't you use Standard Batch/Direct Input Object 0001 (Long Texts), Method : 0000 ?
-
Maintain Text in Infotype 0041 via LSMW
Hi,
Has anyone had success loading text into Infotype 0041 via lsmw?
I am trying to create an lsmw to maintain text in infotpye 0041. I follow the route PA30, then when in IT0041 I go to edit and maintain text.
The problem is that I get a syntax error because the field I am trying to update is RSTXP-TDLINE which is a length 0 and format type string. LSMW won't accept string fields so in the generated program for the lsmw the line reads: "tdline_01(000000) type c,". This obviously doesn't pass the syntax check.
Any help greatly appreciated.
Regards,
Warren.Hi
I just tried to create a LSMW in my DEV environment. I didnt get any error when recording. I entered the text in IT41 without any issue. What I am getting in the source code is:
RSTXP-TDLINE(01) Abcde TDLINE_01 ABAP Source Line
Am I missing what you are seeing?
Cheers
Pramod -
Upload sales text for material master using LSMW direct input method
Hello Experts,
I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR LONGTEXT LINE
MATERIAL1 LONGTEXT FOR MATERIAL MATERIAL1 1
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file
Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTH .
/SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
Rule : Constant
Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME Name
Source: ZLONG_TEXT-MATNR (MATNR)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID Text ID
Rule : Constant
Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS Language Key
Rule : Constant
Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
Rule : Constant
Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE Text Line
Source: ZLONG_TEXT-LTEXT (LTEXT)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file
Legacy Data On the PC (Frontend)
Data D:\Sales_Longtext.txt
Step7 -> Assign File
ZLONG_TEXT Source structure for long text
Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure Read Written Not Written
ZLONG_TEXT 1 1 0
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 1
Step 8 -> Display read data
Field Name Field Text Field Value
MATNR MATNR MATERIA1
LTEXT LTEXT SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
Step 10 -> Display converted data
1 /SAPDMC/LTXTH 1MVKE MATERIAL1 0001E
2 /SAPDMC/LTXTL 2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench
Project: ZNRD_PRJ1 ORH
Subproject: ZNRD_SUBPRJ2 Upload long text
Object: ZNRD_LTEXT Long text tru direct input
File : ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0
Now when i check the material master sales view -> sales text it is empty.
Please help me with the same.
Regards,
Ranjith NHello Experts, I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR LONGTEXT LINE
MATERIAL1 LONGTEXT FOR MATERIAL MATERIAL1 1 *************************************************************************************************************
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure
/SAPDMC/LTXTH . /SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
Rule : Constant
Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME Name
Source: ZLONG_TEXT-MATNR (MATNR)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID Text ID
Rule : Constant
Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS Language Key
Rule : Constant
Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
Rule : Constant
Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE Text Line
Source: ZLONG_TEXT-LTEXT (LTEXT)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file Legacy
Data On the PC (Frontend)
Data D:\Sales_Longtext.txt
Step7 -> Assign File ZLONG_TEXT
Source structure for long text
Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure Read Written Not Written
ZLONG_TEXT 1 1 0
Transactions Read 1
Records Read: 1
Transactions Written: 1
Records Written: 1
Step 8 -> Display read data
Field Name Field Text Field Value
MATNR MATNR MATERIA1
LTEXT LTEXT SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
tep 10 -> Display converted data
1 /SAPDMC/LTXTH 1 MVKE MATERIAL1 0001 E
2 /SAPDMC/LTXTL 2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench Project:
ZNRD_PRJ1 ORH
Subproject: ZNRD_SUBPRJ2 Upload long text
Object: ZNRD_LTEXT Long text tru direct input
File : ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0
Now when i check the material master sales view -> sales text it is empty. Please help me with the same.
Regards,
Ranjith N -
Basic Data Upload to MATERIAL Using LSMW is not working
HI All,
we are using LSMW /SAPDMC/SAP_LSMW_IMPORT_TEXTS program to upload the basic text of the material, all steps are executed correctly and shows records are transfered correctly , but the in MM03 the text is not uploading..
EPROC_PILOT - MASTER - TEXT_UPLOAD Basic long text 1line
Field Mapping and Rule
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
Rule : Constant
Code: /SAPDMC/LTXTH-OBJECT = 'MATERIAL'.
NAME Name
Source: LONGTEXT-NAME (Name)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-NAME = LONGTEXT-NAME.
ID Text ID
Source: LONGTEXT-ID (Text ID)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-ID = LONGTEXT-ID.
SPRAS Language Key
Source: LONGTEXT-SPRAS (Language Key)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTH-SPRAS = LONGTEXT-SPRAS.
* Caution: Source field is longer than target field
/SAPDMC/LTXTL Long Texts: Row
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
Rule : Constant
Code: /SAPDMC/LTXTL-TEXTFORMAT = 'L'.
TEXTLINE Text Line
Source: LONGTEXT-TEXTLINE (Text Line)
Rule : Transfer (MOVE)
Code: /SAPDMC/LTXTL-TEXTLINE = LONGTEXT-TEXTLINE.
and at last it displaying as follws
LSM Workbench: Convert Data For EPROC_PILOT, MASTER, TEXT_UPLOAD
2010/02/01 - 10:14:25
File Read: EPROC_PILOT_MASTER_TEXT_UPLOAD.lsmw.read
File Written: EPROC_PILOT_MASTER_TEXT_UPLOAD.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
can any one tell us what could be problem
Regards
Channappa SajjanarHi , thanks for your reply,
i run the all the steps .
when i run the program it gives message as follows
Legacy System Migration Workbench
Project: EPROC_PILOT eProcurement Pilot
Subproject: MASTER Master data Upload / Change
Object: TEXT_UPLOAD Basic long text 1line
File : EPROC_PILOT_MASTER_TEXT_UPLOAD.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0 -
Hi,
I am using RFBIBL00 in LSMW to upload AP/AR open items. When I run the job in the foreground, I am getting an error as the second line item is not filled (empty). I think that the structure of my upload file is not correct. Do you have sample upload file?
The settings are:
- Object: 0100
- Method: 0000
- Program name: RFBIBL00
- Program Type: D
The upload file (XLS) has two rows. The following columns are filled.
<b>Row 1:</b>
Document type: KR
Posting key: 31
Account: 125263
Company: code 8000
Reference: lsmw1
Currency key: EUR
Amount: 100
Document date: 19102007
Posting date: 19102007
Header text: test lsmw
Profitcenter:
Item text: test lsmw
<b>Row 2:</b>
Posting key: 40
Account: 41003000
Company code: 8000
Amount: 100
Header text: test lsmw
Cost center: 310032
Profit center: Dummy
Item text: test lsmw
Kind regards,
KenanHi guys,
I solved my problem
The solution is:
1) Create two structures for open item; STRUCT_HEADER and STRUCT_ITEM (lower level).
2) Define the source fields. Create a dummy source key field with the same name (e.g. ITEM_NO) in both structures for linking header and items.
3) Maintain structure relations. Link BGR00 and BBKPF to STRUCT_HEADER and link BBSEG to STRUCT_ITEM.
4) Maintain field mapping for all source fields except for key field (e.g. ITEM_NO)
5) Specify two (table, separator tabular) source files. One for header and one for items.
6) Prepare the source files. Define the key field (e.g. ITEM_NO) in both files. Use same key value (e.g. ITEM_NO = 001) in the "header.txt" for the related items in the source file "items.txt". So, you can have an open item with 1 header and 100 line items.
Good luck!
Kenan -
Long text in PURCHASE order text view in program RMDATIND
hi all,
ive to upload data for material master iam doing this using lsmw & standard object 0020 program RMDATIND.purchase order text.In this iam unable to upload purchase order text in Purchase order text view can anyone plz tell me how to do tht??? its a bit urgent
points will be awarded!
rgds
Message was edited by:
abbaper
Message was edited by:
abbaperHi
In LSMW
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Regards
Anji -
How to save long text for IA01 Transaction using BDC
Hi All,
In my requirement I have to create a Task List Equipment and Task List Functional Location using BDC.Here I need to upload the long text for both IA01 and IA11 transactions.I am using SAVE_TEXT function module to save the text and COMMIT_TEXT also after save text.But I am not able to see the text in IA12 and IA02 transactions.But using READ_TEXT I am able to get the text what updated using SAVE_TEXT.
Please answer for this if any one worked on this requirement <Priority normalized by moderator>
Thanks,
Satya.
Edited by: Vinod Kumar on Jan 2, 2012 9:02 PMHi Satya,
There is a simple way to update the long text. There is direct input object in the LSMW for long text.
Object : 0001
Method : 0001
Program type : D
SImply go and create the LSMW with first option and follow the steps. No need to call the function modules separately. This standard program will take care of every thing.
If you have multiple lines to populate in the equipment master at the header level then you need two set of files. Then key will be equipment number with leading zeros if it will not be alpha numeric.
1) First file with field EQUNR.
2) Second file will be
EQUNR C(018) Technical identification number
TXPARGRAPH C(002) Tag column
TXLINE C(072) Text editor text line
TEXT_MARK C(001) Description Indicator for RIIBIP00 (IBIP) Processing
Please let me know if you need more in detail.
Thanks,
Satheesh -
Extract the Long Text in txt file
Hi
I want a generic program which can extact the long text for any of the object(Material, Customer, Vendor..) and for n number of records in the upload file format taken by the LSMW for long text.
Regards,using FM create_text you can upload multiple lines of text.., there is no separate LSMW program for this.....
-
LSMW for Customer master text upload
Hi
I would want to upload the customer master text using LSMW. I see a message type /DSD/HH_CUSTMASTEXT (Customer master additions) being available.
has anybody used this for text upload??
I am not sure how it works, i dont see the provision to enter the text unlike the "SAVE_TEXT function module.
If any one of you have used it, kindly let me know.
Thanks
ManjuHi Srinivas,
yes we could do the text upload using direct input method. I need to invoke it from web methods, it would be difficult with direct input method and hence i was looking for using IDOC's.
Regards
Manju -
Upload purchase order text through LSMW
Please tell me procedure for uploading sales order & purchase order text in material master through lsmw
Hi
Long Texts are stored in STXH table with 4 parameters TEXTNAME,OBJECT,ID and LANGUAGE
You can't find the complete text in any table
You will find these 4 parameters in the table STXH.
Texts are created using the fun module CREATE_TEXT and SAVE_TEXT and these texts are fetched using READ_TEXT fun module
For uploading these long texts using LSMW see
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
<b>Reward points for useful Answers</b>
Regards
Anji -
Problem for uplaoding sales text using LSMW
Hi,
I have use LSMW for uplaoding material masters sales and purchase order text , first I have done for purchase order text with object : MATERIAL and ID : BEST it works fine for this after that when I am trying same for uploading sales text OBJECT : MVKE and ID : 0001 it is picking file proerly and till final BDC step it is not giving any error but in material master sales text is not getting updated for that material.
what canb be the problemm
also for pO text for matnr i have given only material code 18 Chr.
and for sales text i hva egiven MATNR + SALES ORG. + DISTRIBUTION CHANNEL as it required for sales text.
regards,
zafarDear Zafar,
I found a similar problem while uploading Porduction order long text. May be this information is useful for you.
The common task of changing the long text of a production orderu2019s operation can bring some surprises.
The first problem that is usually encountered is that after updating the long text with the function SAVE_TEXT, the new text is not visible in standard SAP transactions like CO03. The new text can be read with the function READ_TEXT though. The trick is that SAP uses the u201Clong text existsu201D indicator, the field TXTSP in the table AFVC. To make the text u201Cvisibleu201D to standard transactions, we have to set the TXTSP value to the current language (or the textu2019s language). Unfortunately, this has to be done with the direct UPDATE on the AFVC u2013 there are no known workarounds.
Another problem can be seen when the same order is processed by users that use different languages. While SAP allows to store the long text for the same operation in several languages, actually, only one text object will be active at the same time in regard to standard transactions u2013 the object in the last saved language. That means, when SAP writes the text back, the TXTSP will be overwritten with the current language (say, language A). If the next user is working in another language (language B), SAP will present the text in the u201Cfirstu201D language (A) in the CO03 (even if the text in language B exists!). But after saving, the text will be written in the new language and TXTSP will be set accordingly.
So, when working with long texts directly, you have to read with READ_TEXT using the language stored in TXTSP, NOT with the current language. When saving, you save in the current language and set the TXTSP to the current language. This way you are consistent with what SAP does and this will prevent you from surprises in a multilingual environment.
Regards,
Kamal -
Upload Material master with long text using LSMW
Hello,
i want ot upload material master data via MM01 using LSMW in following views: basic data 1 ,2, purchasing, purchase order text, plant data 1,2.
i have to upload long text in purchase order text with length more then 132 char. (approx 700 char long text). and i have text file in which long text is maintained in a single row. then how can i do it without formating text file or anyother possible solution.
please help.ca u clarify how can i do it.
suppos i have longtext "Air cooled type air-conditioning unit complete with following components & distance between indoor & outdoor unit is 10 RMT. A).Indoor evaporating unit comprising of cooling coils,insulated drain tray,20 micron HDPE washable filters,blower,motor,electical junction box etc. B).Outdoor condensing unit comprising of hermatic/semiharmetic compressor's.condenser coils,propeller/axial fans,motors,pressure switches/cutout etc.C).Charging of refrigerant gas & oil.D).Inter connecting refrigerating piping of copper duly insulated with EXPANDED POLYETHYLENE tubing.E).Complete electical power wiring of AL.&Control wirng of copper required from indoor & outdoor units.Earthing of the complete system with 8 G G.I.wire. F).Electrical panel will be completed with necessary starter,fuses,switches,timers,over-load relays,contactors,push button and indicating lamps,single phasing preventer etc..and also with remote control with cording. G).The panel should have 1 no.potential free contactor to connect with central fire detection system.The panel should have voltage scanner to ensure stabilized power input to the machine.H).Outdoor unit shall be mounted on MS angle base frame structure duly black painted with synthetic epoxy paint.I).The frame structure shall be mounted on MS plate & serrated rubber pads."
then what i have to do changes in lsmw.?
Maybe you are looking for
-
Not able to use remote desktop externally on a WRV200
Hello all, Untill 5 minutes ago I wasn't able to get remote desktop to work from an extern computer to my computer which is wireless connected in our network. It worked from a network computer from the beginning. I have port 3389 correctly forwarded
-
How can I have the pricing conditions at the item and header level of the d
How can I have the pricing conditions at the item and header level of the delivery? There exist "condition" tabs both the header and the item level of the delivery but the contents of the tabs are empty. I'll be happy if you can help me. Thanks in ad
-
Lenovo G50-30, Windows 8.1, Boot Probleme, ACPI
Hallo zusammen, habe mein G50-30 mit Windows 8.1 Pro, 64bit laufen. Leider ist es der Fall, dass es beim starten teilweise, nicht reproduzierbar zu Verzögerungen kommt. Teilweise muss ich das Gerät durch 3-4 Sekunden druck der Power-Taste abschalten
-
I cant even uninstalle ED 2014 CC with AdobeCreativeCloudCleanerTool. When...is...this...software...going...to...be...fixed? When?
-
J2EE Tutorial: SunSpecific Settings dialog box Frozen
I was trying to package the OrderApp example in the tutorial (Chap 27) and after defining the relationships between the different entity beans in DataRegistryJAR, I tried to set the JDNI Name in Sun Specific Settings dialog box. After that the dialog