LStudio 9-New User-Basic questionsPls help!

Just learning to use Logic Studio (LS) after working on Nuendo/Cubase.I have some basic questions & would have more as I Keep exploring & would appreciate your help & patience in answering these questions.
To start with I would like to know how to raise the volume level of the wave form of a track.I just imported a few wave files into a new project but the visible wave levels on some tracks are very small.In Nuendo there used to be a 'handle' & we click on the track & just raise the level by moving the mouse upward.Is this possible in LS or is there any other way to raise the wave level on the track apart from raising the track volume through the mixer?
Thanks in advance for your reply.

I'm going to be keeping this thread open for those who are patient enough to answer my basic questions as I explore Logic Studio!As I read the manual your valuable input would be of much help.My knowledge of working in Nuendo seems to make things a lot more complex while working on Logic Studio.
In Nuendo/Cubase I only knew non-destructable editing.I would like to know if there is such an undo function in Logic Studio.I think I came across an Undo function that could be done only 4 times! Not sure about that!
Also while editing on a track is there any other way to edit directly other than going into the sample editor?
Can I normalize a track directly without going into the sample editor?

Similar Messages

  • MF Crashes on startup, but works in safe-mode and for a few minutes after making a new user, can anyone help?

    After troubleshooting for a few hours, I still cannot find a proper solution. Effectively, I learned that if I create a new profile user, with this command in windows Run: "C:\Program Files\Mozilla Firefox\firefox.exe" -p , I can open the user profile menu manually, and create/delete a new/not-new user, and upon creating and using a new one, it works fine. For a couple of times opening the browser, anyway, in which it results in the same problem as before. I took a list and compared the old files to a brand new users files, and did find some differences. Take these into effect,
    The compatability and extensions .ini files were differed by 3 kb , with a new user being 1, and the old user being 4.
    The Local Store .rdf file differed from 2 for a new user, to 4 for an old user.
    The Mime Types .rdf file differed from 3 for a new user to 4 for an old user.
    Plugin Reg(istry?) .dat differed from 17 new to 20 old.
    Search.json differed from 13 new to 16 old.
    Search Metadata.json differed from 1 new to 4 old.
    URL Classifier Key 3.txt differed from 1 new to 4 old.
    Web App Store.sqlite differed from 96 new to 128 old.
    (All units are KB)
    Seeing as a few articles relating to the problem are "no longer maintained" and the solutions work only temporarily, I came here hoping to fix this little issue. Thank you, and good luck in advance.
    -Av
    Note; the first crash ID is for the new user that crashed, the last is for an old user.

    I see.. I have heard rumors of this, but it did not occur to me that this would literally crash upon startup. Thank you for the help, Edmeister. Will check as "solved it" if it works. Thanks again!

  • New user who needs help quickly!

    Hello!
    I am a new user upgrading from using Premiere 6.5.  I have had much success but there is one part that I can't figure out.  I know on the 6.5 verison I would be able to right click my video, click on "Video" and then click on "motion" to adjust the size of the video as if I wanted to scroll text next to the video.  I can't seem to figure that out in this new version.  Help!
    Thanks,
    Vince

    Left-click to Select the Clip. Look in the Effects Control Panel and you will see all of the Fixed Effects (Motion, Opacity, etc.) and any Effects that you have added. Their control (plus Keyframing) will be found there. By default, it is in the Pane with the Audio Mixer and the Source Monitor.
    Good luck,
    Hunt

  • I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

  • New user need some help.

    I am a brand new user, have a video by someone else, how do open the file to edit?  I would like to explode the video to make additions and deletions?

    Hello, Russell70. You made a wrong turn somewhere, I'm afraid. This is the forum for requesting enhancements in future versions of Photoshop Elements, Adobe's still photo editing program. I think you want the Premiere Elements forum, which is here:
    http://forums.adobe.com/community/premiere/premiere_elements

  • I had lost my icloud account password.i want to reset my password but i dont remember my security question's answer also.and i even dont know my email id in which password reset linc cuold be send..i am new user..please help me out:(

    is there any rule that an app downloded from my old apple id cannto be updated by my new apple id?

    Since you say you are a "new user", please explain how and why you have an iCloud password, security questions, and an email id that you cannot remember.  How could this happen?

  • A very new user needs some help and advice....

    Hi,
    I have just taken the bold leap into Indesign and this is the first day of my 30 day trial.
    I need help and advice from you good poeple...please.
    I have been successfully creating A5 booklets (folded A4) using MS Word and printing to a desktop printer. MS Word sorted out my page order for me at printing time so the correct pages were put together.
    I have been reading as much information as I could find but I am still unable to do the same in Indesign.
    I'm looking forward to using the advanced layout features and having control over what I do but, I need to work out this basic step before I go any further.
    I hope what I have explained makes sense.
    Regards
    John

    So presumably you create a new document, A5 portrait, facing pages. Make sure your ducument page count is a multiple of 4.
    Create, type, tweak, ponder, edit, smile, save.
    To create you booklet using InDesign, from the file menu select Print Booklet.
    You will probably need to jump back and forth from the Print Settings button adjusting Paper Size, Orientation, Color, and from the Print Booklet tab set for 2-up Saddle Stitch.
    Much has been posted on this topic, these are the basics, Print Booklet is not the best module Adobe ever wrote, IMO

  • New User Exit ABAP help Needed

    Hi ABAPers.
    I need some help please
    PLease give me the coding for the following scenario
    if a user exists in table usgrp_user with user group 'x'
    allow that user to post to GL account HKONT '441100' without a trading partner VBUND
    If not, then issue message
    thanks so much guys
    Brian

    Hello
    Check with ABAPer on the user exit coding. Once done create a substitution rule and assign the user exit there.
    Reg

  • New user, need major help...

    I just got a new Ipod shuffle for Christmas and having a little trouble...I have many mp3's on my winamp, and really wanted to transfer them to the shuffle so i could listen to them while i work out or travel...i right clicked on the song and it transferred, but i can't get them to play on the ipod....basicaly, how do i transfer mp3's that i currently have onto this and have them play?...is the shuffle for itunes only?...thank you for your help, i appreciate it...

    Add the songs to the iTunes library, and then send them to the iPod shuffle from there. The iPod uses a folder structure different from other MP3 players, and requires software specifically designed for that structure for storage of playable music.
    (27678)

  • New user needs workflow help..

    Hi,
    I have been using iMovie for years and love the product. I have done 3 documentary style films (60 - 90 minute range) using it. Call me crazy, but I did everything I needed to do in it quickly and easily.
    Upon seeing the future of imovie with its latest release, I decided that instead of getting the new imovie, which I don't like, I would take the opportunity to upgrade to Final Cut Express instead. So I am transitioning my workflow from imovie to FCE.
    Here's my current question: I have started to shoot footage for my latest film. Previously, in imovie.. I would then take all that footage and just import EVERYTHING into imovie. Since I shoot about 90 minutes of footage each week, I would just create a different imovie file, corresponding to each tape I used in the camera, so I'd have different files: week 1, week 2, etc. This allowed for ALL my footage to be in the computer in a way I could find things easily and not leave anything on the camera. Then I would edit down each week, once it was done I'd export that "sequence" and when all the sequences were done, I'd pull all the pieces into one new imovie file to do the final assembly, sound work, etc.
    So what do you all recommend for switching over to FCE? In looking through the literature, it appears FCE stores all the video elements for all projects together, rather than in my weekly individual files. TO me, that means I have one file reference over 30 hours of raw video footage and that just makes me uneasy. So... do I do what I have always done and just import everything into FCE and then edit afterwards, or do I do a "first round" of editing when I import so that I am only capturing what I think I will use? What will give me the least amount of headaches come mid-October when I start to plow through all this footage and put the film together?

    Steve,
    You can do it just about the same way in FCE, although there are some subtle differences & siginificantly greater editing capabilities in FCE.
    You will have to create an FCE project in order to capture video from your camera. However, once captured, the resulting clips (which are actually QuickTime files on your hard drive) can be used & reused in any FCE project - they are not locked to the FCE project in which you captured them.
    So, for example, you could capture each tape individually same as you always have (giving each tape a unique name - that's important). Each capture in FCE will give you a separate file on your hard drive. Then, instead of having a different iMovie file for each tape, you will have a different file (captured clip, in FCE terminology) on your hard drive for each tape.
    You can then create a new FCE project (if you want to) and import any/all of the captured clips, edit them together as you desire, and export the resulting sequence.
    In an FCE project, however, you have additional capabilities beyond iMovie to organize your clips - because in the FCE Browser you can create Bins & Folders with their own names and then import & organize your clips into them. You also have the capability to create multiple sequences in a single FCE project, so you wouldn't necessarily have to go through the extra steps & aggravation of exporting intermediate sequences only to reimport them for further editing. Nested sequences in FCE are a very powerful way of assembling a finished project from intermediate sequences & clips.
    I do suggest that you get a copy of Tom Wolsky's excellent book, Final Cut Express HD 3.5 Editing Workshop to help you get started with FCE.

  • New User;PDF files;Help

     Hi there!I can see PDF files (as attachments in my e-mail) on my BB curve 8900 but if I wanto to save/download them on my device there is a message saying that "the PDF files cannot be viewed in the device".  Is this correct or there is something wrong with my device? Any suggestions/advice?Thank you very much indeed to all
    Solved!
    Go to Solution.

    Hi there!
    There is nothing wrong with your BB. PDF's are viewable as long as they remain as email attachments. Once they are disconnected from that, they are then a native PDF file on your BB -- for which you need an application on your BB to read them. the DataViz ToGo apps have it in their Premium package. BeamReader is another app. You can search for whatever one you desire.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • New User - Need Music HELP!!!!!

    How do I store the music on my phone if it isn't already?  I don't want to eat up my data each month. I only have 2gs of it and I run, so I play music - a lot!
    I have come to find out that the music is NOT stored on my phone and is therefore using the cloud drive to play music.  So I am now receiving warnings about my data usage.
    How can I download the music to my actual phone?
    HELP!!!!!!!!!!!!!!!!!!!

    This is easy. Connect the LG G2 via usb cable to your laptop/desktop. Next you will note the computer recognizes the device and assigns a drive letter to it in Windows Explorer Could be Drive E, F, G and so on.
    If it is showing open the music folder on your computer, find the music in the itunes music folder and you can either select one file at at time or select all and then click "COPY" do not choose cut!
    Then look for the device drive letter for the phone. Open the folder and you will find the MUSIC folder, double click the music folder to open it ion the phone, then anywhere in the folder right click and select paste. The music wuill now transfer over to your device and keep the original files in your computer.
    You then after all the music is copied over simply unplug the usb cable from your computer.
    It really is easy. once you do it once.
    Good Luck

  • New user and need help!

    I just bought my own iPod this weekend. My 16 year old daughter has had one for a couple of years. The problem is that she has "her" songs downloaded on my computer. I would like to put "some" of her songs on my iPod, but not all of them. How do I only put some of them on mine without downloading ALL of them?? Why can't there be two separate libraries for two separate people?
    Also... my daughter wants to know how to delete songs from her library. Can anyone help?
    Thanks! I may have more questions, so be prepared! :)
    Compaq Presario Windows XP
    Compaq Presario   Windows XP  

    Pete,
    Man I appreciate you sticking with me...but dude..its like being married..I listening but Im just not hearing you..lol
    My fathers music in in the 'My music' folder..Inside that folder I have 3 items..
    1)itunes music library..which has a series of scripts
    2)itunes library..which has a music symbol and the word data behind it.. when trying to access it send me to windows page asking for extension
    3) itunes music which has my fathers music located inside
    with that being said...
    explain to me in simplest form...how you would go in and change login so when I open up itunes itll show a blank libary where I can inport my songs...
    This is what I get for helping the ol' man,,sheesh
    thx again

  • New User Log-In Help

    I just downloaded oracle 10g express and installed it. I selected to run the application after install and its asking me for username and login. How do I get a username and password? I tried the username and password that I created after signing up, but that did not work.

    joracle wrote:
    I just downloaded oracle 10g express and installed it. I selected to run the application after install and its asking me for username and login. How do I get a username and password? Hi!
    During installation of XE you was prompted for password for users SYSTEM and SYS.
    For the first time log in into web interface (APEX) use username SYSTEM and password you typed during install.
    After that you should unlock user HR account to be able to start with building your first APEX demo application.
    Cheers!

  • E17 new user...help.. :)

    First of all I used E17 long ago on Ubuntu, but I wonna try on Arch, so I have some questions:
    1. From where to install E17, from Community repo or from Aur?
    2. How to have some network manager on shelf to manage networks? What to use, wicd? I do not understand very well how to add wicd on shelf etc..
    3. Can I replace default FM on E17?
    Tnanks

    Pyntux wrote:
    First of all I used E17 long ago on Ubuntu, but I wonna try on Arch, so I have some questions:
    1. From where to install E17, from Community repo or from Aur?
    whatever you like. I try to update the community repo 1 or 2 times per month to current svn state. If you don't actively follow development and try to help upstream I suppose that sould be enough. If not, there are various ways to compile yourself.
    Pyntux wrote:
    2. How to have some network manager on shelf to manage networks? What to use, wicd? I do not understand very well how to add wicd on shelf etc..
    3. Can I replace default FM on E17?
    everything in e17 is a module, which you can choose to enable or disable. There is a systray module which you can use for any of your networkmanager/wicd type of thiings. There is also a connman module which you can use with the aur/connman package (connman is for example used in the meego distribution).
    As everything is a module, so is the file manager, so you can disable the default one an use just any you like.

Maybe you are looking for