LTP -SIMULATION REQUIREMENT LIST

Hi
I Have run the LTP for all finished material which are there in plant through MS01
sucussfully run LTP....
now I go to MS05... to see the requirement list..for material wise ..(single material only possible)
if i want see the all dependendent materials with the plant .. how can i get the report..is it possible..
pls..any one can help me in this issue....for this one any t.code is there
regards
sesidhar

Dear Sesidhar,
There's no T code to get the entire list of LTP -SIMULATION REQUIREMENT LIST for a list of materials.
Try to execute MSLD and then downlad the report. It might help you to some extent.
Check & Reply.
Regards
Mangalraj.S

Similar Messages

LTP: how to increase the simulative requirements quantities?

Hello SAP experts,
Is there a way to increase a little bit the simulative requirements quantities, without using the scrap% (which has an impact on the finished material price)?
I have investigated the use of safety stock to increase the components demands, but obviously, in LTP, it is not considered as additional demand... But maybe I missed something...
Please, can you help me on that case?
Thanks in advance.
Regards,
Rudy

Hello Mario, thank you for your reply.
In fact, we have a demand, but the users are always ordering a little bit more that the results given by the LTP.
Now, we would like to have full control and full visibility on it.
So, the first idea was to define a scrap percentage that would increase a little bit the quantities.
But we can't use it, because it has an impact on the costing side for the material price, I think.
So, the second idea was to use the safety stock.
Unfortunately, LTP does not seem to see the safety stock as a demand (like in operative planning), but more as an opening stock...
Then, the 3rd idea was to use the rounding profile to add a percentage on the quantity, but it only applies on purchase orders, and not planned orders... No luck again...
So, none of our 3 ideas can be applied here! And I am searching for another good idea...

I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

Long Term Planning: Simulative Order not covering the Simul.Requirements

Hello everybody,
Maybe someone has an idea what can be the reason of the following problem:
For some raw materials, the total of simulative requirements per day is not equal to the generated simulative order quantity.
For example:
For material RAW, I have:
13/01:
Simulative Planned Order, Qty = 100
Simulative Requirement, Qty = 40
Simulative Requirement, Qty = 40
Simulative Requirement, Qty = 10
Simulative Requirement, Qty = 10
Simulative Requirement, Qty = 10
Simulative Requirement, Qty = 10 ---> Total of Sim.Reqts = 120
I don't understand why the LTP RUN gives me this result...
Does somebody have an idea?
Thanks in advance for your help,
Regards,
Rudy

Thank you, but I finally got it...
The problem was that the MRP type of some raw materials had been changed from X0 to ND.
So we had old simulative planned orders that were not corresponding exactly to the simulative requirements...
Regards,
Rudy

Stock Requirement List - MD04 - adding columns in this list

Dear All,
I am working on the Stock Requirement list ( transactioncode MD04) and the customer wants to add columns with the fields STPO-DATUV ,date of change of a drawing, and the drawing number with revision level STPO-YY_DZEINR.
There is a badi MD_ADD_COL_EZPS which provides in adding columns, but according the structures MDPSX , MDEZX and MDSUX there are no fields in thoser structures, which directly match with the required fields; somebody has a clue to help me out and get it working.
For instance: Vendor- and Customer data can be added by using the pushbuttons and those fields are available from above mentioned structures.
Thanks in advance and kindest regards,
Rene.

Hi Utpal Mishra
You guessed correctly. I missed to inform our Strategy. We are using Strategy group 11 Make-to-stock prod./gross reqmts plnning.
User is not able to do PGI or create delivery. He says I have enough stock in MMBE but why system is not allowing.
Here there are some pending document like -
1. Pending sales order
2. Pending deliveries (picking not done)
2. Delivery created & Picking Done but PGI not done. These things will have a commitment against the stock. But we are interested in getting these document numbers, so that we can take come action against them.
MD04 simply shows the mrp element as order / delivery but the document number is not available. How to find these documents.
Please help. Is there any table or a standard transaction ??
Thanks

Table for Stock Requirement List related information

Dear Sir,
We have make-to-order scenario , on receiving the Order from Customer we first create a Sale-Order for the Ordered Item . Subsequently in MD04 , we find a requirement getting reflected for the Customer Order .
For example say the Sale-Order number is S-101 and the Line Item is 10 for the FERT material say FERT-101 having the Order quantity as 1 number . In MD04 , we find a requirement getting reflected with the following information :
MRP Element --> CustOrd
MRP element data --> S-101 / 00010 / 0001
Recd/Reqd Qty --> 1-
Available Qty --> 1-
We need to write a Z program for getting the list of the requirements against the Customer Order (as shown in MD04) .
Kindly guide us as which Tables we need to refer for getting the above information pl .
We assure to award full points for the suggested solution .
Rgds
B Mittal

Hi,
Pls use below function module, same as you will get Stock Requirement List related information
MD_STOCK_REQUIREMENTS_LIST_API
For test, goto SE37 and test it
Regards,
Sankaran

Stock Requirements List

Friends,
When we are using the t-code MD04 to generate the stock requirements list for a material, it is throwing an error "Please maintain version in table T009". Table T009 is the table for fiscal year variants. There are no versions to be maintained there. Also, the fiscal year variant that is assigned to our company code is maintained there. Further, the stock requirement list is being generated for other materials (even those marked for deletion).
Please advise on how to solve this issue.
Thanks & Regards,
Sameer S. Gupte
Cell: +91 9323274801
Office: +91 66452730

Friends,
The problem was with the material master wherein a different fiscal year variant was maintained in the MRP view (different from the one attached to the company code). Changing the material master has solved this problem.
Thanks & Regards,
Sameer S. Gupte
Cell: +91 9323274801

Stock/requirement list at a particular date

MD04 gives current stock/requirement list and MD05 gives planning result of last MRP run.
Hoe to see stock/requirement of a particular date

Dear Harshad,
As explained there is no standard report to meet this requirement,but stock on a posting date is possible through MB5B.
If my understanding is correct then this stock/requirements list is a dynamic one(even on a particular date) this list gets updated
for each fixed/planned- receipts/issues.So on the same day there may be number of updated list.So there cant be only one
stock/requirements list on a given particular date.
Correct me if I'm wrong.
Regards
Mangalraj.S

Sales Order in the Requirements List

Hello everyone,
I have a problem with the sales orders which do not appear in TX-MD04 (Requirements List) once they have been partially delivered. In other words, the sales order appear in TX-MD04 before posting the goods issue, but it doesn´t even if it is only partially delivered. The outstanding quantity of the order to be delivered should still appear.
I would really appreciate any help relating this issue on how to manage it in the customizing.
Thank you very much to you all in advance.
Víctor

Please check in VOV7 for your item category what is maintained for the field "Completion Rule". It should have been B
thanks
G. Lakshmipathi

"SubReq" is still available in the stock/requirements list.

Hi SAP guru's,
In the subcontracting scenario for our client, the required quantity of child component will be provided to the subcontracting vendor.
For one particular purchase order,
Subcontracting PO for parent material "A" - qty 4284
Child component "B" - qty 24,996 provided to the vendor
"SubReq" is still available in the stock/requirements list of child component referring to the closed purchase order (delivery and invoice posting completed for full quantity, no open item quantity).
What could be the reason for this issue and what is the best solution.
Thanks in advance for your valuable reply.
Reddy.

Hi Csaba,
Thanks for your immediate response to my query.SubReq should not appear in MD04 w/o existing requirement (e.g. PO) as a standard but it is observed for this PO.
The OSS note "115899- Correction report for subcotractor requirements" is not giving the direct solution, but the content in this note may be useful to analyse and resolve the issue which we are trying.
Thanks & Regards,
Reddy GY.

Printing the Collective Stock/Requirements List

Hey All,
I'm trying to print out the collective stock/requirements list via the menu path "System -> List -> Save -> Local File" but it is shaded out and i cannot do this, just like SD variants are needed to be maintained in own data for the report VA05 so that layouts can be saved, do we also need some such varient maintained in own data to access this option ?
Best Regards.

Dear Danish,
After executing the Stock/Requirements List in MD04,in the top menu List -
> variable print --->From
here you can download into a spread sheet or as a local file or as a word processing.
Or else you can print from here.
Now come back with your further queries.
Dear Vivek, MDLD is to print out the MRP list (which is a static one and stock/requirements list is a
dynamic one).
Regards
Mangalraj.S

Different Exception messages in MRP list & Stock Requirement List

Hello Experts,
When I run MRP and then look at the stock Requirement List & MRP list for the same material, I see different exception messages in these list.
I noticed that any of the exception messages in Exception group "7 - Exception during rescheduling" (ie, 10-reschedule in; 15-Reschedule Out; 20-cancel process; 30-plan process according to schedule) is not appearing in the stock requirement list even though they appear in the MRP list.
Does any configuration affect what message group can appear in Stock Requirement List & MRP list?
Please advice.
Regards
Tom

Hi Tom,
For exception message - 62, just do the below checks -
Some of the reasons as to why you may find this exception message is because the backward scheduling can drive the start date in the past so far that:
- there is no valid BOM as of that date
- one or more of the work centers are not valid on that date
- there is no valid factory calendar on that date
Check the scheduling formulas in your work centers that are set up, and/or to specify for the material master a fixed lot or a max lot size so that planned orders result with realistic lot sizes.
Also you can set up MRP to only run on basic dates for your overall run, and to follow up with an MRP run which generates capacity planning only within the planning horizon, such as NETPL. You would need to configure the planning horizon so that it specifies a time frame over which capacity planning is to be done.
Also check the note : 88505 - Planned order upload generates exception message 62
In short, do a thorough check of the parameters maintained to ensure there is no inconsistency in the master data.
Check & revert.
Regards,
Vivek

I am unable to upgrade to Mavericks even though I seem to have all the requirements listed by Apple.

When offered the free upgrade in App Store, I am unable to upgrade to Mavericks even though I seem to have all the requirements listed by Apple.
Model: MacBookPro 2,2, Processor: Intel Core 2 Duo, Speed: 2,33 GHz, Processors: 1, Cores: 2, L2 Cache: 4 MB, Memory: 4GB
Bus Speed: 667MHz, Boot Rom Version: MBP22 00A5.B07, SMC Version: 1.12f5.

10.7.5 is the max for your model. Your mac is one model too old to run anything higher.

Stock requirements list issue

Hi all,
Pl go through the following issue:
There is a material B. It is a component of Material A in BOM. This material A is to be supplied by a vendor by subcontracting.
There is a subcontracting requiment for some 70,000 pieces for this material B for the past one month .But there is no pegged requirement corresponding to this requirement . So , this stray requirement , which is available in stock requirements list of Material B is to be eliminated.
Can you pl suggest some solution?
Those who can give a probable solution shall be awarded points immediately.
Edited by: venkateswara rao on Aug 21, 2008 7:52 AM
Edited by: venkateswara rao on Aug 21, 2008 7:53 AM

I have gone through the OSS notes and understood that it is a programme error . Hence the inconsistency.

Stock requirements list for special stock E

Hello Experts,
Is it possible to view sales order stock along with the sales order and the linked PO in Stock requirements list? If so, would it need configuration changes?
Any input would be rewarded with points.
Thanks,
Raj

Raj,
Of course. That is the standard display in MD04 for Make To Order (special stock E). You can't make it display any other way.
Regards,
DB49

LTP -SIMULATION REQUIREMENT LIST

Similar Messages

Maybe you are looking for