LTV Signature Verification error with VA with id-pkix-ocsp-nocheck

When adobe Reader 11 verify a LTV PDF Signature with OCSPNoCheck VA shows a message that signature is not a LTV

Hi jonagr,
In the Acrobat world (and when I say Acrobat I mean both Acrobat and Reader), LTV only applies to the document signature over the PDF file. Part of that document signature consists of revocation checking and in order for the signature to be LTV compliant all of the revocation collateral must be embedded in the PDF document as part of the signature. The revocation info can consist of either a CRL or an OCSP response. If the cert that signs the OCSP response is a special use designee issued by the certificate authority to sign on its behalf it's that cert that has the OCSP noCheck flag set because there is no sense in doing revocation checking on this special use cert. Otherwise, you end up in a constant loop of validating the validator. 
You shouldn't be using a certificate that is designated to sign OCSP responses (in lieu of the CA signing the response) to sign a PDF file. Starting with version 11.0.9 Acrobat/Reader should prevent you from signing if the Extended Key Usage asserts OCSP Signing.
Steve

Similar Messages

  • Download signature verification error with Itunes 10.5?

    I have been trying to download ITunes 10.5 on to a Dell Windows XP. Download is really slow. I get that. But I get a signature verificayion error when I try download only. I have already deleted the Temp folder. I have not yet uninstall all ITunes and Quicktime. Perhaps I should wait a few days for Apples network to be under less strain?
    Please  advise. Thanks!

    You should probably begin by doing all your windows vista windows updates, those should take care of updating windows installer.
    Once you're updated on windows, you should check to see if you have a 64bit version of windows.
    If you do, you'll want to install the 64bit version of itunes:  http://support.apple.com/kb/DL1427

  • Signature verification error

    I first used adobe signature, and then signed with other PDF reader, is a way to save incremental updates, but when use adobe to verification  the first signature, It said the file has been damaged.
    this test file url is : http://d.pcs.baidu.com/file/246895905e945c8048b2f29e8d3882ee?fid=3878797535-250528-8517461 08&time=1389174592&rt=pr&sign=FDTAER-DCb740ccc5511e5e8fedcff06b081203-vgmkM59aT5I%2FFrO%2B ilUvkqnjKCQ%3D&expires=8h&prisign=RK9dhfZlTqV5TuwkO5ihMQzlM241kT2YfffnCZFTaEMUMBfcIUvWxSGd xC0c48jqMKoU5v/JKZUmpAWJz7OVR968T9IbhxN0HyatJJyE/fx232pW9BdEEXBtrRUCrJk2HOV0gRi4YibEZeu5nB kjeT8NS0o+RrqZhZ3p7aL9Lpw=&r=471201396&cflg=65535%3A1
    Who can tell me the reason for the failure of the first signature verification , thank you.

    I am having the same issue. I turned off my add ons which it did go away but from what I was told it has something to deal with the ask toolbar or any toolbar associated with ask. Which I have no toolbar dealing with ask or even an ask toolbar.
    These are my addons:
    Adblock Plus-Added 2 weeks before issue, never had an issue with it before, use for to block ads that carry viruses, worms and trojans.
    G.a.i.arch toolbar -added recently after this re arose -This one is also a G.a.i.aonline bar-neither have search features so no ask dealing with them.
    Greasemonkey also added recently- blocks crap in signatures and autoplay on profiles on G.a.i.aonline(not the issue either)
    InboxDollars -three days on browser(this is my link to my inbox dollars account, where I can go to read my emails.
    Java Quick Starter - this was already disabled, have issue with the extra Javas.
    Microsoft .NET Framework Assistant- automatically part of the browser like Java Quick Starter
    Password Exporter-added to re add passwords.
    WorldTV Bar Community Toolbar-Added yesterday

  • Adobe Acrobat and Reader digital signature verification error logs

    Can you help me how enable and where Acrobat 9.2 and Reader 9.2.3 error logs to analyse digital signature certificate revacation (CRL, OCSP)?

    Hi Gatis,
    Check out the Security and Digital Signature Admin Guide athttp://learn.adobe.com/wiki/download/attachments/52658564/acrobat_reader_security_9x.pdf?v ersion=1
    http://learn.adobe.com/wiki/download/attachments/52658564/acrobat_reader_security_9x.pdf?v ersion=1
    Once you get the file open look at section 5.3.4.4
    The folder path has to exist, but Acrobat will create the file if it's missing. For example, if you want to save the file to C:\LogFile\digSigLog.txt the folder LogFile would have to exist on the C drive, but the log file itself will get created if it's not there already.
    When you type in the file path and name in the Edit Binary Value dialog in regedit, make sure you null terminate the string by typing a zero at the end of the hex data on the left side of the dialog. It will look like a dot on the right side, but it's not really a dot (a dot is 2E in hex).
    Steve

  • Problems with signature verification in JDK1.5

    Hello to all!
    I have the a problem: I am trying to verify the signature with the following code:
        public static boolean verify(String data, String b64sign)
               boolean verified;
                BASE64Decoder dec = new BASE64Decoder();
                byte[] decoded = dec.decodeBuffer(b64sign);
                CertificateFactory factory = CertificateFactory.getInstance("X.509");
                FileInputStream fis = new FileInputStream("c:/cert/test-server.cert");
                X509Certificate cc = (X509Certificate) factory.generateCertificate(fis);
                System.out.println(cc);
                Signature signature = Signature.getInstance("SHA1withRSA");
                signature.initVerify(cc);
                signature.update(data.getBytes());
                verified = signature.verify(decoded);
                return verified;
        }and under jdk 1.5 the result is always FALSE. I've tried different providers, including "BC version 1.34", "SunJSSE version 1.5", "SunRsaSign version 1.5" but result is still the same.
    Curiously, that under jdk 1.4.2 all works fine, and signature verifies successfully. When running under jdk 1.4.2 provider used is: "SunJSSE version 1.42".
    What am I doing wrong?

    data.getBytes() isn't a reliable way of obtaining bytes from a String. Don't pass the data through a String, preserve it as bytes all the way through. Or use a fixed encoding when you do the translation, i.e. the same one that was used in JDK 1.4.2 whatever that was (by default). The default has changed between JDKs before now.

  • License signature validation error! with NodeManager

    Hi,
    I downloaded the WebLogic Server 6.1 eval from the BEA website and started up a
    NodeManager on the same machine as my
    Administration Console. I am trying to use
    it to start up difference servers on my test machine. For some reason when I try to start up any of my defined server instances I get:
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    WebLogic: license signature validation error!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    If I manually startup the servers using the startManagedWebLogic.sh everything works.
    I'm running on Solaris 8.
    What could I be doing wrong? Does the eval license not cover this scenario?
    Thanks,
    Andrea Rosso

    Hi.
    If you aren't already doing so I suggest downloading and using WLS with service pack 2. If you are then please open a case with support.
    Thanks,
    Michael
    Andrea Rosso wrote:
    Hi,
    I downloaded the WebLogic Server 6.1 eval from the BEA website and started up a
    NodeManager on the same machine as my
    Administration Console. I am trying to use
    it to start up difference servers on my test machine. For some reason when I try to start up any of my defined server instances I get:
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    Unable to start WebLogic Server !!
    WebLogic: license signature validation error!
    $$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
    If I manually startup the servers using the startManagedWebLogic.sh everything works.
    I'm running on Solaris 8.
    What could I be doing wrong? Does the eval license not cover this scenario?
    Thanks,
    Andrea Rosso--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Looking for classfiles with verification errors

    Hi,
    I am writing code for verification of my optimized Java byte code. My only problem is that I wish to have a set of class files with known verification errors so that I use them to throughly test my code. Generating such classfiles myself will waste lots of my times.
    I will be thankful if someone can point me towards right direction. How can I find such class files?
    Looking for your reply

    HowToDoIt wrote:
    There are 100s of things that could go wrong with class files. Each bytecode instruction (there are around 200+ instructions) needs to be tested and so is class file format.
    I can change class files to test few things easily otherwise, I have to spend a great deal of time to create my self of classfiles with errors. Hence it would be great if I could find an already existing class files, made by some community of developers, with known verification errors and I could test my code throughly without any time wasted.I don't say that you won't find it, but you better start creating those classes while you are waiting. It's unlikely that you will find such classes unless Sun has some unit tests available.
    Kaj

  • Digital signature verification failed - Error RTCCTOOL

    Hi guys !!!
    I am running the report from the SDCCNN - RTCCTOOL, but I get the following error message:
    1. Digital signature verification failed
    Description -  The verification of the recommendation content using digital signatures has failed. Therefore recommendations were suppressed.
    Implementation -  Consult SAP note 69455 if there is a known issue with content verification. If you do not find a solution open a customer message on SV-SMG-SDD.
    When I Goto - Digital signatures Activate button digital content verification is disabled.
    Then go to the transaction on the client STRUST 000 and I found the certificate: SSF SAP AGS Online Content View The certificate shows:
    Owner: CN=SID SSF SAP AGS Online Content Verification, OU=I0020596183, OU=SAP Web AS, O=SAP Trust Community, C=DE
    Certificate List: CN=Online Recommendations, CN=OR-C, CN=V01M, OU=AGS, O=SAP AG, C=DE
                CN=Online Recommendations Upd, CN=OR-U, CN=V01M, OU=AGS, O=SAP AG, C=DE
    Both certificates will expire on 01.01.2038.
    According to the help and OSS note 69455 tell me again that I must create this certificate every year, but I see this current certificate, what is the error?
    What is the process because I'm not clear and can not find another OSS note or the SDN forum to tell me what is wrong is happening.
    Thanks guys for the help I can provide.
    Desiré

    Hi all.
    I have the same problem and explore all possible solutions found in this discussion and others without satisfactory result.
    Everything points that may be an inconsistency error external certificate which is in the DB. Anyone know how to fix this.
    Greetings.

  • Cant update CF (Error occurred while installing the update:  Failed Signature verification)

    Hi I'm suffering with this issue Bug#3506758 - MySQL 5.6 Unable to Execute Queries
    and therefore am trying to update cf 10 to version 13 (current version is 8) however I get 'Error occurred while installing the update: Failed Signature verification'
    I'm running Mavericks on Mac.
    Can anyone point me to a step by step way to resovle this please (I'm new to Macs and am a cf coder but alas dont have any experience in server admin).
    Thanks very much indeed.
    Nick

    I was going to suggest that you needed to install the mandatory updater, but the Adobe help page for it says you shouldn't need to if you already have update 8 installed.  Might be worth verifying though.
    -Carl V.

  • SCUP publishing errors (signature verification fails)

    I have been unable to publish updates with full content in SCUP since getting it set up. Here is the environment:
    Config Manager 2012 R2 environment
    Installed SCUP on CAS (running Server 2008 R2)
    Configured SCUP to use proxy
    Here are the steps I followed to get it set up:
    Used IIS Manager to create a certificate request and got certificate from our vendor.
    Imported cert into local computer Personal certificate store.
    Following
    System Center Updates Publisher Signing Certificate Requirements & Step-by-Step Guide, exported .pfx with private keys for SCUP and exported .cer without keys into the Trusted Publishers and Trusted Root Certificate Authorities on the SCUP/CAS server.
    I also configured a GPO to deploy these to clients.
    Set up the Adobe catalogs, then tried to publish a reader update. Metadata updates work OK, but a full content publish generates errors.
    These are the germane errors I am getting (with server name changed to something generic):
    2015-01-07 20:16:04.100 UTC Error
    Scup2011.6 Publisher.PublishPackage
    PublishPackage(): Operation Failed with Error: Verification of file signature failed for file: \\ServerName\UpdateServicesPackages\9b8d0f21-d926-4a76-b64a-592b36247622\df7bfb6e-6c22-4bb7-9f15-b61ee3e09f96_1.cab
    1/1/1601 12:00:00 AM
    1997295659 (0x770C502B)
    PublishItem: InvalidException occurred during publishing: Verification of file signature failed for file: \\ServerName\UpdateServicesPackages\9b8d0f21-d926-4a76-b64a-592b36247622\df7bfb6e-6c22-4bb7-9f15-b61ee3e09f96_1.cab
    Updates Publisher 1/7/2015 3:16:04 PM
    6 (0x0006)
    Publish: A fatal error occurred during publishing :Signature verification exception during publish, verify the WSUS certificates and advanced timestamp setting are properly configured.
    Updates Publisher 1/7/2015 3:16:04 PM
    6 (0x0006)
    I have a followed or looked at a bunch of potential fixes but no dice. Any ideas?

    That might be the vendor of the cert but does not tell anything about the type of cert. It has to be a code signing one - otherwise it won't work.
    Torsten Meringer | http://www.mssccmfaq.de

  • Error during communication with System Landscape Directory: HTTP response c

    Dear all,
    I have redirected a SLD to our Q system. Everything in the Repository is working fine. What did I do:
    - Adjusted settings in SLDAPICUST
    - Adjusted SAPSLDAPI
    - Adjusted LCRSAPRFC
    - Adjusted the following values in the Exchange Profile:
    com.sap.aii.connect.cr.httpport
    com.sap.aii.connect.cr.name
    com.sap.aii.connect.landscape.httpport
    com.sap.aii.connect.landscape.name
    So, SLDCHECK works fine.
    The Repository sees the right SLD.
    However, in the Directory I cannot choose an Adapter Engine (leaves blank) in my comm. channel.
    Then I went to the RWB and got the following message:
    <b>Error during communication with System Landscape Directory: HTTP response code: 403 Forbidden</b>
    Where can I change something to make this work? Is this a user verification problem?
    Thanks in advance for your input.

    go through the notes :-
    #764176 Error in XI due to inconsistent SLD contents
    #720717 Reduce the number of System Landscape Directories
    Regards
       Kenny

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • Load data error: Database selection with invalid cursor (sm21)

    hi experts,
    when I execute processchar, it occur some system error:
    "Database selection with invalid cursor ",
    "Documentation for system log message BY 7 :
    The database interface was called by a cursor (in a FETCH or CLOSE
    cursor operation) that is not flagged as opened. This can occur if a
    COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
    opened cursors), followed by another attempt to access the cursor (for
    example, the next time the loop is executed). "
    the error msg occur when apply bw support package19.
    data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
    Request status always yellow, process is running.
    current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
    thanks for your help.

    I have solved this issue, The Oracle checkpoint not complete.
    thanks,
    xwu.

  • Processchar occur error:  Database selection with invalid cursor (sm21)

    hi,
       when I execute processchar, it occur some system error:
    "Database selection with invalid cursor ",
    "Documentation for system log message BY 7 :
    The database interface was called by a cursor (in a FETCH or CLOSE
    cursor operation) that is not flagged as opened. This can occur if a
    COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
    opened cursors), followed by another attempt to access the cursor (for
    example, the next time the loop is executed). "
    the error msg occur when apply bw support package19.
    data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
    Request status always yellow, process is running.
    current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
    thanks for your help.

    I have solved this issue , The Oracle checkpoint is not complete.
    thanks,
    xwu.

  • When I try to sign in to my account on iTunes, I get the above error message, along with "Please review your account information". When I then click on "Review"

    When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
    When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
    When I click "Agree",  It is disabled.
    Can anyone tell me why this has happened and how to resolve it?
    Please, please, please help.

    Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
    This Apple ID has not yet been used with iTunes.
    I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
    Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
    Either way, count me in on getting annoyed that a week later, this issue has not been fixed.

Maybe you are looking for

  • Error  while import XML file from Production to Dev., But has GREEN status

    Hi, I tried to export/import bex queries through XML transportation. Transportation is being done from Production system to Development. In transport connection I selected required query and then I exported to Development. export of file is done succ

  • Unable to create sales Order/Inquiry object using SAP JCo

    Hi All, Pls can you help me. I am using BAPI_INQUIRY_CREATEFROMDATA2 and BAPI_Trancation_commit to create Inquiry object.From my Client JCo code there is no error.I debugged the BAPI_Trasaction_commit, there is no error,  return code is 0.  But th sy

  • Fixed Assets - Capitalised interest

    Hello Is it possible to post manual Capitalised Interest to a specific Book of an asset. This posting should only post to the non-leading ledger. I see SAP can calculate and post capitalised interest when the depreciation has been posted but want to

  • T-3 to Centro selective data transfer.

    I have been using a Palm PDA since 1997 I have transfered my data from the original PalmIIIx to the IIIc, M505, Tungsten, T2, and  the T3.  I recently bought the Centro and I want to transfer selctive data from the T3. I don't need to access all the

  • 16:9 Aspect Ratio Questions

    I am designing a Keynote presentation for use on a Akai plasma TV with a native resolution of 1024x1024 (16:9 aspect ratio). I set my presentation to 1024x576 in Keynote; I am assuming the TV will display my presentation correctly, and the 576 pixels