Lucreate fails w/msg cannot check device name d41 for device path abbre

I'm using Live Upgrade to install Solaris 10 8/07 on a V490 currently running Solaris 9 4/04. Sol9 is using SVM to mirror two internal drives with file systems for /, /var and swap. I used format and formatted two new slices for / and /var. LU has been removed and the liveupgrade20 script used to install LU from the Solaris 10 CD. I believe the next step is to lucreate the BE, but the lucreate is failing:
root@animal # lucreate -A 'dualboot' -m /:/dev/md/dsk/d40:ufs,mirror -m /:/dev/dsk/c1t0d0s4,d41:attach -m /var:/dev/md/dsk/d50:ufs,mirror -m /var:/dev/dsk/c1t0d0s5,d51:attach -m /var:/dev/dsk/c1t1d0s5,d52:attach -n sol10
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
ERROR: cannot check device name <d41> for device path abbreviation
ERROR: cannot determine if device name <d41> is abbreviated device path
ERROR: cannot create new boot environment using file systems as configured
ERROR: please review all file system configuration options
ERROR: cannot create new boot environment using options providedIt's probably something simple as this is the time I'm doing an upgrade on my own.
Thanks for any ideas,
Glen

I received help elsewhere.
To summarize using the full metadevice names worked:
lucreate -A 'dualboot' -m /:/dev/md/dsk/d40:ufs,mirror -m /:/dev/dsk/c1t0d0s4,/dev/md/dsk/d41:attach -m /:/dev/dsk/c1t1d0s4,/dev/md/dsk/d42:attach -m /var:/dev/md/dsk/d50:ufs,mirror -m /var:/dev/dsk/c1t0d0s5,/dev/md/dsk/d51:attach -m /var:/dev/dsk/c1t1d0s5,/dev/md/dsk/d52:attach -n sol10
(Note: Using the short names (d41, d42 etc) worked with Solaris 10 6/06, but fails with 8/07.)
sysglen

Similar Messages

Device name missing for windows computer

Hi,
I am following the article http://myitforum.com/myitforumwp/2013/11/08/scom-2012-override-free-space-monitoring-for-page-file-drive/ and at the stage of creating dynamic members for a group, in Windows Computer, I do not see a "device name"
field for Windows Computer?
I am on SCOM 2012 R2 UR3. When doing this from the console, it's not the console on the management server (if this matters).
Thans

Hi,
How about doing this from your management server?
Have you import Windows operating system management packs to your management group? If not, please first download the management pack from the below link:
http://www.microsoft.com/en-us/download/details.aspx?id=9296
And import it to your management group.
Regards,
Yan Li
Regards, Yan Li

Cp 8.0.1,What difference between "Publish for Devices" and "Publish for Devices (App) ?

i think "Publish for Devices" and "Publish for Devices (App). it same.
"Publish for Devices (App)" for easy connect phonegap.
"Publish for Devices" for advance user.
not sure you understand but i only share.

Publish for Devices (App) is to publish your captivate project as a native application using PhoneGap API.
Publish for Devices is the normal html publish but for Responsive project. It will publish your project as html content and later you can upload it on some LMS or WebServer to view the content on devices using Browser. It has not nothing to do about advance users.
In both the cases the content will change according to the size of the viewing device.

Setting the "Device Name" when activating device licenses

What determines the “Device Name” in the list of activated devices in the Development Pool on the Adobe license site for device licenses? Specifically for Macs... It doesn't seem to be the "Sharing Preferences" pane...

So, figured it out by myself. It appears that the Adobe serializer uses the local Mac's hostname. You can find that out by going to the terminal and typing 'hostname'. The host name gets set initially by any domain name that is assigned to the IP. If none is, it uses the Sharing Name in the Sharing preferences pane. Regardless, you can override and change the hostname using the terminal (sudo scutil --set HostName mynewhostname.local). Deauthorize the device on the Adobe site and reauthorize and it will appear as desired. This way, you can have the machine listed on the Adobe site however you wish rather than by domain name. This is helpful if you have a long list of machines and wish to set their hostnames to their room number or location, etc.

Cancellation of time slice in EG41 (device info record) for device

Hi,
How to cancel time slice for device in EG41 (deice info record)
Actually we have device which is technically installed. which has 2 time slice say 10.06.2009 to 16.06.2009 & 17.06.2009 to 31.12.9999. both different technical data. I want to cancel second time slice . how to do this???
I have already cancelled all meter reading corresponding in EL37.
Regards,
Chetan

solved by myself

Cannot download device name license for mac version

I'm having problem when i try to deploy a installer for Mac version.I download CCPLauncher for Mac.When i launch it i only can select Serial Number License & Named License its different from Windows version which is i can download Device Named License.Can ur team help me ASAP because i have to deploy to 24 sites around Malaysia by next week.And for your information I'm buy a education licensing.

Packager Links https://forums.adobe.com/thread/1586021
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Cannot find '\\file\name'. Verify the path or Internet address is correct. Cannot find any answer any where in this forum.

I cannot find any answer any where in this forum. PLEASE Help!!! I'm receiving this error message every I click on the link, this only happen
on the desktop, but Laptop has no problem to access the file, and everyone else in my group --they don't have issue.
Run Windows 7 Enterprise SP 1, IE ver 9 and 11
Thanks in advance.
Akira

Hi,
Could please clarify the steps to reproduce this issue? Did this issue occur when clicking on a link in an email message within Outlook?
If I didn't misunderstand it, please first try to log into the web mail to check if this issue persists.
If problem didn't exist in webmail, please try to open your Internet Explorer with no add-on mode to troubleshoot the issue. See:
http://support.microsoft.com/kb/976915/en-us
If above didn't fix the issue, please try to reset your Internet Explorer to check the result:
http://support.microsoft.com/kb/923737/en-us
Note: Resetting Internet Explorer isn't reversible, and all previous settings are lost after the reset.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Connection failed and cannot check firmware status

I subscribe internet for mobile services..But I repeatedly receive notification saying connection fail and I cannot check the firmware status although I already type the #0000#

Hello johnjoel, the number to check the firmware is *#0000#. For the connection failed error check that the setting is correctly configured. Or ask your operator to send the settings via sms and then save it and set it as the default one.
Nokia C7

Download and conversion fails with msg...."Must close dialogue box to continue." I have no such box

download and conersion of pdf to word fails with msg, "cannot download until you close dialogue box." I have no such box open. How to proceed?

Hi,
If you are using createPDF or exportPDF services, please submit your question to their forum at http://forums.adobe.com/community/createpdf.
Thanks,
Wenlan

How to display the device name during file sending with Bluetooth

I get this Message:
File Receive Conformation
Do you want to receive a file from 00:13:70:69:95:84?
My Question is how can it display the device name not the device address?
Message was edited by: hazzaa

The same situation when I want to send photo from mobile phone to my notebook. I didnt find any option how to change it.
When I send photo from notebook to the mobile phone the notebook name (device name) is displayed. Try to check external device properties. Maybe you will find there way to change it.

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted.

Device name missing - NW mobile - Handhelds- emulater-Connection Settings

Dear NW mobile developers,
In my handheld emulator in NWDS CE 7.1
i did not find a Device name field in Connection setting screen.
I am following bellow link to configure handheld emulator
http://help.sap.com/saphelp_nwmobile71/helpdata/en/46/7fb5964ca22327e10000000a114a6b/content.htm
please help me to resolve the issue
lakshman balanagu
Edited by: lakshman balanagu on Mar 8, 2011 8:10 PM

Hi,
this document you use seems to be wrong.
You need to enter configuration details like system, ID, Port, client. Once done, you need to create a device in MI7.1 admin portal. In there you define the device by name and add a user to the device. You need to enable the device.
Once you have done this, you can sync your device and it will get the name of he device from MI Server. The default mapping between MI Server and device is done by username, not by devicename. So even if you would ener a device name on your device, it would be overwritten by middleware at first sync.
Also: be aware, you need to have a deic ein state Initial/enabled for this user before you snyc a device first time.
Hope this helps!
Regards,
Oliver

Profile manager enrolled device names

I have been playing around with profile manger on 10.7.3 enrolling and iPhone and a couple of iPads.
The iPhone enrolls correctly and the name in the devices tab shows the device name "xxx's iphone" and I can see the information about the device including encryption, apps installed etc.
Both iPads appear to enroll correctly however instead of showing "xxx's iPad" they show the device name of "New Device". I even tried pre-enrolling the device using the serial number and UUID and gave the device a meaningful name, however when then enrolling the device it accepts the enrollment and promptly chnages the name from the meaningful name back to "New Device".
I have tried this on both and iPad 2 and iPAd 3 running the latest IOS.
I also notice that the jobs that communicate with the device to collect the device informantion never complete, where they do for the iPhone.
I am sure this was working before the IOS 5.1 update.

I would try demoting your Open Directory server from Master to Standalone in the Server Admin app - there's an assistant in Server Admin > Open Directory > Settings > General > click the change button.
Once it's demoted to a standalone, restart.
From there, don't create an OD Master again - go to Profile Manager in Server.app and run through the wizard again. In the process, it will create an OD Master for you.
Hope that helps,
Chris

HTPC lcd display changing device names at boot

I'm having troubles with configuring LCD panel on my HTPC casing lcd display.
It is constantly swapping between /dev/lcd0 and /dev/lcd1 device names every boot, making it work only sometimes, when the device name matches the device described in LCDd.conf
I have Antec Veris remote casing with imon driver. Is there possibility to force system to use only either /dev/lcd0 or /dev/lcd1

Use udev rules to make a persistent name (like how /dev/sda can also be found in /dev/disk/by-*) and then direct LCDd.conf to that persistend name rather than /dev/lcd*
This will be a good place to start your quest: https://wiki.archlinux.org/index.php/Ud … vice_names

RV 120W:How to block device from connected to interner through device name?

Hi guys,
i am using the router,rv 120w
can i block device from connected to internet through device name?
for example,the Android Phone wil always has "android" in their device name.How can i block the device which has "android" in their device name from link to internet?
Thanks.

Good morning
Thanks for using our forum
Hi Louis, my name is Johnnatan and I am part of the Small business Support community. You can´t block any device by the name, however you can block devices using it mac-address. Go Firewall> Access Control>Mac Filtering in this section you can specify the mac address of the devices and block them.
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Lucreate fails w/msg cannot check device name d41 for device path abbre

Similar Messages

Maybe you are looking for