Lucreate fails with: Root slice device ... for BE ... is not a block device

Hi,
I'm running lucreate on a Sol10u7 x86 system as I wanted to get it to u8 level. I installed:
SUNWlucfg
SUNWlur
SUNWluu
from u8 and then a patch: 121431-58
System is not zoned and it is on ZFS with following pools:
pool: rpool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
c1t0d0s0 ONLINE 0 0 0
errors: No known data errors
pool: spool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
spool ONLINE 0 0 0
c0t0d0 ONLINE 0 0 0
This is what happens:
Creating Alternative Boot Environment..
lucreate -n s10x_u8
Checking GRUB menu...
Analyzing system configuration.
No name for current boot environment.
INFORMATION: The current boot environment is not named - assigning name <s10x_u7wos_08>.
Current boot environment is named <s10x_u7wos_08>.
Creating initial configuration for primary boot environment <s10x_u7wos_08>.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
PBE configuration successful: PBE name <s10x_u7wos_08> PBE Boot Device </dev/dsk/c1t0d0s0>.
Comparing source boot environment <s10x_u7wos_08> file systems with the
file system(s) you specified for the new boot environment. Determining
which file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <s10x_u8>.
Source boot environment is <s10x_u7wos_08>.
Creating boot environment <s10x_u8>.
Cloning file systems from boot environment <s10x_u7wos_08> to create boot environment <s10x_u8>.
Creating snapshot for <rpool/ROOT/s10x_u7wos_08> on <rpool/ROOT/s10x_u7wos_08@s10x_u8>.
Creating clone for <rpool/ROOT/s10x_u7wos_08@s10x_u8> on <rpool/ROOT/s10x_u8>.
Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/s10x_u8>.
Creating snapshot for <rpool/ROOT/s10x_u7wos_08/var> on <rpool/ROOT/s10x_u7wos_08/var@s10x_u8>.
Creating clone for <rpool/ROOT/s10x_u7wos_08/var@s10x_u8> on <rpool/ROOT/s10x_u8/var>.
Setting canmount=noauto for </var> in zone <global> on <rpool/ROOT/s10x_u8/var>.
ERROR: Root slice device </dev/dsk/c1t0d0s0> for BE <s10x_u8> is not a block device: .
ERROR: Cannot make file systems for boot environment <s10x_u8>.
Please help,
Cheers,
Tom

devfsadm fixed the issue,

Similar Messages

SOLARIS 10 with iSCSI Problem "not a block device"

Hi Guys.
I almost reached it to build an iscsi connection with a Netgear readynas 2100.
But I have still one Point which makes me a Problem!!!
Everything works, except mounting the device....
It always Sais me: "not a block device"
At the bottom you can see an output of the whole configuration that I did.
Has anybody maybe a tip for me? Thanks in advance, Mischa
login as: root
Using keyboard-interactive authentication.
Password:
Last login: Fri Dec 18 01:18:30 2009 from pnm
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
Sourcing //.profile-EIS.....
root@sun001 # iscsiadm list discovery
Discovery:
Static: disabled
Send Targets: disabled
iSNS: disabled
root@sun001 # iscsiadm modify discovery -s enable
root@sun001 # iscsiadm modify discovery -t enable
root@sun001 # iscsiadm modify discovery -i enable
root@sun001 # devfsadm
root@sun001 # devfsadm -C
root@sun001 # ping 172.16.251.215
172.16.251.215 is alive
root@sun001 # iscsiadm list discovery
Discovery:
Static: enabled
Send Targets: enabled
iSNS: enabled
root@sun001 # iscsiadm add discovery-address 172.16.251.215
root@sun001 # iscsiadm list discovery-address
Discovery Address: 172.16.251.215:3260
root@sun001 # iscsiadm list discovery-address -v
Discovery Address: 172.16.251.215:3260
Target name: iqn.2009-12.Z-NAS-B0204:znaszim
Target address: 172.16.251.215:3260, 1
root@sun001 # format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t60014052E198270014ED001000000000d0 <DEFAULT cyl 65267 alt 2 hd 255 sec 63> znaszim1
/scsi_vhci/disk@g60014052e198270014ed001000000000
1. c3t0d0 <DEFAULT cyl 17747 alt 2 hd 255 sec 63>
/pci@7b,0/pci1022,7458@11/pci1000,3060@2/sd@0,0
2. c3t2d0 <DEFAULT cyl 17747 alt 2 hd 255 sec 63>
/pci@7b,0/pci1022,7458@11/pci1000,3060@2/sd@2,0
Specify disk (enter its number): ^C
root@sun001 # dev
devattr devfree devfsadm devinfo devlinks devnm devreserv
root@sun001 # dev
devattr devfree devfsadm devinfo devlinks devnm devreserv
root@sun001 # dev
devattr devfree devfsadm devinfo devlinks devnm devreserv
root@sun001 # devfsadm -c iscsi
root@sun001 # iscsiadm list target -S
Target: iqn.2009-12.Z-NAS-B0204:znaszim
Alias: LIO Target
TPGT: 1
ISID: 4000002a0000
Connections: 1
LUN: 0
Vendor: LIO-ORG
Product: FILEIO
OS Device Name: /dev/rdsk/c1t60014052E198270014ED001000000000d0s2
root@sun001 # mkdir /export/iscsi
root@sun001 # mount /dev/rdsk/c1t60014052E198270014ED001000000000d0s2 /export/iscsi/
mount: /dev/rdsk/c1t60014052E198270014ED001000000000d0s2 not a block device
root@sun001 #
-----------------------------------------------------------------

Ok. Sorry i have to explaine it in an other way.
The Storage Device is a Netgear Ready NAS 2100.
Netgear Ready NAS with a Linux os.
The OS Supports different Protocols like: CIFS / FTP / HTTP/ iSCSI etc...
Now im trying to use an other protocoll (cifs) to store the data on the Netgear NAS.
i found smbclient and was able to open a connection to the NAS.
root@sun001 # /usr/sfw/bin/smbclient //172.20.0.51/video_net -U usrvideo
Password:
Domain=[Z-NAS-A0111] OS=[Unix] Server=[Samba 3.4.5]
smb: \> ls
. D 0 Tue Feb 23 11:12:04 2010
.. D 0 Thu Feb 18 10:38:52 2010
172.22.1.58.lnk A 747 Fri Feb 19 19:18:37 2010
172.22.1.55.lnk A 747 Fri Feb 19 18:41:07 2010
65535 blocks of size 33553920. 65535 blocks available
smb: \>
Is there a way to mount the smb connection when the server starts up?
I have to find a way to attach the NAS like a local folder...
And that is why i choose iSCSI before..
Regards
mischa
Edited by: mischu on Feb 26, 2010 2:34 AM

When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.

I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567

Standard Data Collection Failing with Error ORA-04054: database link does not exist.

Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,

Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1)

Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...

Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer

Received a email from Apple stating that my Apple ID was used for a purchase not on my device. It had a link to cancel purchase but asked for my email and password which I gave then it wanted my credit card info! I didn't give that,what should I do?

Received a email from Apple stating that my Apple ID was used for a purchase not on my device. It had a link to cancel purchase but asked for my email and password which I gave then it wanted my credit card info! I didn't give that,what should I do? Do you think this is just a way to get my credit card information?

It sounds like a phishing email. You can't "cancel" purchases. You've now given them your AppleID and password, so you should immediately change your password to something new and very secure.
Also watch out for suspicicious activity on your account.

Can't have ASM mark a NFS file as an ASM disk : -is not a block device

Hello,
I’m trying to experiment with ASM for learning purpose. Because I don’t have access to a SAN, I am trying to use NFS files but I can’t manage to have ASM mark those files as ASM disks.
[root@localhost /]# /etc/init.d/oracleasm createdisk ASM_DISK_1 /mnt/asm_dsks/dg1/disk1
Marking disk "ASM_DISK_1" as an ASM disk: [FAILED]
The oracleasm log says: File "/mnt/asm_dsks/dg1/disk1" is not a block device
OK, more context now:
I am trying to install ASM on a RHEL5 virtual machine (on vmware).
[root@localhost /]# uname -rm
2.6.18-8.el5 x86_64
I followed this document:
http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html until I got stuck at the following command:
/etc/init.d/oracleasm createdisk ...
Now, the NFS filesystem comes from a Solaris 10 system (the only one that's available) running on a physical sun box (this one is not a virtual system).
I have tried many combinations. I tried creating the files on the linux VM, using dd. As root, as oracle. I tried creating them on the Solaris side, using mkfile... no matter what I try, I always get the same issue.
I tried to follow this document: Creating Files on a NAS Device for Use with ASM (http://download.oracle.com/docs/html/B10811_05/app_nas.htm#BCFHCIEC)
But nothing seems to work.
Any idea, recommendations?
Thanks,
Laurent.

Hi buddy,
I guess the metalink note 731775.1 should help You.
In fact the procedure is:
- Create the disk devices on your NFS directory (using dd)
- Adjuste the permissions over those files (in this case, oracle:dba)
- Adjust the ASM_DISKSTRING at the ASM instance and setting the NFS directory in the discovery path
- Verify if they are available at v$asm_disk view
- Create the diskgroup using the the NFS disks that You have created.
Hope it helps,
Cerreia

File is not a BLOCK device

Hi,
Trying to configure ASM on this device and getting the error:
eating /dev/oracleasm mount point: /dev/oracleasm
Loading module "oracleasm": oracleasm
Configuring "oracleasm" to use device physical block size
Mounting ASMlib driver filesystem: /dev/oracleasm
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
File "/oracle/asm/disks/nfsdisk1" is not a block device
File "/oracle/asm/disks/nfsdisk1" is not a block device
File "/oracle/asm/disks/nfsdisk1" is not a block device
Cleaning any stale ASM disks...
Unmounting ASMlib driver filesystem: /dev/oracleasm
Unloading module "oracleasm": oracleasm
Loading module "oracleasm": oracleasm
Configuring "oracleasm" to use device physical block size
Mounting ASMlib driver filesystem: /dev/oracleasm
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...
File "/oracle/asm/disks/nfsdisk1" is not a block device
What has been done:
dd if=/dev/zero of=/oracle/asm/disks/nfsdisk1 bs=8192 count=100000
100000+0 records in
100000+0 records out
819200000 bytes (819 MB) copied, 90.3162 s, 9.1 MB/s
also:
/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface [oracle]:
Default group to own the driver interface [dba]:
Start Oracle ASM library driver on boot (y/n) [y]:
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver: [ OK ]
Scanning the system for Oracle ASMLib disks: [ OK ]
not sure what else to do..
thanks

Hi,
To create Oracle ASM disks, there are some steps to do:
- Have raw Disks, and you don't have then you can create a pseudo disks with the command dd us yours.
- Install ASMLib
- Use the /etc/init.d/oracleasm to configure, create ASM disks
The command dd creates a pseudo-block disk, and this a solution: Create virtual RAW disks for Oracle ASM on Linux with single Hard Drive
# dd if=/dev/zero of=/asm/disk4 bs=1M count=2000
# losetup /dev/loop4 /asm/disk4
# /etc/init.d/oracleasm createdisk ASM4 /dev/loop4
After the creation, you should scan your ASM disks: Wadhah DAOUEHI - Creation of ASM disks on Oracle Linux using ASMLib
# /etc/init.d/oracleasm scandisks
# /etc/init.d/oracleasm listdisks
Best regards

Im unable to find in Apple Mobile Device USB Driver is not listed in device manager

i tried all option like uninstall my itunes and get latest and reinstall and factory reset my iphone5
but still my iphone is not reconzie under device manger , im unable find Apple Mobile Device USB Driver is not listed under device manger onmy windows7

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

Mount: not a block device

i have created a solaris lun and trying to view the same from my solaris console. i want to perform i/o operations on the lun; how do i mount it? 'coz mount command gives "not a block device" error.

It depends on the specific driver, but you usually want to mount the 'dsk' device and not the 'rdsk' device.
Darren

DB installs fails with [INS-30060] Check for group existence failed

Hi folks
as user jjayet I'm running on OEL 5.6 64 bits the following command to install DB 11gR2 :
$ /mntmats/SOAVM0504/AUTO_WORK/dbzip_shiphome/database/Disk1/runInstaller -ignoreSysPrereqs -invPtrLoc /ade/jjayet_dte9672/oracle/work/DATABASE1/oraInst.loc -force -silent -waitforcompletion -responseFile /ade/jjayet_dte9672/oracle/work/DATABASE1/db.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 15258 MB Passed
Checking swap space: must be greater than 150 MB. Actual 16454 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_06-07-54AM. Please wait ...[FATAL] [INS-30060] Check for group existence failed.
CAUSE: Unexpected error occurred while trying to check for group existence.
$ id
uid=511053(jjayet) gid=8500(dba) groups=8500(dba),59031(oinstall)
the problems seems relater to accessing /tmp
as the local disk is not enough to use the default /tmp (the DB install will fail with full disk error as the local disk space is very low )
I've created a partition from new disk to /tmp which I have then mounted (default is nfs3) :
# mount /dev/xvdc1 /tmp
# mount
/dev/xvdc1 on /tmp type ext2 (rw)
the result of DB install into /tmp is :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-xr-x 2 jjayet dba 4096 Apr 5 06:36 CVU_11.2.0.2.0_jjayet
drwxrwxrwx 7 root root 4096 Apr 5 06:36 .
if I umount /tmp but use the local /tmp
re-running the DB installer as user jjayet it does not raise the error above
and now local /tmp contains :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-x--- 10 jjayet dba 4096 Apr 5 06:25 OraInstall2012-04-05_06-25-28AM
drwxr-xr-x 3 jjayet dba 4096 Apr 5 06:25 CVU_11.2.0.2.0_jjayet
drwxrwxrwt 5 root root 4096 Apr 5 06:25 .
do you know how to use tmp over nfs with user jjayet so that the DB can install properly ?
it seems that the files created as user jjayet into mounted /tmp are not identified properly
thks in advance
jean

thks for the pointer
I found the post you mention but it does not help
it does not explain the root cause of the problem but just propose a workaround to pass an option to installer which will popi\up an interactive messgae at install time
as installation is done automatically through ADE / DTE I cannot use this workaround
any expert in oracle DB install can help ?
thks
Jean

Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics

Dear Experts,
I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA.
In BI Dev, I use the option Necessary Object.
While importing request into BI QA, it fails with a return code 12. Some of the errors are:
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
System error in lock management
Error AD 025 during after import handling of objects with type(s) IOBJ
Start of the after-import method RS_IOBC_AFTER_IMPORT for object type(s) IOBC (Activation Mode)
Error when checking the InfoObjectCatalog 0CHANOTASSIGNED
InfoObject 0ABCINDIC is not available in active version
InfoObject 0ABCPRC_TYP is not available in active version
InfoObject 0ABCPROCESS is not available in active version
InfoObject 0ACCT_TYPE is not available in active version
InfoObject 0ACTIONREAS is not available in active version
This goes on for lot of infoobjects. If I were to goto RSA1 of BI QA and check any of the above objects, they are 'INACTIVE'.
But they are 'ACTIVE' in BI Dev.
Please help me in resolving this issue.
Thanks and BR,
Raj Jain

Hi I.R.K,
I recreated a trasnport for just one Infoobject (0ABCINDIC) which was one of the objects not active as shown in the logs of BI QA while transport.
I did not make any changes or delete any data etc. I then just transported these request from BI Dev to BI QA.
The transport was successful with return code 0. I then checked this object in RSD1 of BI QA and it was activated.
Any ideas what may be the cause???
Thanks,
Raj Jain

Set-AzureServiceDiagnosticsExtension or publishing with diagnostitcs enabled fails with Azure SDK2.5 for existing Azure services

Similar to https://social.technet.microsoft.com/Forums/systemcenter/en-US/487234f4-9748-4f49-ab7b-ce523da4c500/publish-cloud-service-fails-from-visual-studio-2013-update-4-published-asset-entry-for-image but since the given answer provides no solution
and I found more details, I felt that opening this new question providing more details was necessary.
I have an existing Azure service with two web roles (service and worker) published first in May 2012. Recently I tried to update from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD
and in doing so, of course directly move to the new diagnostics version. So before publishing I enabled WAD diagnostics logging in the properties of both roles.
Trying to publish from Visual Studio to the exisiting Azure Service fails, VS output shows the following lines:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
What's working 1: For testing purposes, I have created a new Azure service in the Azure portal.
Publishing the same solution from the same development environment to this new service is possible without problems - the service with WAD diagnostics logging is working fine. Unfortunately this is no solution to my production service, with
DNS alias and SSL certificates bound to the existing Azure service.
What's working 2: Publishing the solution to the existing Azure service WITHOUT diagnositics enabled works.
Problem with that: Trying to activate WAD diagnostics logging after publishing using the Azure cmdlets also fails WiTH a similar error message. Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx I
tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced by a new deployment, so I compared both services using Azure cmdlet Get-AzureService.
I found that the new service has properties which the old one is missing:
ExtendedProperties : {[ResourceGroup, myazureservice], [ResourceLocation, North Europe]}
Is this a hint? Reinstalling or repairing Visual Studio is not the answer to this problem!!!
What's the meaning of "Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml"?
[Perhaps MS will publish a newer version of its Azure cmdlets, but that's not today's story]
So what are possible reasons or fixes for this behaviour? Going back to log4net is not my favorite. Even worse, while there are alternative logging solution,
I currently have no performance counter monitoring in the Azure portal (Remote desktop and perfmon is NO solution). Is there any alternative to going back to SDK2.4?
Best regards,
Andreas

Hi Andreas,
Thanks for your feedback.
I will test and reproduce your issue on my side. Any information, I will post back for you.
Thanks for your understanding.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Update trigger fails with value too large for column error on timestamp

Hello there,
I've got a problem with several update triggers. I've several triggers monitoring a set of tables.
Upon each update the updated data is compared with the current values in the table columns.
If different values are detected the update timestamp is set with the current_timestamp. That
way we have a timestamp that reflects real changes in relevant data. I attached an example for
that kind of trigger below. The triggers on each monitored table only differ in the columns that
are compared.
CREATE OR REPLACE TRIGGER T_ava01_obj_cont
BEFORE UPDATE on ava01_obj_cont
FOR EACH ROW
DECLARE
v_changed boolean := false;
BEGIN
IF NOT v_changed THEN
    v_changed := (:old.cr_adv_id IS NULL AND :new.cr_adv_id IS NOT NULL) OR
                 (:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NULL)OR
                 (:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NOT NULL AND :old.cr_adv_id != :new.cr_adv_id);
END IF;
IF NOT v_changed THEN
    v_changed := (:old.is_euzins_relevant IS NULL AND :new.is_euzins_relevant IS NOT NULL) OR
                 (:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NULL)OR
                 (:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NOT NULL AND :old.is_euzins_relevant != :new.is_euzins_relevant);
END IF;
[.. more values being compared ..]
    IF v_changed THEN
    :new.update_ts := current_timestamp;
END IF;
END T_ava01_obj_cont;Really relevant is the statement
:new.update_ts := current_timestamp;So far so good. The problem is, it works the most of time. Only sometimes it fails with the following error:
SQL state [72000]; error code [12899]; ORA-12899: value too large for column "LGT_CLASS_AVALOQ"."AVA01_OBJ_CONT"."UPDATE_TS"
(actual: 28, maximum: 11)
I can't see how the value systimestamp or current_timestamp (I tried both) should be too large for
a column defined as TIMESTAMP(6). We've got tables where more updates occur then elsewhere.
Thats where the most of the errors pop up. Other tables with fewer updates show errors only
sporadicly or even never. I can't see a kind of error pattern. It's like that every 10.000th update
or less failes.
I was desperate enough to try some language dependend transformation like
IF v_changed THEN
    l_update_date := systimestamp || '';
    select value into l_timestamp_format from nls_database_parameters where parameter = 'NLS_TIMESTAMP_TZ_FORMAT';
    :new.update_ts := to_timestamp_tz(l_update_date, l_timestamp_format);
END IF;to be sure the format is right. It didn't change a thing.
We are using Oracle Version 10.2.0.4.0 Production.
Did anyone encounter that kind of behaviour and solve it? I'm now pretty certain that it has to
be an oracle bug. What is the forum's opinion on that? Would you suggest to file a bug report?
Thanks in advance for your help.
Kind regards
Jan

Could you please edit your post and use formatting and tags. This is pretty much unreadable and the forum boogered up some of your code.
Instructions are here: http://forums.oracle.com/forums/help.jspa

Lucreate fails with: Root slice device ... for BE ... is not a block device

Similar Messages

Maybe you are looking for