LV Operator Interface: Cleaning Data Report Space

Hi, I'm using Test Stand 3.1 and LabView 7.1, I have a LV Operator Interface and I'd like to reset (clean) Data Report space between Sequences execution. I have tryed everything with no success.
Thank you,
Massimo Ponte

Hi,
When you say "on the next execution", do you mean your test is being run with Test UUTs and after each UUT that is tested you want the report to be blank? Or are you referring to each time you run it with single pass, you would like the report window to be cleaned? Also are you using the full featured operator interface or the simple one? If you give us a little more detailed explanation of what you are looking for, we can try and help.
Pat P.
Software Engineer
National Instruments

Similar Messages

Clear report in report window of simple operator interface

Hello,
hello I want to clear the report-window of the simple operator interface at the beginning of each UUT test.
I want that there is nothing inside this window while testing a UUT. Only at the end of a test I want to show the actual report
How is this possible?
regards samuel

Report.Reset should replace the current report data with the data in the string you specify, which in your case should be blank.
Do you have a PreUUT Sequence in your Client Sequence File?
If not try adding the first step in the attached sequence below the Report.Reset step in your PreUUT sequence. You may need to add the second step as well (below both new steps). Not sure if the second step is required. The first step tells the teststand engine that the report has changed, the second tells it to refresh all windows.
Regards
Steve
There are 10 types of people in the world that understand binary, those that do and those that don't.
Attachments:
UI Update.seq ‏18 KB

Displaying operating unit specific data in Discoverer Report ????

Hi Experts,
My Requirement : I need to develope one custom report where it has to display operating unit specific data based on the resposibility selection in Discoverer.
My Approach : I prepared the below query and I am trying to pick Business_group_id from profile options and passing to the query.(You can observe the condition which is highlighted as red color)While i am running the query I am getting zero records.
Please suggest me how to achieve the my requirement of displaying operating unit specific data in Discoverer.
SELECT A1.PERSON_ID
       ,A1.employee_number
       ,A1.first_name
       ,A1.last_name
       ,A1.known_as PREFERRED_NAME
       ,A1.GENDER
       ,A1.date_of_birth
       ,A1.Marital_status
       ,A1.original_date_of_hire
       ,A1.Organization
       ,A1.Location
       ,A1.Job_name
       ,A1.OLF_DEPARTMENT
       ,A1.OLF_DEPT_SUBGROUP
       ,A1.salary
       ,A1.salary_change_date
       ,A1.HIRE_DATE
       ,A2.PERSON_ID SUPERVISOR_ID
       ,A2.EMPLOYEE SUPERVISOR
       ,A3.PERSON_ID SUPERVISOR_ID_1
       ,A3.EMPLOYEE SUPERVISOR_NAME_1
FROM (
SELECT PAPF.first_name
      ,PAPF.last_name
      ,papf.known_as
      ,papf.sex GENDER
      ,papf.date_of_birth
      ,papf.marital_status
      ,papf.employee_number
      ,PAPF.person_id
      ,PAAF.supervisor_id
      ,PAPF.original_date_of_hire
      ,(SELECT name FROM hr_all_organization_units WHERE Organization_id=PAAF.organization_id) Organization
      ,(SELECT location_code FROM hr_locations WHERE location_id=PAAF.Location_id) Location
      ,(SELECT name FROM per_jobs WHERE job_id=PAAF.job_id) Job_name
      ,PPP.proposed_salary_n SALARY
      ,ppp.change_date salary_change_date
      ,ppgk.segment1   OLF_DEPARTMENT
      ,ppgk.segment2 OLF_DEPT_SUBGROUP
      ,papf.original_date_of_hire HIRE_DATE
FROM per_all_people_f PAPF
      ,per_all_assignments_f PAAF
      ,per_pay_proposals PPP
      ,PAY_PEOPLE_GROUPS_KFV ppgk
WHERE 1=1
   AND PAPF.person_id=PAAF.person_id
   AND papf.business_group_id=paaf.business_group_id
   AND PAAF.assignment_id=PPP.assignment_id
   AND paaf.people_group_id=ppgk.people_group_id
   AND ppp.change_date =(SELECT MAX(change_date)
                           FROM per_pay_proposals
                          WHERE assignment_id=PPP.assignment_id)
   AND SYSDATE BETWEEN PAPF.effective_start_date AND PAPF.effective_end_date
   AND SYSDATE BETWEEN PAAF.effective_start_date AND PAAF.effective_end_date<font color="red">AND PAPF.BUSINESS_GROUP_ID = TO_NUMBER(FND_PROFILE.VALUE('PER_BUSINESS_GROUP_ID '))</font>
) A1
SELECT PAPF.first_name
||','||PAPF.last_name EMPLOYEE,PAPF.PERSON_ID,PAAF.supervisor_id
FROM per_all_people_f PAPF
      ,per_all_assignments_f PAAF
WHERE PAPF.person_id=PAAF.person_id
AND papf.business_group_id=paaf.business_group_id
   AND SYSDATE BETWEEN PAPF.effective_start_date AND PAPF.effective_end_date
   AND SYSDATE BETWEEN PAAF.effective_start_date AND PAAF.effective_end_date
) A2
SELECT PAPF.first_name
||','||PAPF.last_name EMPLOYEE
     ,PAPF.PERSON_ID
      ,PAAF.supervisor_id
FROM per_all_people_f PAPF
      ,per_all_assignments_f PAAF
WHERE PAPF.person_id=PAAF.person_id
AND papf.business_group_id=paaf.business_group_id
   AND SYSDATE BETWEEN PAPF.effective_start_date AND PAPF.effective_end_date
   AND SYSDATE BETWEEN PAAF.effective_start_date AND PAAF.effective_end_date
) A3
WHERE 1=1
AND A2.PERSON_ID(+)=A1.SUPERVISOR_ID
AND A3.PERSON_ID(+)=A2.SUPERVISOR_ID
AND A4.PERSON_ID(+)=A3.SUPERVISOR_ID
;

you are in the wrong forum, try an ebusiness-related forum, maybe this OA Framework

Reporting on Operation Level costing / Operational Account assignment data

Hi folks,
Please can anyone here with experience in dealing with extracting Operation Level costing (OLC) / Operational Account assignment (OAA) data for Maintenance Orders share their experience.
We have done some basic checking around this and Account assignment at activity level has been enabled. Been trying to use 0PM_OM_OPA_2 extractor to get this Operational Account assignment data but no luck.
Perhaps PM Consultants familiar with OLC/OAA solution can help answer this. What are the tables to look at for getting to this Operational Account assignment data?
Any clues will be appreciated.Thanks for your help!

Ravi,
transactions IW40N and IW49N.
Adilson

SCOM 2007 R2 Reporting space is not launching

Dear Experts,
My Report layer is not launching from SCOM 2007 Operation Console since 1 week.
Recently I did change the password for Data Warehouse Read and Write accounts also I have updated both passwords in the Administration Space at Account section for the both Accounts.
2nd thing i have updated the DW Read account pwd with the Service name SQL Reporting Services (MSSqlServer).
Still I am getting the Error when I launch the Reporting space from the Operation Manager Console and the error is stated that Login failure and unable to login to the Data Warehouse database.
Please let me know what else place I have missed to update the new pwd here ??
Saravana Raja

check and make sure the following procedures were done to update the passwords:
http://blogs.technet.com/b/randymonteleone/archive/2010/03/12/changing-password-on-scom-data-warehouse-run-as-accounts.aspx
hope this helps!
Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
Please remember to click “Mark as Answer” on the post that helps you!
my new blog om2012.wordpress.com

I am trying to use the T. S. operator interface I need to add pass fail and error

Hello:
I am using Labview 6.1 and Test Stand 2.0
I have made some modification to a copy of the T.S. Labview operator interface. How do I get the pass/fail or error from test stand to be pass to LabView so I can tell the operator that the unit pass or fail the test. I do not want to use the Test UUTs. I want this to be very low operator response.
Message Edited by Toro on 02-28-2006 01:52 PM

Not sure if this is available in the earlier versions of TestStand, but I think so.
You could post a UI Message, from your execution entry point in the process model, to your User Interface indicating the pass/fail/error status when a test run is complete. You will need to handle the UI Message in your Operator Interface. See TestStand II Customisation course notes for handling UI Messages.
The data passed in the UI Message can be anything you like, the UI Message handler in the User Interface will have to process the message and update the display as required.
Hope this helps
Steve
Message Edited by SercoSteve on 03-01-2006 10:02 AM
There are 10 types of people in the world that understand binary, those that do and those that don't.

Getting Error while Interfacing the Data in OM

Hi Gurus,
i am getting following error while i am running the interface in order management for interface the data into standard tables
the error is as follows
"This Customer's PO Number is referenced by another order" . This error is for the header table
"You are trying to insert an existing order or update an order that does not exist. Please enter a correct operation code. ;" . This error is for the Lines table
can anyone help me out wat is the cause and solution for it.
any inputs is highly appreciable.
thanks

Hi,
Please refer to following metalink document :
Sales Order Import Fails With Error Customer Po Number Referenced By Another Ord [ID 778895.1]
Regards,
Vikas

Error Loading a VI of a sequence in operator interface (Error Code -18002)

I am deploying a teststand sequence using LabVIEW adapter. After deploying, while running this sequence in operator interface in the deployment computer, I get an error saying that a particular step could not be loaded. This step calls a DIO initialization VI which basically uses DIO Port Config.vi from Traditional DAQ 7.4.4 version. Please see the attached image.
Software Versions Used: Teststand 4.0.1f1, LabVIEW 8.5, Traditional DAQ 7.4.4, Simple OI shipped with Teststand, windows XP
From couple of links from www.ni.com, I did following actions in my development computer:
1. Compile All the VI in LV 8.5 using Mass Compile including Traditional DAQ LLBs, simple operator interface etc.
2. Check if any VI or step is not broken.
After getting the error, I tried opening the same sequence in sequence editor in deployment computer (I am also including sequence editor with the deployment utility), I checked DIO Initialization step. I see the warning in step indicating that the VI is either broken or one of its sub is not located. I tried using Reload VI Prototype, it asks for LVDAQ.dll which is also bundled in my deployment files. After specifying this dll, I can run this sequence without errors but after I exit from sequence editor, it does not save the changes and I get the same error in Operator interface as well in sequence editor after re launching. Also I dont want to reload VI prototype as I dont expect some to do this change after deploying the testsequence.
Kindly help.
Thanks in advance.
Nirmal
Attachments:
Auto_Cal_18002 Error11.JPG ‏25 KB

I found solution for this. While creating the workspace for my sequence and other files, I used to include all the files including the LabVIEW VIs. Doing this, DIO Config VI seemed getting confused while searching for LVDAQ.DLL in the deployment computer.
I tried only including the test sequence and letting the teststand deployment utility select the VIs from the specified directory resolved this issue. I observed that in this case, all the sub vi and the support dlls gets placed in the support and data folder respectively. This resolved the issue.
Regards,
Nirmal

Help with "The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written. (Error code -36)" Any ideas on how to fix this?

While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.

That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library.

The Finder can't complete the operation because some data in "Adobe Acrobat" can't be read or written. (Error code - 36)

I recently did a clean install on a 2011 MacBook Pro with Mavericks. Went to install Adobe Acrobat 9 with the DVD media and about 3/4 of the way through the install, the install stopped and the following window appeared: The Finder can't complete the operation because some data in "Adobe Acrobat" can't be read or written. (Error code - 36). I've tried to install a few times and get the same message. Is Adobe Acrobat 9 incompatible with Mavericks. I've seen some posts on Apple Support Communities indicating that it is indeed compatible, but no explanation why the error pops up.

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

External HD issue. Finder cannot complete the operation because some data..

Last night I had a drive throw the error "finder cannot complete the operation because some data in "<file>" could not be read or written. Error code-36". I thought it was a bad disk. Then tonight I plugged in a flash drive, formatted it on the machine and now I am getting the same error on that disk as well. Any thoughts???

Yes, you can have bad blocks or other physical damage on a usb drive, the same as a firewire, or eSATA. Just because you can reformat the drive, doesn't mean the drive is okay. You reformat, yet the problem recurs. That is a sign of a bad drive. If it were an OS issue then the reformat should fix it.
You might want to check the drives with a utility from Prosoft called DriveGenius It's the "Swiss Army Knife" of utilities, including the ability to repartition "on the fly" (A little scary for my tastes). But Prosoft is a trusted software manufacturer. Downloaded the trial (it has more bells & whistles than you can believe) But the trial will run all hardware tests without the repair feature, and give you a report.
Also, you can download and use Applejack for repair.
-mj

EDI 850's Interface File Data program errors out

This is interface dile data program completes in error for EDI 850. Prior to this we had issues saying "error starting toolkit", but that was resolved by the DBA's. Now that error has gone and this error is coming up.
Below is the error message:
Version 12.1.3
DB : 11g
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_TRANSACTION_TYPE='POO'
P_FILE_PATH='/interface/infvmmci/ECRP2/outgoing'
P_FILE_NAME='VMMC850.dat.20120702215742'
P_MAP_CODE='EC_POO_FF'
Execution options
VERSION=2.0b ORIENTATION=LANDSCAPE
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-1401: 'p_run_idformula': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: 'p_run_idformula': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Mon Jul 2 21:58:53 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 5710284.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Kindly help,
Ganapathy

Please see if these docs help.
Interface File Data Program Fails With REP-1401 Error [ID 1415103.1]
850 POI Inbound EDI ECEPOI Error ORA-29284: file read error. [ID 565059.1]
Running Interface File Data, Completes With Error. [ID 563879.1]
How to Ensure Outbound 856 (DSNO) documents are generated [ID 1432829.1]
Thanks,
Hussein

TestStand 4.0 Operator Interface Changes Not Seen

Hi guys,
Ive worked with TestStand before, but now im trying to modify the operator interface (located C:\Program Files\National Instruments\TestStand 4.0\UserInterfaces\NI\Simple\LabVIEW). Well, i try to modify the VI in the project, but i cant see my changes when i run the VI. Ive tried building the executable and see that hte executable does get rebuilt, but none of my changes show up.
Also, how does the "entrypoint 1" button get renamed to something else when the VI actually runs?
thanks
jeff

Looking at the help, it appears that the TestStand button only uses the system color unless it is in toolbar mode. If you want to use a LabVIEW button instead, you can implement the button action by calling <SequenceFileViewMgr>.GetCommand(...).Execute().
This thread might help you determine when to dim or enable the button: http://forums.ni.com/ni/board/message?board.id=330&message.id=15720
Here is the button help:
BackColor Property
Syntax
Button.BackColor
Data Type
Color
Purpose
Specifies the background color for the Button control.
Remarks
When you set Style to ButtonStyle_ToolBar, this setting applies to the face and border of the button. When you set Style to ButtonStyle_Standard, the button face adheres to the system settings, and this setting affects only the border of the button.
See Also
ButtonStyles
ForeColor
Style

Suddenly Error -17306 in LV-Operator-Interface after 3 hours when trying to read a StationGlobal

Hello,
i´m using the example-labview-operator-interface with some modifications.
One
of the changes is that i created a Thread (UserEcentCallback.vi) which
reads a value from the StationGlobals and displays it on the OP.
This
thread is running in a loop and executed every second. This worked fine
for ~ 3hours and suddenly the attached error-message appeared.
What can i do to prevent this problem?
I´m using the default "TestStand Get Property Value.vi" to read the Globals.
Thanks for all tips.
(Sorry for double posting, buut i dont know if this is a labview or teststand-problem)
Attachments:
error4.JPG ‏66 KB

Hi,
That seems a strange one, especially seeing the VI before it must have found the property ProjectParameter as it read State_Mode without problems.
I guessing ProjectParameter is still present in your StationGlobals after the error occurred!
As to what to do, you could do a Check to make sure the property exists before reading the data.
Regards
Ray
Regards
Ray Farmer

Programatically Loading Several Sequences Using LV Simple Operator Interface

I am playing around with the supplied LV(2009) Simple Operator Interface for running TestStand (4.2) and hoping that someone can point me in the right direction.  I know this may be too generic for a concise solution, but hopefully I can get some suggestions on the best approach for this. Here is a short description of what I am trying to accomplish.
I am testing 2 unique UUTs on a single test fixture that is controlled by a PCI-7831R DAQ. Each UUT will have a unique serial number and report generated. Therefore, I am using 2 unique sequence files created using TestStand. Basically, I want to be able to read in a barcode on the test fixture and have the operator interface load the 2 unique sequence files based on information contained in the barcode. The operator will then hit a button to start the sequence file executions.  I want the first sequence file to run and test the first UUT. Once the first sequence file is finished, I want the second sequence file to load and run on the second UUT.
I can use the simple operator interface to load both sequence files. I then have to select the combo box to select which one I want to run. This works fine, however, I am trying to automate this so that the operator doesn't have to open the files and continually use the combo box to select sequence files.
Any ideas or suggestions would be greatly appreciated.

I have figured out a solution (for my initial application at least) of programmatically loading the sequence files. When the operator interface first starts, there is a prompt where the user will scan a barcode that is loaded on the front of the fixture. For all of our product lines, we will have a unique format for the fixture barcode. Included in this barcode is a product specific software ID number. I create a folder with the same software ID number and store the sequence files there. I then parse the barcode and open all *.seq files in that folder. I have this working correctly now.
Once the sequence files are opened, the user must scan each UUT ID barcode before installing them on the fixture. The intent is to have both UUTs installed on the fixture at the same time so they can be tested serially.  If, however, they do not scan one of the UUTs, it will not be tested. Basically this is due to the fact that they may want to run only a single board. Once all of the UUT barcode scanning has been completed, I have another button that will execute the sequence files using the 'Single Pass' execution entry point. I agree that the 'Single Pass' and 'Test UUTs' points should be hidden from the user. Once the execute test(s) button is pressed, it will check each UUT barcode to make sure that it is valid. If both UUT's have valid barcodes, it will run the first UUT and then the second using the 2 sequence files that were previously loaded, otherwise, it will run only one or the other. The UUT(s) will then be removed and the process starts over again from the UUT ID barcode scanning. They will not have to scan the fixture barcode again since the correct sequence files have already been loaded.
Currently I have the UUT/Sequence File associations hard-coded in the UI. I will need to put my thinking cap on so that as we increase the product lines (several are already in the pipeline) we can use the same UI without any modifications. Scalability is King!

LV Operator Interface: Cleaning Data Report Space

Similar Messages

Maybe you are looking for