LVS- Error in file provided on SDN
Hi
I have downloaded the SAP_Business_One_LVS_1_0.zip provided on SDN.
When i try to unzip so that i can install on my system , i get error. Can you please help with another file or provide a fix for this.
regards
Pankaj
Pankaj - has this been resolved? If yes, what did you have to do?
Thanks - Zal
Similar Messages
-
Previously I was using OSX 10.8 and Web Disk was working great.
Since I upgraded to OSX 10.9 Web Disk Dont Attach to my compputer and give me this ERROR:
FInder got an error: Network file permission error.
When I got this ERROR first time I searched GOOGLE and found this link: http://cammodude.blogspot.no/
And I did:
To force all connections to be SMB1:
Open A terminal window
paste in the following line followed by the return key(should be all on one line):
echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
What the command does:
Creates a file called nsmb.conf in your home directory at the path ~/Library/Preferences/nsmb.conf.
Adds directives to force SMB connections to use the SMB1 protocol. This is slower but stable.
Then I could use Web Disk on OSX 10.9 after executing this command in Terminal.
But now I restarted my Macbook and now Im NOT able to connect to Web Disk and get the same ERROR.
FInder got an error: Network file permission error
After trying 100 times it attaches 1 time but then show this ERROR:
Can't get <<class cdis>> "my.server.com/2078" of application "Finder".
If this happen then I can see the files in Finder and see the Contents and Size of files but if I open a PHP file in BBEdit then it shows BLANK.. But actually it is NOT blank.
Now Im stuck How can I solve this? All help is highly appericated..
Thank you so much...Hi,
Make sure to chmod the app, something like this :
chmod -Rf 777 secure_site_WebDisk.app
(in my case the CPanel provided the app for my OSx version.) -
Failed to load database information. Error in File temp_
Our environment:
Windows Server 2012 R2 Data-center Edition 64 bit
Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
.Net 4.5.51641
Crystal Reports for VS 2013 V13.0.9.1312
Oracle ODAC 11.2.0
We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information.
at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
Here is the app:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
Dim crReportDocument As New CrystalReport3()
Dim DataSet1 As DataSet
Dim adoOleDbConnection As OleDbConnection
Dim adoOleDbDataAdapter As OleDbDataAdapter
Dim connectionString As String = ""
connectionString = "Provider=OraOLEDB.Oracle;"
connectionString += "Data Source=ourdb;"
connectionString += "User ID=ouruserid;Password=ourpsw"
adoOleDbConnection = New OleDbConnection(connectionString)
Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
DataSet1 = New DataSet()
adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
crReportDocument.SetDataSource(DataSet1)
crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
crReportDocument.Refresh()
crReportDocument.PrintToPrinter(1, False, 0, 0)
DataSet1.Dispose()
adoOleDbDataAdapter.Dispose()
adoOleDbConnection.Close()
adoOleDbConnection.Dispose()
crReportDocument.Dispose()
Me.Close()
End Sub
End Class
Here is the app.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
</startup>
<system.windows.forms jitDebugging="true" />
</configuration>
We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
BruceLooking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce -
Crystal Report issue : Error in file.. .rpt . Error in formula
Hi ,
I recently migrated a report from production to test environemnt and it throws me the following error:
Error in File C:\DOCUME1\oe_user\LOCALS1\Temp\packing instructions {4058873B-9756-4052-B479-EBD2D0A08E7D}.rpt:Error in formula <Object_Visibility>. '{Command.EXACT_WEIGHT_FLAG} = "Ne (No)"'
This field name is not known.
In production server is installed Oracle 9i database and in test server is installed Oracle 10g
The report has 1 main report and 2 sub reports.
1. The same report works fine in production server without any issues.
2. I had executed the report in Crystal reports 2008 and it runs fine displaying all fields without any issues.
3. I had also tried taking the query of both subreports and the main report and tried executing it in oracle and it runs fine without any issues.
However during the runtime in the test server, it throws the following error.
Can someone help me out with this issue..Hi Siva,
What is the patch level of CR 2008?
Is it a win or a web app?
What is the server OS?
First, try to simply view the report. Let the report prompt for the database credentials and the parameter values if any.
See if it reproduces the issue.
ReportDocument rd = new ReportDocument();
rd.Load(Server.MapPath("CrystalReport.rpt"));
CrystalReportViewer1.ReportSource = rd;
Take a look at the SAP Note :
[1421867 - Error: This field name is not known|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433323331333833363337%7D.do]
Hope it helps,
Thanks,
Bhushan. -
Crystal report windows forms viewer - error in file
I am using visual basic - visual studio 2005 with crystal reports version 11.5 and am getting the following error when deploying to a windows 7 32 bit machine
Error in file
c:\users\username\appdata\local\temp\tempmanynumbersandcharacters.rpt
The request could not be submitted for background processing.
All six reports for this application give the same error. There is not a problem when it is deployed to a windows xp machine. I have three other applications that do not have problems in windows xp or windows 7 32 bit. I can't see any difference between these three apps and the one have a problem in windows 7.
Thanks,
JayYou do not mention if you searched the forums and the Kbase for the error... Using the search box in the top right corner of this web page will return KBases, Blogs, Wikis, articles and more. The following article should have been returned with a simple search;
[Causes of "Background Processing" error|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33]
See if it helps. If not, do a few searches as there may be other reasons not documented in the articles.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
HTTP Error 404 :File does not exist
Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekharI have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file. -
Error in File to IDOC Scenario
Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
VikasHello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna -
Error message: AgServerMigration ERROR Using store provider as a session is deprecated.
Hi. I'm using a MacBook Pro, OS X 10.6.5. I have been opening files in Lightroom, editing them, and then doing finishing touches in CS5. When I save the file in CS5 and close it, my Mac returns the above message in Console eight times:
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
AgServerMigration ERROR Using store provider as a session is deprecated.
I have no idea what this means, or whether it is a problem. Does anyone know what this is?
Thanks.I see the same thing and have done for some time. The actual file is being saved back. etc. So, in that respect both Lr and Ps are working fine. IOW, ignore it.
-
Error copying file when reinstalli​ng Windows
I saw where someone had posted a similar question, but saw no answers. Anyway, IBM sent me a set of recovery disks and a new hard drive (unit it still under warranty) and when I try to reinstall using the recovery disks provided, it stops during disk 2 of 6. The progress bar stops just short of the end of it, and the total progress bar stops about 1/3 of the way through. I used an identical set to reinstall the operating system (IBM sent me two hard drives and two sets of recovery disks, one for each unit) on an identical machine and had the same problem. I received this error message each time in a "recov32" window that popped up:
An error copying file D:\RECOVERY\CM2ZCUS.002
ERROR 23: DATA ERROR (CYCLIC REDUNDANCY CHECK).
What does this mean and how can I resolve it? When I hit "OK", it goes on to ask for disk 3 of 6, and so on.
And while attempting the installation on both systems, it asked for a supplemental product recovery disk (the disk says product recovery supplemental disk) just prior to insertion of disk 1 of 6.....I put that disk in the drive and scant seconds later., then iit asks for it again after disk 6 of 6 has been installed. Is that normal? Then when it tells me to power up again, I can't do it using the restart button on that page.....the window is not responsive and i have to it shut it down buy manually pressing the on button. Appears to repeat the installation all over again.
At any rate, both installations have not been successful in restoring Windows XP Professional on these machines, and I'm in dire need of a solution!!
moderator note: edited post to proper sentence case for readability. please do not post in all caps as it makes things impossible to read. any further posts in all caps will be deleted without warning.Sorry about the caps....didn't realize it'd be difficult to read.
Anyway, regarding the possibility of scratched/damaged setup disks......I have two sets, one for each laptop, and both give me the error when I try to reinstall. Seems pretty coincidental that both sets would be damaged, unless IBM makes it a habit to send out faulty software. But I tried again, got the same error when Disk 2 was installing....I went ahead and clicked OK, it asked for the third disk and darned if it popped up with the same error, but with a different file (BKD047A.IMZ). However, I'm continuing the installation in spite of the errors, but don't hold out much hope that it will be successful. If it isn't, I'll try a set of XP Pro boot disks. If that fails, I'll try an installation CD for another laptop. After that, I don't know, unless I call IBM again and have them send me replacements for the two sets of disks. Unless anyone else has another idea?? -
Java.util.zip ZipException Error Opening File
I have code that uploads a file in my strut then i change its extension to .zip and want to extract that file.
(please note that the file is create under zip and renamed as .xtr before upload, when user uploads it we change its name to zip. I am telling here so that u can see there s nothing wrong with the file. Soem how, I can also extract it from windows. )
when my code runs, and it tried to read entries in the enumeration, it says "error opening file". I am not posting the code because, I hve used many examples and it has nothing to do with the code.
My problem is as i mentioned above, my files` name is changed may be its handler doesnt quiet. more over i hve tried the code with upload a zip file. After upload it says the same.
Can any one provide me a clue to move around ??when my code runs, and it tried to read entries in
the enumeration, it says "error opening file". I am
not posting the code because, I hve used many
examples and it has nothing to do with the code. Then I would suggest you fix your code to tell you what the error is. Printing the stack trace would be a good start. -
Well Im trying to create a Return PO using ME21N. Im giving all the parameters and values. But While saving its generating an Error.
it states "Error calling Data Provider".
What could be the possible error . Any clues?
Can you please elaborate abt this error?
helpful answers would be rewarded with deserving points.
Thanks
Manu KapurHi
Please check if you are missing '\' character after directory name and before file name in file path. I resolved this issue keeping '\' character after directory name in path.
Thanks
Shravan -
Function Gui_Download - Error calling Data Provider
Hello masters, i develop a program that catches a pdf file and then we can download. in windows everything is working but the client uses Linux and SAP Gui For Linux and when is making download of file, systems throws message FES011 - Error calling Data Provider.
when i'm using windows the path is build correct way but i'm using Linux the path isn't build correct, for example like this, /home/rui/desktop\dir_1000.pdf . in debug i changed \ to / but systems throws the same error message.
Someone have some clue to solve this problem.
CONCATENATE gv_dir '\DIR_' <fs_final_alv>-pernr
'.pdf' INTO lv_fich.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = lv_fich
filetype = 'BIN'
TABLES
data_tab = lt_pdf_output
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
regards and thanks in advance.
Mariohello masters, thanks to all.
Soumyaprakash was right... just because Linux is case-sensative, the system was putting all letters of path in upper case
I just change in screen painter the field to accept upper/lower letters and now system mantain the letters has they come.
regards and thanks one more time
Mario -
Error in file-file scenario: HTTP response contains status code 503
Hi folks,
I've encountered the foll error in file-file scenario:
Testing file-file scenario (followed the blog: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&)
Initially i was hving problems with recvr comm channel, which are now resolved. File is sent successfully but not recvd. I tried to modify the scenario above and change the file type to 'Text' but still got the same error.
I've checked SICF -->default_host/xi/engine , we dont maintain logon data there. when i test the default_host/xi/engine service, it resolves into an ip addr as follows:
http://<hostname>.<domain.com>:8001/sap/xi/engine?sap-client=<clientNo>
(Also, we hv a BW system running on the same server ,which uses a fully qualified domain, while we dont which is why we get the above domain. Im not sure if there are any issues with that.)
and we get the foll error:
Error Code 10060: Connection timeout
If i remove the domain manually, im prompted for userid/pwd and get the foll result:
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine?sap-client=<clientNo></SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID , which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=811)</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
also, we dont hv any overload issues as this is dev env and not many of us are using the xi server. Would really appreciate if any of you can share your inputs on how to resolve this. Thanks!!
cheers
PrachiHi ,
Look in to this for all errors
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
<b>Award Points if found usefull.</b> -
Web template :Error Valid Data provider not assigned
Hello Friends we have the web template that was working before , we did the upgrade to SP13 from SP11.
It gives the error Valid Data provider not assigned and
Bad integer Parameter value of Parameter BLOCK_COLUMNS_SIZE of Object item:ANALYSIS_ITEM:ANALYSIS;
Please help where do i need to assign the Data provider beacuse the Values are same for Dataprovider as before
Portal Runtime Error
An exception occurred while processing your request
Exception id:
See the details for the exception ID in the log file.
Thanks
Soniya
Message was edited by:
soniya kapoorOpen the template in WAD and do a validation against the server and make sure the template is well formed.
Also make sure you apply BI JAVA Patch 1 for SPS 13. -
Outlook 2010 error - The file is corrupt and cannot be opened
Hi experts
Im getting the error - "The file is corrupt and cannot be opened", when opening office attachments in outlook 2010.
I’ve tried disabling the protected view options in office which hasn’t fixed the issue, the only suggestion I have seen which I’m sure would work is to delete
the user profile and recreate. This seems a bit over kill to me, does anyone know what files I need to remove to fix the issue.
ThanksHi,
You can try using the Fix it tool in the following KB article to fix the issue:
http://support.microsoft.com/en-us/kb/2387587
Hope this helps.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
hi, i need to display Outstanding Liability GRNs in my report. for that report, i have created a Logical Database. The structure of ldb is, BSIS>Bkpf->Bseg--->Rseg My Input fields GL Account Plant
-
Question about using HTMLDB_UTIL.CLEAR_PAGE_CACHE (pg)
Hello, I have a page which uses HTMLDB_UTIL.CLEAR_PAGE_CACHE(xx) at the end of after submit process which is executed after select list with submit changes its value. I was expecting that the session state for all items on the page would be cleared (
-
Coming from an iBook G4 and going to an iMac G5...
Hi people. As the title states really! I'm really looking forward to it as my iBook is about 5 years old. It still works perfectly, but it's time for an update and for my photo editing, i need a bigger screen. I have a few questions though. It's not
-
Importing Configuration is taking lot of time
Hi If I am importing configruation using xml file, it is taking more than half an hour. can we make it fast? sometimes I have observed, it is failing in this import. Regards, Praveena
-
Hi, I have a basic query regarding RFC and BAPI call. I wanted to know whether a BAPI/RFC in a SAP system can be called from any other application system or it can be called from only SAP system. Also, what are the sytem/network requirements for such