Lync 2010 server status shows "Retrieving" in Control Panel

When I open Control Panel on my Lync 2013 FE server, all my 2013 FE servers show a status of normal and a green check mark under replication. For my legacy 2010 server, the status just says Retrieving. Replication with the 2010 is OK. Is this normal? Not
a big deal because we will be decommissioning the 2010 anyway. I don't see any errors in the Lync server log for the 2010.
One thing that is strange though with the 2010 server is I can run setup, Step 2 (Bootstrapper) and it runs fine. Puts a green check mark and says Complete. If I exit and re-run setup, it looks like Step 2 wants to be run again. the green check mark goes
away. CMS has been moved to 2013 about a month ago and everything is fine. Only reason I am keeping the 2010 around is because we are still using the 2010 Edge. Edge is pointing to 2013 FE so I think the 2010 FE is out of the picture completely (no users on
it) but I wanted to keep it around until we stand up a 2013 Edge. 2010 FE is current with cumulative updates.
From the Lync 2010 side, when I open Control Panel, everything looks good. All servers come up green with no issues. Looks like its just the 2013 FE trying to retrieve info from 2010.

Hi Shadowtuck,
the retrieving status you see via the Lync Server 2013 control panel for the Lync Server 2010 front end is normal behaviour
and nothing to be concerenced about, as is the the green tick not showing for step two in the deployment wizard. I have seen this behaviour in all Lync Server 2010 to Lync Server 2013 migrations I have performed for customers. Thanks.
Regards.
http://www.b4z.co.uk

Similar Messages

Lync 2013 client still show titles that is turned off on Lync 2010 server

Hi All
I have another unique issue it seems.
Environment - Lync Server 2010 on CU5. Lync 2010 and Lync 2013 client.
The client has used absconfig and removed the titles as the don't want that to be displayed.
The lync 2010 clients does not show the titles - so that is working.
Lync 2013 from external access the titles does not show - so that is working.
Internally on the LAN the Job Titles shows on the Lync 2013 client - so not working.
What I've tried so far :
Disabled exchange contact sync on a client policy
Used webdownload only for address book.
Using registry to force download of address book.
Deleted the Lync folder on the client computer to make sure when it downloads the .idx and .db file that it is the latest version.
None of the above remediations seems to have any impact on the lync 2013 client.
I have tried to replicate this in my lab (without an exchange server) and the the lycn 2010 and 2013 clients behave as they should be not displaying the job titles.
Having anyone come across this before?
I will be patching the lync 2010 server to the latest CU update, but I think the issue is somewhere else.
Any suggestions will be appreciated.
Regards
Danie

Hi Danie,
I suggest you could install the latest CU update first, because the CU update would fix many problems.
In addition, shall we test Lync 2013 on a fresh computer without Outlook?(You could test this using Lync 2013 Basic).
Best regards,
Eric

Lync 2010 Server - Tracking Lync Login Sessions Related to MaxEndpointsPerUser and its threshold

Hello All,
I am having a few users who get the message from their Lync 2010 & 2013 client (on Lync 2010 Server) stating:
"Please sign out at another location and try again. You have reached the maximum number of computers or devices allowed."
I confirmed with the users they are using only one client.
Is there a way to view all endpoints logged in per user? I understand increasing the value for "MaxEndpointsPerUser" may solve our problem but it will not fix the multiple unknown endpoint logins per user Lync seems to detect.
Here's my configuration:
Get-CsRegistrarConfiguration
Identity : Global
MinEndpointExpiration : 300
MaxEndpointExpiration : 900
DefaultEndpointExpiration : 600
MaxEndpointsPerUser : 8
EnableDHCPServer : False
Any guidance would be greatly appreciated.
Thanks,
Jay

This is great I was able to find 14 connections by using your method then I pinpointed description of all 14 connections by using:
https://gallery.technet.microsoft.com/office/List-last-time-a-User-b905cf5f
Thanks so much for your help!

Windows server 2008 can't access control panel and can't choose "properties" under "my computer"

Hello everyone!
Today after a schedule restart on the night I thought everything was normal with my server. But When i go to "start -> control panel" it show me "empty". And if I try to lunch "change/remove software" via search window in
"start" then nothing happen.
I know also that I can't right click on "computer" and choose "properties" in the start-menu.
Also another problem. I did install Fbackup to make schedule file backups on the night. The software worked well to launch when I had installed it, but after the night, this morning it just crash on launch.
I can also tell that I did add from 4 CPU core to 6 CPU cores.

Hi,
Have you tried to see if the issue persists when you boot into Safe Mode? Since you it shows blank when accessing Control Panel, please check if the policy setting below has been
configured.
Please choose Start – Run - type (gpedit.msc) - click on (Administrative Templates) - (control Panel) -
Prohibit access to Control Panel and Show only specified Control Panel applets. If they were configured, please disable them to see if it could resolve the issue.
In addition, the issue may also be caused by the virus, please run a system scan to see if there is any virus. At this time, you can also launch Control Panel apps from the command
line, and here's a list of .cpl files for your reference that you can print out:
Accessibility Options
access.cpl
Add/Remove Programs
appwiz.cpl
Add Hardware Wizard
hdwwiz.cpl
Automatic Updates
wuaucpl.cpl
Bluetooth Properties
bthprops.cpl
Display Properties
desk.cpl
Firewall Properties
firewall.cpl
Game Controllers
joy.cpl
Internet Options
inetcpl.cpl
iSCSI Initiator
iscsicpl.cpl
Java Control Panel
jpicpl32.cpl
Licensing Mode
liccpa.cpl
Mouse Properties
main.cpl
Network Connections
ncpa.cpl
Network Setup Wizard
netsetup.cpl
ODBC Properties
odbccp32.cpl
Power Options
powercfg.cpl
Regional and Language Options
intl.cpl
Sound and Audio Devices
mmsys.cpl
Stored Passwords
keymgr.cpl
System Properties
sysdm.cpl
Telephone and Modem Properties
telephon.cpl
Time and Date Settings
timedate.cpl
User Accounts
nusrmgr.cpl
Windows Security Center
wscui.cpl
Wireless Link
irprops.cpl
Hope this helps.
Regards,
Andy Qi
Andy Qi
TechNet Community Support

Boot Camp Partition no longer shows in StartUp Control Panel

My Boot Camp partition no longer shows in StartUp Control Panel, but does show up using Option Key at startup. This started soon after the latest Parallels update. The Boot Camp partition seems normal and healthy in the finder. Once started via the Option Key, Windows XP-SP3 runs fine. Upgrading to BC 3.0 did not have any affect.
I've tried LOTS of troubleshooting strategies, including completely deinstalling Parallels. Deleting obvious preferences, etc.. No joy.
Any suggestions?

Hi,
if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
(Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
But as long as the Option-key is working maybe you can live with it.
Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
Regards
Stefan

Bit Locker encription Problem not showing in my control panel

i am using windows 7 64 home premium
in my control panel
Bit
Locker encription driver is not showing
please guide me how i will about how this driver will show in my control panel

BitLocker is not available in Windows 7 Home Premium, you need to be running Windows 7 Enterprise or Ultimate to be able to use BitLocker.
Blogging about Windows for IT pros at
www.theexperienceblog.com

What is Conexant D850 PCIV.92 Modem tv_confMgrErr35? How to fix it. Also how to get flash player to show up in control panel (not showing up)

What is conexant D850PCIV.92 Modem tv_configMgrErr35? How to fix this.
Why doest flash player show up in control panel --to clear cache--How to fix it also. Java doesnt show upn in the control panel since I updated it either.

kestark
This is Vista.
Go to the Inspiron 1525 support page. Find the small blue "Change OS" and click on the arrow. Select Vista.Then download and install these 3 items with a restart between each one.
1. Dell System Software in the System Utilities category.
2. Intel Mobile Chipset in the Chipset category.
3. Sigmatel audio driver in the Audio category.
See if it works any better after you get the Sigmatel driver installed.

Lync 2010 user status report.

Hi,
is there any way to get the status history of every Lync user.. i.e. when he/she went offline/busy or whatever status end user has changed ?
Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

There are no more errors, or are you still getting the 19213 error above? No 19213 error found.
And I want to make sure I'm clear, the monitoring server, front end server, and SQL server are three separate
servers right? No collocation?
No, The monitoring server is collocation with SQL Server.
The front end server is enterprise pool separate server.
Front end server have one error : Event ID 30508 archiving agent . but we don't ve archiving server.

Lync 2010 server and UM role on different domains in different forests

Hello
I have a Lync 2010 environment running on domain A, with exchange 2010 UM also running in Domain A. We are in the process of migrating users and mailboxes from domain A to domain B. Once we reach our enterprise voice users with exchange UM enabled
we will need to install the exchange UM role on the exchange server in Domain B.
There is a 2-way trust relationship between domain A and domain B.
All the users from are running Lync on a PC located in Domain B, using Lync credentials from Domain A.
Are there any issues running Lync 2010 and Exchange UM from different domains in different forests? Is it as simple as creating a new UM DialPlan and UM IP Gateway to the domain A Lync FQDN?
Thanks

Hi,
Each UM forest must be configured to trust the forest in which Lync Server is deployed, and the forest in which Lync Server 2013 is deployed must be configured to trust each UM forest. If Exchange UM is installed in multiple forests, the Exchange
Server integration steps must be performed for each UM forest or you’ll have to specify the Lync Server domain.
Here is a link about for UM of Lync server 2013 but similar for Lync server 2010:
http://technet.microsoft.com/en-us/library/jj966276(v=exchg.150).aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Webmin System and Server Status : shows Apache Webserver as 'Down' ?

Hi guys, I'm currently going through setting up my home server with Arch (first time Arch user).
I have apache installed alongside webmin.
In the 'System and Server Status' I am setting up some alerts and monitors but have noticed that 'Apache Webserver' is showing as down (it clearly isn't because I am viewing webmin from work, and I have SSH'd in to restart apache with success a few times). Also the module is not listed under 'Servers' - instead it is displayed under 'Unused modules' ??
Just wondering if there is something different with Arch that I need to point webmin to so it recognises Apache?
[ Also, same thing is happening with SSH being detected as down although it is working kind of - I believe my port-forward isn't working as I can only SSH to my desktop then to my server, not from web to server ]
Thanks for any help/advice

Hey just wondering if anybody has any ideas about this?
I managed to get the module showing up under 'Servers' but I still cannot figure out why both SSH and Apache are showing as 'Down' when they are clearly not

Lync 2013- HTML pasted in Lync 2010 client not showing

After the last round of Office 2013 updates I get blanks whenever one of my Lync 2010 coworkers pastes a number from a web page into their 2010 client window. I am using Lync 2013 v 15.0.4517.1005 32 bit. Thank you

I have the issue mentioned in this post where I can't view html content that another person pastes into a message they send me and also can't paste content from certain web pages into Lync directly and have to paste to a text editor and copy it there before
pasting into lync.
I noticed that if someone sends me content pasted from a web browser that I may see an empty box on my end rather than the content though in the history when viewing the conversation in outlook I see the actual text there.
For the issue with pasting, I found that the following html page when opened in Firefox 23.0.1 will reproduce the issue:
---------------- html page markup -------------------------------------
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3c.org/TR/1999/REC-html401-19991224/loose.dtd">
<html class="htmlStyle" xmlns="http://www.w3.org/1999/xhtml">
<head><title>Some Title</title></head>
<body>
    <form>
        <div>
            <div>
                <div>
                    <table>
                        <tbody>
                            <tr>
                                <td>
                                    <div>
                                        <div >
<div >
<div>
<div>
<div>
<div>
<div>
<table>
<tbody>
<tr>
<td>
<table>
<tbody>
<tr>
<td>
<div>
<p>

Text to copy

</p>
</div>
</td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>
</div>
</div>
</div>
</div>
</div>
</div>
                                        </div>
                                    </div>
                                </td>
                            </tr>
                        </tbody>
                    </table>
                </div>
            </div>
        </div>
    </form>
</body>
</html>
Steps to reproduce:
Open the attached html file in Firefox
Press CTRL + A to select all
Press CTRL + C to copy
Past into a message window
Results:
Nothing will be visible when pasting.
Expected Results:
"Text to copy" should be pasted into the message window.
This is reproduced using Microsoft Lync 2013 version 15.0.4517.1504 on Windows 8.
Note that this page doesn't reproduce the issue when following these steps in Internet Explorer 10 though I have seen the behavior when copying from an internal web application.
Alan

Inspiron 1525 not able to select internal mic for webcam, nor is it showing up on Control Panel, Sound, Audio Devices

Initial problem was Dell Webcam video recording records no sound.
In Control Panel, Device Manager, Sound Video and Game Controllers there are two High Definition Audio Devices listed: Location 1 (Internal High Definition Audio Bus) - I deduce this is the internal mic; and Location 2 (Internal High Definition Audio Bus) - I deduce this is external microphone jack. Both have the same driver version.
The Control Panel, Sound, Recordings Tab showed 2 devices that looked identical except the bars that show green with volume were only on the first one, which is also the default one, and would detect sound if you got real close to the webcam mic when talking. Both devices displayed as 'working'.
Accessories, Sound Recorder recordings are silent no matter how close you get to internal webcam mic.
Dell WebCam Audio Source tab has two selections, both reading Microphone (3 - High Definition Audio Device). Both selections record sound with the EXTERNAL MIC jack. There is no way to select the internal webcam mic, it is not an option.
Per instructions found on the web, I uninstalled the first device only in Device Manager and rebooted. The same driver version as before was installed. But now the settings have changed. Device Mgr still shows Loc 1 and Loc 2. However, under the Sound, Recordings tab there are still 2 devices, but the first one says 'currently unavailable' , is still the default, and the sound bars that go green for audio testing are on the SECOND device now instead of the first one. If you check the Properties for each device, they BOTH are showing the same location Location 2 (Internal High Definition Audio Bus), i.e., the external mic jack. Loc 1 device (built in mic) is not showing up!!
Accessories Sound Recorder works with the EXTERNAL mic. (How does it know which one to use, it's not giving me a choice?)
So the Location 1 device (internal mic) is not showing up anywhere besides the device manager. I want to use the internal mic for skype and webcam. Somehow I need to get the Loc 1 device to show up on the Sound - Recording tab and in the Webcam Audio Source list? What do I do?
Thank you in advance for your help.

kestark
This is Vista.
Go to the Inspiron 1525 support page. Find the small blue "Change OS" and click on the arrow. Select Vista.Then download and install these 3 items with a restart between each one.
1. Dell System Software in the System Utilities category.
2. Intel Mobile Chipset in the Chipset category.
3. Sigmatel audio driver in the Audio category.
See if it works any better after you get the Sigmatel driver installed.

HT1296 i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel

i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel

Hi glomp,
From the information provided, it sounds like your device may not be fully recognized by iTunes. Here are two articles (depending on your computer's operating system) for troubleshooting this:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Have a good one,
- Ari

Can't get Ultranav Tab to show up in Control Panel

Hi,
on my T61 (7663-13G) with Windows 7 64-bit, I don't seem able to get the Ultranav tab to show up under "Mouse" in the Control Panel and thus am unable to edit the touchpad settings. My goal is to enable scrolling with my touchpad.
I tried reinstalling the newest Ultranav drivers for my OS ( http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66898 ) as well as the Utility a couple of times, in vain. The problem persists.
I've tried a few tips I found on related articles in Google, but nothing helped.
When reinstalling, I use the x64 driver since my system is 64-bit.
If you know about this problem and how to solve it (under a system similar to mine), I'd be glad to hear about it.
Thanks,
Steve

It's possible that the IntelliPoint driver did not properly uninstall itself. Before I went down that road, I would try this:
1) Uninstall both the UltraNav Driver and UltraNav Utility.
2) In the driver tab of the mouse properties in device manager, look to see if the roll back driver option is available.
3) If it is, do not roll back the driver but instead uninstall it and check the box to delete the driver software.
4) Repeat the process until the roll back driver option is not available, at which point you should be back to the generic driver that Windows 7 originally installed.
5) Install the UltraNav Driver from the top directory rather than the .\WinWDF\x64 directory (my best guess based on your original post). You could be missing part of Lenovo's customization process by using the subdirectory.
6) If everything is working as it should, install the UltraNav Utility for easier access to the UltraNav functions.
Don

Outlook 2010 not working with I cloud control panel.

Using:
Windows 7 PC
Outlook 2010
Problem free use untill now.
As of a 4 days ago my icloud control panel stopped syncing with my tasks, contacts and calenders to my Icloud account I am using as metioned outlook 2010 , I dont even see the I cloud sycn/refresh button located in the tool bar in outlook 2010. I have been using this plug in for nearly a year with out any problems untill now.
My Email works just fine.
I have tried signing in and out of I cloud, uninstalling the icloud conroll panel, using the repair function, uninstalling the Out 2010 non of which have helped.
ha anyone else had this problem or have an idea on how to resolve it?
Thanks

Why are you running Pocket Mirror, do you have a Palm device?
Uninstall Pocket Mirror, delete the 2 Pocket Mirror calendars, ignore 'My Calendar' the iCloud calendar is the one to use.
If you do not uninstall Pocket Mirror the calendars will keep recreating themselves

Lync 2010 server status shows "Retrieving" in Control Panel

Similar Messages

Maybe you are looking for